[ { "clsnam": "1001", "clsnbr": "01", "catnm1": "O-Rings", "catnm2": "", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "O-Rings_CategoryImage.jpg", "notes": "The O-ring is the most widely used seal in industry today. It is simple in concept, easy to install, can be used as a double-acting seal, can seal pressures to over 5,000 psi in static and dynamic applications and, best of all, is very economical. While simple in concept, it can be very sophisticated in its applications. O-rings are available in 349 standard inch sizes as set up by the Aerospace Standard 568 published by the society of Automotive Engineers. For O-ring sizes other than these standard AS sizes, specify the actual dimensions desired for the inside diameter (I.D.) and the cross section (W).", "grpatr": "", "grpflg": "N" }, { "clsnam": "2036", "clsnbr": "0101", "catnm1": "O-Rings", "catnm2": "Aflas O-Rings (TFE )", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "\u003CP\u003EThis compound provides an advantageous combination of high temperature, chemical and electrical resistance properties. \u003C/P\u003E\u003Cul\u003E\u003Cli\u003EStandard Inch AFLAS O-Rings sizes ranging from 1/32\u0022 I.D. to 26\u0022 I.D.\u003C/li\u003E\u003CP\u003E\u003Cli\u003ETrade Names: TFE\u003C/li\u003E\u003C/P\u003E\u003CP\u003E\u003Cli\u003EColour : Black\u003C/li\u003E\u003C/ul\u003E\u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "2037", "clsnbr": "010101", "catnm1": "O-Rings", "catnm2": "Aflas O-Rings (TFE )", "catnm3": "Inch Size AFLAS O-Rings", "catnm4": "", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "This compound provides an advantageous combination of high temperature, chemical and electrical resistance properties. It is different from fluoreleastomers such as FKM (FPM/Viton) types because of its unique composition (tetrafluorethylene/propylene copolymer). As a result, TFE (AFLAS) elastomers can provide service advantages in many chemicals, as well as in electrical applications. \u003Cul\u003E\u003Cli\u003EStandard Inch AFLAS O-Rings sizes ranging from 1/32\u0022 I.D. to 26\u0022 I.D.\u003C/li\u003E\u003Cli\u003ETrade Names: TFE \u003C/li\u003E\u003Cli\u003ETemperature range: -60 ºF to 200 ºF\u003C/li\u003E\u003Cli\u003EColour: Black\u003C/li\u003E\u003Cli\u003EHardness Range: 70 and 90 Shore A\u003C/li\u003E\u003C/ul\u003E¶¶O-rings available from stock in standard AS-568A sizes.", "grpatr": "Nominal Size I.D. (in) [Nominal I.D.]|Nominal Size O.D. (in) [Nominal O.D.]|Nominal Thickness W (in) [Nominal CS (W)]|Actual Size I.D. (in)[Actual I.D. (in)]|Actual Size I.D. (mm)[Actual I.D. (mm)]|Actual Thickness W (in)[Actual CS (in)]|Actual Thickness W (mm)[Actual CS (mm)]", "grpflg": "Y" }, { "clsnam": "1858", "clsnbr": "0102", "catnm1": "O-Rings", "catnm2": "Back-Up Rings", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_BackupRing.jpg|Back-UpRing_574_SectionDrawing_01.jpg", "notes": "Back-up rings are washer-like devices that are used to prevent a seal from extruding through any gaps while under pressure. These seals are installed in the downstream side of the gland. Back-up rings are not seals themselves, but are usually used in conjunction with O-rings in high-pressure applications (over 1500 psi) for support or as spacers.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1859", "clsnbr": "010201", "catnm1": "O-Rings", "catnm2": "Back-Up Rings", "catnm3": "Style 574 Back Up Rings", "catnm4": "", "catnm5": "", "imgnme": "DMR_BackupRing.jpg|Back-UpRing_574_SectionDrawing_01.jpg", "notes": "Molded of a 90A Durometer Buna-N Rubber. The 574 Style dished Cross section back-up rings provide excellent extrusion resistance. Stretched for installation, they return quickly to their original size for easy installation.\u003CBR\u003E\u003CSTRONG\u003EPLEASE NOTE:\u003C/STRONG\u003E Sizes (Dash NO.) Corresponds to standard o-ring numbers¶¶¶\u003Ctable\u003E¶\u003Ctr\u003E¶\u003Ctd\u003E\u003Cstrong\u003EPart Numbers\u003C/strong\u003E\u003C/td\u003E¶\u003Ctd\u003E\u003Cstrong\u003ET (ref)\u003C/strong\u003E\u003C/td\u003E¶\u003Ctd\u003E\u003Cstrong\u003EA\u003C/strong\u003E\u003C/td\u003E¶\u003C/tr\u003E¶\u003Ctr\u003E¶\u003Ctd align=\u0022left\u0022 \u003E574-004 thru 574-050\u003C/td\u003E¶\u003Ctd align=\u0022left\u0022 \u003E.049\u003C/td\u003E¶\u003Ctd align=\u0022left\u0022 \u003E.045+/-.003\u003C/td\u003E¶\u003C/tr\u003E¶\u003Ctr\u003E¶\u003Ctd align=\u0022left\u0022 \u003E574-102 thru 574-178\u003C/td\u003E¶\u003Ctd align=\u0022left\u0022 \u003E.053\u003C/td\u003E¶\u003Ctd align=\u0022left\u0022 \u003E.045+/-.003\u003C/td\u003E¶\u003C/tr\u003E¶\u003Ctr\u003E¶\u003Ctd align=\u0022left\u0022 \u003E574-201 thru 574-284\u003C/td\u003E¶\u003Ctd align=\u0022left\u0022 \u003E.050\u003C/td\u003E¶\u003Ctd align=\u0022left\u0022 \u003E.040+/-.003\u003C/td\u003E¶\u003C/tr\u003E¶\u003Ctr\u003E¶\u003Ctd align=\u0022left\u0022 \u003E574-309 thru 574-395\u003C/td\u003E¶\u003Ctd align=\u0022left\u0022 \u003E.076\u003C/td\u003E¶\u003Ctd align=\u0022left\u0022 \u003E.060+/-.004\u003C/td\u003E¶\u003C/tr\u003E¶\u003Ctr\u003E¶\u003Ctd align=\u0022left\u0022 \u003E574-425 thru 574-475\u003C/td\u003E¶\u003Ctd align=\u0022left\u0022 \u003E.117\u003C/td\u003E¶\u003Ctd align=\u0022left\u0022 \u003E.096+/-.005\u003C/td\u003E¶\u003C/tr\u003E¶\u003C/table\u003E", "grpatr": "ID (in)|Tol. (in)|W (in)|Tol (in)", "grpflg": "Y" }, { "clsnam": "1011", "clsnbr": "0103", "catnm1": "O-Rings", "catnm2": "Buna O-Rings (Nitrile)", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "\u003CP\u003EThis compound has excellent resistance to a wide variety of fluids, good tensile strength, high elongation, low compression set, and excellent resistance to abrasion and tear. Most 0-Rings are made of this material due to its good physical and mechanical properties.\u003C/P\u003E\u003Cul\u003E\u003Cli\u003EStandard Inch Buna O-Rings sizes ranging from 1/32\u0022 I.D. to 26\u0022 I.D.\u003C/li\u003E\u003Cli\u003EBoss Tube Fitting Buna O-Rings\u003C/li\u003E\u003Cli\u003EMetric Inch Buna O-Rings\u003C/li\u003E\u003Cli\u003EBuna (Nitrile/NBR)\u003C/li\u003E\u003Cli\u003E70 Duro\u003C/li\u003E\u003C/ul\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1101", "clsnbr": "010301", "catnm1": "O-Rings", "catnm2": "Buna O-Rings (Nitrile)", "catnm3": "Boss Tube Fitting Buna O-Rings", "catnm4": "", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "\u003CP\u003EDurometer: O-Ring sizes for Boss Tube Fittings are available in 70 Duro\u003C/P\u003E\u003CP\u003EApplication: providing a seal for straight-thread tube fittings on a boss. \u003CBR\u003ENumbering System: The two digits after the -9 represent the Tube Size O.D. in 16ths of an inch. For example -905 is sized for a Tube O.D. of 5/16\u0022. The one exception is for -901 where the Tube Size O.D. is 3/32\u0022.\u003C/P\u003E\u003Cul\u003E\u003Cli\u003EBuna (Nitrile/NBR)\u003C/li\u003E\u003Cli\u003E70 Duro\u003C/li\u003E\u003C/ul\u003E", "grpatr": "Tube Size O.D. (in)|Actual Size I.D. (in)|Actual Size I.D. (mm)|Actual O.D. (in)|Actual O.D. (mm)|Actual Thickness W (in)|Actual Thickness W (mm)", "grpflg": "Y" }, { "clsnam": "1023", "clsnbr": "010302", "catnm1": "O-Rings", "catnm2": "Buna O-Rings (Nitrile)", "catnm3": "Inch Size Buna O-Rings (AS 568)", "catnm4": "", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "\u003CP\u003EThis compound has excellent resistance to a wide variety of fluids, good tensile strength, high elongation, low compression set, and excellent resistance to abrasion and tear. This O-Ring is the most widley used seal due to its simplicity.\u003C/P\u003E\u003CP\u003E\u003C/P\u003E\u003CUL\u003E\u003CLI\u003ETemperature Range: -65 º F to 250 º F\u003C/LI\u003E\u003CLI\u003EUsual Colour: Black \u003C/LI\u003E\u003CLI\u003EHardness Durometer: 70 Duro \u003C/LI\u003E\u003CLI\u003ETrade Name: Chemigum®, NySyn, Hycar®, Paracril®, Kyrnac®\u003C/LI\u003E\u003C/UL\u003E", "grpatr": "Nominal Size I.D. (in) [Nominal I.D.]|Nominal Size O.D. (in) [Nominal O.D.]|Nominal Thickness W (in) [Nominal CS (W)]|Actual Size I.D. (in) [Actual I.D. (in)]|Actual Size I.D. (mm) [Actual I.D. (mm)]|Actual Thickness W (in) [Actual CS (in)]|Actual Thickness W (mm) [Actual CS (mm)]", "grpflg": "Y" }, { "clsnam": "1102", "clsnbr": "010303", "catnm1": "O-Rings", "catnm2": "Buna O-Rings (Nitrile)", "catnm3": "Metric Size Buna O-Rings", "catnm4": "", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "\u003CP\u003EMetric Size O-Rings in buna material \u003C/P\u003E\u003CP\u003ECross Section can be found from 1 mm up to 8.4 mm.\u003C/P\u003E\u003CP\u003ENumbering system is ID x Cross Section: Eg 5 mm ID x 1 mm Cross Section = 5-1 MM\u003C/P\u003E\u003CUL\u003E\u003CLI\u003EBuna (Nitrile/NBR)\u003C/LI\u003E\u003CLI\u003E70 Duro\u003C/LI\u003E\u003C/UL\u003E", "grpatr": "Nominal Size I.D. (mm)|Nominal Thickness W (mm)", "grpflg": "Y" }, { "clsnam": "2030", "clsnbr": "0104", "catnm1": "O-Rings", "catnm2": "EPDM O-Rings (Ethylene Propylene)", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "\u003CP\u003EThis Compound has a high tensile strength, elongation, good low temperature flexibility, outstanding heat aging.\u003C/P\u003E\u003Cul\u003E\u003Cli\u003EStandard Inch EPDM O-Rings sizes ranging from 1/32\u0022 I.D. to 26\u0022 I.D. \u003CP\u003E\u003C/li\u003E\u003Cli\u003ETrade Names: Vistalon, Epsyn, Fpcar, Royalene, Nordel\u003C/P\u003E\u003CP\u003E\u003C/li\u003E\u003Cli\u003EColour : Black \u003C/P\u003E\u003C/li\u003E\u003C/ul\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "2031", "clsnbr": "010401", "catnm1": "O-Rings", "catnm2": "EPDM O-Rings (Ethylene Propylene)", "catnm3": "Inch Size EPDM O-Rings", "catnm4": "", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "\u003CP\u003EThis Compound has a high tensile strength, elongation, good low temperature flexibility, outstanding heat aging, good electrical properties, excellent resistance to water, steam, acids, alkalis, ketones, Skydrol, phosphate, oxygen, weathering, ozone and brake fluid.\u003C/P\u003E\u003CP\u003EEthylene Propylene (EPDM) is not recommended for exposure to petroleum oils and solvents, and di-ester base lubricants. Good brake oil resistance, excellent heat resistance.\u003C/P\u003E\u003Cp\u003EStandard Inch EPDM O-Rings sizes ranging from 1/32\u0022 I.D. to 26\u0022 I.D. \u003C/p\u003E\u003CP\u003ETrade Names: Vistalon, Epsyn, Fpcar, Royalene, Nordel\u003C/P\u003E\u003CP\u003ETemperature range: -80 ºF to 300 ºF\u003C/P\u003E\u003CP\u003EColour : Black \u003C/P\u003E\u003CP\u003EHardness Range: 50-90 Shore A\u003C/P\u003E¶¶O-rings available from stock in standard AS-568A sizes.", "grpatr": "Nominal Size I.D. (in) [Nominal I.D.]|Nominal Size O.D. (in) [Nominal O.D.]|Nominal Thickness W (in) [Nominal CS (W)]|Actual Size I.D. (in)[Actual I.D. (in)]|Actual Size I.D. (mm)[Actual I.D. (mm)]|Actual Thickness W (in)[Actual CS (in)]|Actual Thickness W (mm)[Actual CS (mm)]", "grpflg": "Y" }, { "clsnam": "2034", "clsnbr": "0105", "catnm1": "O-Rings", "catnm2": "HSN-80 O-Rings", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "\u003CP\u003EHydrogenated Acrylonitrile Butadiene (HNBR), also known as Highly Saturated Nitrile (HSN) is superior to NBR in low brittle temperature, heat, oil, oil additive and sour oil resistance, and is far more resistant to sour gasoline and ozone than NBR. \u003C/P\u003E\u003Cul\u003E\u003Cli\u003EStandard Inch HSN-80 O-Rings sizes ranging from 1/32\u0022 I.D. to 26\u0022 I.D.\u003C/li\u003E\u003CP\u003E\u003Cli\u003ETrade Names: HNBR, Therban, Zetpol, Tornac\u003C/li\u003E\u003C/P\u003E\u003CP\u003E\u003Cli\u003EColour: Black \u003C/P\u003E\u003C/li\u003E\u003C/ul\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "2035", "clsnbr": "010501", "catnm1": "O-Rings", "catnm2": "HSN-80 O-Rings", "catnm3": "Inch Size HSN-80 O-Rings", "catnm4": "", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "Hydrogenated Acrylonitrile Butadiene (HNBR), also known as Highly Saturated Nitrile (HSN) is superior to NBR in low brittle temperature, heat, oil, oil additive and sour oil resistance, and is far more resistant to sour gasoline and ozone than NBR. ¶\u003Cul\u003E\u003Cli\u003EStandard Inch HSN-80 O-Rings sizes ranging from 1/32\u0022 I.D. to 26\u0022 I.D.\u003C/li\u003E\u003Cli\u003ETrade Names: HNBR, Therban, Zetpol, Tornac\u003C/li\u003E\u003Cli\u003ETemperature range: -40 ºF to 300 ºF\u003C/li\u003E\u003Cli\u003EColour : Black\u003C/li\u003E\u003Cli\u003EHardness Range: 80 Shore A\u003C/li\u003E\u003C/ul\u003E¶¶O-rings available from stock in standard AS-568A sizes.", "grpatr": "Nominal Size I.D. (in) [Nominal I.D.]|Nominal Size O.D. (in) [Nominal O.D.]|Nominal Thickness W (in) [Nominal CS (W)]|Actual Size I.D. (in)[Actual I.D. (in)]|Actual Size I.D. (mm)[Actual I.D. (mm)]|Actual Thickness W (in)[Actual CS (in)]|Actual Thickness W (mm)[Actual CS (mm)]", "grpflg": "Y" }, { "clsnam": "1985", "clsnbr": "0106", "catnm1": "O-Rings", "catnm2": "Kalrez O-Rings", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_kalrez_O-rings.jpg|O-Ring_CrossSection-01.jpg", "notes": "For demanding sealing applications when customers require the very best, Kalrez® parts manufactured only by DuPont Performance Elastomers, are the elastomer seals of choice. Supplied in standard O-rings or custom shapes, Kalrez® resists over 1,800 different chemicals while offering the high temperature stability of PTFE (327 ºC).", "grpatr": "", "grpflg": "N" }, { "clsnam": "1990", "clsnbr": "010601", "catnm1": "O-Rings", "catnm2": "Kalrez O-Rings", "catnm3": "Inch Size Kalrez O-Rings (AS 568)", "catnm4": "", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "Kalrez® perfluoroelastomer parts have virtually universal chemical resistance. They withstand attack from more than 1,800 chemicals, solvents and plasmas. Standardizing on Kalrez® products for broad chemical resistance reduces your need to keep multiple materials on the shelf, thus lowering cost of inventory.¶¶O-rings available from stock in standard AS-568A sizes.", "grpatr": "", "grpflg": "N" }, { "clsnam": "2608", "clsnbr": "01060101", "catnm1": "O-Rings", "catnm2": "Kalrez O-Rings", "catnm3": "Inch Size Kalrez O-Rings (AS 568)", "catnm4": "Kalrez Compound 0040", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "0040 compound is a black product specifically designed for low temperature environments where significant chemical resistance is required. Kalrez® 0040 parts maintain elasticity and seal force at temperatures unattainable by other perfluoroelastomers.¶¶O-rings available from stock in standard AS-568A sizes.", "grpatr": "Nominal Size I.D. (in) [Nominal I.D.]|Nominal Size O.D. (in) [Nominal O.D.]|Nominal Thickness W (in) [Nominal CS (W)]|Actual Size I.D. (in)[Actual I.D. (in)]|Actual Size I.D. (mm)[Actual I.D. (mm)]|Actual Thickness W (in)[Actual CS (in)]|Actual Thickness W (mm)[Actual CS (mm)]", "grpflg": "Y" }, { "clsnam": "2605", "clsnbr": "01060102", "catnm1": "O-Rings", "catnm2": "Kalrez O-Rings", "catnm3": "Inch Size Kalrez O-Rings (AS 568)", "catnm4": "Kalrez Compound 0090", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "0090 perfluoroelastomer parts deliver durable, reliable sealing solutions for applications requiring excellent rapid gas decompression (RGD) properties as well as high hardness and high modulus properties. Some application areas include downhole equipment such as drilling and completion tools as well as industrial equipment including pumps and valves.¶¶O-rings available from stock in standard AS-568A sizes.", "grpatr": "Nominal Size I.D. (in) [Nominal I.D.]|Nominal Size O.D. (in) [Nominal O.D.]|Nominal Thickness W (in) [Nominal CS (W)]|Actual Size I.D. (in)[Actual I.D. (in)]|Actual Size I.D. (mm)[Actual I.D. (mm)]|Actual Thickness W (in)[Actual CS (in)]|Actual Thickness W (mm)[Actual CS (mm)]", "grpflg": "Y" }, { "clsnam": "1991", "clsnbr": "01060103", "catnm1": "O-Rings", "catnm2": "Kalrez O-Rings", "catnm3": "Inch Size Kalrez O-Rings (AS 568)", "catnm4": "Kalrez Compound 1050LF", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "1050LF is a carbon black-filled product for O-rings, seals, and other parts used in chemical process industries. It has good hot water/steam, and excellent amine resistance. Kalrez® 1050LF is not recommended for use in organic acids, or inorganic acids at high temperatures.¶¶O-rings available from stock in standard AS-568A sizes.", "grpatr": "Nominal Size I.D. (in) [Nominal I.D.]|Nominal Size O.D. (in) [Nominal O.D.]|Nominal Thickness W (in) [Nominal CS (W)]|Actual Size I.D. (in)[Actual I.D. (in)]|Actual Size I.D. (mm)[Actual I.D. (mm)]|Actual Thickness W (in)[Actual CS (in)]|Actual Thickness W (mm)[Actual CS (mm)]", "grpflg": "Y" }, { "clsnam": "1987", "clsnbr": "01060104", "catnm1": "O-Rings", "catnm2": "Kalrez O-Rings", "catnm3": "Inch Size Kalrez O-Rings (AS 568)", "catnm4": "Kalrez Compound 4079", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "Compound 4079 - A low compression set compound for general-purpose use in O-rings, diaphragms, seals, and other parts used in the process and aircraft industries. It is a carbon black-filled compound with excellent chemical resistance, good mechanical properties, and outstanding hot air aging properties. It exhibits low swell in organic and inorganic acids and aldehydes and has good response to temperature cycling effects. A maximum operating temperature of 316 ºC [600 ºF] is recommended, with short excursions to higher temperatures possible. This compound is not recommended for use in hot water/steam applications or in contact with certain hot aliphatic amines, ethylene oxide, or propylene oxide.¶¶O-rings available from stock in standard AS-568A sizes.", "grpatr": "Nominal Size I.D. (in) [Nominal I.D.]|Nominal Size O.D. (in) [Nominal O.D.]|Nominal Thickness W (in) [Nominal CS (W)]|Actual Size I.D. (in)[Actual I.D. (in)]|Actual Size I.D. (mm)[Actual I.D. (mm)]|Actual Thickness W (in)[Actual CS (in)]|Actual Thickness W (mm)[Actual CS (mm)]", "grpflg": "Y" }, { "clsnam": "1988", "clsnbr": "01060105", "catnm1": "O-Rings", "catnm2": "Kalrez O-Rings", "catnm3": "Inch Size Kalrez O-Rings (AS 568)", "catnm4": "Kalrez Compound 6375", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "Compound 6375 - A carbon black-filled compound for general use in O-rings, seals, diaphragms and other parts specifically for the chemical process industry. This compound has excellent, broad chemical resistance, good mechanical properties, and outstanding hot-air aging properties. 6375 is well suited for use in mixed process streams because of its excellent resistance to acids, bases, and amines. In addition, it is the suggested compound for use in hot water, steam, ethylene oxide and propylene oxide. A maximum continuous service temperature of 275 ºC [525 ºF] is recommended.¶¶O-rings available from stock in standard AS-568A sizes.", "grpatr": "Nominal Size I.D. (in) [Nominal I.D.]|Nominal Size O.D. (in) [Nominal O.D.]|Nominal Thickness W (in) [Nominal CS (W)]|Actual Size I.D. (in)[Actual I.D. (in)]|Actual Size I.D. (mm)[Actual I.D. (mm)]|Actual Thickness W (in)[Actual CS (in)]|Actual Thickness W (mm)[Actual CS (mm)]", "grpflg": "Y" }, { "clsnam": "2606", "clsnbr": "01060106", "catnm1": "O-Rings", "catnm2": "Kalrez O-Rings", "catnm3": "Inch Size Kalrez O-Rings (AS 568)", "catnm4": "Kalrez Compound 6380", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "Compound 6380 is a non-black product specifically developed for chemical processes involving hot, aggressive amines. It has also been successfully used in applications involving highly oxidizing chemicals. In addition, it has excellent overall chemical resistance. This cream colored product is easily identifiable when selecting an O-ring material for harsh chemical plant services.¶¶O-rings available from stock in standard AS-568A sizes.", "grpatr": "Nominal Size I.D. (in) [Nominal I.D.]|Nominal Size O.D. (in) [Nominal O.D.]|Nominal Thickness W (in) [Nominal CS (W)]|Actual Size I.D. (in)[Actual I.D. (in)]|Actual Size I.D. (mm)[Actual I.D. (mm)]|Actual Thickness W (in)[Actual CS (in)]|Actual Thickness W (mm)[Actual CS (mm)]", "grpflg": "Y" }, { "clsnam": "1989", "clsnbr": "01060107", "catnm1": "O-Rings", "catnm2": "Kalrez O-Rings", "catnm3": "Inch Size Kalrez O-Rings (AS 568)", "catnm4": "Kalrez Compound 7075", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "Kalrez® Spectrum® 7075 broadens Kalrez® sealing options with a perfluoroelastomer that has enhanced physical performance properties including very low compression set (12% pellets/15% O-rings per ASTM D 395B) and improved seal force retention. It is a carbon black filled compound utilizing new and proprietary cure chemistry technology with mechanical properties designed for improving sealing performance in both high temperature environments and temperature cycling situations. 7075 joins the family of Kalrez® Spectrum® products designed for the chemical processing industry. To provide even greater sealing performance in dynamic applications where low friction is required, 7075 O-rings have a glossier finish than other Kalrez® parts. 7075 was specifically developed to be used as an O-ring or custom-sealing component in the chemical and hydrocarbon industries, with an improved thermal resistance that extends maximum service temperature to 327 ºC (620 ºF). Kalrez® Spectrum® 7075 offers the enhanced elastomeric properties outlined above while providing a chemical resistance better than the industry standard set by Kalrez® 4079.¶¶O-rings available from stock in standard AS-568A sizes.", "grpatr": "Nominal Size I.D. (in) [Nominal I.D.]|Nominal Size O.D. (in) [Nominal O.D.]|Nominal Thickness W (in) [Nominal CS (W)]|Actual Size I.D. (in)[Actual I.D. (in)]|Actual Size I.D. (mm)[Actual I.D. (mm)]|Actual Thickness W (in)[Actual CS (in)]|Actual Thickness W (mm)[Actual CS (mm)]", "grpflg": "Y" }, { "clsnam": "2607", "clsnbr": "01060108", "catnm1": "O-Rings", "catnm2": "Kalrez O-Rings", "catnm3": "Inch Size Kalrez O-Rings (AS 568)", "catnm4": "Kalrez Compound 7090", "catnm5": "", "imgnme": "LG_Orings_2.jpg|O-Ring_CrossSection-01.jpg", "notes": "Compound 7090 is a product for uses requiring higher hardness/higher modulus than more typical applications. Kalrez® 7090 perfluoroelastomer parts are well suited for both static and dynamic applications as well as specific sealing applications requiring extrusion resistance at high temperatures.¶¶O-rings available from stock in standard AS-568A sizes.", "grpatr": "Nominal Size I.D. (in) [Nominal I.D.]|Nominal Size O.D. (in) [Nominal O.D.]|Nominal Thickness W (in) [Nominal CS (W)]|Actual Size I.D. (in)[Actual I.D. (in)]|Actual Size I.D. (mm)[Actual I.D. (mm)]|Actual Thickness W (in)[Actual CS (in)]|Actual Thickness W (mm)[Actual CS (mm)]", "grpflg": "Y" }, { "clsnam": "1091", "clsnbr": "0107", "catnm1": "O-Rings", "catnm2": "O-Ring Cord", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_O-Ring-Blue-Round_Cord_640x463.jpg", "notes": "O-Ring Cord is available in inch or metric cross sectional sizes and a wide range of materials.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1088", "clsnbr": "010701", "catnm1": "O-Rings", "catnm2": "O-Ring Cord", "catnm3": "O-Ring Cord - Inch", "catnm4": "", "catnm5": "", "imgnme": "LG_Orings_2.jpg", "notes": "O-Ring Cord in Inch cross sections, available in a range of materials including: Aflas, Buna(Nitrile)(NBR),HNBR Nitrile HSN (Highly Saturated Nitrile),Viton(FKM), Silicone, EPDM, Urethane, Urethane Clear, Neoprene, Neoprene/EPDM Sponge, Silicone Metal Detectable, and Teflon(PTFE).", "grpatr": "Actual Thickness W (in)|Actual Thickness W - Tolerance (in)|Material", "grpflg": "Y" }, { "clsnam": "1090", "clsnbr": "010702", "catnm1": "O-Rings", "catnm2": "O-Ring Cord", "catnm3": "O-Ring Cord - Metric", "catnm4": "", "catnm5": "", "imgnme": "LG_Orings_2.jpg", "notes": "O-Ring Cord in Inch cross sections, available in a range of materials including: Aflas, Buna(Nitrile)(NBR),HNBR Nitrile HSN (Highly Saturated Nitrile),Viton(FKM), Silicone, EPDM, Urethane, Urethane Clear, Neoprene, Neoprene/EPDM Sponge, Silicone Metal Detectable, and Teflon(PTFE).", "grpatr": "Actual Thickness W(mm)|Actual Thickness W - Tolerance|Material", "grpflg": "Y" }, { "clsnam": "1856", "clsnbr": "0108", "catnm1": "O-Rings", "catnm2": "O-Ring Pack Program", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "dmr-o-ring-pack-program-buna.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003EDaemar\u0027s O-ring Pack Program provides AS-568 size o-rings packaged in quantities ranging from 5, 10 or 20 rings per pack. Sizes, quantity and a bar code are all printed on the poly bag.\u003C/SPAN\u003E\u003CBR\u003E\u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1857", "clsnbr": "010801", "catnm1": "O-Rings", "catnm2": "O-Ring Pack Program", "catnm3": "Buna O-Ring Packs", "catnm4": "", "catnm5": "", "imgnme": "LG_Orings_2.jpg|dmr-o-ring-pack-program-buna.jpg|O-Ring_CrossSection-01.jpg", "notes": "\u003CSPAN class=text1\u003EO-ring Packs AS-568 size Buna o-rings packaged in quantities ranging from 5, 10 or 20 rings per pack. Sizes, quantity and a bar code are all printed on the poly bag.\u003C/SPAN\u003E\u003CBR\u003E", "grpatr": "Pack Qty|ID (in)|Tol (in)|W (in)|Tol. (in)", "grpflg": "Y" }, { "clsnam": "2196", "clsnbr": "0109", "catnm1": "O-Rings", "catnm2": "PTFE Encapsulated O-Rings", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_ORing_Teflon_encapsulated.jpg|O-Ring_CrossSection-01.jpg", "notes": "PTFE Encapsulated o-rings are o-rings consisting of a seamless and uniform PTFE FEP/PFA encapsulation/jacket which completely encloses a core material (Viton® fluoroelastomer, Silicone, Buna, or EPDM). The combination of these components creates an o-ring that is virtually chemically inert and compression set resistant for use in harsh sealing environments. Encapsulated o-rings will decrease downtime and hence increase profitability wherever corrosive fluids and gases cause premature seal failure.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1208", "clsnbr": "010901", "catnm1": "O-Rings", "catnm2": "PTFE Encapsulated O-Rings", "catnm3": "Inch Size PTFE Encapsulated Silicone O-Rings", "catnm4": "", "catnm5": "", "imgnme": "DMR_ORing_Teflon_encapsulated.jpg|O-Ring_CrossSection-01.jpg", "notes": "\u003CP\u003EPTFE Encapsulated Silicone o-rings are o-rings consisting of a seamless and uniform PTFE FEP/PFA encapsulation/jacket which completely encloses a core material Silicone (also available in viton/buna/epdm).\u003C/P\u003E¶\u003CP\u003EThe combination of these components creates an o-ring that is virtually chemically inert and compression set resistant for use in harsh sealing environments. Encapsulated o-rings will decrease downtime and hence increase profitability wherever corrosive fluids and gases cause premature seal failure.\u003C/P\u003E¶\u003CP\u003EDMR® encapsulated o-rings match the chemical and temperature resistance of solid PTFE o-rings, in addition PTFE encapsulated o-rings possess properties of the encapsulated elastomer.\u003C/P\u003E¶¶O-rings available from stock in standard AS-568A sizes.", "grpatr": "Nominal Size I.D. (in) [Nominal I.D.]|Nominal Size O.D. (in) [Nominal O.D.]|Nominal Thickness W (in) [Nominal CS (W)]|Actual Size I.D. (in)[Actual I.D. (in)]|Actual Size I.D. (mm)[Actual I.D. (mm)]|Actual Thickness W (in)[Actual CS (in)]|Actual Thickness W (mm)[Actual CS (mm)]", "grpflg": "Y" }, { "clsnam": "2198", "clsnbr": "010902", "catnm1": "O-Rings", "catnm2": "PTFE Encapsulated O-Rings", "catnm3": "Inch Size PTFE Encapsulated Viton O-Rings", "catnm4": "", "catnm5": "", "imgnme": "DMR_ORing_Teflon_encapsulated.jpg|O-Ring_CrossSection-01.jpg", "notes": "\u003CP\u003EPTFE Encapsulated Viton® o-rings are o-rings consisting of a seamless and uniform PTFE FEP/PFA encapsulation/jacket which completely encloses a core material Viton® fluoroelastomer (also available in silicone/buna/epdm).\u003C/P\u003E¶\u003CP\u003EThe combination of these components creates an o-ring that is virtually chemically inert and compression set resistant for use in harsh sealing environments. Encapsulated o-rings will decrease downtime and hence increase profitability wherever corrosive fluids and gases cause premature seal failure.\u003C/P\u003E¶\u003CP\u003EDMR® encapsulated o-rings match the chemical and temperature resistance of solid PTFE o-rings, in addition PTFE encapsulated o-rings possess properties of the encapsulated elastomer.\u003C/P\u003E¶¶O-rings available from stock in standard AS-568A sizes.", "grpatr": "Nominal Size I.D. (in) [Nominal I.D.]|Nominal Size O.D. (in) [Nominal O.D.]|Nominal Thickness W (in) [Nominal CS (W)]|Actual Size I.D. (in)[Actual I.D. (in)]|Actual Size I.D. (mm)[Actual I.D. (mm)]|Actual Thickness W (in)[Actual CS (in)]|Actual Thickness W (mm)[Actual CS (mm)]", "grpflg": "Y" }, { "clsnam": "1012", "clsnbr": "0110", "catnm1": "O-Rings", "catnm2": "Quad-Rings", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "dmr-o-rings-quad-rings-render-profile_300x300.jpg", "notes": "Providing excellent sealing characteristics in a broad range of applications, Quad-Ring® seal\u0027s are available in a full range of standard sizes, in Nitrile and Fluoroelastomer.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1224", "clsnbr": "011001", "catnm1": "O-Rings", "catnm2": "Quad-Rings", "catnm3": "Quad-Rings Seals", "catnm4": "", "catnm5": "", "imgnme": "dmr-o-rings-quad-rings-render-profile_300x300.jpg|Avoiding-Spiral-Twist.JPG|Quad-Ring-PartingLine_dim.jpg", "notes": "\u003Cb\u003EAvoiding Spiral Twist\u003C/b\u003E¶¶To minimize breakaway friction, an O-Ring groove must be wide enough to allow rolling or twisting of the seal. In the long stroke of a reciprocating seal application, this twisting action can strain and eventually tear the rubber, causing a failure mode known as spiral twist.¶¶¶To prevent spiral twist, the Quad-Ring® seal\u0027s four-lobed configuration is designed to withstand the distortion and extrusion often caused by high or pulsating pressure. To accommodate these forces, a Quad-Ring® seal uses a narrower groove than a comparable O-Ring seal.¶¶¶¶\u003Cb\u003ELonger Seal Life\u003C/b\u003E¶¶Because less squeeze means less friction with the four-lobe design, seals last longer. This means equipment in which the Quad-Ring® seal is installed will operate longer and require less¶maintenance.¶¶¶¶\u003Cb\u003ENo Parting Line On Sealing Surface\u003C/b\u003E¶¶Unlike O-Rings, where partitioning lines are on the sealing surface, Quad-Rings® seal\u0027s parting lines lie between the lobes,¶away from the sealing surface. This design eliminates the problems of leakage resulting from a parting line\u0027s irregular surface.", "grpatr": "Nominal Size I.D. (in)|Nominal Size O.D. (in)|Nominal Thickness W (in)|Actual Thickness W (in)", "grpflg": "Y" }, { "clsnam": "2032", "clsnbr": "0111", "catnm1": "O-Rings", "catnm2": "Silicone O-Rings", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_ORing_Silicone_Red.jpg|O-Ring_CrossSection-01.jpg", "notes": "\u003CP\u003EThis compound has excellent resistance to temperature extremes and excellent dry heat resistance \u003C/P\u003E\u003Cul\u003E\u003Cli\u003EStandard Inch Silicone O-Rings sizes ranging from 1/32\u0022 I.D. to 26\u0022 I.D.\u003C/li\u003E\u003CP\u003E\u003Cli\u003ETrade Names: Silastic, Thermoflex\u003C/li\u003E\u003C/P\u003E\u003CP\u003E\u003Cli\u003EColour: Red\u003C/P\u003E\u003C/li\u003E\u003C/ul\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "2033", "clsnbr": "011101", "catnm1": "O-Rings", "catnm2": "Silicone O-Rings", "catnm3": "Inch Size Silicone O-Rings", "catnm4": "", "catnm5": "", "imgnme": "DMR_ORing_Silicone_Red.jpg|O-Ring_CrossSection-01.jpg", "notes": "\u003CP\u003EThis compound has excellent resistance to temperature extremes and excellent dry heat resistance. It has good resistance to sunlight, ozone, weathering, and has moderate oil resistance. Silicone is not recommended for exposure to petroleum fluids, and ketones. It is also not recommended where physical strength or abrasion resistance is required, since it has poor tensile and tear strength.\u003C/P\u003E¶¶O-rings available from stock in standard AS-568A sizes.", "grpatr": "Nominal Size I.D. (in) [Nominal I.D.]|Nominal Size O.D. (in) [Nominal O.D.]|Nominal Thickness W (in) [Nominal CS (W)]|Actual Size I.D. (in)[Actual I.D. (in)]|Actual Size I.D. (mm)[Actual I.D. (mm)]|Actual Thickness W (in)[Actual CS (in)]|Actual Thickness W (mm)[Actual CS (mm)]", "grpflg": "Y" }, { "clsnam": "2197", "clsnbr": "0112", "catnm1": "O-Rings", "catnm2": "Teflon O-Rings", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_ORing_Teflon_White.jpg|O-Ring_CrossSection-01.jpg", "notes": "\u003CP\u003ETeflon O-Rings are produced with 100% Virgin PTFE and fabricated to extremely close tolerances and to the highest industry and military specifications. Teflon O-Rings are impervious to harsh chemicals, acids and gases. Teflon O-Rings are an ideal solution for sealing applications where there are high temperatures and corrosive liquids or gases involved.\u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "2199", "clsnbr": "011201", "catnm1": "O-Rings", "catnm2": "Teflon O-Rings", "catnm3": "Inch Size Teflon O-Rings (PTFE)", "catnm4": "", "catnm5": "", "imgnme": "DMR_ORing_Teflon_White.jpg|O-Ring_CrossSection-01.jpg", "notes": "\u003CP\u003ETeflon O-Rings are produced with 100% Virgin PTFE and fabricated to extremely close tolerances and to the highest industry and military specifications.\u003C/P\u003E¶\u003CP\u003ETeflon O-Rings are impervious to harsh chemicals, acids and gases. Teflon O-Rings are an ideal solution for sealing applications where there are high temperatures and corrosive liquids or gases involved.\u003C/P\u003E¶¶O-rings available from stock in standard AS-568A sizes.", "grpatr": "Nominal Size I.D. (in) [Nominal I.D.]|Nominal Size O.D. (in) [Nominal O.D.]|Nominal Thickness W (in) [Nominal CS (W)]|Actual Size I.D. (in)[Actual I.D. (in)]|Actual Size I.D. (mm)[Actual I.D. (mm)]|Actual Thickness W (in)[Actual CS (in)]|Actual Thickness W (mm)[Actual CS (mm)]", "grpflg": "Y" }, { "clsnam": "2027", "clsnbr": "0113", "catnm1": "O-Rings", "catnm2": "Viton O-Rings (Fluorocarbon (FKM,FMC))", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_ORing_Viton_Brown.jpg|O-Ring_CrossSection-01.jpg", "notes": "\u003CP\u003EThis compound has a excellent resistance to a wide range of chemicals, excellent high temperature stability, excellent resistance to petroleum products, good resistance to weathering, ozone, oxygen, high temperature and flame.\u003C/P\u003E\u003CUL\u003E\u003CLI\u003EStandard Inch Viton O-Rings sizes ranging from 1/32\u0022 I.D. to 26\u0022 I.D.\u003C/LI\u003E\u003C/UL\u003E\u003CP\u003ETrade Names: Viton, Fluorel \u003C/P\u003E\u003CP\u003EColour : Brown \u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "2029", "clsnbr": "011301", "catnm1": "O-Rings", "catnm2": "Viton O-Rings (Fluorocarbon (FKM,FMC))", "catnm3": "Inch Size Viton O-Rings (AS 568-FKM)", "catnm4": "", "catnm5": "", "imgnme": "DMR_ORing_Viton_Brown.jpg|O-Ring_CrossSection-01.jpg", "notes": "\u003CP\u003EThis compound has a excellent resistance to a wide range of chemicals, excellent high temperature stability, excellent resistance to petroleum products, good resistance to weathering, ozone, oxygen, high temperature and flame, low compression set, low gas permeability, and is good for hard vacuum service. Fluorocarbon is not recommended for exposure to ketones, esters, anhydrous ammonia, and fire resistant fluids such as Skydrol, hot hydrofluoric, chlorosulonic acid, hot water/steam, and or brake fluid. \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003EStandard Inch Viton O-Rings sizes ranging from 1/32\u0022 I.D. to 26\u0022 I.D.\u003C/LI\u003E¶\u003CLI\u003ETrade Names: Viton, Fluorel\u003C/LI\u003E¶\u003CLI\u003ETemperature range: -31 ºF to 437 ºF\u003C/LI\u003E\u003CLI\u003EColour : Brown \u003C/LI\u003E¶\u003CLI\u003EHardness Range: 60-95 Shore A\u003C/LI\u003E\u003C/UL\u003E¶¶O-rings available from stock in standard AS-568A sizes.", "grpatr": "Nominal Size I.D. (in) [Nominal I.D.]|Nominal Size O.D. (in) [Nominal O.D.]|Nominal Thickness W (in) [Nominal CS (W)]|Actual Size I.D. (in)[Actual I.D. (in)]|Actual Size I.D. (mm)[Actual I.D. (mm)]|Actual Thickness W (in)[Actual CS (in)]|Actual Thickness W (mm)[Actual CS (mm)]", "grpflg": "Y" }, { "clsnam": "1002", "clsnbr": "02", "catnm1": "Shaft Seals", "catnm2": "", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "Shaft_oil_seals.jpg", "notes": "Rotary shaft seals play a key role in extending the operating life of bearing systems and reducing the overall costs of maintaining these systems. The primary function of a rotary shaft seal is to retain bearing system lubricants therefore allowing the bearings to operate in optimal levels of lubrication.\u003Cbr\u003E\u003Cbr\u003EThe secondary function of a rotary shaft seal is to exclude contaminants from the system, contaminants that can both damage bearings and break down the effectiveness of lubricants.This catalogue provides a listing of Daemar\u0027s standard rotary shaft seal styles and sizes. Accommodating shafts ranging from 1/4\u0022 to 40\u0022. The design guide offers assistance in selecting the appropriate style and material of seal for your particular operating environment. If heat or chemical attack are a concern we offer Viton®, and polyurethane materials as well as the standard silicones and nitriles. Additionally, design parameters for shaft and bore configurations are provided.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1025", "clsnbr": "0201", "catnm1": "Shaft Seals", "catnm2": "Oil Seals", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "lg_oil_seals2.jpg", "notes": "A complete selection of Inch \u0026 Metric sizes of DMR Rotary shaft seals. Available in a range of compounds and a wide selection of oil seal lip styles.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1026", "clsnbr": "020101", "catnm1": "Shaft Seals", "catnm2": "Oil Seals", "catnm3": "Oil Seals Inch Series", "catnm4": "", "catnm5": "", "imgnme": "dmr_type_dl.jpg", "notes": "Rotary shaft seals play a key role in extending the operating life of bearing systems and reducing the overall costs of maintaining these systems. The primary function of a rotary shaft seal is to retain bearing system lubricants therefore allowing the bearings to operate in optimal levels of lubrication. ¶The secondary function of a rotary shaft seal is to exclude contaminants from the system, contaminants that can both damage bearings and break down the effectiveness of lubricants.This catalogue provides a listing of Daemar\u0027s standard rotary shaft seal styles and sizes. Accommodating shafts ranging from 1/4\u0022 to 40\u0022. The design guide offers assistance in selecting the appropriate style and material of seal for your particular operating environment. If heat or chemical attack are a concern we offer Viton®, and polyurethane materials as well as the standard silicones and nitriles. Additionally, design parameters for shaft and bore configurations are provided.", "grpatr": "I.D. (in)|O.D. (in)|Seal Width - W (in)|Profile|Material", "grpflg": "Y" }, { "clsnam": "1125", "clsnbr": "020102", "catnm1": "Shaft Seals", "catnm2": "Oil Seals", "catnm3": "Oil Seals Metric Series - Standard", "catnm4": "", "catnm5": "", "imgnme": "dmr_type_a.jpg", "notes": "The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. There will be no fretting corrosion. Furthermore, damage of the housing bore will be prevented when frequently replacing the seal. This qualifies for sealing gaseous or liquid media. Available in single and double lip profiles.", "grpatr": "I.D. (mm)|O.D. (mm)|Seal Width - W (mm)|Profile|Material", "grpflg": "Y" }, { "clsnam": "1094", "clsnbr": "0202", "catnm1": "Shaft Seals", "catnm2": "Axle Seals", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_AxleSeal_400x400.jpg", "notes": "DMR® Axle Seals are a unitized, one-piece design, used in environments where outside contamination can damage the sealing lip. The seal design features a spring loaded sealing lip running against the inner wall of the metal casing, with dirt exclusion provided by two wiper lips.¶The seal configuration incorporates metal on metal contact around the OD to prevent leaks between the seal and the hub. Metal on metal contact also occurs between the seal and the shaft. This ensures that the seal is stationary with respect to the shaft, thus protecting the shaft from wear.", "grpatr": "I.D. (in)|O.D. (in)|Seal Width - W (in)|Profile|Material", "grpflg": "Y" }, { "clsnam": "1229", "clsnbr": "0203", "catnm1": "Shaft Seals", "catnm2": "DMR Bearing Isolators", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "lg_dmr_bearing-isolator-01.jpg", "notes": "Bearing isolators (Protech seals) are designed to protect bearings with zero lubricant leakage and total exclusion of contaminants.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1227", "clsnbr": "020301", "catnm1": "Shaft Seals", "catnm2": "DMR Bearing Isolators", "catnm3": "DMR Bearing Isolators - Inch Sizes", "catnm4": "", "catnm5": "", "imgnme": "lg_dmr_bearing-isolator-01.jpg", "notes": "The DMR bearing isolator is based on a simple, unitized, two-piece design normally manufactured in chemically resistant PTFE. The product range consists of a complete family of complementary designs that provides outstanding performance for virtually any application. Applications with pressurized, flooded, or sealed bearing housings can now benefit from Types FS and FN, which feature an internal lip seal, again offering benefits of zero leakage and zero entry of contaminants.¶¶High-grade PTFE composites in the construction of the standard bearing isolator range ensure a wide range of operating capabilities, including high and low temperature and extreme chemical environments. The use of alternative PTFE fillers extends the physical properties and capabilities into such areas as food production and pharmaceuticals.¶¶DMR bearing isolators can normally replace existing sealing devices, without modification to the equipment. Extending equipment operating life across these industries:¶\u003Cul\u003E\u003Cli\u003EChemical Processing\u003C/li\u003E¶\u003Cli\u003EPulp and Paper\u003C/li\u003E¶\u003Cli\u003EOil and Gas\u003C/li\u003E¶\u003Cli\u003EMining\u003C/li\u003E¶\u003Cli\u003EFood and Beverage\u003C/li\u003E\u003C/ul\u003E", "grpatr": "Shaft Diameter (in)|Bore Diameter (in)|Total Seal Width (in)|Seal Material|O-Ring Material", "grpflg": "Y" }, { "clsnam": "1228", "clsnbr": "020302", "catnm1": "Shaft Seals", "catnm2": "DMR Bearing Isolators", "catnm3": "DMR Bearing Isolators - Metric Sizes", "catnm4": "", "catnm5": "", "imgnme": "lg_dmr_bearing-isolator-01.jpg", "notes": "The DMR bearing isolator is based on a simple, unitized, two-piece design normally manufactured in chemically resistant PTFE. The product range consists of a complete family of complementary designs that provides outstanding performance for virtually any application. Applications with pressurized, flooded, or sealed bearing housings can now benefit from Types FS and FN, which feature an internal lip seal, again offering benefits of zero leakage and zero entry of contaminants.¶¶High-grade PTFE composites in the construction of the standard bearing isolator range ensure a wide range of operating capabilities, including high and low temperature and extreme chemical environments. The use of alternative PTFE fillers extends the physical properties and capabilities into such areas as food production and pharmaceuticals.¶¶¶DMR bearing isolators can normally replace existing sealing devices, without modification to the equipment. Extending equipment operating life across these industries:¶\u003Cul\u003E\u003Cli\u003EChemical Processing\u003C/li\u003E¶\u003Cli\u003EPulp and Paper\u003C/li\u003E¶\u003Cli\u003EOil and Gas\u003C/li\u003E¶\u003Cli\u003EMining\u003C/li\u003E¶\u003Cli\u003EFood and Beverage\u003C/li\u003E\u003C/ul\u003E", "grpatr": "Shaft Diameter (mm)|Bore Diameter (mm)|Total Seal Width (mm)|Seal Material|O-Ring Material", "grpflg": "Y" }, { "clsnam": "1230", "clsnbr": "0204", "catnm1": "Shaft Seals", "catnm2": "End Caps", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_EndCover.jpg", "notes": "DMR® End Covers (end caps) are designed applications where the shaft does not pass through the housing wall of the bore, DMR VK covers provide protection for the bearings. The covers were developed to fit into housing bores for rotary shaft seals and they have the same tolerances as those for the O.D. of a seal. The inner housing is carbon steel and the outer seal is nitrile rubber.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1231", "clsnbr": "020401", "catnm1": "Shaft Seals", "catnm2": "End Caps", "catnm3": "End Caps - Metric Sizes", "catnm4": "", "catnm5": "", "imgnme": "DMR_EndCover.jpg|DMR-EndCaps_Type_VK_Dimensions_02.jpg", "notes": "DMR® End Covers (end caps) are designed applications where the shaft does not pass through the housing wall of the bore, DMR VK covers provide protection for the bearings. The covers were developed to fit into housing bores for rotary shaft seals and they have the same tolerances as those for the O.D. of a seal. The inner housing is carbon steel and the outer seal is nitrile rubber.", "grpatr": "Type|Diameter (mm)|Height (mm)|Material", "grpflg": "Y" }, { "clsnam": "1106", "clsnbr": "0205", "catnm1": "Shaft Seals", "catnm2": "JM Clipper Seals", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_JM-Clipper-RUP_400x400.jpg", "notes": "A complete selection if JM Clipper shaft seals in inch and metric shaft sizes. JM Clipper seal sizes ranging from below one inch to well over 40 inches OD.¶¶JM Clipper and Daemar® Inc. offer one of the largest selections of flexible Oil Seals available.¶¶Made from a Kevlar reinforced heel, this seal can be used as a solid or a split seal. With inch and metric shaft sizes we can provide from stock a seal for almost any size ranging from below one inch to well over 40 inches OD. Nitrile, Viton materials are available and many lip designs for your specific sealing environments.", "grpatr": "Mould|I.D. (in)|O.D. (in)|Seal Width - W (in)|Material[Lip Material]|Material Code case/Lip (in)[Material Code]|Design[Seal Type]", "grpflg": "Y" }, { "clsnam": "1151", "clsnbr": "0206", "catnm1": "Shaft Seals", "catnm2": "L2M Seals", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_L2M_300x300.jpg", "notes": "L2M is a rolling mill bearing seal. Every design feature was based on the extra demands of rolling mill service - including the demand for lower cost. Even though the term \u0022rolling mill\u0022 is usually associated with the aluminum and steel industry, with this seal, we include the paper industry.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1149", "clsnbr": "0207", "catnm1": "Shaft Seals", "catnm2": "Teflon Energized Seals", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_PTFESeal_CrossSection_784x784.jpg", "notes": "Used in applications where ultra-low friction, chemical compatibility, long life and extreme temperature performance is required.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1030", "clsnbr": "0208", "catnm1": "Shaft Seals", "catnm2": "V-Rings", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "lg_va_series.jpg", "notes": "V-Rings are all-rubber seals that seat directly on the shaft and seal axially against a counterface, housing, seal case or similar surface.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1109", "clsnbr": "020801", "catnm1": "Shaft Seals", "catnm2": "V-Rings", "catnm3": "VA-Rings", "catnm4": "", "catnm5": "", "imgnme": "dmr_va_profile.jpg|v_rings_dim.jpg", "notes": "Rubber ring for shaft requiring a dynamic seal (primary or back-up) in the axial direction. The body of V seals rotate with the shaft and holds itself in position by its elastic fit on the shaft. Sealing is produced by the contact between the lip and the counter face. Additionally, the V Series seal has good sealing action when the shaft is eccentric and/or there is some misalignment. Combined with radial shaft seals, these axial face seal designs provide excellent excluding characteristics against all types of liquids, greases, oils, dirt, sand and other foreign materials.¶\u003CBR\u003E\u003CBR\u003EVA - standard style, VA seal has a straight back for shaft from 3 to 2000 mm\u003C/BR\u003E", "grpatr": "Shaft Diameter - d1 (mm)|Shaft Diameter - d1 (in)|I.D. - d (mm)|I.D. - d (in)|Height - c (mm)|Height - c (in)|Dimension - A (mm)|Dimension - A (in)|Free Width - B (mm)|Free Width - B (in)", "grpflg": "Y" }, { "clsnam": "2604", "clsnbr": "020802", "catnm1": "Shaft Seals", "catnm2": "V-Rings", "catnm3": "VE Rings", "catnm4": "", "catnm5": "", "imgnme": "DMR_VE_crop.jpg|v_rings_dim.jpg", "notes": "\u003Cp\u003EHeavy duty design for large diameter applications (longer lip can accommodate greater shaft misalignment).\u003C/p\u003E¶\u003Cp\u003ETypical applications: Commonly used in rolling mills as a dirt/water excluder seal.\u003C/p\u003E¶\u003Cp\u003ECompetitors types: VR4\u003Cbr /\u003E\u003Cbr /\u003EVE Rings\u003C/p\u003E", "grpatr": "Shaft Diameter - d1 (mm)|Shaft Diameter - d1 (in)|I.D. - d (mm)|I.D. - d (in)|Height - c (mm)|Height - c (in)|Dimension - A (mm)|Dimension - A (in)|Free Width - B (mm)|Free Width - B (in)", "grpflg": "Y" }, { "clsnam": "1111", "clsnbr": "020803", "catnm1": "Shaft Seals", "catnm2": "V-Rings", "catnm3": "VL-Rings", "catnm4": "", "catnm5": "", "imgnme": "dmr_vl_profile.jpg|vl_rings_dim.jpg", "notes": "Rubber ring for shaft requiring a dynamic seal (primary or back-up) in the axial direction. The body of V seals rotate with the shaft and holds itself in position by its elastic fit on the shaft. Sealing is produced by the contact between the lip and the counter face. Additionally, the V Series seal has good sealing action when the shaft is eccentric and/or there is some misalignment. Combined with radial shaft seals, these axial face seal designs provide excellent excluding characteristics against all types of liquids, greases, oils, dirt, sand and other foreign materials.¶\u003CBR\u003E\u003CBR\u003EVL - narrow cross-section where space is limited\u003C/BR\u003E", "grpatr": "Shaft Diameter - d1 (mm)|Shaft Diameter - d1 (in)|I.D. - d (mm)|I.D. - d (in)|Height - c (mm)|Height - c (in)|Dimension - A (mm)|Dimension - A (in)|Free Width - B (mm)|Free Width - B (in)", "grpflg": "Y" }, { "clsnam": "1110", "clsnbr": "020804", "catnm1": "Shaft Seals", "catnm2": "V-Rings", "catnm3": "VS-Rings", "catnm4": "", "catnm5": "", "imgnme": "dmr_vs_profile.jpg|vs_rings_dim.jpg", "notes": "Rubber ring for shaft requiring a dynamic seal (primary or back-up) in the axial direction. The body of V seals rotate with the shaft and holds itself in position by its elastic fit on the shaft. Sealing is produced by the contact between the lip and the counter face. Additionally, the V Series seal has good sealing action when the shaft is eccentric and/or there is some misalignment. Combined with radial shaft seals, these axial face seal designs provide excellent excluding characteristics against all types of liquids, greases, oils, dirt, sand and other foreign materials.¶\u003CBR\u003E\u003CBR\u003EVS - wide body (angled back) for higher speed applications\u003C/BR\u003E", "grpatr": "Shaft Diameter - d1 (mm)|Shaft Diameter - d1 (in)|I.D. - d (mm)|I.D. - d (in)|Height - c (mm)|Height - c (in)|Dimension - A (mm)|Dimension - A (in)|Free Width - B (mm)|Free Width - B (in)", "grpflg": "Y" }, { "clsnam": "1107", "clsnbr": "0209", "catnm1": "Shaft Seals", "catnm2": "Wheel Hub Seals", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "lg_dmr_wheelhubseals_group_03.jpg", "notes": "DMR® Wheel Hub Seals protect bearings and shafts during operation, installation and removal by providing a built-in wear sleeve and rubber coated metal casings.", "grpatr": "Industrial PN|National PN|SKF-CR PN|I.D. (in)|O.D. (in)|Width (in)", "grpflg": "Y" }, { "clsnam": "1204", "clsnbr": "03", "catnm1": "Cords Canada Products", "catnm2": "", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "Cords-Category-Group_525x525.jpg", "notes": "Our Cords Canada line up of products features Heyco molded wire protection components including Strain Relief Bushings, Liquid Tight Cordgrips, Grommets, Wire Management Components. Nylon Fasteners including screws, nuts, bolts, threaded rod and clips.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1803", "clsnbr": "0301", "catnm1": "Cords Canada Products", "catnm2": "Balls", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "Cords_Balls_Solid_Group-3_600x600.jpg", "notes": "A selection of both Solid and Hollow Balls in PP, HDPE, LDPE, Nylon, and Acrylic.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1218", "clsnbr": "030101", "catnm1": "Cords Canada Products", "catnm2": "Balls", "catnm3": "Energy Saving Hollow Balls", "catnm4": "", "catnm5": "", "imgnme": "Cords_Balls_Solid_LDPE_Coloured_600x600.jpg", "notes": "Hollow ball blankets are successfully used in many applications: anodizing, food processing, metal processing and finishing, sewage treatment, gas scrubbing, temperature retardation and more. Material is Polypropylene.", "grpatr": "Type|Diameter (in)|Diameter (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "1395", "clsnbr": "030102", "catnm1": "Cords Canada Products", "catnm2": "Balls", "catnm3": "Precision Ground Solid Balls", "catnm4": "", "catnm5": "", "imgnme": "Cords_Balls_Solid_Group-3_600x600.jpg", "notes": "Precision Ground Solid Balls in a range of materials including PP, HDPE, LDPE, Nylon, and Acrylic.", "grpatr": "Type|Diameter (in)|Diameter (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "1804", "clsnbr": "0302", "catnm1": "Cords Canada Products", "catnm2": "Bushings and Grommets", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_Heyco_Group_Bushing-01_600x600.jpg", "notes": "Bushings convert raw-edged holes to smooth, neat, insulated ones. Grommets protect tubes, wires and cables from becoming frayed or cut by sharp panel edges. ¶¶\u003Cul\u003E\u003Cli\u003ESnap Bushings\u003C/li\u003E¶\u003Cli\u003EShorty Bushings\u003C/li\u003E¶\u003Cli\u003EUniversal Bushings\u003C/li\u003E¶\u003Cli\u003EAmour Bushings\u003C/li\u003E ¶\u003Cli\u003EGrommets\u003C/li\u003E\u003C/ul\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1575", "clsnbr": "030201", "catnm1": "Cords Canada Products", "catnm2": "Bushings and Grommets", "catnm3": "Armour (Anti-Short) Bushings", "catnm4": "", "catnm5": "", "imgnme": "DMR_Heyco_Armour_Bushing_600x600.jpg|Armour_Bushing_Dimensions-02-700x600.jpg", "notes": "Used at entrance to flexible metallic conduit or armoured cable. Insulates and protects electrical¶wires from being cut by rough conduit ends. Chamfered lead-in allows for fast installation. Also used in holes through which ropes and steel cables pass, to prevent chafing, cutting or scraping, where bushing space is very limited. Suitable for installation at temperatures as low as -40°F.¶¶Standard colour: Red", "grpatr": "Fits These Armoured Cables|Fits Cable ID (in)|Fits Cable ID (mm)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)", "grpflg": "Y" }, { "clsnam": "1299", "clsnbr": "030202", "catnm1": "Cords Canada Products", "catnm2": "Bushings and Grommets", "catnm3": "Bushing Assortment Labkit", "catnm4": "", "catnm5": "", "imgnme": "Labkit-2_BushingAssortmentKit_700x650.jpg", "notes": "Our labkits are perfect for product design departments, experimental labs and for all¶prototype work.¶LABKIT 2 is an assortment of bushings with approximately the following quantities and¶part numbers. (Content may vary.) 18 sizes and 255 pieces¶25 each SB250-2, B312-250, SB375-4, OCB375, SB437-5¶20 each SBT500-6, UBT500¶15 each OCB500, UB625¶10 each OCUB625, B875-750, SUB875¶8 each OCUB750, UB875¶4 each SBT1093-15, SB1000-12, SB1375-16¶2 each SB1750-22", "grpatr": "Size - Quantity", "grpflg": "Y" }, { "clsnam": "1403", "clsnbr": "030203", "catnm1": "Cords Canada Products", "catnm2": "Bushings and Grommets", "catnm3": "Grommeting", "catnm4": "", "catnm5": "", "imgnme": "Grommeting_image-02_700x700.jpg|Grommeting_Dimensions-02_700x600.jpg|Grommeting_image-01_600x700.jpg|Grommeting_Dimensions-01_750x600.jpg", "notes": "Extruded Serrated Polyethylene (GRPE) Use grommeting to protect tubes, wires and cables from becoming frayed or cut by sharp panel edges. Makes bushings for all sizes and shapes of panel cutouts in sheet metal, glass, wood panels or other sheet-form materials. No tools required-just cut to size and insert. Depending on the panel thickness, grommeting may grip tightly by itself, or it may need a touch of epoxy to keep it in place.¶¶Extruded Unserrated Polyethylene (GRUPE)¶¶Standard colour: Natural.¶¶¶Continuous Serrated Nylon (GR)¶¶Standard colour: Black or natural white. Specify colour when ordering.", "grpatr": "H (in)|H (mm)|W (in)|W (mm)|T (in)|T (mm)|Max. Chassis Thickness (in)|Max. Chassis Thickness (mm)", "grpflg": "Y" }, { "clsnam": "1807", "clsnbr": "030204", "catnm1": "Cords Canada Products", "catnm2": "Bushings and Grommets", "catnm3": "Open / Closed Bushings", "catnm4": "", "catnm5": "", "imgnme": "DMR_Heyco_Open-Closed_Bushing_700x600.jpg|Open-Close_Bushing_Dimensions-750x600.jpg", "notes": "A black nylon bushing for side entry and encirclement of preassembled harnesses, capillary tubes or other units that have sections larger than the bushing\u0027s ID. Can also be assembled into holes that already contain cable or tubing. Fingertip pressure snaps the bushing into the mounting hole, forming a complete circle and insulation barrier against the raw edge of the chassis hole.¶¶Standard colour: Black. White and other colours available at premium charge if quantities are sufficient.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Max. Chassis Thickness (in)|Max. Chassis Thickness (mm)|Mounting Hole Diameter (in)|Mounting Hole Diameter (mm)", "grpflg": "Y" }, { "clsnam": "OCUNBUSH2821", "clsnbr": "030205", "catnm1": "Cords Canada Products", "catnm2": "Bushings and Grommets", "catnm3": "Open / Closed Universal Bushings", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_OpenClose_Universal_Bushing_600x600.jpg|CordsCanada_OpenClosed_UB_Dim_700x500.jpg", "notes": "These nylon bushings absorb vibration, cushion and insulate cables, tubing, hoses or shafts. They feature flexible shutters which adjust to accommodate and support any shape. Easily locked into mounting hole with simple fingertip pressure. Can also be assembled into holes that already contain cable or tubing.¶¶Standard colour: Black. White and other colours available at extra charge if quantities are sufficient.", "grpatr": "A Head Diameter (in)|A Head Diameter (mm)|B Overall Height (in)|B Overall Height (mm)|Max. Chassis Thickness (in)|Max. Chassis Thickness (mm)|Mounting Hole Diameter (in)|Mounting Hole Diameter (mm)|Maximum Inside Diameter (in)|Maximum Inside Diameter (mm)", "grpflg": "Y" }, { "clsnam": "1467", "clsnbr": "030206", "catnm1": "Cords Canada Products", "catnm2": "Bushings and Grommets", "catnm3": "Shorty Bushings", "catnm4": "", "catnm5": "", "imgnme": "DMR_Heyco_ShortyBushing_700x600.jpg|Shorty_Bushing_Dimensions-750x600.jpg", "notes": "All the same features as the standard snap bushings but can accommodate a smaller chassis thickness. Locking fingers securely snap into holes with fingertip pressure.¶Ask about our Labkit 2 containing an assortment of shorty and snap bushings for R \u0026 D purposes.¶¶Standard colour: Black.¶White and other colours available at premium charge if quantities are sufficient.¶*UL and CSA approval pending.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Maximum Thickness (in)|Maximum Thickness (mm)|Mounting Hole Diameter (in)|Mounting Hole Diameter (mm)", "grpflg": "Y" }, { "clsnam": "1907", "clsnbr": "030207", "catnm1": "Cords Canada Products", "catnm2": "Bushings and Grommets", "catnm3": "Shorty Universal Bushing", "catnm4": "", "catnm5": "", "imgnme": "DMR_Heyco_Universal-Shorty_Bushing-01_600x600.jpg|Universal_Bushing_Dimensions-750x600.jpg", "notes": "These nylon bushings absorb vibration, cushion and insulate cables, tubing, hoses or shafts. They feature flexible shutters which adjust to accommodate and support any shape. Easily locked into mounting hole with simple fingertip pressure.¶The Shorty Universal Bushing (SUB) is ideal for a thinner chassis thickness.¶¶Standard colour: Black. White and other colours available at extra charge if quantities are sufficient.", "grpatr": "A Head Diameter (in)|A Head Diameter (mm)|B Overall Height (in)|B Overall Height (mm)|Max. Chassis Thickness (in)|Max. Chassis Thickness (mm)|Mounting Hole Diameter (in)|Mounting Hole Diameter (mm)|Maximum Inside Diameter (in)|Maximum Inside Diameter (mm)", "grpflg": "Y" }, { "clsnam": "1571", "clsnbr": "030208", "catnm1": "Cords Canada Products", "catnm2": "Bushings and Grommets", "catnm3": "Snap Bushings", "catnm4": "", "catnm5": "", "imgnme": "DMR_Heyco_Snap_Bushing-01_700x500.jpg|Snap_Bushing_Dimensions-750x600.jpg", "notes": "These nylon bushings convert raw-edged holes to smooth, neat, insulated ones. Special locking \u0022fingers\u0022 allow the bushings to snap into holes with fingertip pressure. Mechanically protect,¶insulate, and isolate telecommunications and electrical cables, tubing, hose, rope and utility lines.¶¶SB312-3, SB375-4 and SB437-4 are also available as brasscoloured parts for lamp and lighting applications.¶¶Standard colour: Black. White and other colours available at premium charge if quantities are sufficient.¶*Depicts single chassis design.¶¶¶¶¶\u003Ca href=\u0022https://cordscanada.wpengine.com/wp-content/uploads/2023/05/CordsCanada_Snap-Bushings.pdf\u0022 target=\u0022_blank\u0022\u003ESnap Bushing Technical Sheet pdf\u003C/a\u003E¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Max. Chassis Thickness (in)|Max. Chassis Thickness (mm)|Mounting Hole Diameter (in)|Mounting Hole Diameter (mm)", "grpflg": "Y" }, { "clsnam": "1460", "clsnbr": "030209", "catnm1": "Cords Canada Products", "catnm2": "Bushings and Grommets", "catnm3": "Snap Bushings for Thicker Panels", "catnm4": "", "catnm5": "", "imgnme": "DMR_Heyco_Snap_Bushing_Thicker_700x600.jpg|Snap_Bushing_Dimensions-750x600.jpg", "notes": "Has the same application as the snap bushings but can accommodate a thicker panel. Locking fingers snap into holes with fingertip pressure.¶Withstands a push-back force of 35 pounds.¶¶Standard colour: Black. White and other colours available at premium charge if quantities are sufficient.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Max. Chassis Thickness (in)|Max. Chassis Thickness (mm)|Mounting Hole Diameter (in)|Mounting Hole Diameter (mm)", "grpflg": "Y" }, { "clsnam": "1810", "clsnbr": "030210", "catnm1": "Cords Canada Products", "catnm2": "Bushings and Grommets", "catnm3": "Universal Bushings", "catnm4": "", "catnm5": "", "imgnme": "DMR_Heyco_Universal-Shorty_Bushing-01_600x600.jpg|Universal_Bushing_Dimensions-750x600.jpg", "notes": "These nylon bushings absorb vibration, cushion and insulate cables, tubing, hoses or shafts. They feature flexible shutters which adjust to accommodate and support any shape. Easily locked into mounting hole with simple fingertip pressure.¶The Shorty Universal Bushing (SUB) is ideal for a thinner chassis thickness.¶¶Standard colour: Black. White and other colours available at extra charge if quantities are sufficient.", "grpatr": "A Head Diameter (in)|A Head Diameter (mm)|B Overall Height (in)|B Overall Height (mm)|Max. Chassis Thickness (in)|Max. Chassis Thickness (mm)|Mounting Hole Diameter (in)|Mounting Hole Diameter (mm)|Maximum Inside Diameter (in)|Maximum Inside Diameter (mm)", "grpflg": "Y" }, { "clsnam": "1373", "clsnbr": "0303", "catnm1": "Cords Canada Products", "catnm2": "Caps, Plugs, Glides and Protectors", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_CapsPlugsGlidesProtectors_Group_1000x800.jpg", "notes": "A full selection of caps, plugs, glides and protectors for many types of applications. Available in a range of materials, styles and sizes.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1932", "clsnbr": "030301", "catnm1": "Cords Canada Products", "catnm2": "Caps, Plugs, Glides and Protectors", "catnm3": "Dome Plugs", "catnm4": "", "catnm5": "", "imgnme": "Cords_DomePlug_500x500.jpg|Cords_DomePlugs_Dimensions_500x350.jpg", "notes": "Close unneeded chassis holes. Moulded of black nylon, these feature a convex, matte finish head that tapers to a thin edge. Gives your product an uninterrupted, completed surface you can even paint over. No tools required. Just a quick push locks these firmly into chassis up to 1/4\u0022 thick.", "grpatr": "Mounting Hole Diameter (in)|Mounting Hole Diameter (mm)|Head Thickness - Fraction|Head Thickness (in)|Head Thickness (mm)|A Head Diameter (in)|A Head Diameter (mm)|B Overall Height (in)|B Overall Height (mm)|Maximum Chassis Thickness (in)|Maximum Chassis Thickness (mm)", "grpflg": "Y" }, { "clsnam": "PLGGLDASQ2677", "clsnbr": "030302", "catnm1": "Cords Canada Products", "catnm2": "Caps, Plugs, Glides and Protectors", "catnm3": "Plug Glides - Angled Square", "catnm4": "", "catnm5": "", "imgnme": "Cords_AngledSquarePlugGlide_500x500.jpg", "notes": "Plug glides are made of polyethylene. Also available in ABS by special request. As with most parts we offer, we can also have glides designed to your custom specifications.¶¶Standard Colour: Black.¶Also available: White.¶Other sizes and gauges available for all styles.¶Other styles also available.", "grpatr": "Size - Fraction|Size (in)|Size (mm)|Gauge", "grpflg": "Y" }, { "clsnam": "PLGGLDREC2676", "clsnbr": "030303", "catnm1": "Cords Canada Products", "catnm2": "Caps, Plugs, Glides and Protectors", "catnm3": "Plug Glides - Rectangular", "catnm4": "", "catnm5": "", "imgnme": "Cords_RectangularPlugGlides_500x500.jpg", "notes": "Plug glides are made of polyethylene. Also available in ABS by special request. As with most parts we offer, we can also have glides designed to your custom specifications.¶¶Standard Colour: Black.¶Also available: White.¶Other sizes and gauges available for all styles.¶Other styles also available.", "grpatr": "Size - Fraction|Size (in)|Size (mm)|Gauge", "grpflg": "Y" }, { "clsnam": "PLGGLDRND2674", "clsnbr": "030304", "catnm1": "Cords Canada Products", "catnm2": "Caps, Plugs, Glides and Protectors", "catnm3": "Plug Glides - Round", "catnm4": "", "catnm5": "", "imgnme": "Cords_RoundPlugGlides_600x600.jpg", "notes": "Plug glides are made of polyethylene. Also available in ABS by special request. As with most parts we offer, we can also have glides designed to your custom specifications.¶¶Standard Colour: Black.¶Also available: White.¶Other sizes and gauges available for all styles.¶Other styles also available.", "grpatr": "Size - Fraction|Size (in)|Size (mm)|Gauge", "grpflg": "Y" }, { "clsnam": "PLGGLDSQ2675", "clsnbr": "030305", "catnm1": "Cords Canada Products", "catnm2": "Caps, Plugs, Glides and Protectors", "catnm3": "Plug Glides - Square", "catnm4": "", "catnm5": "", "imgnme": "Cords_SquarePlugGlides_800x600.jpg", "notes": "Plug glides are made of polyethylene. Also available in ABS by special request. As with most parts we offer, we can also have glides designed to your custom specifications.¶¶Standard Colour: Black.¶Also available: White.¶Other sizes and gauges available for all styles.¶Other styles also available.", "grpatr": "Size - Fraction|Size (in)|Size (mm)|Gauge", "grpflg": "Y" }, { "clsnam": "SHORTPLUG2678", "clsnbr": "030306", "catnm1": "Cords Canada Products", "catnm2": "Caps, Plugs, Glides and Protectors", "catnm3": "Shorty Plugs", "catnm4": "", "catnm5": "", "imgnme": "Cords_ShortyPlug_500x500.jpg|Cords_ShortyPlug_Dimensions_450x350.jpg", "notes": "Use when space inside the panel is a problem. Shorty plugs have a limited (1/8\u0022) protrusion inside the panel. They have a matte finish head tapering to a thin edge for a smooth finished look. Quickly and easily installed.¶¶Standard colour: Black", "grpatr": "Mounting Hole Diameter (in)|Mounting Hole Diameter (mm)|Head Thickness (in)|Head Thickness (mm)|A Head Diameter (in)|A Head Diameter (mm)|B Overall Height (in)|B Overall Height (mm)|Maximum Chassis Thickness (in)|Maximum Chassis Thickness (mm)", "grpflg": "Y" }, { "clsnam": "SNAPNPLUG2679", "clsnbr": "030307", "catnm1": "Cords Canada Products", "catnm2": "Caps, Plugs, Glides and Protectors", "catnm3": "Snap-In Plugs", "catnm4": "", "catnm5": "", "imgnme": "Cords_SnapInPlugs_Type1-Flush_450x450.jpg|Cords_SnapInPlug_Type2-Recessed_450x450.jpg|Cords_SnapInPlug_Type1-Flush_Dims_450x450.jpg|Cords_SnapInPlug_Type2-Recessed_Dims_450x450.jpg", "notes": "Type 1: Flush front.¶Type 2: Recessed front.¶¶Snap-In Plugs are tough, flexible \u0022finishing\u0022 plugs used extensively in all sheet metal work to seal access holes. Insertion is a snap. Thanks to an internal bead, they hold on tight when the handling gets tough. Snap-In Plugs are used by auto rustproofers, on refrigeration units, water heaters, steel doors, paint cans, lawn mowers-even piggy banks! These can be hot stamped with your logo to provide a unique and attractive solution for product identification.", "grpatr": "Fits Hole Size - Fraction|A - Fraction|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|F (in)|F (mm)", "grpflg": "Y" }, { "clsnam": "UNPGBLHD2682", "clsnbr": "030308", "catnm1": "Cords Canada Products", "catnm2": "Caps, Plugs, Glides and Protectors", "catnm3": "Universal Plug Glides - Ball Head", "catnm4": "", "catnm5": "", "imgnme": "Cords_BallHeadPlugGlide_500x500.jpg", "notes": "Universal Plug Glides - Ball Head", "grpatr": "Tube OD - Fraction|Tube OD (in)|Tube OD (mm)|Colour", "grpflg": "Y" }, { "clsnam": "UNPGFLHD2680", "clsnbr": "030309", "catnm1": "Cords Canada Products", "catnm2": "Caps, Plugs, Glides and Protectors", "catnm3": "Universal Plug Glides - Flat Head", "catnm4": "", "catnm5": "", "imgnme": "Cords_FlatHeadUniversalPlugGlide_500x500.jpg", "notes": "Universal Plug Glides - FLAT HEAD - 14-23 gauge", "grpatr": "Tube OD - Fraction|Tube OD (in)|Tube OD (mm)|Colour", "grpflg": "Y" }, { "clsnam": "UNPGRCHD2683", "clsnbr": "030310", "catnm1": "Cords Canada Products", "catnm2": "Caps, Plugs, Glides and Protectors", "catnm3": "Universal Plug Glides - Rectangular", "catnm4": "", "catnm5": "", "imgnme": "Cords_RectangularUniversalPlugGlide_600x600.jpg", "notes": "Universal Plug Glides - Rectangular", "grpatr": "Tube OD - Fraction|Tube OD (in)|Tube OD (mm)|Colour", "grpflg": "Y" }, { "clsnam": "UNPGSQHD2681", "clsnbr": "030311", "catnm1": "Cords Canada Products", "catnm2": "Caps, Plugs, Glides and Protectors", "catnm3": "Universal Plug Glides - Square", "catnm4": "", "catnm5": "", "imgnme": "Cords_SquareUniversalPlugGlide_500x500.jpg", "notes": "Universal Plug Glides - Square", "grpatr": "Tube OD - Fraction|Tube OD (in)|Tube OD (mm)|Colour", "grpflg": "Y" }, { "clsnam": "VENTPLUG2684", "clsnbr": "030312", "catnm1": "Cords Canada Products", "catnm2": "Caps, Plugs, Glides and Protectors", "catnm3": "Vent Plugs", "catnm4": "", "catnm5": "", "imgnme": "Cords_VentPlug_500x500.jpg|Cords_VentPlug_Dimensions_500x400.jpg", "notes": "Permits the passage of air for heat dissipation and ventilation. Convex, matte finish head tapers to a thin edge. Locks firmly into chassis up to 1/4\u0022 thick. Quick and easy installation with only fingertip pressure.¶¶Standard colour: Black.", "grpatr": "Mounting Hole Diameter (in)|Mounting Hole Diameter (mm)|A Head Diameter (in)|A Head Diameter (mm)|B Overall Height (in)|B Overall Height (mm)|Maximum Chassis Thickness (in)|Maximum Chassis Thickness (mm)|No. of Holes", "grpflg": "Y" }, { "clsnam": "1808", "clsnbr": "0304", "catnm1": "Cords Canada Products", "catnm2": "Clamps and Clips", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "Cords_Clamps-Clips_Group_750x600.jpg", "notes": "Cords Canada\u0027s range of non-metallic Clamps and Clips to hold, fasten and support. ¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "ADNYLONCLIP2660", "clsnbr": "030401", "catnm1": "Cords Canada Products", "catnm2": "Clamps and Clips", "catnm3": "Adhesive Nylon Wire and Cable Clips", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_AdhesiveNylonWireClip_700x450.jpg|CordsCanada_AdhesiveNylonWireClip_Dimen_650x600.jpg", "notes": "Backed with closed-cell, foamed polyurethane adhesive tape for excellent conformability, high temperature and solvent resistance, plus high ultimate bond strength. Mounting area should be clean, dry and dust free. Some porous surfaces may need priming before installation. Supplied on easy-to-use, perforated liner strips in sets of 6 to 10 pieces.", "grpatr": "D - Fraction|D (in)|D (mm)|L (in)|L (mm)|W - Fraction|W (in)|W (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "1909", "clsnbr": "030402", "catnm1": "Cords Canada Products", "catnm2": "Clamps and Clips", "catnm3": "Adjustable Cable Clamps", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_RenderScene_AdjustableCableClamp_800x800.jpg|ACC_AdjustableCableClamp_Dimensions_800x600.jpg", "notes": "These UL approved black nylon adjustable cable clamps can accommodate various cables to save you money. They are adhesive-backed and are easy to install, opening and closing for unlimited usage.", "grpatr": "A I.D. Range (in)|A I.D. Range (mm)|B Length (in)|B Length (mm)|C Width (in)|C Width (mm)|D Height (in)|D Height (mm)|E Base Thickness (in)|E Base Thickness (mm)|F Clamp Width (in)|F Clamp Width (mm)", "grpflg": "Y" }, { "clsnam": "1812", "clsnbr": "030403", "catnm1": "Cords Canada Products", "catnm2": "Clamps and Clips", "catnm3": "Black Nylon Clips", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_BlackNylionCli_750x600.jpg|BlackNylionClip_Dimensions_750x500.jpg", "notes": "Use as tube and wire supports, guides, bundlers. All devices snap through 1/4\u0022 diameter hole in 1/32\u0022 to 1/8\u0022 thick material. Maximum side width of all clips is 3/8\u0022.¶¶CT Closed top (wrap around)-single tube or bundles", "grpatr": "Tube OD (in)|Tube OD (mm)|Height Above Panel (in)|Height Above Panel (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "1910", "clsnbr": "030404", "catnm1": "Cords Canada Products", "catnm2": "Clamps and Clips", "catnm3": "Christmas Tree Clips Double End", "catnm4": "", "catnm5": "", "imgnme": "Cords_ChristmasTree_DoubleEnded_500x500.jpg|Cords_ChristmasTree_DoubleEnded_Dim_1200x400.jpg", "notes": "Double End - Unique ribbed shank design ensures fast, easy installation and secure holding in wide range of materials. Can be designed to withstand almost any required removal force. Several head and point styles available. Installation: One end of clip is pressed into hole in primary panel. Assembly is completed by pressing second panel onto projecting ribbed shank.", "grpatr": "Prong A - Point Style|Prong A - Hole Diameter (in)|Prong A - Hole Diameter (mm)|Prong A - Panel Thickness* (in)|Prong A - Panel Thickness* (mm)|Prong A - Prong Length A (in)[Prong A Length]|Prong A - Prong Length A (mm)[Prong A Length]|Prong C - Point Style|Prong C - Hole Diameter (in)|Prong C - Hole Diameter (mm)|Prong C - Panel Thickness (in)|Prong C - Panel Thickness (mm)|Prong C - Prong Length C (in)[Prong C Length]|Prong C - Prong Length C (mm)[Prong C Length]", "grpflg": "Y" }, { "clsnam": "1930", "clsnbr": "030405", "catnm1": "Cords Canada Products", "catnm2": "Clamps and Clips", "catnm3": "Christmas Tree Clips Single Head", "catnm4": "", "catnm5": "", "imgnme": "Cords_ChristmasTree_SingleHead_HeadStyles-1_750x500.jpg|Cords_ChristmasTree_SingleHead_PointStyles-1_750x500.jpg", "notes": "Unique ribbed shank design ensures fast, easy installation and secure holding in wide range of materials. Can be designed to withstand almost any required removal force. Several head and point styles available. Installation: As clip is pushed into place ribs deflect and then spring back after they pass through hole. Works effectively in prepared or blind holes.", "grpatr": "Point Style|Hole Diameter (in)|Hole Diameter (mm)|Panel Thickness* (in)|Panel Thickness* (mm)|Head Diameter A (in)|Head Diameter A (mm)|Head Type|Head Height B (in)|Head Height B (mm)|Prong Legnth C (in)|Prong Legnth C (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "1931", "clsnbr": "030406", "catnm1": "Cords Canada Products", "catnm2": "Clamps and Clips", "catnm3": "Heavy Duty Clips", "catnm4": "", "catnm5": "", "imgnme": "Cords_HeavyDutyClamp.800x800.jpg|HeavyDutyClip_Drawing_800x800.jpg", "notes": "For use with cable, tubing, rod, etc. These screw-mount clips are made of natural nylon and have reinforced sides which allow them to be used for heavier than normal loads. Designed also as space savers, you can use them on edges or in tight spots. Use with a #10 screw.", "grpatr": "D (in)|D (mm)|L (in)|L (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "1814", "clsnbr": "030407", "catnm1": "Cords Canada Products", "catnm2": "Clamps and Clips", "catnm3": "Hosers (Acetal Tube and Hose Clamps)", "catnm4": "", "catnm5": "", "imgnme": "Hosers_HoseClamps_750x750.jpg|Cords_HoseClamp_Dimensions_300x300.jpg", "notes": "A non-metallic clamp that will not rust, is non-conducting, not corroded by sea water and is stable in a wide variety of chemical salts, bases, alcohols, oil, grease, gasoline, etc. Often used in place of stainless clamps. Can be applied by quick ratchet closure, even after hose is in place. A lateral effort disengages the clamp. A stand and a pneumatic closing tool are aIso available. Stocked in acetal. Black heat- and UV-stabilized, glass-filled nylon (for outdoor or under the hood applications) also available at an additional charge.¶", "grpatr": "Diameter Range (in)|Diameter Range (mm)|Width (in)|Width (mm)|Colour", "grpflg": "Y" }, { "clsnam": "1205", "clsnbr": "030408", "catnm1": "Cords Canada Products", "catnm2": "Clamps and Clips", "catnm3": "Nail-In Cable Clips", "catnm4": "", "catnm5": "", "imgnme": "Cords_Nail-In_Cable_Clip-2.800x800.jpg|NICC_Nail-In_Cable_Clips_Dimensions_900x600.jpg", "notes": "These nail-in cable clips are used to safely install cable TV, fibre optics, computer networks, telephone and other communication systems, hydraulic and pneumatic systems.They are moulded in tough,¶ultra-violet resistant, electrically insulating, high density polyethylene. The main stress areas of the clip have reinforcing ribs designed into the part to strengthen and absorb impact. The contact edges are radiused to protect damage to cable or tubing. Pre-assembled with heat-treated, galvanized¶steel nails, ready for use in masonry, wood, stucco or plaster. Easily and efficiently installed.¶¶Standard colour: Black or white", "grpatr": "W (in)|W (mm)|H (in)|H (mm)|H1 (in)|H1 (mm)", "grpflg": "Y" }, { "clsnam": "NYADC2667", "clsnbr": "030409", "catnm1": "Cords Canada Products", "catnm2": "Clamps and Clips", "catnm3": "Nylon Adhesive C Clamps", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonAdhesiveC-Clamp_600x450.jpg|CordsCanada_Adhesive_C-Clamp_Dimensions_550x250.jpg|CordsCanada_Adhesive_C-Clamp_Instructions_700x450.jpg", "notes": "Exceptionally high performance clips use an easy-to-install adhesive mounting system to speed assembly, improve product appearance and to simplify wire run installations in almost any location.¶Convenient tabs allow for easy access to wire. Recommended installation and storage temperatures are 15° to 27°C. Available in 94V-0 Polypropylene material for an additional charge. Add -V0 suffix to part number when ordering.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|Max Bundle Dia. (in)|Max Bundle Dia. (mm)", "grpflg": "Y" }, { "clsnam": "NYCABC2668", "clsnbr": "030410", "catnm1": "Cords Canada Products", "catnm2": "Clamps and Clips", "catnm3": "Nylon Cable Clamps", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_BlackNylonClamp_500x500.jpg|CordsCanada_BlackNylonClamp_Dimension_700x500.jpg", "notes": "Nylon Cable Clamps for clamping cable or tubing securely into place.¶· Resist corrosion, salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. (This feature is not assessed by UL certification or testing.)¶· All parts are size marked in inches and millimeters.¶· Standard material Nylon 6/6.Cable clamps now also available in narrower (5/32\u0022 wide) format as well as wider (7/8\u0022) from 1/16\u0022 to 3/8\u0022 diameter.", "grpatr": "Mounting Hole Diameter (in)|Mounting Hole Diameter (mm)|Part Dimension A (in)|Part Dimension A (mm)|Center-to-Center Dimention B (in)|Center-to-Center Dimention B (mm)", "grpflg": "Y" }, { "clsnam": "NYQUCAB2669", "clsnbr": "030411", "catnm1": "Cords Canada Products", "catnm2": "Clamps and Clips", "catnm3": "Nylon Quick Cable Clamps", "catnm4": "", "catnm5": "", "imgnme": "Cords_QCC_NylonQuickCableClamp_800x800.jpg|Cords_QCC_NylonQuickCableClamp_Dim_900x600.jpg", "notes": "Moulded of nylon 6/6, these quick cable clamps are designed for one-handed installation. The design features an integrated ratchet fastener which eliminates the need for a screw or other fastener. They are self-aligning and the built-in handle allows for quick and easy installation without tools. ¶ Suitable for many different wire, cable or tubing routing applications. Perfect for field jobs. ¶ Designed to fit a 3/16\u0022 diameter hole.", "grpatr": "Bundle Diameter (in)|Bundle Diameter (mm)|A Knob Length (in)|A Knob Length (mm)|B Width (in)|B Width (mm)|C Clip Length (in)|C Clip Length (mm)", "grpflg": "Y" }, { "clsnam": "PATCLIPS2670", "clsnbr": "030412", "catnm1": "Cords Canada Products", "catnm2": "Clamps and Clips", "catnm3": "Polyacetal T-Clips", "catnm4": "", "catnm5": "", "imgnme": "Cords_Polyacetal_T-Clip_700x700.jpg|Cords_Polyacetal_T-Clip_Dimensions_850x450.jpg", "notes": "T-Clips provide a quick, adaptable and inexpensive answer to securing, attaching and routing of tubes, wires, hose and pipe. They are not only easy to use, but allow your installations to look extremely neat and professional. T-Clips provide uniform spacing to dual runs and can be mounted on walls, cabinets, boards, enclosures and bulkheads. They are available in a wide range of sizes to fit almost any circular-sectioned item. A countersunk centre hole is provided for the fastener of your choice. Many commercial applications, such as the installation of hydraulic hoses, electrical¶conduit and wires, telephone and fibre optics, liquid and gas tubing and pipes, and automotive hoses can benefit from the ease of installation, safety and the final look of the job.¶¶Standard Colour: Black.¶A wide range of colours is available by special order.¶*Spacers are available to fit T-Clips from numbers 8 to 22 to allow for additional spacing between the mounting face and the items to be secured. As many spacers as necessary can be used to provide required clearance, as the design allows stacking.¶¶Specifications:¶Materials: Polyacetal engineered plastic with ultraviolet inhibitors.¶Temperature Range: -40° to 212°F, -40° to 100° C.¶Mounting: Screw mount standard.", "grpatr": "Holding Range|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|F (in)|F (mm)|G (in)|G (mm)|H (in)|H (mm)", "grpflg": "Y" }, { "clsnam": "PUMTCLAMP2671", "clsnbr": "030413", "catnm1": "Cords Canada Products", "catnm2": "Clamps and Clips", "catnm3": "Push Mount Clamps", "catnm4": "", "catnm5": "", "imgnme": "Cords_Heyco_PushMountClamps_350x350.jpg|Cords_Heyco_PushMountClamps_Dimensions_450x350.jpg", "notes": "Can be used in a wide variety of environmental conditions and on any surface up to .080\u0022 thick. Just snap into a .250\u0022 hole and the push-mount will hold a 25 lb. continuous load and a 50 lb. impact load.¶Unique lock/release feature operates easily and locks securely.¶Available in 94V-0 polypropylene for an additional charge. Add-V0 suffix to part number when ordering.¶For use with chassis and panels .020\u0022 to .080\u0022 thick.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|F (in)|F (mm)|Max Bundle Dia. (in)|Max Bundle Dia. (mm)", "grpflg": "Y" }, { "clsnam": "TREECLIPS2672", "clsnbr": "030414", "catnm1": "Cords Canada Products", "catnm2": "Clamps and Clips", "catnm3": "Tree Clips", "catnm4": "", "catnm5": "", "imgnme": "Cords_TreeClips-01_900x900.jpg|Cords_TreeClips_Square-01_900x900.jpg", "notes": "A range of various designs of Tree Clips.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)", "grpflg": "Y" }, { "clsnam": "1454", "clsnbr": "030415", "catnm1": "Cords Canada Products", "catnm2": "Clamps and Clips", "catnm3": "Value-Line Tree Clips", "catnm4": "", "catnm5": "", "imgnme": "Cords_Value-Line_Type-R_800x800.jpg|Cords_ValueLine_TreeClips_Type-R_400x400.jpg|Cords_ValueLine_TreeClips_Type-X_400x400.jpg", "notes": "An economical alternative choice when you\u0027re looking for a branched tree-style clip. For use in drilled, punched or moulded threaded or non-threaded holes. Works with many materials including metal, wood, foam, rubber and plastic, in both solid and compressed forms. Push in/pull out forces may vary depending on variation in hole diameter.¶¶Standard colour: Natural. Also available in black.¶¶*Very popular for shelving and display construction.¶**Grained surface.", "grpatr": "Hole Size (in)|Hole Size (mm)|Panel Thickness (in)|Panel Thickness (mm)|Prong Length (in)|Prong Length (mm)|Prong Type|Head Diameter (in)|Head Diameter (mm)|Head Style", "grpflg": "Y" }, { "clsnam": "1816", "clsnbr": "0305", "catnm1": "Cords Canada Products", "catnm2": "Display Products", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_DisplayProduct_Group_800x600.jpg", "notes": "A collection of hinges, threaded posts \u0026 screw sets, screw covers and knobs.", "grpatr": "", "grpflg": "N" }, { "clsnam": "CNACPIHNG2688", "clsnbr": "030501", "catnm1": "Cords Canada Products", "catnm2": "Display Products", "catnm3": "Continuous Acrylic Piano Hinges", "catnm4": "", "catnm5": "", "imgnme": "Cords_AcrylicHinges_650x650.jpg", "notes": "This easy-to-apply hinge, moulded of special high strength acrylic, provides a trim, clean appearance. At the same time, it also adds extra strength and prevents warping. Simply align hinge properly and apply solvent. (Note: recessed channels restrict solvent flow to outer edges.) Neat and time saving.", "grpatr": "Size (in)|Size (mm)|Colour|Material", "grpflg": "Y" }, { "clsnam": "DLTHBSCKB2685", "clsnbr": "030502", "catnm1": "Cords Canada Products", "catnm2": "Display Products", "catnm3": "Delrin Thumb Screw Knobs", "catnm4": "", "catnm5": "", "imgnme": "DelrinThumbScrewKnobs_800x600.jpg", "notes": "As easy as 1-2-3. Pick a head style (knurled, rosette or tee); add a standard socket head cap screw, choose your method of cold-pressing them together. Say the magic words and presto! - you\u0027ve got an instant thumb screw knob.¶¶Minimum order 100.¶Stock colour: Black. Also available in red, gray and yellow.¶Metric sizes available.", "grpatr": "Head Style|Fits Screw #|A - Fraction|A (in)|A (mm)|B - Fraction|B (in)|B (mm)|C - Fraction|C (in)|C (mm)", "grpflg": "Y" }, { "clsnam": "HNGSCOV2690", "clsnbr": "030503", "catnm1": "Cords Canada Products", "catnm2": "Display Products", "catnm3": "Hinged Screw Covers", "catnm4": "", "catnm5": "", "imgnme": "Cords_HingedScrewCovers_400x400.jpg|Cords_ScrewCoverHinged_White-01_600x600.jpg|Cords_ScrewCoverHinged_Black-01_600x600.jpg", "notes": "Hinged Screw Covers¶¶Minimum order 1000.¶Stock colours: Black and white¶Matte finish only.", "grpatr": "Screw Size|Cover Diameter - Fraction|Cover Diameter (in)|Cover Diameter (mm)|Installed Height - Fraction|Installed Height (in)|Installed Height (mm)", "grpflg": "Y" }, { "clsnam": "PLEDMNHNG2687", "clsnbr": "030504", "catnm1": "Cords Canada Products", "catnm2": "Display Products", "catnm3": "Plastic Edge-Mounting Hinges", "catnm4": "", "catnm5": "", "imgnme": "Cords_PlasticEdgeMountHinge_Dim_600x600.jpg", "notes": "This polypropylene hinge just slips over edge of material.¶¶Sold in 6-ft. lengths only.¶Stock colour: White. Black \u0026 brown available (minimum 1000 feet).¶Other sizes available.", "grpatr": "Panel Size - Fraction|Panel Size (in)|Panel Size (mm)", "grpflg": "Y" }, { "clsnam": "PLFLPOHNG2686", "clsnbr": "030505", "catnm1": "Cords Canada Products", "catnm2": "Display Products", "catnm3": "Plastic Flat Polyolefin Hinges", "catnm4": "", "catnm5": "", "imgnme": "Cords_Hinge_Flat_Polyolefin_800x500.jpg", "notes": "Easily cut to size and may be installed¶with staples, nails or screws.¶¶Sold in full rolls only (100 ft./roll).¶Colours: 638-H and 639-H stocked in black and white.¶Also available in brown (minimum 1000 feet).¶161-H available in clear (natural) only.", "grpatr": "Width - Fraction|Width (in)|Width (mm)|Thickness - Fraction|Thickness (in)|Thickness (mm)|Colour", "grpflg": "Y" }, { "clsnam": "SCCPBS2689", "clsnbr": "030506", "catnm1": "Cords Canada Products", "catnm2": "Display Products", "catnm3": "Screw Covers - Cap and Base Sets", "catnm4": "", "catnm5": "", "imgnme": "Cords_ScrewCover_Cap-Group-01_500x500.jpg|Cords_ScrewCover_Base-01_400x400.jpg", "notes": "Made of UV-stabilized polypropylene, screw covers can be used in most environments to protect and enhance screw, nail and rivet heads. Give a handsome finishing touch to furniture, boats, clean rooms, office appliances, etc. They may also act as bumpers, glides or feet and reduce electrical hazards. With glass, ceramics or other easily-chipped surfaces, these provide excellent protection from metal fasteners. Use them with pan, round, fillister or binding head fasteners. Note: A special base for use with flat or oval head screws is available at no extra charge.¶¶Minimum order 1000.¶Stock colours*: Glossy white or black, matte white, black or brown. Please specify matte or glossy and colour when ordering.¶Also available in many other colours (colour matching is possible).¶* Base colour is natural.", "grpatr": "Screw Size|Cover Diameter (in)|Cover Diameter (mm)|Installed Height (in)|Installed Height (mm)", "grpflg": "Y" }, { "clsnam": "SCCDMCP2691", "clsnbr": "030507", "catnm1": "Cords Canada Products", "catnm2": "Display Products", "catnm3": "Screw Covers - Hex Dome Caps", "catnm4": "", "catnm5": "", "imgnme": "Cords_ScrewCover_DomeHexCaps-Group-01_500x500.jpg|Cords_ScrewCover_DomeHexCaps-White-01_700x700.jpg|Cords_ScrewCover_DomeHexCaps-Black-01_700x700.jpg", "notes": "No special tools required. Just press onto nut or screw head. Moulded in low density polyethylene.¶Available in black or white.", "grpatr": "Hex Nut or Screw Size - Fraction|Hex Nut or Screw Size (in)|Hex Nut or Screw Size (mm)", "grpflg": "Y" }, { "clsnam": "THPSCLBU2692", "clsnbr": "030508", "catnm1": "Cords Canada Products", "catnm2": "Display Products", "catnm3": "Threaded Posts \u0026 Screws - Clear", "catnm4": "", "catnm5": "", "imgnme": "Cords_ThreadPostScrew_PC_350x350.jpg|Cords_ThreadedPostScrew_PC-Dim_700x700.jpg", "notes": "A clear fastener set used to bind loose leaf and sample books, offering easy access to replace sheets. Keep keys together.¶Fits 5.5mm (7/32\u0022) to 7mm (9/32\u0022) hole. Screws for all lengths are #8.¶Material: Butyrate¶", "grpatr": "Length - Fraction|Length (in)|Length (mm)", "grpflg": "Y" }, { "clsnam": "THPSPRTG2693", "clsnbr": "030509", "catnm1": "Cords Canada Products", "catnm2": "Display Products", "catnm3": "Threaded Posts \u0026 Screws - Press-Together", "catnm4": "", "catnm5": "", "imgnme": "Cords_ThreadPostScrewSet_350x350.jpg", "notes": "LDPE Posts / Nylon Screws¶No tools required. Sets can be pressed together for easy, quick assembly into 1/4\u0022 holes. Screws must be unscrewed to open sets.¶Stock head is slotted, which is recommended where assembly modification is required.¶Screw lengths: 1/4\u0022 with 1/4\u0022 posts, 3/8\u0022 with 3/8\u0022 to 3/4\u0022 posts and .690\u0022 with 1\u0022 to 2\u0022 posts. Screws for all lengths are #10.¶¶Minimum order 1000.¶Standard colour: White LDPE/white nylon.¶Black available at an extra charge. Use suffix BL when ordering.¶Other styles are also available. Use suffixes shown below when ordering.¶U: unslotted (lengths from 1\u0022 to 2\u0022)¶TU: thin unslotted¶LH: large 9/16\u0022 diameter head (lengths from 1/4\u0022 to 3/4\u0022)¶TPS: thin posts and screws for 7/32\u0022 hole with 3/8\u0022 diameter¶head (lengths from 3/8\u0022 to 7/8\u0022)", "grpatr": "Length - Fraction|Length (in)|Length (mm)", "grpflg": "Y" }, { "clsnam": "THPSRTAS2694", "clsnbr": "030510", "catnm1": "Cords Canada Products", "catnm2": "Display Products", "catnm3": "Threaded Posts \u0026 Screws - Ratchet Assembly", "catnm4": "", "catnm5": "", "imgnme": "Cords_ThreadPostScrewSet_350x350.jpg|Cords_ThreadPostScrew_Ratchet_750x600.jpg", "notes": "Ratchet assembly posts and screws feature screws with serrated pins, which allow for a variable and more secure assembly. Simply press together for fast connection. Parts ratchet together to automatically secure flat panels, punched papers, fabric swatches, key cases, calendars, etc. Because they\u0027re made of polypropylene, they are useful for corrosive environments. These are not for applications which require a reuseable fastener.¶¶Minimum order 1000.¶Standard colour: Black or white.¶Also available in other colours (colour matching is possible).", "grpatr": "Length - Fraction|Length (in)|Length (mm)", "grpflg": "Y" }, { "clsnam": "1802", "clsnbr": "0306", "catnm1": "Cords Canada Products", "catnm2": "Feet and Bumpers", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_TPE-Foot_Group_600x600.jpg", "notes": "Feet and Bumpers in various styles, sizes and materials. Use them as spacers, feet, cushions, protectors, vibration and shock absorbers.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1300", "clsnbr": "030601", "catnm1": "Cords Canada Products", "catnm2": "Feet and Bumpers", "catnm3": "Self-Adhesive Feet and Bumpers", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_TPE-Foot_Group_600x600.jpg|Cords_SemiCircularFoot_White_300x300.jpg|Cords_TaperedCylindeFootr_TPE-White_300x300.jpg|Cords_TaperedCylindeFootr_TPE-Gray_300x300.jpg|Cords_CircularDepression_Black_300x300.jpg|Cords_BumpersFeet_SquareTapeClear_300x300.jpg|Cords_CircularDepression_Clear_300x300.jpg|Cords_TaperedCylindeFootr_TPE-Clear_300x300.jpg|Cords_SemiCircularFoot_Black_300x300.jpg|Cords_TaperedConical_Black_300x300.jpg|Cords_TaperedConical_Clear_300x300.jpg", "notes": "With no holes to drill and no screws or rivets needed, self-adhesive bumpers will save you time and money. Kiss-cut for easy application, they simply peel off and press onto almost any smooth surface. They are non-marring, nonstaining, skid and scratch resistant and they won\u0027t harden or crack. Use them as spacers, feet, cushions, protectors, vibration and shock absorbers.¶¶Typical applications: glass and wood doors and drawers, small appliances, telephones, furniture, desktop and office equipment, housewares, advertising displays, wall protectors. Bonding surface guide: aluminum, ceramic, formica, painted surfaces, glass, steel, polyethylene, polypropylene, polystyrene and rigid vinyl. Rubber-based adhesive is stocked and acrylic-based is available. (High surface energy plastics such as formica, acrylic and polycarbonates adhere best to acrylic-based adhesives. Low surface energy plastics such as polyethylene and polypropylene will adhere best to rubber-based adhesives.)¶¶Stock colours: Black or clear.¶White, brown and gray available in carton quantity only.¶¶Tolerance all dimensions: ±.020¶U 33 not recommended as weight bearing.¶User should evaluate product suitability for a specific application under actual use conditions.¶¶Contact us for a quote on special shapes and colours available.", "grpatr": "Height (in)|Height (mm)|Width (in)|Width (mm)|Description|Colour", "grpflg": "Y" }, { "clsnam": "1815", "clsnbr": "030602", "catnm1": "Cords Canada Products", "catnm2": "Feet and Bumpers", "catnm3": "TPE and HDPE Series", "catnm4": "", "catnm5": "", "imgnme": "Cords_TaperedPocketCylinder_TPE-Black_600x600.jpg", "notes": "TPE Series (Thermoplastic Elastomer - 75 Durometer - Non-skid)¶¶For appliances, electronics, furniture, lids, cabinets, etc.¶Please specify colour when ordering.¶¶HDPE Series (HDPE material)", "grpatr": "H - Fraction|H (in)|H (mm)|OD - Fraction|OD (in)|OD (mm)|D - Fraction|D (in)|D (mm)|Screw Size|L - Fraction|L (in)|L (mm)|E - Fraction|E (in)|E (mm)|Series", "grpflg": "Y" }, { "clsnam": "LTCCF2695", "clsnbr": "0307", "catnm1": "Cords Canada Products", "catnm2": "Liquid Tight Connectors, Conduit and Fittings", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "Cords_Heyco_LTC_Group_800x640.jpg", "notes": "A range of Heyco Liquid Tight connectors, conduit and fittings that are designed to work together for easy installation and to resist salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.", "grpatr": "", "grpflg": "N" }, { "clsnam": "LTCOND2696", "clsnbr": "030701", "catnm1": "Cords Canada Products", "catnm2": "Liquid Tight Connectors, Conduit and Fittings", "catnm3": "Liquid Tight Conduit", "catnm4": "", "catnm5": "", "imgnme": "Cords_Heyco_LT_Conduit_450x450.jpg|Cords_Heyco_LT_Conduit_Dimensions_500x400.jpg", "notes": "This UL Type B flexible, non-metallic tubing resists corrosion, abrasion, oil, water, acid, metal shavings and rough environments. It is for use with nylon straight, snap-in or sweep connectors as well as steel and die cast connectors. Mounting brackets are also available. Resists abuse, pull and crushing. Smooth inside for easier wire pulling; will not harm conductors. No hazardous sharp edges or burrs.¶Quick installation. Suitable for indoor/outdoor use.¶Manufactured of flexible PVC.", "grpatr": "Trade Size - Fraction|Trade Size (in)|Trade Size (mm)|A Outside Diameter (in)|A Outside Diameter (mm)|B Inside Diameter (in)|B Inside Diameter (mm)", "grpflg": "Y" }, { "clsnam": "LTCONSPIN2700", "clsnbr": "030702", "catnm1": "Cords Canada Products", "catnm2": "Liquid Tight Connectors, Conduit and Fittings", "catnm3": "Liquid Tight Connectors - Snap-In", "catnm4": "", "catnm5": "", "imgnme": "Cords_Heyco_LTC_Snap-In_450x450.jpg|Cords_Heyco_Snap-In_Dimensions_850x400.jpg", "notes": "All nylon construction resists salt water, gasoline, oil, alcohol, weak acids, grease and common solvents. Assembly friendly! Just push the conduit or tubing onto the ferrule, then tighten the domed sealing nut. Completed assembly can then be snapped into the chassis with fingertip pressure. No threading of the conduit or tubing required, eliminating the possibility of cutting the conduit and creating leak paths.¶Suitable for indoor/outdoor use. Completely reusable.", "grpatr": "Fits Conduit Trade Size - Fraction|Fits Conduit Trade Size (in)|Fits Conduit Trade Size (mm)|A mounting Hole Diameter (in)|A mounting Hole Diameter (mm)|B Maximum OA length (in)|B Maximum OA length (mm)|C Body Length (in)|C Body Length (mm)|D Wrenching Nut Thickness (in)|D Wrenching Nut Thickness (mm)|E Wrenching Flats (in)|E Wrenching Flats (mm)", "grpflg": "Y" }, { "clsnam": "LTCONSTR2698", "clsnbr": "030703", "catnm1": "Cords Canada Products", "catnm2": "Liquid Tight Connectors, Conduit and Fittings", "catnm3": "Liquid Tight Connectors - Straight", "catnm4": "", "catnm5": "", "imgnme": "Cords_Heyco_Straight-Thru-Fitting_450x450.jpg|Cords_Heyco_Straight_Dimensions_850x400.jpg", "notes": "All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease and common solvents. No disassembly required. Just push the conduit/tubing onto the ferrule, then tighten the domed sealing nut. This completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole). No threading of the conduit or tubing is required, eliminating the chance of cutting the conduit and creating leak paths. Complete connector is reusable.¶Use of a sealing washer may be needed for wet locations. Suitable for indoor/outdoor use, for original equipment manufacturers or field installers. Black connectors provided with nylon locknut, packed separately. Gray connectors provided with assembled o-ring and metal locknuts.", "grpatr": "Fits Conduit Trade Size - Fraction|Fits Conduit Trade Size (in)|Fits Conduit Trade Size (mm)|A Clearance Hole (in)|A Clearance Hole (mm)|B Maximum OA Length (in)|B Maximum OA Length (mm)|C Thread Length (in)|C Thread Length (mm)|D Wrenching Nut Thickness (in)|D Wrenching Nut Thickness (mm)|E Wrenching Flats (in)|E Wrenching Flats (mm)|Sealing Washer", "grpflg": "Y" }, { "clsnam": "LTCONSWP2699", "clsnbr": "030704", "catnm1": "Cords Canada Products", "catnm2": "Liquid Tight Connectors, Conduit and Fittings", "catnm3": "Liquid Tight Connectors - Sweep", "catnm4": "", "catnm5": "", "imgnme": "Cords_Heyco_LTC_Sweep_450x400.jpg|Cords_Heyco_LTC_Sweep_Dimensions_700x450.jpg", "notes": "All the same functions as the straight connectors but offer more flexibility. Complete connector is reusable. Smooth internal surfaces for easier wire installation. Black connectors provided with nylon locknut, packed separately. Use of a sealing washer may be required for wet locations. See page 92. Gray connectors provided with assembled o-ring and metal locknut.¶Suitable for indoor/outdoor use, for original equipment¶manufacturers or field installers.", "grpatr": "Fits Conduit Trade Size - Fraction|Fits Conduit Trade Size (in)|Fits Conduit Trade Size (mm)|Thread Size|A Clearance Hole (in)|A Clearance Hole (mm)|B Maximum OA Height (in)|B Maximum OA Height (mm)|C Maximum OA Length (in)|C Maximum OA Length (mm)|D Thread Length (in)|D Thread Length (mm)|Sealing Washer", "grpflg": "Y" }, { "clsnam": "LTKOSEALS2713", "clsnbr": "030705", "catnm1": "Cords Canada Products", "catnm2": "Liquid Tight Connectors, Conduit and Fittings", "catnm3": "Liquid Tight Knock-Out Seals", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Knock-OutSeal_450x450.jpg|CordsCanada_Knock-OutSeal_Dimensions_600x400.jpg", "notes": "These liquid tight knock-out seals are made of Santoprene 251-80 and are oil and rain tight and fully submersible. They lock firmly into boxes up to .125\u0022 thick and install with fingertip pressure (no¶tools required).", "grpatr": "Trade Size|Mounting Hole Diamter (in)|Mounting Hole Diamter (mm)|A Head Diameter (in)|A Head Diameter (mm)|B Overall Height (in)|B Overall Height (mm)|Max. Chassis Thickness (in)|Max. Chassis Thickness (mm)|C Head Thickness (in)|C Head Thickness (mm)", "grpflg": "Y" }, { "clsnam": "LTTUBING2697", "clsnbr": "030706", "catnm1": "Cords Canada Products", "catnm2": "Liquid Tight Connectors, Conduit and Fittings", "catnm3": "Liquid Tight Tubing", "catnm4": "", "catnm5": "", "imgnme": "Cords_Heyco_LiquidTightTubing-1_500x450.jpg|Cords_Heyco_LiquidTightTubing_Dimensions_500x400.jpg", "notes": "Same advantages as the liquid tight conduit but has more flexibility and can be used in extremely tight quarters. Manufactured of flexible PVC, it is ideal for fibre optic cable protection and is also suitable for use in high vibration or flexing applications.", "grpatr": "Trade Size - Fraction|Trade Size (in)|Trade Size (mm)|A Outside Diameter (in)|A Outside Diameter (mm)|B Inside Diameter (in)|B Inside Diameter (mm)", "grpflg": "Y" }, { "clsnam": "LTLOCKNUTS2715", "clsnbr": "030707", "catnm1": "Cords Canada Products", "catnm2": "Liquid Tight Connectors, Conduit and Fittings", "catnm3": "Locknuts", "catnm4": "", "catnm5": "", "imgnme": "Cords_LT_Locknuts_450x450.jpg|Cords_LT_Locknuts_Dimensions_600x400.jpg", "notes": "Nylon Locknuts¶NPT Thread-Straight NPS Threads for use with NPT Threaded Fittings¶PG Thread¶¶Standard colours: Black or Gray¶¶Material Nylon 6/6¶Flammability Rating 94V-2 Standard-Consult Cords for VO material¶Temperature Range -40°F (-40°C) to 221°F (105°C)", "grpatr": "Thread Type|Thread Size|A (in)|A (mm)|B (in)|B (mm)", "grpflg": "Y" }, { "clsnam": "MOUNTBRACKET2712", "clsnbr": "030708", "catnm1": "Cords Canada Products", "catnm2": "Liquid Tight Connectors, Conduit and Fittings", "catnm3": "Mounting Brackets", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_MountingBrackets_LT_450x450.jpg|CordsCanada_MountingBrackets_LT_Dims_600x400.jpg", "notes": "Used to mount liquid tight conduit or tubing securely into place, vertically or horizontally. Only fingertip pressure is required. Low profile design for pleasing appearance and space saving. ¶ Recommended distance between brackets: intervals not greater than 3 ft. Use one standard #10 screw (not included) to attach bracket to panel or chassis.", "grpatr": "Trade Size|A Inside Diameter (in)|A Inside Diameter (mm)|B Length (in)|B Length (mm)|C Height (in)|C Height (mm)|D Outiside Diameter (in)|D Outiside Diameter (mm)|E Width (in)|E Width (mm)", "grpflg": "Y" }, { "clsnam": "PTLTFNPTHUB2708", "clsnbr": "030709", "catnm1": "Cords Canada Products", "catnm2": "Liquid Tight Connectors, Conduit and Fittings", "catnm3": "Pigtail Liquid Tight Fittings - NPT Hubs", "catnm4": "", "catnm5": "", "imgnme": "Cords_Pigtail_LTF_PG-Hubs_400x400.jpg|Cords_Pigtail_LTF_PG-Hubs_Dim_650x400.jpg", "notes": "(Locknnuts Not Included)¶The Pigtail fitting has a flexible extender to prevent sharp bends and extend cable life. Acme threads on body prevent skipping and speed installation.¶Also available in metric.", "grpatr": "Cable Dia. Range Min.- Max. (in)|Cable Dia. Range Min.- Max. (mm)|Thread Type \u0026 Size|A Clearance Hole (in)|A Clearance Hole (mm)|B Max. O.A. Length (in)|B Max. O.A. Length (mm)|C Thread Length (in)|C Thread Length (mm)|D Wrenching Nut Thick. (in)|D Wrenching Nut Thick. (mm)|E Wrenching Flats (in)|E Wrenching Flats (mm)", "grpflg": "Y" }, { "clsnam": "PTLTFPGHUB2707", "clsnbr": "030710", "catnm1": "Cords Canada Products", "catnm2": "Liquid Tight Connectors, Conduit and Fittings", "catnm3": "Pigtail Liquid Tight Fittings - PG Hubs", "catnm4": "", "catnm5": "", "imgnme": "Cords_Pigtail_LTF_PG-Hubs_400x400.jpg|Cords_Pigtail_LTF_PG-Hubs_Dim_650x400.jpg", "notes": "(LOCKNUTS INCLUDED)¶The Pigtail fitting has a flexible extender to prevent sharp bends and extend cable life. Acme threads on body prevent skipping and speed installation.¶Also available in metric.", "grpatr": "Cable Dia. Range Min.- Max. (in)|Cable Dia. Range Min.- Max. (mm)|Thread Type \u0026 Size|A Clearance Hole (in)|A Clearance Hole (mm)|B Max. O.A. Length (in)|B Max. O.A. Length (mm)|C Thread Length (in)|C Thread Length (mm)|D Wrenching Nut Thick. (in)|D Wrenching Nut Thick. (mm)|E Wrenching Flats (in)|E Wrenching Flats (mm)", "grpflg": "Y" }, { "clsnam": "RALTFNPTHUB2710", "clsnbr": "030711", "catnm1": "Cords Canada Products", "catnm2": "Liquid Tight Connectors, Conduit and Fittings", "catnm3": "Right-Angle Liquid Tight Fittings - NPT Hubs", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_RightAngle_LTF_450x450.jpg|CordsCanada_RightAngle_LTF_NPT-Hub_700x400.jpg", "notes": "(Locknuts not included)¶Each cordgrip is moulded in the open position for ease of installation. After cable insertion, the¶fitting snaps closed, bending the cable without damage, saving considerable time and money. Part design provides liquid tight integrity even in the open position. Acme threads on body prevent skipping and speed installation. All-nylon with TPE gland, resists salt water, weak acids, gasoline, oil, alcohol, grease and common solvents. This feature is not assessed by UL certification and testing.¶Available in metric.", "grpatr": "Cable Dia. Range Min.- Max. (in)|Cable Dia. Range Min.- Max. (mm)|Thread Type \u0026 Size|A Clearance Hole (in)|A Clearance Hole (mm)|B Right Angle Ht. (in)|B Right Angle Ht. (mm)|C (Closed) Max. O.A Length (in)|C (Closed) Max. O.A Length (mm)|D Thread Length (in)|D Thread Length (mm)|E Sealing Nut Length (in)|E Sealing Nut Length (mm)|F Wrenching Flats (in)|F Wrenching Flats (mm)", "grpflg": "Y" }, { "clsnam": "RALTFPGHUB2709", "clsnbr": "030712", "catnm1": "Cords Canada Products", "catnm2": "Liquid Tight Connectors, Conduit and Fittings", "catnm3": "Right-Angle Liquid Tight Fittings - PG Hubs", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_RightAngle_LTF-PG_450x450.jpg|CordsCanada_RightAngle_LTF_PG-Hub_700x400.jpg", "notes": "Locknuts Included)¶Each cordgrip is moulded in the open position for ease of installation. After cable insertion, the¶fitting snaps closed, bending the cable without damage, saving considerable time and money. Part design provides liquid tight integrity even in the open position. Acme threads on body prevent skipping and speed installation. All-nylon with TPE gland, resists salt water, weak acids, gasoline, oil, alcohol, grease and common solvents. This feature is not assessed by UL certification and testing.¶Available in metric.", "grpatr": "Cable Dia. Range Min.- Max. (in)|Cable Dia. Range Min.- Max. (mm)|Thread Type \u0026 Size|A Clearance Hole (in)|A Clearance Hole (mm)|B Right Angle Ht. (in)|B Right Angle Ht. (mm)|C (Closed) Max. O.A Length (in)|C (Closed) Max. O.A Length (mm)|D Thread Length (in)|D Thread Length (mm)|E Sealing Nut Length (in)|E Sealing Nut Length (mm)|F Wrenching Flats (in)|F Wrenching Flats (mm)", "grpflg": "Y" }, { "clsnam": "LTSEALWASH2716", "clsnbr": "030713", "catnm1": "Cords Canada Products", "catnm2": "Liquid Tight Connectors, Conduit and Fittings", "catnm3": "Sealing Washers", "catnm4": "", "catnm5": "", "imgnme": "Cords_LT_SealingWasher_400x400.jpg|Cords_LT_SealingWasher_Dimensions_600x400.jpg", "notes": "Manufactured of Thermoplastic Elastomer, these washers have special double sealing ridges to compensate for minor unevenness at enclosure. Suitable for wet locations requiring a separate gasket between the box and fitting.¶Liquid tight, dust tight and oil tight at enclosure.¶Easy to install since washers seal off on the perimeter, not on the connector threads.", "grpatr": "Fits Electrical Fitting Trade Size NPT|A Inside Diameter (in)|A Inside Diameter (mm)|B outside Diameter (in)|B outside Diameter (mm)|C Thickness (in)|C Thickness (mm)", "grpflg": "Y" }, { "clsnam": "SNAPINLTGROM2711", "clsnbr": "030714", "catnm1": "Cords Canada Products", "catnm2": "Liquid Tight Connectors, Conduit and Fittings", "catnm3": "Snap-In Liquid Tight Grommets", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Snap-In_LT_Grommets_450x450.jpg|CordsCanada_Snap-In_LT_Grommets_Dims_900x900.jpg", "notes": "Gray moulded EPDM grommet is fire tested to FMVSS 302, vehicle safety norm 302 (DIN 75200) to provide light strain relief to the cable. Material hardness 50 shore A. Just snap into place, pierce thin membrane, insert and pull back cable. Protection Class IP 67 per EN60529.", "grpatr": "Cable Diameter Range (in)|Cable Diameter Range (mm)|Panel Hole Diameter (in)|Panel Hole Diameter (mm)|Panel Thickness Range (in)|Panel Thickness Range (mm)|A Head Diamter (in)|A Head Diamter (mm)|B Head Thickness (in)|B Head Thickness (mm)|C Overall Length (in)|C Overall Length (mm)", "grpflg": "Y" }, { "clsnam": "STLTFNPTHUB2706", "clsnbr": "030715", "catnm1": "Cords Canada Products", "catnm2": "Liquid Tight Connectors, Conduit and Fittings", "catnm3": "Straight-Thru Liquid Tight Fittings - NPT Hubs", "catnm4": "", "catnm5": "", "imgnme": "Cords_Straight-Thru_LTF_PG-Hubs_450x450.jpg|Cords_Straight-Thru_LTF_PG-Hubs_Dim_600x400.jpg", "notes": "(LOCKNUTS NOT INCLUDED)¶All nylon construction with BUNA-N compression gland resists salt water, weak acids, gasoline, alcohol, oil, grease and common solvents. Fittings install in either clearance or threaded holes. Acme threads prevent skipping and speed installation. The domed sealing nut resists snags and sheds contaminants. An internal ratchet provides self-locking against vibration.¶Working temperatures: -22°F (-30°C) to 212°F (100°C). For short periods to 302°F (150°C). Protection class IP 68 per DIN 40050 up to 70 psi (5 bar) water pressure.¶Available in metric.¶¶INSTALLATION NOTE:¶For optimum liquid tightness, use fitting with the smallest maximum diameter that will still fit your application.", "grpatr": "Cable Dia. Range Min.-Max. (in)|Cable Dia. Range Min.-Max. (mm)|Thread Type \u0026 Size|A Clearance Hole (in)|A Clearance Hole (mm)|B Max. O.A. Length (in)|B Max. O.A. Length (mm)|C Thread Length (in)|C Thread Length (mm)|D Wrenching Nut Thick. (in)|D Wrenching Nut Thick. (mm)|E Wrenching Flats (in)|E Wrenching Flats (mm)", "grpflg": "Y" }, { "clsnam": "STLTFPGHUB2705", "clsnbr": "030716", "catnm1": "Cords Canada Products", "catnm2": "Liquid Tight Connectors, Conduit and Fittings", "catnm3": "Straight-Thru Liquid Tight Fittings - PG Hubs", "catnm4": "", "catnm5": "", "imgnme": "Cords_Straight-Thru_LTF_PG-Hubs_450x450.jpg|Cords_Straight-Thru_LTF_PG-Hubs_Dim_600x400.jpg", "notes": "(Locknuts Included)¶All nylon construction with BUNA-N compression gland resists salt water, weak acids, gasoline, alcohol, oil, grease and common solvents. Fittings install in either clearance or threaded¶holes. Acme threads prevent skipping and speed installation. The domed sealing nut resists snags and sheds contaminants. An internal ratchet provides self-locking against vibration.¶Working temperatures: -22°F (-30°C) to 212°F (100°C). For short periods to 302°F (150°C). Protection class IP 68 per DIN 40050 up to 70 psi (5 bar) water pressure.¶Available in metric.", "grpatr": "Cable Dia. Range Min.-Max. (in)|Cable Dia. Range Min.-Max. (mm)|Thread Type \u0026 Size|A Clearance Hole (in)|A Clearance Hole (mm)|B Max. O.A. Length (in)|B Max. O.A. Length (mm)|C Thread Length (in)|C Thread Length (mm)|D Wrenching Nut Thick. (in)|D Wrenching Nut Thick. (mm)|E Wrenching Flats (in)|E Wrenching Flats (mm)", "grpflg": "Y" }, { "clsnam": "1809", "clsnbr": "0308", "catnm1": "Cords Canada Products", "catnm2": "Push-in Fasteners and Rivets", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_PushInFastenersRivetsGroup-800x600.jpg", "notes": "Non-metallic fasteners useful for joining plastic, light sheet metal, insulating material, etc. May be used as glides, bumpers and hole plugs. Including plastic rivets in various styles and materials. Also push-in wall plugs, screw-in wall fasteners and snap-latch fasteners. ¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1818", "clsnbr": "030801", "catnm1": "Cords Canada Products", "catnm2": "Push-in Fasteners and Rivets", "catnm3": "Belly Buttons", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_BellyButton_Image_800x800.jpg|CordsCanada_BellyButton_Dimensions-01_800x800.jpg|CordsCanada_BellyButton_Installation_800x600.jpg", "notes": "Reusable push-in fasteners for metal, wood, plastic, or any thin-gauge materials. Made of nylon, they resist vibration, abrasion, corrosion, and may be used for electrical insulating.¶¶¶Other sizes available", "grpatr": "Hole Size (in)|Hole Size (mm)|Chassis Thickness (in)|Chassis Thickness (mm)|D (in)|D (mm)|H (in)|H (mm)|C (in)|C (mm)|L (in)|L (mm)", "grpflg": "Y" }, { "clsnam": "PIFRDUGOUT2717", "clsnbr": "030802", "catnm1": "Cords Canada Products", "catnm2": "Push-in Fasteners and Rivets", "catnm3": "Dugouts", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada-Dugout_400x400.jpg|CordsCanada_Dugout_PCBoard_672x568.jpg|CordsCanada_Dugout_Dims_500x600.jpg|CordsCanada_Dugout_HeadStyles_400x600.jpg", "notes": "Low cost replacement for screws and rivets. Dugouts snap into round holes securely holding in metal, plastic and a variety of materials. Ideal for assembling gaskets, nameplates and lightweight panels to other panels and components.¶Installation: As fastener is pushed into hole, hollow prong compresses, returning to its original shape once it passes through hole.", "grpatr": "Head Style|Panel Hole Diameter (in)|Panel Hole Diameter (mm)|A Panel Thickness Range (in)|A Panel Thickness Range (mm)|B Head Height (in)|B Head Height (mm)|C Head Diameter (in)|C Head Diameter (mm)|D Prong Length (in)|D Prong Length (mm)", "grpflg": "Y" }, { "clsnam": "PIFRNYACRIV2719", "clsnbr": "030803", "catnm1": "Cords Canada Products", "catnm2": "Push-in Fasteners and Rivets", "catnm3": "Nylon Anchor Rivets", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonAnchorRivet_Image-03_800x500.jpg|CordsCanada_NylonAnchorRivet_Dims_800x400.jpg", "notes": "Corrosion and vibration resistant blind fastener, with a nylon drive pin that offers better thermal and electrical qualities than metal pins. This versatile and inexpensive rivet is quickly installed in pre-drilled holes. Driving the pin home with the tap of a hammer expands and seats the fastener securely.¶Typically used with signs, electrical and plumbing fixtures, drapery and window hardware, railings, shelves and in many facets of trailer construction.", "grpatr": "Length - Fraction|Length (in)|Length (mm)|Drill Hole - Fraction|Drill Hole (in)|Drill Hole (mm)|Head Style|D (in)|D (mm)|T (in)|T (mm)", "grpflg": "Y" }, { "clsnam": "PIFRNYRIVET2722", "clsnbr": "030804", "catnm1": "Cords Canada Products", "catnm2": "Push-in Fasteners and Rivets", "catnm3": "Nylon Rivets", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonRivets_600x800.jpg|CordsCanada_NylonRivets_Dimensions_500x700.jpg", "notes": "These one-piece blind drive rivets are permanent fasteners that can be used with plastics, sheet metal, printed circuit boards, etc. Perfect for fastening when only one side of work piece is accessible. No tools are required; the drive pin, when forced in, expands the legs to securely lock components in place, even under extreme vibration.", "grpatr": "Nominal Hole D (in)|Nominal Hole D (mm)|Panel Thickness (in)|Panel Thickness (mm)|Head Style|OD (in)|OD (mm)|T (in)|T (mm)|L (in)|L (mm)|P (in)|P (mm)", "grpflg": "Y" }, { "clsnam": "PIFRNYWALPL2720", "clsnbr": "030805", "catnm1": "Cords Canada Products", "catnm2": "Push-in Fasteners and Rivets", "catnm3": "Nylon Wall Plugs", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonWallPlugs_350x350.jpg|CordsCanada_WallAnchors_Dimensions_600x400.jpg", "notes": "The expanded rim prevents the loss of the wall plugs inside the hole. Non-twist fins keep them firmly in place and stop rotation.¶For use with wood, concrete, tile, brick, sheet metal. Use with wood or sheet metal screws.", "grpatr": "Drill - Fraction|Drill (in)|Drill (mm)|L - Fraction|L (in)|L (mm)|D - Fraction|D (in)|D (mm)|T (in)|T (mm)", "grpflg": "Y" }, { "clsnam": "1466", "clsnbr": "030806", "catnm1": "Cords Canada Products", "catnm2": "Push-in Fasteners and Rivets", "catnm3": "Push-In Fasteners", "catnm4": "", "catnm5": "", "imgnme": "Cords_Push-In_Fasteners_750x750.jpg|Cords_Push-In_Fasteners_Dimensions_800x600.jpg", "notes": "These natural nylon fasteners are useful for joining plastic, light sheet metal, insulating material, etc. May be used as glides, bumpers, hole plugs, etc.¶Head diameters and chassis thickness can be varied for a nominal engineering charge.¶May be used with nylon washers to hold flimsy materials.¶(Choose an I.D. between C and D dimensions and thickness (T) to ensure snug fit).¶NOTE: Tolerance on L dimension is ±.015.¶¶ Slot is missing.¶* Full round lock (C dim.) designed to fit flexible materials.", "grpatr": "H - Fraction|H (in)|H (mm)|T (in)|T (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|L (in)|L (mm)", "grpflg": "Y" }, { "clsnam": "PIFRRATRIV2728", "clsnbr": "030807", "catnm1": "Cords Canada Products", "catnm2": "Push-in Fasteners and Rivets", "catnm3": "Ratcheting Rivets", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_RatchetRivet-02_800X800.jpg|CordsCanada_RatchetRivet_Dims_600X600.jpg", "notes": "These nylon rivets are identical pairs with internally serrated prongs that ratchet together and provide for variable take-up. Ideal for both rigid and compressible material.¶¶Minimum order 1000¶NOTE: Two ratchet rivets are required to make one assembly.¶Assembly to fit a .281 diameter hole.", "grpatr": "Assembled Panel Thickness Range (in)|Assembled Panel Thickness Range (mm)|Head Diameter (in)|Head Diameter (mm)|Head Thickness (in)|Head Thickness (mm)", "grpflg": "Y" }, { "clsnam": "PIFRSCINWLAN2721", "clsnbr": "030808", "catnm1": "Cords Canada Products", "catnm2": "Push-in Fasteners and Rivets", "catnm3": "Screw-In Nylon Wall Anchor", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_ScrewIn_WallAnchor_600x600.jpg", "notes": "Self-drilling point cuts right into 3/8\u0022-5/8\u0022 drywall by simply screwing it in. Flush, low profile,¶phillips countersunk head to be used in combination with a self-tapping screw or screw eye.¶No pre-drilling of hole required. Deep coarse threads create strong engagement and hold.¶Replaces plastic conical anchors where more strength is required. Minimum required screw length for both #6 and #8 is 3/4\u0022.¶Available in natural nylon.", "grpatr": "Screw Size|Length - Fraction|Length (in)|Length (mm)", "grpflg": "Y" }, { "clsnam": "PIFRSHUTPIN2725", "clsnbr": "030809", "catnm1": "Cords Canada Products", "catnm2": "Push-in Fasteners and Rivets", "catnm3": "Shutter Pins", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_ShutterPin-01_500x500.jpg", "notes": "Shutter Pins¶These nylon shutter pins are utilized when constructing new plantation shutters. They support the louvers in the shutter panel, and allow the louver to rotate. The narrow end of the nylon pin is inserted into the louver. The larger end of the nylon pin is inserted into the stile or frame. A washer is molded into the pin which prevents the louver from rubbing the inside of the shutter stile allowing for smooth operation of the louvers.", "grpatr": "A Head Diameter (in)|A Head Diameter (mm)|B Pin Diameter (in)|B Pin Diameter (mm)|C Head Length (in)|C Head Length (mm)|D Overall Length (in)|D Overall Length (mm)", "grpflg": "Y" }, { "clsnam": "PIFRSNPFAST2727", "clsnbr": "030810", "catnm1": "Cords Canada Products", "catnm2": "Push-in Fasteners and Rivets", "catnm3": "Snap Fasteners", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_SnapFasteners_800x800.jpg|CordsCanada_SnapFasteners_Dim_800x600.jpg", "notes": "Two mating parts that securely connect flat panels together. Ideal for both rigid and compressible materials.¶Snap fasteners require one male rivet and one female rivet for secure panel assembly.¶¶Minimum order 1000.¶Assembly to fit a .320 diameter hole. Minimum pull out force: 40 lbs.", "grpatr": "Panel Thickness (in)|Panel Thickness (mm)|Head Diameter (Male/Female) (in)|Head Diameter (Male/Female) (mm)|Head Thickness (Male/Female) (in)|Head Thickness (Male/Female) (mm)", "grpflg": "Y" }, { "clsnam": "PIFRTPREMRIV2726", "clsnbr": "030811", "catnm1": "Cords Canada Products", "catnm2": "Push-in Fasteners and Rivets", "catnm3": "Two-Piece Removable Rivets", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Two-PieceRemovableRivets_800x800.jpg", "notes": "These two-piece nylon rivets can be removed by retracting the pin and then the body. The body incorporates a slot line with the pin so that the pin can be removed by inserting a small screwdriver or even a fingernail or other sharp object underneath the head of the pin.", "grpatr": "A Head Diameter - Fraction|A Head Diameter (in)|A Head Diameter (mm)|B Head Thickness (in)|B Head Thickness (mm)|C Prong Length - Fraction|C Prong Length (in)|C Prong Length (mm)|Hole Size (in)|Hole Size (mm)|Panel Thickness - Fraction|Panel Thickness (in)|Panel Thickness (mm)", "grpflg": "Y" }, { "clsnam": "1806", "clsnbr": "0309", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_ScrewsNutsBoltsGroup-800x600.jpg", "notes": "Large selection of Molded Nylon screws, nuts, lock nuts, and bolts. Inch and Metric sizes, also threaded rod, dowel and wing nuts", "grpatr": "", "grpflg": "N" }, { "clsnam": "1911", "clsnbr": "030901", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Acetal Moulded Dowels", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_Acetal _Dowel-800x800.jpg", "notes": "Uses inlcude dowel pins, insulating spacers, stop pins, switch actuators and keys. Also available in other plastics. Standaard colour is Natural.", "grpatr": "OD (in)|OD (mm)|Length - Fraction|Length (in)|Length (mm)", "grpflg": "Y" }, { "clsnam": "SNBMPVCHXBCS2732", "clsnbr": "030902", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Machined PVC Hex Bolts (Cap Screws)", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_HexHeadCapScrew_Bolt-PVC-800x800.jpg|CordsCanada_NylonHexBolt-CapScrew_HexHead_800x800.jpg", "notes": "As well as PVC, these are available in delrin, polypropylene, teflon and other materials in sizes from 1/4-20 to 1\u0022-8, and lengths up to 6\u0022.", "grpatr": "Size - Fraction|Size (in)|Size (mm)|Length - Fraction|Length (in)|Length (mm)", "grpflg": "Y" }, { "clsnam": "SNBMPVCHXNT2747", "clsnbr": "030903", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Machined PVC Hex Nuts", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_Hex-Nut-PVC-800x800.jpg|CordsCanada_PVCHexNuts_Dim_800x800.jpg", "notes": "Machined PVC Hex Nuts", "grpatr": "F (in)|F (mm)|D (in)|D (mm)|H (in)|H (mm)", "grpflg": "Y" }, { "clsnam": "METNYLONSCREW2640", "clsnbr": "030904", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Metric Nylon Machine Screws", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonMachineScrew_PanHead_800x800.jpg|CordsCanada_MetricScrewHeadTypes_750x500.jpg", "notes": "Metric nylon screws are anti-corrosive, non-marring, tough and lightweight. They conform to irregular surfaces and are friction, abrasion and vibration resistant, and good electrical and thermal insulators.¶¶They are anti-corrosive, non-marring, tough and lightweight.¶¶Add the following suffixes to specify head styles when ordering:¶C = cheese ¶SG = slotted grub¶F = flat ¶SH = slotted hex¶P = pan ¶ST = slotted thumb", "grpatr": "Screw Size|Approx. American Standard|Pitch|Length (mm)|Length (in)|Head Type", "grpflg": "Y" }, { "clsnam": "SNBNYCPNTL2751", "clsnbr": "030905", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Cap Nuts - Locking", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonMachineScrew_CapLockNut_800x800.jpg|CordsCanada_NylonCapNuts_Locking_Dim_800x800.jpg", "notes": "Nylon Cap Nuts - Locking", "grpatr": "F (in)|F (mm)|D (in)|D (mm)|H (in)|H (mm)", "grpflg": "Y" }, { "clsnam": "SNBNYCPNTS2750", "clsnbr": "030906", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Cap Nuts - Standard", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_Acorn-Nuit-Nylon-800x800.jpg|CordsCanada_NylonCapNuts_Standard_Dim_800x800.jpg", "notes": "Nylon Cap Nuts - Standard", "grpatr": "F (in)|F (mm)|D (in)|D (mm)|H (in)|H (mm)", "grpflg": "Y" }, { "clsnam": "SNBNYCARBLT2730", "clsnbr": "030907", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Carriage Bolts", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonCarriageBolt_800x800.jpg|CordsCanada_NylonCarriageBolts_Dim_800x800.jpg", "notes": "Nylon Carriage Bolt", "grpatr": "Length - Fraction|Length (in)|Length (mm)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)", "grpflg": "Y" }, { "clsnam": "SNBNYEXNT2756", "clsnbr": "030908", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Expansion Nuts", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonExpansionNut_SquareHead_800x800.jpg|CordsCanada_NylonExpansionNut_type1_Dim_800x800.jpg|CordsCanada_NylonExpansionNut_Type2_Dim_800x800.jpg", "notes": "Nylon Expansion Nuts", "grpatr": "Square hole Size (in)|Square hole Size (mm)|Panel Thickness (in)|Panel Thickness (mm)|Screw Size|H - Head size (in)|H - Head size (mm)|T - Head Height (in)|T - Head Height (mm)|L - Length (in)|L - Length (mm)|Head Type", "grpflg": "Y" }, { "clsnam": "SNBNYHXBLTCP2729", "clsnbr": "030909", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Hex Bolts (Cap Screws)", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Nylon-HexBoltsCapScrew_800x800.jpg|CordsCanada_NylonHexBolt-CapScrew_HexHead_800x800.jpg|CordsCanada_NylonHexBolt-CapScrew_SlottedHexHead_800x800.jpg|CordsCanada_NylonHexBolt-CapScrew_HexSocketHead_800x800.jpg|CordsCanada_NylonHexBolt-CapScrew_SocketSetHead_800x800.jpg", "notes": "Minimum order: Hex Head: 100, Slotted Hex: 500¶Hex Socket and Socket Set available at additional charge. Minimum order 1000¶* Also available in socket head and Phillips fillister.¶**Fully threaded.¶Longer lengths available.¶Thread length:¶Bolts are usually threaded as follows: (Diameter x 2) + 1/2 inch.¶¶Add the following suffixes to specify head styles when ordering:¶H = hex¶SH = slotted hex¶HS = hex socket¶SS = socket set", "grpatr": "Size - Fraction|Size (in)|Size (mm)|Length - Fraction|Length (in)|Length (mm)|Head Style", "grpflg": "Y" }, { "clsnam": "SNBNYLCKNT2755", "clsnbr": "030910", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Locknuts", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonLocknut_400x400.jpg|CordsCanada_NylonLocknuts_Dim_800x800.jpg", "notes": "Nylon Locknuts", "grpatr": "Thread Type \u0026 Size|G (in)|G (mm)|H (in)|Threads", "grpflg": "Y" }, { "clsnam": "1240", "clsnbr": "030911", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Machine Screws", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonMachineScrew_RoundHead_800x800.jpg|NylonMachineScrews_HeadTypes_HR_500x1000.jpg", "notes": "Nylon screws are anti-corrosive, non-marring, tough and lightweight. They conform to irregular surfaces and are friction, abrasion and vibration resistant, and good electrical and thermal insulators.¶¶Specify head style by adding the following suffixes when ordering:¶B = binding ¶FI = fillister¶H = hex ¶P = pan¶R = round ¶S = set¶SH = slotted hex", "grpatr": "Size - Fraction|Length - Fraction|Head Style", "grpflg": "Y" }, { "clsnam": "1241", "clsnbr": "030912", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Machine Screws - Flat and Oval Head", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonMachineScrew_Flat-OvalHead_800x800.jpg|CordsCanada_OvalFlatHeadScrews_Dim-01_500x400.jpg", "notes": "Specify head style by adding the following suffixes when ordering:¶F = flat ¶OV = oval", "grpatr": "Size - Fraction|Length (fraction)|Head Style", "grpflg": "Y" }, { "clsnam": "SNBNYNTHX2743", "clsnbr": "030913", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Nuts - Hex", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_HexNut-Nylon-800x800.jpg|CordsCanada_NylonNuts_Hex_Dim_800x800.jpg", "notes": "Nylon Hex Nuts (Single Chamfered, Washer Faced)¶Especially useful with brittle surfaces such as glass, ceramic or enamel. Their resilience allows even load distribution, particularly on irregular surfaces.", "grpatr": "F (in)|F (mm)|D (in)|D (mm)|H (in)|H (mm)", "grpflg": "Y" }, { "clsnam": "SNBNYNTLHX2744", "clsnbr": "030914", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Nuts - Locking Hex", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_Lock-Nut-Nylon-800x800.jpg|CordsCanada_NylonNuts_LockingHex_Dim_800x800.jpg", "notes": "Nylon Nuts - Locking Hex", "grpatr": "F (in)|F (mm)|D (in)|D (mm)|H (in)|H (mm)|", "grpflg": "Y" }, { "clsnam": "SNBNYNTMTHX2746", "clsnbr": "030915", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Nuts -Metric Hex", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_HexNut-Nylon-800x800.jpg|CordsCanada_MetricNylonNuts_Hex_Dim_800x800.jpg", "notes": "Nylon Nuts -Metric Hex", "grpatr": "F (mm)|F (in)|D (mm)|D (in)|H (mm)|H (in)", "grpflg": "Y" }, { "clsnam": "SNBNYNTSTJ2745", "clsnbr": "030916", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Nuts -Standard Jam", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_NylonHexNut-StandardJam.800x800.jpg|CordsCanada_NylonNuts_StandardJam_Dim_800x800.jpg", "notes": "Standard Jam", "grpatr": "F - Fraction|F (in)|F (mm)|D (in)|D (mm)|H (in)|H (mm)|", "grpflg": "Y" }, { "clsnam": "SNBNYTHNTSC2752", "clsnbr": "030917", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Thumb Nuts - Slotted Cap", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonThumbNutSlotted_800x800.jpg|CordsCanada_NylonThumbNuts_900x600.jpg", "notes": "Nylon Thumb Nuts - Slotted Cap", "grpatr": "D (in)|D (mm)|H (in)|H (mm)|S (in)|S (mm)", "grpflg": "Y" }, { "clsnam": "SNBNYTHBTT2753", "clsnbr": "030918", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Thumb Nuts - Through", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonThumbNutThrough_800x800.jpg|CordsCanada_NylonThumbNuts_Through_Dim_800x800.jpg", "notes": "Nylon Thumb Nuts - Through", "grpatr": "D (in)|D (mm)|H (in)|H (mm)|S (in)|S (mm)", "grpflg": "Y" }, { "clsnam": "SNBNYTHSCFHW2736", "clsnbr": "030919", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Thumb Screws -Flat Head Wing", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonThumbScrewFHDWing_300x300.jpg", "notes": "Nylon Thumb Screws -Flat Head Wing", "grpatr": "Size - Fraction|Size (in)|Size (mm)|Length (in)|Length (mm)|Head Type", "grpflg": "Y" }, { "clsnam": "SNBNYTHSCKN2733", "clsnbr": "030920", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Thumb Screws -Knurled", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_THumbScrews_Knurled-600x600.jpg", "notes": "Thumb screws offer easy assembly and adjustment and will not cut fingers. Vibration-resistant, they stay in place and are knurled for positive grip. These can be used as an economical alternative for knobs.", "grpatr": "Size - Fraction|Size (in)|Size (mm)|Length - Fraction|Length (in)|Length (mm)|D (in)|D (mm)", "grpflg": "Y" }, { "clsnam": "SNBNYTHSCOH2735", "clsnbr": "030921", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Thumb Screws -Oval Head", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonThumbScrew_800x800.jpg", "notes": "Nylon Thumb Screws -Oval Head", "grpatr": "Size - Fraction|Size (in)|Size (mm)|Length (in)|Length (mm)|Head Type", "grpflg": "Y" }, { "clsnam": "SNBNYTHSCSLT2734", "clsnbr": "030922", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Thumb Screws -Slotted", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_ThumbScrews_Slotted-600x600.jpg", "notes": "Nylon Thumb Screws -Slotted", "grpatr": "Size - Fraction|Size (in)|Size (mm)|Length - Fraction|Length (in)|Length (mm)|D (in)|D (mm)|Head Type", "grpflg": "Y" }, { "clsnam": "SNBNYUNTHRD2742", "clsnbr": "030923", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Unthreaded Rod", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Nylon-NonThreadedRod_800x800.jpg", "notes": "Nylon Unthreaded Rod¶¶Minimum order 8 feet¶Sold in 8-foot lengths only", "grpatr": "Size - Fraction|Size (in)|Size (mm)|Length", "grpflg": "Y" }, { "clsnam": "SNBNYWGNTL2749", "clsnbr": "030924", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Wing Nuts - Locking", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonWingNutLocking_800x800.jpg|CordsCanada_NylonWingNuts_Locking_Dim_800x800.jpg", "notes": "Nylon Wing Nuts - Locking", "grpatr": "D (in)|D (mm)|H (in)|H (mm)|W (in)|W (mm)", "grpflg": "Y" }, { "clsnam": "SNBNYWGNTS2748", "clsnbr": "030925", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Nylon Wing Nuts - Standard", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonWingNutStandard_800x800.jpg|CordsCanada_NylonWingNuts_Standard_Dim_800x800.jpg", "notes": "Nylon Wing Nuts - Standard", "grpatr": "D (in)|D (mm)|H (in)|H (mm)|W (in)|W (mm)", "grpflg": "Y" }, { "clsnam": "SNBTHRODFRP2739", "clsnbr": "030926", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Threaded Rod - FRP", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_FRPThreadedRod_800x800.jpg", "notes": "Threaded Rod - FRP (Fibreglass-Reinforced Vinyl Ester)¶Use with corresponding nuts for longer length or non-standard bolts. Can be bent with heat to¶form U-bolts or other shapes.¶¶¶Minimum order 4 feet.¶Sold in 4-foot lengths only.¶Glass-filled polyphenyl sulphide nuts are available.", "grpatr": "Size - Fraction|Size (in)|Size (mm)|Length", "grpflg": "Y" }, { "clsnam": "SNBTHRODNY2737", "clsnbr": "030927", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Threaded Rod - Nylon", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonThreadedRod_800x800.jpg", "notes": "Threaded Rod - Nylon¶Use with corresponding nuts for longer length or non-standard bolts. Can be bent with heat to¶form U-bolts or other shapes.¶¶¶Minimum order 4 feet.¶Sold in 4-foot lengths only.", "grpatr": "Size - Fraction|Size (in)|Size (mm)|Length", "grpflg": "Y" }, { "clsnam": "SNBTHRODPVC2738", "clsnbr": "030928", "catnm1": "Cords Canada Products", "catnm2": "Screws, Nuts and Bolts", "catnm3": "Threaded Rod -PVC", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_PVCThreadedRod_800x800.jpg", "notes": "Threaded Rod -PVC¶Use with corresponding nuts for longer length or non-standard bolts. Can be bent with heat to¶form U-bolts or other shapes.¶¶¶Minimum order 4 feet.¶Sold in 4-foot lengths only.", "grpatr": "Size - Fraction|Size (in)|Size (mm)|Length", "grpflg": "Y" }, { "clsnam": "1813", "clsnbr": "0310", "catnm1": "Cords Canada Products", "catnm2": "Spacers and Supports", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_SpacersSupportsGroup-800x600.jpg", "notes": "Nylon spacers, standoffs and supports, in various cross sectional shapes and lengths. Frequently used in electrical and electroinc applications.", "grpatr": "", "grpflg": "N" }, { "clsnam": "SSNYHEXSP2759", "clsnbr": "031001", "catnm1": "Cords Canada Products", "catnm2": "Spacers and Supports", "catnm3": "Nylon Hex Spacers", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_HexSpacer-Nylon-800x800.jpg|CordsCanada_NylonHexSpacer_Diim_800x600.jpg", "notes": "Nylon Hex Spacers", "grpatr": "ID (in)|ID (mm)|L - Fraction|L (in)|L (mm)|Self-Tapping Screw", "grpflg": "Y" }, { "clsnam": "SSNNYMFTHSO2763", "clsnbr": "031002", "catnm1": "Cords Canada Products", "catnm2": "Spacers and Supports", "catnm3": "Nylon Male-Female Threaded Standoffs", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_RenderScene_Nylon-Male-Female_Threaded_Standoff.800x800.jpg|CordsCanada_MaleFemale_Standoff_Dim_800x600.jpg", "notes": "Nylon Male-Female Threaded Standoffs", "grpatr": "Thread|Length - Fraction|Length (in)|Length (mm)|F - Fraction|F (in)|F (mm)|M -Fraction|M (in)|M (mm)", "grpflg": "Y" }, { "clsnam": "SSNYPCBSS2762", "clsnbr": "031003", "catnm1": "Cords Canada Products", "catnm2": "Spacers and Supports", "catnm3": "Nylon PCB Supports/Spacers", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonPCBSupports_800x800.jpg|CordsCanada_NylonPCBSupports_Dim_800x800.jpg", "notes": "Nylon PCB Supports/Spacers", "grpatr": "Barb Type|A Spacing - Fraction|B Overall Length - Fraction", "grpflg": "Y" }, { "clsnam": "SSNYRNSPSP2758", "clsnbr": "031004", "catnm1": "Cords Canada Products", "catnm2": "Spacers and Supports", "catnm3": "Nylon Round Spacers - Special", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_Hollow-Spacer-Nylon-800x800.jpg|CordsCanada_NylonRoundSpacer_Dim_800x500.jpg", "notes": "Nylon Round Spacers - Special", "grpatr": "Length (in)|Length (mm)|ID (in)|ID (mm)|OD (in)|OD (mm)", "grpflg": "Y" }, { "clsnam": "SSNYRNSPSTD2757", "clsnbr": "031005", "catnm1": "Cords Canada Products", "catnm2": "Spacers and Supports", "catnm3": "Nylon Round Spacers - Standard", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_Hollow-Spacer-Nylon-800x800.jpg|CordsCanada_NylonRoundSpacer_Dim_800x500.jpg", "notes": "Nylon Round Spacers - Standard", "grpatr": "Screw Size|Outside Dia. (in)|Outside Dia. (mm)|Inside Dia. (in)|Inside Dia. (mm)|Length (in)|Length (mm)", "grpflg": "Y" }, { "clsnam": "SSTPNYHXSP2760", "clsnbr": "031006", "catnm1": "Cords Canada Products", "catnm2": "Spacers and Supports", "catnm3": "Tapped Nylon Hex Spacers", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_HexSpacer-Threaded-Nylon-800x800.jpg|CordsCanada_NylonTappedHexSpacer_Dim_800x600.jpg", "notes": "Tapped Nylon Hex Spacers", "grpatr": "L - Fraction|L (in)|L (mm)|Screw", "grpflg": "Y" }, { "clsnam": "SSTPNYRNSP2761", "clsnbr": "031007", "catnm1": "Cords Canada Products", "catnm2": "Spacers and Supports", "catnm3": "Tapped Nylon Round Spacers", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_RoundSpacer-Threaded-Nylon-800x800.jpg|CordsCanada_NylonTappedRoundSpacer_Dim_800x600.jpg", "notes": "Tapped Nylon Round Spacers", "grpatr": "L - Fraction|L (in)|L (mm)|OD - Fraction|OD (in)|OD (mm)|Screw", "grpflg": "Y" }, { "clsnam": "1811", "clsnbr": "0311", "catnm1": "Cords Canada Products", "catnm2": "Strain Reliefs", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_StrainRelief_Group_800x660.jpg", "notes": "A range of strain reliefs for cable and wire retention, including: Straight-thru, Bell-Mouth, Pigtail, Right Angle and European styles.¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "SRBMFFCAB2778", "clsnbr": "031101", "catnm1": "Cords Canada Products", "catnm2": "Strain Reliefs", "catnm3": "Bell-Mouth - For Flat cables", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Bell-Mouth_FlatCable_450x450.jpg|CordsCanada_BlMth_StrnRlf_900x500.jpg", "notes": "Bell-Mouth - For Flat cables¶These nylon 6/6 UL and CSA approved parts protect the lifeline of your electrical/electronic products by absorbing forces of pull, push, twist and flex. Securely anchors, insulates and protects cables at panel entry points. Flared trumpet exit eases the cable into a lazy bend, prevents sharp bending and assures longer cable and product life.", "grpatr": "A Mounting Hole Dia. 1[A Mounting Hole Dia.]|A Mounting Hole Dia. 2[A Mounting Hole Dia.]|A Mounting Hole Dia. 3[A Mounting Hole Dia.]|UL Wire Designation 1[UL Wire Designation]|UL Wire Designation 2[UL Wire Designation]|UL Wire Designation 3[UL Wire Designation]|UL Wire Designation 4[UL Wire Designation]|AWG Conductors 1[AWG Conductors]|AWG Conductors 2[AWG Conductors]|AWG Conductors 3[AWG Conductors]|AWG Conductors 4[AWG Conductors]", "grpflg": "Y" }, { "clsnam": "SRBMFRCAB2779", "clsnbr": "031102", "catnm1": "Cords Canada Products", "catnm2": "Strain Reliefs", "catnm3": "Bell-Mouth - For Round cables", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Bell-Mouth_RoundCable_450x450.jpg|CordsCanada_BlMth_StrnRlf_900x500.jpg", "notes": "Bell-Mouth - For Round cables¶These nylon 6/6 UL and CSA approved parts protect the lifeline of your electrical/electronic products by absorbing forces of pull, push, twist and flex. Securely anchors, insulates and protects cables at panel entry points. Flared trumpet exit eases the cable into a lazy bend, prevents sharp bending and assures longer cable and product life.", "grpatr": "A Mounting Hole Dia. 1[A Mounting Hole Dia.]|A Mounting Hole Dia. 2[A Mounting Hole Dia.]|A Mounting Hole Dia. 3[A Mounting Hole Dia.]|UL Wire Designation 1[UL Wire Designation]|UL Wire Designation 2[UL Wire Designation]|UL Wire Designation 3[UL Wire Designation]|UL Wire Designation 4[UL Wire Designation]|AWG/ Conductors 1[AWG Conductors]|AWG/ Conductors 2[AWG Conductors]|AWG/ Conductors 3[AWG Conductors]|AWG/ Conductors 4[AWG Conductors]", "grpflg": "Y" }, { "clsnam": "SRGMSR2818", "clsnbr": "031103", "catnm1": "Cords Canada Products", "catnm2": "Strain Reliefs", "catnm3": "Gripmaster Strain Reliefs", "catnm4": "", "catnm5": "", "imgnme": "Cords_RenderScene_GripMaster-Group_800x640.jpg|CordsCanada_GripMaster_DimDraw_700x250.jpg", "notes": "Provides reliable terminal protection for all types of cord-equipped appliances and instruments where space is limited and high volume production is required.¶The Gripmaster has a fibre insulating material retained in a cold-rolled steel frame. When applied, it forms a compact, rugged ring that firmly grips the cord.", "grpatr": "Approx. Wire Diameter (in)|Approx. Wire Diameter (mm)|A (in)|A (mm)|B (in)|B (mm)", "grpflg": "Y" }, { "clsnam": "SRPTFFCAB2776", "clsnbr": "031104", "catnm1": "Cords Canada Products", "catnm2": "Strain Reliefs", "catnm3": "Pigtail - For Flat Cables", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_PigTail-01_300x300.jpg|CordsCanada_PigTail_DimDraw_800x800.jpg", "notes": "These nylon 6/6 UL and CSA approved parts protect the lifeline of your electrical/electronic products¶by absorbing forces of pull, push, twist and flex. Add reliability, longevity and safety. Will pass¶CSA\u0027s 50,000 cycle \u0027vacuum cleaner\u0027 test. Securely anchors, insulates and protects cables at panel entry points.¶Integral nylon spring eases the cable into a lazy bend and prevents sharp bending; assures longest¶cable and product life. They are not recommended for applications where the power supply cord is¶subject to whipping or \u0027jump rope\u0027 type motion.", "grpatr": "A Mounting Hole Dia. 1[A Mounting Hole Dia.]|A Mounting Hole Dia. 2[A Mounting Hole Dia.]|A Mounting Hole Dia. 3[A Mounting Hole Dia.]|UL Wire Designation 1[UL Wire Designation]|UL Wire Designation 2[UL Wire Designation]|UL Wire Designation 3[UL Wire Designation]|UL Wire Designation 4[UL Wire Designation]|AWG Conductors 1[AWG Conductors]|AWG Conductors 2[AWG Conductors]|AWG Conductors 3[AWG Conductors]|AWG Conductors 4[AWG Conductors]", "grpflg": "Y" }, { "clsnam": "SRPTFRCAB2777", "clsnbr": "031105", "catnm1": "Cords Canada Products", "catnm2": "Strain Reliefs", "catnm3": "Pigtail - For Round Cables", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_PigTail-01_300x300.jpg|CordsCanada_PigTail_DimDraw_800x800.jpg", "notes": "These nylon 6/6 UL and CSA approved parts protect the lifeline of your electrical/electronic products¶by absorbing forces of pull, push, twist and flex. Add reliability, longevity and safety. Will pass¶CSA\u0027s 50,000 cycle \u0027vacuum cleaner\u0027 test. Securely anchors, insulates and protects cables at panel entry points.¶Integral nylon spring eases the cable into a lazy bend and prevents sharp bending; assures longest¶cable and product life. They are not recommended for applications where the power supply cord is¶subject to whipping or \u0027jump rope\u0027 type motion.", "grpatr": "A Mounting Hole Dia. 1[A Mounting Hole Dia.]|A Mounting Hole Dia. 2[A Mounting Hole Dia.]|A Mounting Hole Dia. 3[A Mounting Hole Dia.]|UL Wire Designation 1[UL Wire Designation]|UL Wire Designation 2[UL Wire Designation]|UL Wire Designation 3[UL Wire Designation]|UL Wire Designation 4[UL Wire Designation]|AWG Conductors 1[AWG Conductors]|AWG Conductors 2[AWG Conductors]|AWG Conductors 3[AWG Conductors]|AWG Conductors 4[AWG Conductors]", "grpflg": "Y" }, { "clsnam": "SRPWRSCORD2769", "clsnbr": "031106", "catnm1": "Cords Canada Products", "catnm2": "Strain Reliefs", "catnm3": "Power Supply Cords", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_PowerSupply_01_900x600.jpg", "notes": "Typical applications:¶Jacketed cords: SVT-type is used for light duty appliances, vacuum cleaners, business machines. SJT-type is similar to SVT, but has heavier insulation, and is used for portable drills, portable lamps, appliances, refrigerators and washers.¶Parallel cords: HPN-type is a heater cord and is used for coffee makers, toasters, irons, portable heaters.¶Descriptions:¶SVT \u0026 SJT cords: three-prong male plug on one end, other end outer jacket removed 2\u0022 and stripped 1/2\u0022. HPN cords: three-prong male plug one end, other end split 2\u0022 and stripped 1/2\u0022.¶¶Colour: Black only.", "grpatr": "Type|Description|Colour", "grpflg": "Y" }, { "clsnam": "SRRAFFCAB2774", "clsnbr": "031107", "catnm1": "Cords Canada Products", "catnm2": "Strain Reliefs", "catnm3": "Right Angle - For Flat Cables", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_RtAngl_StrnRlf_Flat_Image_500x400.jpg|CordsCanada_RtAngl_StrnRlf_Flat_1000x400.jpg", "notes": "Right Angle - For Flat Cables¶Provides the same protection for your power supply cable as the straight-thru type and exits the¶cable flush against the chassis, saving space and directing the cable parallel to the panel. Overcomes space limitations and acts as a back or bottom¶bumper.¶Moulded of UL and CSA approved nylon 6/6.", "grpatr": "A Mounting Hole Dia. 1[A Mounting Hole Dia.]|A Mounting Hole Dia. 2[A Mounting Hole Dia.]|A Mounting Hole Dia. 3[A Mounting Hole Dia.]|UL Wire Designation 1[UL Wire Designation]|UL Wire Designation 2[UL Wire Designation]|UL Wire Designation 3[UL Wire Designation]|UL Wire Designation 4[UL Wire Designation]|AWG/ Conductors 1[AWG Conductors]|AWG/ Conductors 2[AWG Conductors]|AWG/ Conductors 3[AWG Conductors]|AWG/ Conductors 4[AWG Conductors]", "grpflg": "Y" }, { "clsnam": "SRRAFRCAB2775", "clsnbr": "031108", "catnm1": "Cords Canada Products", "catnm2": "Strain Reliefs", "catnm3": "Right Angle - For Round Cables", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_RtAngl_StrnRlf_Round_Image_500x400.jpg|CordsCanada_RtAngl_StrnRlf_Round_1000x600.jpg", "notes": "Right Angle - For Round Cables¶Provides the same protection for your power supply cable as the straight-thru type and exits the cable¶flush against the chassis, saving space and directing the cable parallel to the panel. Overcomes space limitations and acts as a back or bottom bumper.¶Moulded of UL and CSA approved nylon 6/6.", "grpatr": "A Mounting Hole Dia. 1[A Mounting Hole Dia.]|A Mounting Hole Dia. 2[A Mounting Hole Dia.]|A Mounting Hole Dia. 3[A Mounting Hole Dia.]|UL Wire Designation 1[UL Wire Designation]|UL Wire Designation 2[UL Wire Designation]|UL Wire Designation 3[UL Wire Designation]|UL Wire Designation 4[UL Wire Designation]|AWG/ Conductors 1[AWG Conductors]|AWG/ Conductors 2[AWG Conductors]|AWG/ Conductors 3[AWG Conductors]|AWG/ Conductors 4[AWG Conductors]", "grpflg": "Y" }, { "clsnam": "SRSTFFCAB2770", "clsnbr": "031109", "catnm1": "Cords Canada Products", "catnm2": "Strain Reliefs", "catnm3": "Straight Thru - For Flat Cables", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Lockit_ST_FC_500x500.jpg|CordsCanada_StrtThruStrnRlf-Flat_900x600.jpg", "notes": "Straight Thru - For Flat Cables¶The original strain relief-the first and still the best. Moulded of nylon 6/6 and UL and CSA certified, these strain reliefs protect the lifeline of your electronic/electrical products by absorbing the forces of push, pull and twist that may be exerted on the flexible power cord.¶They securely anchor, insulate and protect cables at panel entry points.", "grpatr": "A Mounting Hole Dia. 1[A Mounting Hole Dia.]|A Mounting Hole Dia. 2[A Mounting Hole Dia.]|A Mounting Hole Dia. 3[A Mounting Hole Dia.]|UL Wire Designation 1[UL Wire Designation]|UL Wire Designation 2[UL Wire Designation]|UL Wire Designation 3[UL Wire Designation]|UL Wire Designation 4[UL Wire Designation]|AWG/ Conductors 1[AWG Conductors]|AWG/ Conductors 2[AWG Conductors]|AWG/ Conductors 3[AWG Conductors]|AWG/ Conductors 4[AWG Conductors]", "grpflg": "Y" }, { "clsnam": "SRSTFFCABFP2771", "clsnbr": "031110", "catnm1": "Cords Canada Products", "catnm2": "Strain Reliefs", "catnm3": "Straight Thru - For Flat Cables with Flex Protect", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Lockit_ST_FC_500x500.jpg|CordsCanada_StrtThruStrnRlf-Flat_900x600.jpg", "notes": "Straight Thru - For Flat Cables with Flex Protect¶The original strain relief-the first and still the best. Moulded of nylon 6/6 and UL and CSA certified, these strain reliefs protect the lifeline of your electronic/electrical products by absorbing the forces of push, pull and twist that may be exerted on the flexible power cord.¶They securely anchor, insulate and protect cables at panel entry points.", "grpatr": "A Mounting Hole Dia. 1[A Mounting Hole Dia.]|A Mounting Hole Dia. 2[A Mounting Hole Dia.]|A Mounting Hole Dia. 3[A Mounting Hole Dia.]|UL Wire Designation 1[UL Wire Designation]|UL Wire Designation 2[UL Wire Designation]|UL Wire Designation 3[UL Wire Designation]|UL Wire Designation 4[UL Wire Designation]|AWG/ Conductors 1[AWG Conductors]|AWG/ Conductors 2[AWG Conductors]|AWG/ Conductors 3[AWG Conductors]|AWG/ Conductors 4[AWG Conductors]", "grpflg": "Y" }, { "clsnam": "SRSTFRCAB2772", "clsnbr": "031111", "catnm1": "Cords Canada Products", "catnm2": "Strain Reliefs", "catnm3": "Straight Thru - For Round Cables", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Lockit_StrainRelief_500x500.jpg|CordsCanada_StrtThruStrnRlf_RND_900x600.jpg|CordsCanada_StrtThruStrnRlf_RND-SR-7KR-2_900x900.jpg", "notes": "Straight Thru - For Round Cables¶The original strain relief-the first and still the best. Moulded of nylon 6/6 and UL and CSA certified, these strain reliefs protect the lifeline of your electronic/electrical products by absorbing the forces of push, pull and twist that may be exerted on the flexible power cord.¶They securely anchor, insulate and protect cables at panel entry points.", "grpatr": "A Mounting Hole Dia. 1[A Mounting Hole Dia.]|A Mounting Hole Dia. 2[A Mounting Hole Dia.]|A Mounting Hole Dia. 3[A Mounting Hole Dia.]|UL Wire Designation 1[UL Wire Designation]|UL Wire Designation 2[UL Wire Designation]|UL Wire Designation 3[UL Wire Designation]|UL Wire Designation 4[UL Wire Designation]|AWG/ Conductors 1[AWG Conductors]|AWG/ Conductors 2[AWG Conductors]|AWG/ Conductors 3[AWG Conductors]|AWG/ Conductors 4[AWG Conductors]", "grpflg": "Y" }, { "clsnam": "1459", "clsnbr": "0312", "catnm1": "Cords Canada Products", "catnm2": "Ties", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Ties_Group_1000x700.jpg", "notes": "The widest line of versatile self-locking nylon cable ties for standard and heavy duty, regular and mounting applications. ValueLine ties securely bundle cables, wires and hoses from 1/16\u0022 to 15\u0022 diameters.", "grpatr": "", "grpflg": "N" }, { "clsnam": "TBEADTIE2785", "clsnbr": "031201", "catnm1": "Cords Canada Products", "catnm2": "Ties", "catnm3": "Beaded Ties", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_BeadedTies-01_500x500.jpg|CordsCanada_BeadedTies_Bundle-01_500x500.jpg|CordsCanada_Beaded-Ties_DimDraw_700x400.jpg", "notes": "Beaded Ties¶Releasable and reuseable ties for easy binding, closing, bagging, holding and tying. Available in two materials: polyethylene for high flexibility and moderate strength, and nylon for less flexibility and more strength with high resistance to temperature and chemicals. Polyethylene ties are stocked in red and available in natural, black, blue, and yellow. Nylon ties are stocked in natural and also¶available in black. Please specify colour when ordering. An adhesive backed mounting platform (Part No. MPBTA) is also available. Moulded of natural nylon, it may also be screw mounted.", "grpatr": "Overall Length - Fraction|Max. Bundle Diameter - Fraction|Tensile Strength", "grpflg": "Y" }, { "clsnam": "TMNTPLATF2786", "clsnbr": "031202", "catnm1": "Cords Canada Products", "catnm2": "Ties", "catnm3": "Mounting Platforms", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_MountingPlatform_500x500.jpg|CordsCanada_MntPlat_DimDraw_900x500.jpg", "notes": "Mounting Platforms", "grpatr": "Mounting Style|Screw Size|Base Size - Fraction", "grpflg": "Y" }, { "clsnam": "TNYCTRSL2783", "clsnbr": "031203", "catnm1": "Cords Canada Products", "catnm2": "Ties", "catnm3": "Nylon Cable Ties - Releasable", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_ReleaseableTies_400X400.jpg|CordsCanada_TiesReleasable_DimDraw_700X400.jpg", "notes": "Nylon Cable Ties - Releasable", "grpatr": "Overall Length - Fraction|Max Bundle Diameter - Fraction|Tensile Strength", "grpflg": "Y" }, { "clsnam": "TNYCTVLREG2781", "clsnbr": "031204", "catnm1": "Cords Canada Products", "catnm2": "Ties", "catnm3": "Nylon Cable Ties - Value Line - Regular", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_CableTies-ValueLine_500X500.jpg|CordsCanada_CableTies-Value_DimDraw_600X400.jpg", "notes": "Nylon Cable Ties - Value Line - Regular¶The widest line of versatile self-locking nylon cable ties for standard and heavy duty, regular and mounting applications. Value-Line ties securely bundle cables, wires and hoses from 1/16\u0022 to 15\u0022 diameters. They assemble easily by hand, or you may wish to tighten and trim them with our tensioning¶tools (see page 163). These non-releasable nylon cable ties are chemically resistant to salt water, weak acids, alcohol, grease, oil, gasoline and common solvents and they are fungus inert. Black ultraviolet resistant material for outdoor use is also available. All our ties and installation tools are compatible with all other manufacturers\u0027 standard ties and tools.", "grpatr": "Approx. Length - Fraction|Max Bundle Dia - Fraction|W Width (in)|W Width (mm)|T Thickness (in)|T Thickness (mm)|Min. Tens. Strength (lbs)|Min. Bundle Dia (in)", "grpflg": "Y" }, { "clsnam": "TNYCTVLSCMT2782", "clsnbr": "031205", "catnm1": "Cords Canada Products", "catnm2": "Ties", "catnm3": "Nylon Cable Ties - Value Line - Screw Mountable", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_CableTies-ScrewMount_500X500.jpg|CordsCanada_TiesScrewMount_DimDraw_400X300.jpg", "notes": "Nylon Cable Ties - Value Line - Screw Mountable", "grpatr": "Approx. Length - Fraction|Max Bundle Dia. - Fraction|Minimun Tensile Strength|Suggested Mounting Screw Size", "grpflg": "Y" }, { "clsnam": "TTWLCKTIE2787", "clsnbr": "031206", "catnm1": "Cords Canada Products", "catnm2": "Ties", "catnm3": "Twist Lock Ties", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_TwistLockTies_400x400.jpg|CordsCanada_TwistLockTies_DimDraw_800x500.jpg", "notes": "Twist Lock Ties¶Purse action bundling ties offer a fast, economical way to securely position and hold wire, cable or tubing. A single twist of the finger locks bundle together; another twist opens lock to add or remove wires. The reusable Twist Lock is moulded of tough, resilient Nylon 6/6 (UL 94V2). The following standard sizes are available from stock in natural nylon. Dyed colours can be furnished for an additional charge. Other sizes can be tooled on request.", "grpatr": "Description|H (in)|H (mm)|Dia. Range A (in)|Dia. Range A (mm)", "grpflg": "Y" }, { "clsnam": "1461", "clsnbr": "0313", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_TubesFittings_Group_1000x800.jpg", "notes": "Non-metallic selection of tubes and various styles of fittings. No corrosion, Lightweight, Can often be used with fluids that attack metals.", "grpatr": "", "grpflg": "N" }, { "clsnam": "THFPTHF2788", "clsnbr": "031301", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Adapters - Male", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Nylon_Adapters-Male_600x600.jpg", "notes": "Adapters Male: Suggested advantages:¶· No corrosion¶· Lightweight¶· Can often be used with fluids that attack metals¶· Low cost¶· Do not cut fingers¶· Electrically non-conductive¶· No galvanic reaction with metals¶· Made of materials listed by FDA.¶Other fittings not listed here are available. Can be run in other materials (eg. nylon 6-6HS, polypropylene) for a minimum of 10,000.¶¶NOTES:¶MPT- Male taper pipe thread¶GHT- Garden hose thread¶Temperature Ratings:¶HDPE: -55° to +90°C¶Nylon: -40° to +100°C", "grpatr": "MPT|Tube ID - Fraction|Material", "grpflg": "Y" }, { "clsnam": "THFCONBHMEN2792", "clsnbr": "031302", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Connectors - Barbed Hose Menders", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Nylon_BarbedHoseMender_600x600.jpg", "notes": "Connectors - Barbed Hose Menders", "grpatr": "Hose ID 1 - Fraction|Hose ID 2- Fraction|Material|Colour", "grpflg": "Y" }, { "clsnam": "THFCONRED2793", "clsnbr": "031303", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Connectors - Reducing", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Nylon_ConnectorReducerBarbed_600x600.jpg", "notes": "Connectors - Reducing", "grpatr": "Tube ID 1 - Fraction|Tube ID 2 - Fraction|Material|Colour", "grpflg": "Y" }, { "clsnam": "THFELBMALE2816", "clsnbr": "031304", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Elbows - Male", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Nylon_Elbow-Male-MPT-Barbed_800x800.jpg", "notes": "Elbows - Male", "grpatr": "MPT|Tube ID - Fraction|Material|Colour", "grpflg": "Y" }, { "clsnam": "THFELBBARB2789", "clsnbr": "031305", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Elbows Barbed", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Nylon_Elbow-Male-Barbed_800x800.jpg", "notes": "Elbows Barbed", "grpatr": "Tube ID - Fraction|Tube ID (in)|Tube ID (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "THFMBASTR2796", "clsnbr": "031306", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Miniature Barbed Adapters - Straight", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_BarbedAdapterStraight_800x800.jpg", "notes": "Miniature Barbed Adapters - Straight¶The sharp barb makes a leak-proof seal. Just push on polyurethane, PE, PVC or other soft tubing with end cut straight. (Withstands 75-125 psi depending on tubing.) Clamp may not be required for low pressure applications.", "grpatr": "Tube ID - Fraction|Thread|Material|Colour", "grpflg": "Y" }, { "clsnam": "THFMBAELBO2797", "clsnbr": "031307", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Miniature Barbed Adapters -Elbow", "catnm4": "", "catnm5": "", "imgnme": "Cords_Min_Barbed-Adapter-Elbow_600x600-3.jpg", "notes": "Miniature Barbed Adapters -Elbow", "grpatr": "Tube ID - Fraction|Tube ID (in)|Tube ID (mm)|Thread|Material", "grpflg": "Y" }, { "clsnam": "THFBCRED2806", "clsnbr": "031308", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Miniature Barbed Connectors - Reducing", "catnm4": "", "catnm5": "", "imgnme": "Cords_Min_Connectors_Reducing_Barbed_600x600.jpg", "notes": "Miniature Barbed Connectors - Reducing", "grpatr": "Tube ID - Fraction|Tube ID (in)|Tube ID (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "THFMCONBRB2802", "clsnbr": "031309", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Miniature Connectors - Barbed", "catnm4": "", "catnm5": "", "imgnme": "Cords_Min_Connectors_Barbed_600x600-1.jpg", "notes": "Miniature Connectors - Barbed", "grpatr": "Tube ID - Fraction|Tube ID (in)|Tube ID (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "THFMINELBBR2798", "clsnbr": "031310", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Miniature Elbows - Barbed", "catnm4": "", "catnm5": "", "imgnme": "Cords_Min_Barbed-Elbow_600x600-1.jpg", "notes": "Miniature Elbows - Barbed", "grpatr": "Tube ID - Fraction|Tube ID (in)|Tube ID (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "THFMLCKSL2805", "clsnbr": "031311", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Miniature Locking Sleeves", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_NylonMinatureLockingSleeve_800x800.jpg", "notes": "Locking sleeves enable barbed fittings to be used at up to 100% of the rated burst pressure of the flexible plastic tubing. To use, simply slide appropriate sleeve over suggested OD tubing, insert¶miniature barbed fitting into tubing, slide sleeve back over barb. Soft tubing locks onto the self-sealing barb.", "grpatr": "Tube OD (in)|Tube OD (mm)|SD (in)|SD (mm)|T (in)|T (mm)|ID (in)|ID (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "THFMINNIP2807", "clsnbr": "031312", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Miniature Nipple", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Nipples_600x600.jpg", "notes": "Miniature Nipple", "grpatr": "Thread|Material|Colour", "grpflg": "Y" }, { "clsnam": "THFMTREEADP2799", "clsnbr": "031313", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Miniature Tees - Adapter", "catnm4": "", "catnm5": "", "imgnme": "Cords_Min_Connectors_Tee-Adapter_600x600.jpg", "notes": "Miniature Tees - Adapter", "grpatr": "Tube ID - Fraction|Tube ID (in)|Tube ID (mm)|Thread|Material|Colour", "grpflg": "Y" }, { "clsnam": "THFMTREBRB2801", "clsnbr": "031314", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Miniature Tees - Barbed", "catnm4": "", "catnm5": "", "imgnme": "Cords_Min_Connectors_Tee-Barbed_800x800.jpg", "notes": "Miniature Tees - Barbed", "grpatr": "Tube ID - Fraction|Tube ID (in)|Tube ID (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "THFMTRERUN2800", "clsnbr": "031315", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Miniature Tees - Run", "catnm4": "", "catnm5": "", "imgnme": "Cords_Min_Connectors_Tee-Run_800x800.jpg", "notes": "Miniature Tees - Run", "grpatr": "Tube ID - Fraction|Thread|Material|Colour", "grpflg": "Y" }, { "clsnam": "THFMTHRED2803", "clsnbr": "031316", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Miniature Thread Reducers", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Nylon_ThreadReducer-MPT-UNC_600x600.jpg", "notes": "Miniature Thread Reducers", "grpatr": "Thread|Material|Colour", "grpflg": "Y" }, { "clsnam": "THFNYHXPNUT2795", "clsnbr": "031317", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Nylon Hex Pipe Nuts", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_HexNut-Nylon-800x800.jpg", "notes": "Nylon Hex Pipe Nuts", "grpatr": "D (in)|D (mm)|F (in)|F (mm)|H (in)|H (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "THFSADPNUT2791", "clsnbr": "031318", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Swivel Adapters and Nuts", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Nylon_Hose-Barbed-Swivel-Nuts_800x800.jpg|CordsCanada_Nylon_SwivelAdapterNuts_400x400.jpg", "notes": "Swivel Adapters¶(See Swivel Nuts for complementary nut)", "grpatr": "Type|Hose ID - Fraction|Hose ID (in)|Hose ID (mm)|Fits nut size|Material", "grpflg": "Y" }, { "clsnam": "THFTEEBARB2794", "clsnbr": "031319", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Tees - Barbed", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Nylon_Tee-Adapters-Male_Barbed_800x800.jpg", "notes": "Tees - Barbed", "grpatr": "Leg Hose ID - Fraction|Tee Hose ID - Fraction|Material|Colour", "grpflg": "Y" }, { "clsnam": "THFTEEADPT2790", "clsnbr": "031320", "catnm1": "Cords Canada Products", "catnm2": "Tube and Hose Fittings", "catnm3": "Tees Adapter", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Nylon_Tee-Adapters-Male_MPT-Barbed_800x800.jpg", "notes": "Tees Adapter", "grpatr": "MPT|Hose ID - Fraction|Hose ID (in)|Hose ID (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "1464", "clsnbr": "0314", "catnm1": "Cords Canada Products", "catnm2": "Washers", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_Washer-Group-01_500x500.jpg", "notes": "Non-metallic washers in Nylon, PVC, Teflon, Acetal, Fibre, designed for a range of applications and environments. Styles include Flat washers, and Finishing washers.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1933", "clsnbr": "031401", "catnm1": "Cords Canada Products", "catnm2": "Washers", "catnm3": "Black Fibre Flat Washers", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_RenderScene_Nylon-BlackFibre_Washer-01_500x500.jpg|Flat_Washer_Dimensional_750x600.jpg", "notes": "Non-metallic Black Vulcanized Fibre Flat Washers.¶¶Tolerances all dimensions: +/- .005", "grpatr": "I.D. (in)|I.D. (mm)|O.D. (in)|O.D. (mm)|T (in)|T (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "1929", "clsnbr": "031402", "catnm1": "Cords Canada Products", "catnm2": "Washers", "catnm3": "Black Neoprene Flat Washers", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Black-Neoprene-Flat-Washer_500x500.jpg|Flat_Washer_Dimensional_750x600.jpg", "notes": "Non-metallic Black Neoprene Flat Washers.¶¶Tolerances: ID and OD ± .010, T ± 10%", "grpatr": "I.D. (in)|I.D. (mm)|O.D. (in)|O.D. (mm)|T (in)|T (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "NYMETRICFW2662", "clsnbr": "031403", "catnm1": "Cords Canada Products", "catnm2": "Washers", "catnm3": "Metric Nylon Flat Washers", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_Washer-Nylon-White_500x500.jpg|Flat_Washer_Dimensional_750x600.jpg", "notes": "Non-metallic metric flat washers in Nylon. These washers are made to be used with standard screw sizes. They come in the four most popular thicknesses, from 0.8mm up to 2.5mm. If one of these dimensions is not quite what you need, then check to see our section on special nylon flat washers.¶¶Tolerances: O.D. +/- , I.D. +/- , T +/-", "grpatr": "I.D. (mm)|I.D. (in)|O.D. (mm)|O.D. (in)|Thickness (mm)|Thickness (in)|Material|Colour", "grpflg": "Y" }, { "clsnam": "NYFINWSFW2663", "clsnbr": "031404", "catnm1": "Cords Canada Products", "catnm2": "Washers", "catnm3": "Nylon Finishing Washers", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_FinishingWasher_800x800.jpg|FinishingWasher_Dimensional_600x600.jpg", "notes": "These nylon washers protect cabinets from scratching, cover misaligned holes, etc. May also be used as glides, bumpers, feet and spacers.", "grpatr": "I.D. (in)|I.D. (mm)|O.D. (in)|O.D. (mm)|Thickness (in)|Thickness (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "NYFWRETAIN2661", "clsnbr": "031405", "catnm1": "Cords Canada Products", "catnm2": "Washers", "catnm3": "Nylon Flat Washers - Retaining", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_Nylon-Flat_Washer-Retaining-01_600x600.jpg|Washer-Retaining_Dimensional_01_600x600.jpg", "notes": "Similar to our standard flat washer, but with a specially configured inside diameter designed to grip the outside of the screw shank. The washer slides on the screw easily, but is retained on the screw. For use in applications requiring preassembly of the screw and washer to reduce final assembly cost. Other sizes may be tooled on request.", "grpatr": "I.D. (in)|I.D. (mm)|R Retaining Dia. (in)|R Retaining Dia. (mm)|O.D. (in)|O.D. (mm)|Thickness (in)|Thickness (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "1805", "clsnbr": "031406", "catnm1": "Cords Canada Products", "catnm2": "Washers", "catnm3": "Nylon Flat Washers - Special", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_Washer-Nylon-White_500x500.jpg|Flat_Washer_Dimensional_750x600.jpg", "notes": "Non-metallic flat washers in Nylon. Seal, insulate, absorb shock and vibration. They prevent galling and marring, and may also be used as spacers, guides, bearings, bushings, etc.¶For washers thicker than .125\u0022, look at our standard and special spacers sections.¶Other sizes can be tooled for moulding or stamping in any plastic. Request a quotation, special sizing, tolerance and quantity.¶¶Tolerances: O.D. +/- .015, I.D. +/- .005, T +/- .015", "grpatr": "I.D. (in)|I.D. (mm)|O.D. (in)|O.D. (mm)|Thickness (in)|Thickness (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "1469", "clsnbr": "031407", "catnm1": "Cords Canada Products", "catnm2": "Washers", "catnm3": "Nylon Flat Washers - Standard", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_Washer-Nylon-White_500x500.jpg|Flat_Washer_Dimensional_750x600.jpg", "notes": "Non-metallic flat washers in Nylon. These washers are made to be used with standard screw sizes #2 up to 1/2\u0022. They come in the four most popular thicknesses, from 1/32\u0022 up to 1/8\u0022. If one of these dimensions is not quite what you need, then check to see our section on special nylon flat washers.¶¶Tolerances: O.D. +/- .010, I.D. +/- .005, T +/- .015", "grpatr": "I.D. (in)|I.D. (mm)|O.D. (in)|O.D. (mm)|Thickness (in)|Thickness (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "NYSHWSPCSW2665", "clsnbr": "031408", "catnm1": "Cords Canada Products", "catnm2": "Washers", "catnm3": "Nylon Shoulder Washers - Special", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_ShoulderWasher_800x800.jpg|CordsCanada_ShoulderWasherStandard_800x800.jpg|NylonShWashScInsul_Dimensional_1500x600.jpg", "notes": "Suitable for a variety of insulation and mechanical applications. They seal, reduce vibration, act as spacers, guides, bushings and bearings. Isolate metal screws electrically and reduce corrosion. They can also be used as light load bearings in many applications. Shoulder washers are shown with the prefix NSW. Screw insulators are for standard screw sizes (#2 up to 1/4) and are shown with the prefix SC. Shoulder washers can often be interchanged with screw insulators, but they tend to have a shorter shank (L dimension). Custom sizes can be tooled for moulding. Please specify size, quantity and tolerances when requesting a quote.¶¶Tolerances all dimensions: ± .015", "grpatr": "I.D. (in)|I.D. (mm)|D (in)|D (mm)|O.D. (in)|O.D. (mm)|Thickness (in)|Thickness (mm)|L (in)|L (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "NYSHWSTDSW2664", "clsnbr": "031409", "catnm1": "Cords Canada Products", "catnm2": "Washers", "catnm3": "Nylon Shoulder Washers - Standard", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_ShoulderWasherStandard_800x800.jpg|NylonShouldWasher_Dimensional_800x600.jpg", "notes": "Suitable for a variety of insulation and mechanical applications. They seal, reduce vibration, act as spacers, guides, bushings and bearings. Isolate metal screws electrically and reduce corrosion. They can also be used as light load bearings in many applications.", "grpatr": "I.D. (in)|I.D. (mm)|D (in)|D (mm)|O.D. (in)|O.D. (mm)|Thickness (in)|Thickness (mm)|L (in)|L (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "TFW2666", "clsnbr": "031410", "catnm1": "Cords Canada Products", "catnm2": "Washers", "catnm3": "White Teflon Flat Washers", "catnm4": "", "catnm5": "", "imgnme": "PlasticFasteners_Washer-Nylon-White_500x500.jpg|Flat_Washer_Dimensional_750x600.jpg", "notes": "Non-metallic White Teflon Flat Washers.¶¶Tolerance all dimensions: ± .005, Thickness .031*¶¶*Also available in .062 thick (minimum order 10,000).¶Teflon to MIL-P-22241", "grpatr": "I.D. (in)|I.D. (mm)|O.D. (in)|O.D. (mm)|Thickness (in)|Thickness (mm)|Material|Colour", "grpflg": "Y" }, { "clsnam": "1801", "clsnbr": "0315", "catnm1": "Cords Canada Products", "catnm2": "Wire Management", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_WireManagement_Group_1000x700.jpg", "notes": "A selection of non -metallic products for organizing and managing wires and cables. Includes wire and cable holders, flat clamps, adhesive clips, and nylon ladder cable clamps.¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "MNCRLFLX2814", "clsnbr": "031501", "catnm1": "Cords Canada Products", "catnm2": "Wire Management", "catnm3": "Curliflex", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_WireManagement_Curliflex_800x800.jpg|CordsCanada_Curiflex_DimDraw_1000x800.jpg", "notes": "Wraps on like tape. Easy to remove and re-use. Allows branch-outs and break-outs of single/multiple wires and re-routing of replacement wires. The strong grip holds wires firmly while still allowing flexibility. Prevents kinking or curling of wires. Absorbs vibration, insulates cables and protects wires and tubes from abrasion. Stocked in standard cut, but also available in reverse (opposite) cut at no additional charge. Reverse cut must be specified at time of order.", "grpatr": "Bundle Range Min - Fraction|Bundle Range Max Dia - Fraction|A-Outside Diameter (in)|A-Outside Diameter (mm)|B Pitch (in)|B Pitch (mm)|C Thickness (in)|C Thickness (mm)|Material", "grpflg": "Y" }, { "clsnam": "WMHOSDENT2810", "clsnbr": "031502", "catnm1": "Cords Canada Products", "catnm2": "Wire Management", "catnm3": "Horizontal Orientation - Side Entry", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_ShortySideEntry_400x400.jpg|CordsCanada_SideEntry_CableHolder_DimDraw_1100x500.jpg", "notes": "Horizontal Orientation - Side Entry", "grpatr": "A - Fraction|B - Fraction|C - Fraction|Gate Type", "grpflg": "Y" }, { "clsnam": "MNNYLADCC2812", "clsnbr": "031503", "catnm1": "Cords Canada Products", "catnm2": "Wire Management", "catnm3": "Nylon Ladder Cable Clamps", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_LadderLock_400x400.jpg|CordsCanada_LadderLock_DimDraw_700x600.jpg", "notes": "Nylon Ladder Cable Clamps", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Max Bundle Diameter (in)|Max Bundle Diameter (mm)", "grpflg": "Y" }, { "clsnam": "MNPVCADCL2813", "clsnbr": "031504", "catnm1": "Cords Canada Products", "catnm2": "Wire Management", "catnm3": "PVC Adhesive Clips", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_PVCAdhesiveClip_400x400.jpg|CordsCanada_PVC_AdhClip_DimDraw_800x600.jpg", "notes": "PVC Adhesive Clips", "grpatr": "A - Fraction|B - Fraction|C - Fraction|D - Fraction", "grpflg": "Y" }, { "clsnam": "MNSHTADBCK2811", "clsnbr": "031505", "catnm1": "Cords Canada Products", "catnm2": "Wire Management", "catnm3": "Shorty Adhesive-Backed", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_ShortyAdhesiveWireHolder_500x500.jpg|CordsCanada_CableHolder_AdhBck_DimDraw_900x500.jpg", "notes": "Shorty Adhesive-Backed", "grpatr": "A - Fraction|B - Fraction|C - Fraction", "grpflg": "Y" }, { "clsnam": "WMSHPMNT2809", "clsnbr": "031506", "catnm1": "Cords Canada Products", "catnm2": "Wire Management", "catnm3": "Shorty Push-Mount", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_ShortyPushMntWireHolder_500x500.jpg", "notes": "Shorty Push-Mount", "grpatr": "Mounting Hole Diameter (in)|Mounting Hole Diameter (mm)|Base Dimensions (in)|Base Dimensions (mm)|Wire Capacity (in)|Wire Capacity (mm)|Overall Height (in)|Overall Height (mm)", "grpflg": "Y" }, { "clsnam": "WMVOT[ENT2808", "clsnbr": "031507", "catnm1": "Cords Canada Products", "catnm2": "Wire Management", "catnm3": "Vertical Orientation - Top Entry", "catnm4": "", "catnm5": "", "imgnme": "CordsCanada_VerticalOrientation-TopEntry_400x400.jpg|CordsCanada_VertTopEntry_DimDraw_1250x500.jpg", "notes": "Vertical Orientation - Top Entry", "grpatr": "A - Fraction|B - Fraction|C - Fraction|Gate Type", "grpflg": "Y" }, { "clsnam": "1003", "clsnbr": "04", "catnm1": "Shim Stock", "catnm2": "", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_Shim-Group_500x500.jpg", "notes": "Daemar supplies a range of shim products to aid in the alignment of motors, pumps, compressors, gearboxes, etc. Our lineup includes slotted shim, shim rolls and plastic shim.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1127", "clsnbr": "0401", "catnm1": "Shim Stock", "catnm2": "Plastic Shim Stock", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_Plastic_Shim.jpg", "notes": "DMR Plastic Shim Stock is colour coded for your convenience. It is used where corrosion is a problem. The size of the pieces are 5\u0022 x 20\u0022, 10\u0022 x 20\u0022, 20\u0022 x 20\u0022. From .0005\u0022 to .030\u0022 thick. Special slit widthsare available on request.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1122", "clsnbr": "040101", "catnm1": "Shim Stock", "catnm2": "Plastic Shim Stock", "catnm3": "Plastic Shim", "catnm4": "", "catnm5": "", "imgnme": "DMR_Plastic_Shim.jpg", "notes": "DMR Plastic Shim Stock is colour coded for your convenience. It is used where corrosion is a problem. The¶size of the pieces are 5\u0022x 20\u0022, 10\u0022 x 20\u0022, 20\u0022 x 20\u0022. From .0005\u0022 to .030\u0022. Special slit widths are available on request.", "grpatr": "Colour|Thickness (in)|Sheet Size (in)|Pieces per Pack", "grpflg": "Y" }, { "clsnam": "1123", "clsnbr": "040102", "catnm1": "Shim Stock", "catnm2": "Plastic Shim Stock", "catnm3": "Plastic Shim - Assortment Packs", "catnm4": "", "catnm5": "", "imgnme": "DMR_Plastic_Shim.jpg", "notes": "", "grpatr": "Sheet Size (in)|Total # of Pieces|Thickness (in)", "grpflg": "Y" }, { "clsnam": "1126", "clsnbr": "0402", "catnm1": "Shim Stock", "catnm2": "Shim Stock Rolls", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_Shim_Roll_400px.jpg", "notes": "Shim Stock Rolls features a roll of shim conveniently packaged in an easy opening box. Simple to store and transport the boxes are well labeled for quick and easy part identification.\u003Cbr\u003E\u003Cbr\u003EPrecision rolled to assure accuracy in all its applications. \u003Cbr\u003EShim Stock is available for 0.0005\u0022 to 0.032\u0022 thick.\u003Cbr\u003EStandard widths are 6\u0022 or 12\u0022\u003Cbr\u003EShim stock can be easily stamped, bored, cut, milled, sheared or drilled to suit any application.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1115", "clsnbr": "040201", "catnm1": "Shim Stock", "catnm2": "Shim Stock Rolls", "catnm3": "Brass Shim Rolls", "catnm4": "", "catnm5": "", "imgnme": "DMR_Shim_Roll_Brass-400px.jpg", "notes": "DMR Brass Shim Stock is used where some stiffness is required and where corrosion problems exist. It has¶been cold rolled to a 1/2 hard temper with a tensile strength of appox. 62,000 PSI. Brass Shim Stock is 70%¶Copper \u0026 30% Zinc. It has a Rockwell hardness of 30T 56/68.¶¶¶Brass Shim Stock meets the following specifications: SAE-CA 260,ASTM-B-36, AMS-4507 \u0026 QQB-613-#2. Typical¶weight : .010\u0022 X 6\u0022 X 100\u0022 1.8 lbs.", "grpatr": "Thickness (in)|Thickness - Tolerance (in)|Rolls (in)|Width (in)|Width - Tolerance (in)", "grpflg": "Y" }, { "clsnam": "1114", "clsnbr": "040202", "catnm1": "Shim Stock", "catnm2": "Shim Stock Rolls", "catnm3": "Stainless Steel Shim Rolls", "catnm4": "", "catnm5": "", "imgnme": "DMR_Shim_Roll_400px.jpg", "notes": "DMR Stainless Steel Shim can be used in any application where corrosion is a concern. DMR Stainless Steel¶is 300 Series, full hard tempered (half-hard and annealed Stainless is also available on request). Full-hard¶Stainless Steel is slightly magnetic due to cold rolling. Stainless Steel Shim Stock has a Rockwell hardness of¶C40-45 and meets the following specifications: MIL-S-5059, QQS766 and QQS763. Special slit widths are also¶available on request. Typical weight: .010\u0022 X 6\u0022 X 50\u0022 =. 875 lbs.", "grpatr": "Thickness (in)|Thickness - Tolerance (in)|Rolls (in)|Width (in)|Width - Tolerance (in)", "grpflg": "Y" }, { "clsnam": "1116", "clsnbr": "040203", "catnm1": "Shim Stock", "catnm2": "Shim Stock Rolls", "catnm3": "Steel Shim Rolls", "catnm4": "", "catnm5": "", "imgnme": "DMR_Shim_Roll_400px.jpg", "notes": "DMR Steel Shim is low carbon mild steel cold rolled to a #1 hard temper. It is stiff and springy, and can be used¶where hardness is required. The material can be punched or sheared with minimum burring and distortion.¶Steel Shim Stock meets the following specifications: AISI 1010 \u0026 QQS 698. Available in .001\u0022 to .031\u0022 and in¶standard packages 6\u0022 X 100\u0022 or 12\u0022 X 120\u0022. Special slit widths are also available on request. Typical weight¶.010\u0022 X 6\u0022 X 100\u0022 = 1.7 lbs.", "grpatr": "Thickness (in)|Thickness - Tolerance (in)|Rolls (in)|Width (in)|Width - Tolerance (in)", "grpflg": "Y" }, { "clsnam": "1066", "clsnbr": "0403", "catnm1": "Shim Stock", "catnm2": "Slotted Shim Kits", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "SlottedShim_OA-KIT-20_484x350.jpg|SlottedShim_A-075_450x450.jpg|SlottedShim_E-075_450x450.jpg|DMR_SlottedShim-BoltSizes_Rev-B_500x250.jpg", "notes": "DMR® slotted shims are manufactured from 302/304 stainless steel. Each kit contains 10 (mini) or 20 (standard) shims of each thickness (.001, .002, .003, .004, .005, .010, .015, .020, .025, .050, .075, .100, .125). Let DMR® kits provide the right solution for all of your slotted shim applications.\u003CBR\u003E\u003CBR\u003E¶Shim Kit Features:¶\u003Cul\u003E\u003Cli\u003EEach shim printed with thickness and size information for ease of selection\u003C/li\u003E¶\u003Cli\u003EWide slots for versatility and ease of installation\u003C/li\u003E¶\u003Cli\u003EShim material is re-rolled to assure the best thickness tolerance possible.\u003C/li\u003E¶\u003Cli\u003ESturdy steel carrying case aids in organization, storage and transport\u003C/li\u003E\u003Cli\u003EDividers\u003C/li\u003E¶\u003Cli\u003EShim Removal Tool (not included in size E and H kits)\u003C/li\u003E¶\u003Cli\u003EShim Lock\u003C/li\u003E\u003C/ul\u003E", "grpatr": "Size|Quantity", "grpflg": "Y" }, { "clsnam": "1032", "clsnbr": "0404", "catnm1": "Shim Stock", "catnm2": "Slotted Shim Replacement Packs", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "Daemar_Relacement_SlottedShim_300x300.jpg|Daemar_Relacement_SlottedShim-E-300x300.jpg|DMR_SlottedShim-BoltSizes_Rev-B_500x250.jpg", "notes": "DMR® slotted shims are manufactured from 302/304 stainless steel and come in six size A (2\u0022x2\u0022), B (3\u0022x3\u0022), C (4\u0022x4\u0022), D (5\u0022x5\u0022), E (6\u0022x6\u0022) and H (8\u0022x8\u0022). Every size is available in each of the 13 thickness (.001, .002, .003, .004, .005, .010, .015, .020, .025, .050, .075, .100, .125) and replacement packs contain either 10 or 20 shims per box. All shims are printed with thickness and size information for ease of selection and are designed with wide slots for versatility and ease of installation.\u003Cbr /\u003E\u003Cbr /\u003E", "grpatr": "Thickness (in)|Shim Size (in)|Pieces per Pack", "grpflg": "Y" }, { "clsnam": "1004", "clsnbr": "05", "catnm1": "Braided Compression Packing", "catnm2": "", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_BraidedPacking_Segment.jpg", "notes": "Braided Packing Construction\u003Cul\u003E\u003Cli\u003E Square Braided\u003C/li\u003E\u003Cli\u003EBraid over Braid\u003C/li\u003E\u003Cli\u003EBraid over Core\u003C/li\u003E\u003Cli\u003EInterbraid\u003C/li\u003E\u003Cli\u003EDie Form\u003C/li\u003E\u003C/ul\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "2073", "clsnbr": "0501", "catnm1": "Braided Compression Packing", "catnm2": "Style 1100CR", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style1100CR_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003EBraided from a combination of expanded flexible graphite (1100TCP) and high strength carbon fibers (90). Carbon fibers are braided into the corners to provide anti-extrusion and better abrasion resistance in tough applications. Can give virtually leak free performance. 1100CR was independently fire tested to API 589 at API 607 temperatures and pressures.\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EConstruction:\u003C/STRONG\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 1250 ºF (650 ºC) - steam\u003CBR\u003E\u003CSTRONG\u003ETemp:\u003C/STRONG\u003E to 1050 ºF (565 ºC) - atmosphere\u003CBR\u003E\u003CSTRONG\u003EpH:\u003C/STRONG\u003E 0 - 14 except strong oxidizers\u003CBR\u003E\u003CSTRONG\u003EPressure:\u003C/STRONG\u003E to 3000 psi \u003CBR\u003E\u003CSTRONG\u003ESpeed:\u003C/STRONG\u003E 4000 FPM\u003C/SPAN\u003E\u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2074", "clsnbr": "0502", "catnm1": "Braided Compression Packing", "catnm2": "Style 1100I - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style1100I_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003EBraided from a combination of expanded flexible graphite and inconel wire. 1100 I retains dimensional stability in high temerature, high pressure environments, and can meet most VOC emission control regulations. 1100 I was independantly fire tested to API 589 at API 607 temeratures and pressures.\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EConstruction:\u003C/STRONG\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 1200 ºF (650 ºC) - steam\u003CBR\u003E \u003CSTRONG\u003ETemp:\u003C/STRONG\u003E to 850 ºF (455 ºC) - atmosphere\u003CBR\u003E\u003CSTRONG\u003EpH:\u003C/STRONG\u003E 0 - 14 except strong oxidizers\u003CBR\u003E\u003CSTRONG\u003EPressure:\u003C/STRONG\u003E to 3000 psi (pump service) \u003CBR\u003E\u003CSTRONG\u003ESpeed:\u003C/STRONG\u003E 1500 FPM\u003C/SPAN\u003E\u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2075", "clsnbr": "0503", "catnm1": "Braided Compression Packing", "catnm2": "Style 1100TCP - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style1100TCP_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003EBraided from pure expanded graphite. It is resilient, self lubricating, chemically inert and thermally conductive. 1100TCP can be used in both pumps and valves in a wide range of service conditions\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EConstruction:\u003C/STRONG\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 1200 ºF (650 ºC) - steam\u003CBR\u003E\u003CSTRONG\u003ETemp:\u003C/STRONG\u003E to 850 ºF (455 ºC) - atmosphere\u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 0 - 14 except stong oxidizers\u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 3000 psi \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 4000 FPM\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003E* may require anti-extrusion rings *\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003E* Does not contain cotton carrier *\u003C/SPAN\u003E\u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "1979", "clsnbr": "0504", "catnm1": "Braided Compression Packing", "catnm2": "Style 1152", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style1152_400x289.jpg", "notes": "\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003ESpecial syntex fibre, each strand impregnated with PTFE dispersion both prior to and after braiding. Finished packing also has a break-in lubricant. An asbestos replacement packing for general service applications. Good chemical resistance. \u003CBR\u003E\u003CBR\u003E\u003CB\u003EConstruction:\u003C/B\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 500 ºF (260 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 0 - 12 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 500 psi \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 2200 FPM. \u003C/SPAN\u003E\u003CBR\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2076", "clsnbr": "0505", "catnm1": "Braided Compression Packing", "catnm2": "Style 1152K - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style1152K_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003EUnique packing combining 1152 and 170 fibers. Aramid corners prevent roll and extrusion. Well suited for abrasive applications and end rings with other packings. \u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EConstruction:\u003C/STRONG\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 500 ºF (260 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 3 - 12 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 500 psi \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 2200 FPM\u003C/SPAN\u003E\u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2077", "clsnbr": "0506", "catnm1": "Braided Compression Packing", "catnm2": "Style 1162IB - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style1162IB_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003ESyntex fiber thoroughly impregnated with PTFE, a break-in lubricant is added for start-up. An economical PTFE general service packing.\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EConstruction:\u003C/STRONG\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 500 ºF (260 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 2 - 10 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 300 psi \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 2000 FPM\u003C/SPAN\u003E\u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2078", "clsnbr": "0507", "catnm1": "Braided Compression Packing", "catnm2": "Style 1190 - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style1190_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003ESpecial Kynol® fibers treated with PTFE and break-in lubricant. This is a non-contaminating packing for use in paper mills in almost all pump and valve applications.\u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EConstruction:\u003C/STRONG\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 500 ºF (260 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 0 - 13 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 500 psi \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 1500 FPM\u003C/SPAN\u003E\u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "1981", "clsnbr": "0508", "catnm1": "Braided Compression Packing", "catnm2": "Style 1398 - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style1398_400x289.jpg", "notes": "\u003CSPAN class=text1\u003ESyntex fibre packing impregnated with a high temperature lubricant. Finished packing is surface graphited. An asbestos replacement packing for general service use on pumps and valves. \u003CBR\u003E\u003CBR\u003E\u003CB\u003EConstruction:\u003C/B\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 500 ºF (260 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 4 - 10 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 300 psi \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 1500 FPM.\u003C/SPAN\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2079", "clsnbr": "0509", "catnm1": "Braided Compression Packing", "catnm2": "Style 1414 - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style1414_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003EHigh temerature carbon yarn with inconel wire braided over a resilient core thoroughly impregnated with graphite and corrosion inhibitor.\u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EConstruction:\u003C/STRONG\u003E Braid over core \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 1200 ºF (650 ºC) - steam\u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 1 - 12 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 2500 psi \u003CBR\u003E\u003C/SPAN\u003E\u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2080", "clsnbr": "0510", "catnm1": "Braided Compression Packing", "catnm2": "Style 1416 - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style1416_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003ETexturized fiberglass fiber packing. It is braided dry with no lubricant. Packing will not swell, shrink and is completely incombustible. Used for sealing over doors. Excellent chemical resistance.\u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003EPTFE packing, interlock braid with a break-in lubricant.Food Grade FDA PTFE filaments and break-in lubricant. \u003CBR\u003E\u003CBR\u003E\u003CB\u003EConstruction:\u003C/B\u003E Square Plaited\u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 1000 ºF (535 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 2 - 11 \u003CBR\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2081", "clsnbr": "0511", "catnm1": "Braided Compression Packing", "catnm2": "Style 1430 - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style1430_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003ESyntex fiber packing treated with a high temerature lubricant and graphited. Soft and pliable for general service on pumps and valves.\u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EConstruction:\u003C/STRONG\u003E Square Plaited\u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 500 ºF (260 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 4 - 10 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 300 psi \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 1500 FPM\u003C/SPAN\u003E\u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2064", "clsnbr": "0512", "catnm1": "Braided Compression Packing", "catnm2": "Style 154 - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style154_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003EPTFE packing with PTFE dispersion. A dense firm packing used in valve and slow speed pump applications. Excellent chemical resistance.\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003CBR\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003E\u003CBR\u003E\u003CB\u003EConstruction:\u003C/B\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 500 ºF (260 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 0 - 14 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 300 psi (20 bar) (pump service) \u003CBR\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003E\u003CB\u003EPressure:\u003C/B\u003E to 2000 psi (20 bar) (valves service) \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 1000 FPM \u003CBR\u003E\u003C/SPAN\u003E\u003CBR\u003E\u003C/SPAN\u003E\u003CBR\u003E\u003C/P\u003E\u003C/SPAN\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2063", "clsnbr": "0513", "catnm1": "Braided Compression Packing", "catnm2": "Style 154 FDA - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style154FDA_400x289.jpg", "notes": "\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003EPTFE packing, interlock braid with a break-in lubricant.Food Grade FDA PTFE filaments and break-in lubricant. \u003CBR\u003E\u003CBR\u003E\u003CB\u003EConstruction:\u003C/B\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 530 ºF (280 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 0 - 14 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 290 psi / 20 Bar (pump service) \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 2350 FPM \u003C/SPAN\u003E\u003CBR\u003E\u003C/SPAN\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2065", "clsnbr": "0514", "catnm1": "Braided Compression Packing", "catnm2": "Style 154S - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style154S_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003EPTFE packing treated with an inert lubricant. A soft and resilient packing for chemical pump and valve applications.\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EConstruction:\u003C/STRONG\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 500 ºF (260 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 0 - 14 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 300 psi (20 bar) \u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003E\u003CB\u003ESpeed:\u003C/B\u003E 1500 FPM \u003CBR\u003E\u003C/P\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2068", "clsnbr": "0515", "catnm1": "Braided Compression Packing", "catnm2": "Style 160 - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style160_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003EGraphite filament packing impregnated with graphite dispersion. For severe service applications where leakage must be held to a minimum. Excellent chemical resistance.\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EConstruction:\u003C/STRONG\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 850 ºF (455 ºC) - atmosphere\u003CBR\u003E\u003CSTRONG\u003ETemp:\u003C/STRONG\u003E to 1200 ºF (650 ºC) - steam\u003CBR\u003E\u003CSTRONG\u003EpH:\u003C/STRONG\u003E 0 - 14 \u003CBR\u003E\u003CSTRONG\u003EPressure:\u003C/STRONG\u003E to 500 psi (pump service) \u003CBR\u003E\u003CSTRONG\u003EPressure:\u003C/STRONG\u003E to 2500 psi (valves service) \u003CBR\u003E\u003CSTRONG\u003ESpeed:\u003C/STRONG\u003E 4000 FPM\u003C/SPAN\u003E\u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "1971", "clsnbr": "0516", "catnm1": "Braided Compression Packing", "catnm2": "Style 165 - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style165_400x289.jpg", "notes": "\u003CSPAN class=text1\u003EGraphite filled PTFE fibre packing that improves thermal conductivity and will not harden. Commonly called GFO \u003CBR\u003E\u003CBR\u003E\u003CB\u003EConstruction:\u003C/B\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 550 ºF (285 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 0 - 14 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 300 psi \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 4300 FPM\u003C/SPAN\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2069", "clsnbr": "0517", "catnm1": "Braided Compression Packing", "catnm2": "Style 165K - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style165K_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003EUnique packing combining PTFE graphite with aramid corners. Aramid corners prevent rolls and extrusion. Excellent service packing in severe pump applications. Widely used in paper mills.\u003C/SPAN\u003E\u003CBR\u003E\u003C/P\u003E\u003CP\u003E\u003CSTRONG\u003EConstruction:\u003C/STRONG\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 550 ºF (285 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 2 - 12 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 300 psi \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 2500 FPM\u003C/P\u003E\u003CP\u003E \u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "1973", "clsnbr": "0518", "catnm1": "Braided Compression Packing", "catnm2": "Style 165LA - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style165LA_400x289.jpg", "notes": "\u003CSPAN class=text1\u003EGraphite filled PTFE fibre packing that improves thermal conductivity and will not harden. \u003CBR\u003E\u003CBR\u003E\u003CB\u003EConstruction:\u003C/B\u003E Interlock Braid\u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 550 ºF (285 ºC)\u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 0 - 14\u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 300 psi \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 4300 FPM\u003C/SPAN\u003E\u003CBR\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "1975", "clsnbr": "0519", "catnm1": "Braided Compression Packing", "catnm2": "Style 170 - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style170_400x289.jpg", "notes": "\u003CSPAN class=text1\u003EAramid fibre packing with an inert lubricant. Extremely durable, highly abrasive resistant packing. Ideal for slurry service. \u003CBR\u003E\u003CBR\u003E\u003CB\u003EConstruction:\u003C/B\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 500 ºF (260 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 3 - 11 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 300 psi \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 1900 FPM\u003C/SPAN\u003E\u003CBR\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2070", "clsnbr": "0520", "catnm1": "Braided Compression Packing", "catnm2": "Style 182 - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style182_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003ESpun aramid fiber impregnated with PTFE dispersion and break-in lubricant. Ideal for valves and pumps in abrasive service.\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSTRONG\u003EConstruction:\u003C/STRONG\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 500 ºF (260 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 2 - 12 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 500 psi \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 2250 FPM\u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2082", "clsnbr": "0521", "catnm1": "Braided Compression Packing", "catnm2": "Style 2000- Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style2000_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003ESpecial meta-aramid fiber with PTFE and break-in lubricant. Very conformable and abrasive resistant. highly resistant to degradation and chemical attack. For use in agitators, stock pumps, mixers, etc. \u003C/SPAN\u003E\u003CBR\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EConstruction:\u003C/STRONG\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 500 ºF (260 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 4 - 10\u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 300 psi \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 1500 FPM\u003C/P\u003E¶\u003CP\u003E \u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2083", "clsnbr": "0522", "catnm1": "Braided Compression Packing", "catnm2": "Style 3165 - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style3165_400x289.jpg", "notes": "\u003CP\u003ESpecial blend of PTFE and graphite fibers plus a high temperature lubricant. An economical substitute for style 165. Good chemical and abrasion resistant packing. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EConstruction:\u003C/STRONG\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 550 ºF (285 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 0 - 14 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 300 psi (pump service) \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 4500 FPM\u003C/P\u003E¶\u003CP\u003E \u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2084", "clsnbr": "0523", "catnm1": "Braided Compression Packing", "catnm2": "Style 4100 - Valve Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style4100_400x289.jpg", "notes": "\u003CP\u003EExtruded round valve packing made of 100% expanded virgin PTFE. FDA Suitable (FDA 21 CRR 177.1550)\u003C/P\u003E¶\u003CP\u003E \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 450 ºF (600 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 0 - 14 \u003CBR\u003E\u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per box", "grpflg": "Y" }, { "clsnam": "2085", "clsnbr": "0524", "catnm1": "Braided Compression Packing", "catnm2": "Style 4200 - Joint Sealant", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style4200_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003EChemcord 100% expanded virgin PTFE joint sealant. Maximum performance gasket material. FDA approaved.\u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CB\u003ETemp:\u003C/B\u003E to 600ºF (315ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 0 - 14 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 3000 psi (pump service) \u003CBR\u003E\u003C/SPAN\u003E\u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per box", "grpflg": "Y" }, { "clsnam": "2066", "clsnbr": "0525", "catnm1": "Braided Compression Packing", "catnm2": "Style 50 - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style50_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003ECarbon yarn packing heavily impregnated with PTFE dispersion. For severe services in pumps or valves handling chemicals, solvents and acids. An ideal packing for paper mill applications.\u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EConstruction:\u003C/STRONG\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 600 ºF (315 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 0 - 14 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 500 psi (35 bar) \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 3000 FPM \u003CBR\u003E\u003C/SPAN\u003E\u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2071", "clsnbr": "0526", "catnm1": "Braided Compression Packing", "catnm2": "Style 525T - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style525T_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003EPremier marine service packing made with flax fibers and lubricated with PTFE dispersion. It has low friction and high tensile strength. Excellent for water service and paper mill applications.\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSTRONG\u003EConstruction:\u003C/STRONG\u003E Square Braid\u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 250 ºF (120 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 4 - 9 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 200 psi \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 1500 FPM \u003CBR\u003E\u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "1977", "clsnbr": "0527", "catnm1": "Braided Compression Packing", "catnm2": "Style 528 - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style528_400x289.jpg", "notes": "\u003CSPAN class=text1\u003EFlax fibre packing, lubricated with tallow and wax. Used for brine, cold water and oil service. Ideal for marine applications. \u003CBR\u003E\u003CBR\u003E\u003CB\u003EConstruction:\u003C/B\u003E Square Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 200 ºF (105 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 5 - 9 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 150 psi \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 1200 FPM. \u003C/SPAN\u003E\u003CBR\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2072", "clsnbr": "0528", "catnm1": "Braided Compression Packing", "catnm2": "Style 531 - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style531_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003EFlax fiber packing, treated with a petroleum-based lubricant and surface graphited.\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EConstruction:\u003C/STRONG\u003E Square Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 220 ºF (105 ºC) \u003CBR\u003E\u003CB\u003EpH:\u003C/B\u003E 5 - 9 \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 150 psi \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 1200 FPM\u003C/SPAN\u003E\u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "2067", "clsnbr": "0529", "catnm1": "Braided Compression Packing", "catnm2": "Style 90 - Braided Compression Packing", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "BraidedPacking-Style90_400x289.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003ECarbon Yarn packing impregnated with graphite dispersion. For severe services in pump and valve applications, including super-heated steam, acids, alkalis, etc.\u003C/SPAN\u003E\u003CBR\u003E\u003C/P\u003E\u003CP\u003E\u003CSTRONG\u003EConstruction:\u003C/STRONG\u003E Interlock Braid \u003CBR\u003E\u003CB\u003ETemp:\u003C/B\u003E to 850 ºF (455 ºC) - atmosphere\u003CBR\u003E\u003CSTRONG\u003ETemp:\u003C/STRONG\u003E to 1200 ºF (650 ºC) -steam\u003CBR\u003E\u003CSTRONG\u003EpH:\u003C/STRONG\u003E 0 - 14 \u003CBR\u003E\u003CSTRONG\u003EPressure:\u003C/STRONG\u003E to 500 psi (pump service) \u003CBR\u003E\u003CB\u003EPressure:\u003C/B\u003E to 2500 psi (valves service) \u003CBR\u003E\u003CB\u003ESpeed:\u003C/B\u003E 4000 FPM\u003C/P\u003E¶¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSTRONG\u003EFor all partial orders 1-4 lbs (less than box quantity) the cutting charge is $35.00, packing is sold in 5 lbs spools.\u003C/STRONG\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Braided Size|Feet per lbs|Box size in LBS", "grpflg": "Y" }, { "clsnam": "1040", "clsnbr": "06", "catnm1": "Shaft Repair Sleeves", "catnm2": "", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "Shaft-Repair-Sleeves_.jpg|DMR_Sleeve_Dimensional_Image--700x400.jpg|Shaft-Repair_a_b.jpg|DMR_ShaftRepairSleeve_Installation_01.jpg", "notes": "DMR Sleeves are precision stainless steel wear sleeves designed to prolong the life of damaged shafts and yokes by providing a new sealing surface that is superior to most original finishes and materials. Over time sealing lips can groove shafts due to factors such as dirt, heat, excessive water, lack of lubrication and high shaft speeds. DMR Sleeves offer a cost effective alternative to resizing, metalizing or replacing severely damaged surfaces. DMR Sleeve\u0027s low profile design means that the same size seal can be utilized and multi-lip oil seals can be accommodated.¶", "grpatr": "Nominal Shaft Diameter (in)|Nominal Shaft Diameter (mm)|Minimum Shaft Diameter (in)|Minimum Shaft Diameter (mm)|Maximum Shaft Diameter (in)|Maximum Shaft Diameter (mm)|Width (in)[B - Width on Shaft (in)]|Width (mm)[B - Width on Shaft (mm)]|Length (in)[C - Overall Sleeve Width (in)]|Length (mm)[C - Overall Sleeve Width (mm)]|Flange Diameter (in)[D - Flange Diameter (in)]|Flange Diameter (mm)[D - Flange Diameter (mm)]|Instal Tool Depth (in)[E - Installation Tool Depth (in)]|Instal Tool Depth (mm)[", "grpflg": "Y" }, { "clsnam": "1006", "clsnbr": "07", "catnm1": "Keystock", "catnm2": "", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "Collage_keystock.jpg", "notes": "Daemar\u0027s Keystock are removable bars that are used to transmit torque from components including couplings, sheaves, sprockets and gears to a shaft.¶¶They are called \u0022keys\u0022 because they lock a component to the shaft by means of a corresponding keyway in a shaft.¶¶Keystock is available in both inch and metric sizes. Common keystock materials include steel, stainless steel and plated with zinc and are supplied in standard lengths of 12\u0022 \u0026 36 lengths.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1136", "clsnbr": "0701", "catnm1": "Keystock", "catnm2": "Gib Head Machine Keys", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_GibHeadKey-400x400.jpg|DMR_GibheadKey-Dimensions_670x320.jpg", "notes": "DMR® Gib Head Keys are used for holding pulleys and gears tightly on the shaft. They are tapered 1/8\u0022 per foot to fit snugly on the shaft and are machined from 1018 steel.", "grpatr": "A (in)|B (in)|Length (in)|C (in)|D (in)", "grpflg": "Y" }, { "clsnam": "1137", "clsnbr": "0702", "catnm1": "Keystock", "catnm2": "Machinery Keys", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_MachineryKey_400x400.jpg|DMR_StandardMachineryKey-Dimensions_670x320.jpg", "notes": "\u003Cul\u003E¶\u003Cli\u003EManufactured from 1018 carbon steel\u003C/li\u003E¶\u003Cli\u003EPlain or zinc plated finish\u003C/li\u003E¶\u003Cli\u003EEnd styles available: both ends square, one end round, both ends round\u003C/li\u003E¶\u003C/ul\u003E", "grpatr": "A (in)|B (in)|Length (in)", "grpflg": "Y" }, { "clsnam": "1130", "clsnbr": "0703", "catnm1": "Keystock", "catnm2": "Metric Keystock", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_Keystock_Square_400x400.jpg|DMR_RectangularKeystock-Dimensions_670x420.jpg", "notes": "DMR® Metric Key Stock is made of the highest quality cold drawn steel. Bars are cut - not sheared.¶¶¶Material Options:¶\u003Cul\u003E¶\u003Cli\u003E1018 Carbon Steel (zinc plated, select sizes available unplated)\u003C/li\u003E¶\u003Cli\u003E303 Stainless Steel\u003C/li\u003E¶\u003C/ul\u003E¶Oversize tolerances: -.000 to + .0762mm. ¶¶Standard length is 12 inch, select sizes available in 1 meter lengths.", "grpatr": "A (mm)|A (in)|B (mm)|B (in)|Length (in)|Length (mm)|Material|Finish", "grpflg": "Y" }, { "clsnam": "1042", "clsnbr": "0704", "catnm1": "Keystock", "catnm2": "Rectangular Keystock", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_Keystock_Rectangular_400x400.jpg|DMR_RectangularKeystock-Dimensions_670x420.jpg", "notes": "All DMR® steel keystock is available in 12\u0022 and 36\u0022 lengths with the size clearly marked on each bar. The material is 1018 carbon steel and is available with either zinc plated or plain finish, stainless steel and brass.¶", "grpatr": "A (in)|B (in)|Length (in)|Material|Finish", "grpflg": "Y" }, { "clsnam": "1097", "clsnbr": "0705", "catnm1": "Keystock", "catnm2": "Spring Pins", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_SpringPin_400x400.jpg", "notes": "Spring pins expand and exert tension against the inner wall of a hole, securing the position of two or more parts relative to each other. Spring pins have a body diameter which is larger than the hole diameter, and a chamfer on either one or both ends to facilitate starting the pin into the hole. The spring action of the pin allows it to compress as it assumes the diameter of the hole.", "grpatr": "Diameter (in)|Length (in)|Quantity", "grpflg": "Y" }, { "clsnam": "1041", "clsnbr": "0706", "catnm1": "Keystock", "catnm2": "Square Keystock", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_Keystock_Square_400x400.jpg|DMR_StandardMachineryKey-Dimensions_670x320.jpg", "notes": "All DMR® steel keystock is available in 12\u0022 and 36\u0022 lengths with the size clearly marked on each bar. The material is 1018 carbon steel and is available with either zinc plated or plain finish, stainless steel and brass.¶", "grpatr": "A (in)|B (in)|Size|Length (in)|Material|Finish", "grpflg": "Y" }, { "clsnam": "1131", "clsnbr": "0707", "catnm1": "Keystock", "catnm2": "Step Keystock", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_StepKey-1_400x400.jpg|DMR_StepKey_Type-1_400x400.jpg|DMR_StepKey_Type-2_400x400.jpg", "notes": "Cold finished. Oversize keystock ground down to A, B-D \u0026 C dimensions per tolerances listed below. Use for couplings, gears, sheaves, sprockets, pulleys - anything that keys to a shaft. Available in 12 inch lengths.¶¶Material: 1018 carbon steel. Zinc plated for corrosion resistance.", "grpatr": "A (in)|B (in)|C (in)|D (in)|Length (in)|Type", "grpflg": "Y" }, { "clsnam": "1129", "clsnbr": "0708", "catnm1": "Keystock", "catnm2": "Undersize Tolerance Barstock", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_Keystock_UnderSized_400x400.jpg|DMR_RectangularKeystock-Dimensions_670x420.jpg", "notes": "DMR® undersize keystock is used where close or undersized tolerances are required. Made from 1018 carbon steel and 303 stainless steel.¶", "grpatr": "A (in)|B (in)|Size A\u0026B|Length (in)|Material|Finish", "grpflg": "Y" }, { "clsnam": "1135", "clsnbr": "0709", "catnm1": "Keystock", "catnm2": "Woodruff Keys", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_Woodruff_Key-2_400x400.jpg|DMR_WoodruffKey_Dimensions-400x400.jpg", "notes": "Machined from 1035 steel, DMR® Keys (Half Moon Keys) are available from stock in 50 S.A.E. standard sizes. Special sizes and materials such as alloy steel (A-8630) are available on special order from the factory. Assortments of popular sizes are available for the convenience of mechanics and repair personnel.", "grpatr": "W (in)|L (in)|USA Std. No.|No.", "grpflg": "Y" }, { "clsnam": "1134", "clsnbr": "0710", "catnm1": "Keystock", "catnm2": "3 Foot Shafts", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_3-Foot-Shafts.jpg|DMR_3-Foot-Shafts-Dimensions_670x320.jpg", "notes": "DMR 3 foot unplated round steel shafts are made from bar-quality cold drawn steel - 50% stronger than hot rolled mild steel - which can be drilled and have keyways cut. Just right for furnace blower shafts, ventilator shafts, axles, farm equipment drive shafts and many uses you will discover yourself. Each shaft has a colddrawn finish for use with brass, bronze copper or aluminum bushings. Bar ends are machine-cut, not sheared.¶¶Tolerances will run plus .000\u0022 to minus .002\u0022¶", "grpatr": "Diameter (in)|Length (in)", "grpflg": "Y" }, { "clsnam": "1007", "clsnbr": "08", "catnm1": "Bushings \u0026 Bearings", "catnm2": "", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "lg_Bushings_Group-01.jpg", "notes": "Dryslide®\u003Cbr\u003EFiber-Lube®\u003Cbr\u003ELinear Motion Bearings\u003Cbr\u003EPowdered Metal Bushings\u003Cbr\u003ESolid Metal Bushings\u003Cbr\u003EPlastic Bushings\u003Cbr\u003E ¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1043", "clsnbr": "0801", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Dryslide®", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "lg_TH-Bushings-Group.jpg", "notes": "Self-lubricated dry sliding bearings. A composite structure consisting of steel backing, sintered bronze interlayer, PTFE anti-wear surface. Options include: lead-free, bronze or stainless steel backings.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1073", "clsnbr": "080101", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Dryslide®", "catnm3": "TH - Self Lubricating Bushings (Lead Free)", "catnm4": "", "catnm5": "", "imgnme": "lg_TH-Bushings-Group.jpg", "notes": "TH Series has a composite structure consisting of a Zinc/ Tin with Low carbon steel backing, an intermediate layer of sintered bronze and a PTFE based sliding lining. Available in inch and metric sizes.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1071", "clsnbr": "08010101", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Dryslide®", "catnm3": "TH - Self Lubricating Bushings (Lead Free)", "catnm4": "FTH - Flange Bushings - Inch Sizes", "catnm5": "", "imgnme": "dmr-fth-series-bushings-bearings-render-profile.jpg|FTH_dim.jpg", "notes": "FTH Flange Bushings¶¶Length = 0.25 to 2.00 in¶¶Shaft Diameter = 0.3731 to 1.7487 in¶¶A composite structure, FTH consists of a carbon steel backing, an intermediate layer of sintered bronze, PTFE based sliding lining. The main items in the FTH range are the wrapped cylindrical bushings (DIN 1494) and the flanged cylindrical bushings. From a technical point of view, the product is already widely known and new applications are constantly being identified to take advantage of the high load capacity, the self-lubricated feature and the excellent ratio between cost and performance of the whole range.", "grpatr": "Diameter - D1 (in)|Diameter - D2 (in)|Diameter - D3 (in)|Length - L (in)", "grpflg": "Y" }, { "clsnam": "1078", "clsnbr": "08010102", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Dryslide®", "catnm3": "TH - Self Lubricating Bushings (Lead Free)", "catnm4": "FTH - Flange Bushings - Metric Sizes", "catnm5": "", "imgnme": "dmr-fth-series-bushings-bearings-render-profile.jpg|FTH_dim.jpg", "notes": "FTH Flange Bushings¶¶Length = 4.00 to 26.00 mm¶¶Shaft Diameter = 5.978 to 44.975 mm¶¶¶The FTH flanged bushing consists of a carbon steel backing, an intermediate layer of sintered bronze, PTFE based sliding lining. From a technical point of view, the product is already widely known and new applications are constantly being identified to take advantage of the high load capacity, the self-lubricated feature and the excellent ratio between cost and performance of the whole range.", "grpatr": "Diameter - D1 (mm)|Diameter - D3 (mm)|Length - L (mm)|Shaft Diameter - d (mm)|Housing Bore - Dg (mm)", "grpflg": "Y" }, { "clsnam": "1070", "clsnbr": "08010103", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Dryslide®", "catnm3": "TH - Self Lubricating Bushings (Lead Free)", "catnm4": "TH - Sleeve Bushings - Inch Sizes", "catnm5": "", "imgnme": "lg_TH-Bushings-Group.jpg|TH_dim.jpg", "notes": "Length = 0.125 to 32.000 in \u003CBR\u003EShaft Diameter = 0.1236 to 6.9954 in \u003CBR\u003E\u003CBR\u003EThe TH Dryslide bushing is a self-lubricated dry sliding bearings. A composite structure, TH cylindrical bushing consists of a Zinc/Tin low carbon steel backing, an intermediate layer of sintered bronze, PTFE based sliding lining. These are the wrapped cylindrical bushings (DIN 1494). From a technical point of view, the product is already widely known and new applications are constantly being identified to take advantage of the high load capacity, the self-lubricated feature and the excellent ratio between cost and performance of the whole range.", "grpatr": "Diameter - D1 (in)|Diameter - D2 (in)|Length - L (in)|Shaft Diameter - d (in)|Housing Bore - Dg (in)", "grpflg": "Y" }, { "clsnam": "1077", "clsnbr": "08010104", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Dryslide®", "catnm3": "TH - Self Lubricating Bushings (Lead Free)", "catnm4": "TH - Sleeve Bushings - Metric Sizes", "catnm5": "", "imgnme": "lg_TH-Bushings-Group.jpg|TH_dim.jpg", "notes": "Cylindrical Bushings¶¶Length = 3.00 to 115.00 mm¶¶Shaft Diameter = 2.994 to 300.00 mm¶¶¶A composite structure, TH cylindrical bushing consists of a carbon steel backing, an intermediate layer of sintered bronze, PTFE based sliding lining. The main items in the TH range are the wrapped cylindrical bushings (DIN 1494). From a technical point of view, the product is already widely known and new applications are constantly being identified to take advantage of the high load capacity, the self-lubricated feature and the excellent ratio between cost and performance of the whole range.", "grpatr": "Diameter - D1 (mm)|Diameter - D2 (mm)|Length - L (mm)|Shaft Diameter - d (mm)|Housing Bore - Dg (mm)", "grpflg": "Y" }, { "clsnam": "1072", "clsnbr": "08010105", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Dryslide®", "catnm3": "TH - Self Lubricating Bushings (Lead Free)", "catnm4": "TS-TH - Flat Strips - Inch Sizes", "catnm5": "", "imgnme": "DMR_TS-TH_FlatStrip_lg.jpg|TS_dim.jpg", "notes": "Flat Strips¶¶Length = 18.00 in¶¶¶A composite structure, TS-TH flat strips consists of a carbon steel backing, an intermediate layer of sintered bronze, PTFE based sliding lining. From a technical point of view, the product is already widely known and new applications are constantly being identified to take advantage of the high load capacity, the self-lubricated feature and the excellent ratio between cost and performance of the whole range.", "grpatr": "Width - S (in)|High - B2 (in)|Length - L (in)", "grpflg": "Y" }, { "clsnam": "1079", "clsnbr": "08010106", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Dryslide®", "catnm3": "TH - Self Lubricating Bushings (Lead Free)", "catnm4": "TS-TH - Flat Strips - Metric Size", "catnm5": "", "imgnme": "DMR_TS-TH_FlatStrip_lg.jpg|TS_dim.jpg", "notes": "Flat Strips¶¶Length = 500.00 mm¶¶¶A composite structure, TS-TH flat strips consists of a carbon steel backing, an intermediate layer of sintered bronze, PTFE based sliding lining. From a technical point of view, the product is already widely known and new applications are constantly being identified to take advantage of the high load capacity, the self-lubricated feature and the excellent ratio between cost and performance of the whole range.", "grpatr": "Width - S (mm)|High - B2 (mm)|Length - L (mm)", "grpflg": "Y" }, { "clsnam": "1076", "clsnbr": "08010107", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Dryslide®", "catnm3": "TH - Self Lubricating Bushings (Lead Free)", "catnm4": "TW-TH - Thrust Washers - Inch Sizes", "catnm5": "", "imgnme": "DMR_TW_Washer_image.jpg|TW_dim.jpg", "notes": "Thrust Washers¶¶Width = 0.0585 \u0026 0.0895 in¶¶Inside Diameter = 0.500 to 2.250 in¶¶Outside Diameter = 0.875 to 3.250 in¶¶¶A composite structure, TW-TH thrust washers consists of a carbon steel backing, an intermediate layer of sintered bronze, PTFE based sliding lining. From a technical point of view, the product is already widely known and new applications are constantly being identified to take advantage of the high load capacity, the self-lubricated feature and the excellent ratio between cost and performance of the whole range.", "grpatr": "Diameter - D4 (in)|Diameter - D5 (in)|Width - S (in)|Dowel Hole - J (in)", "grpflg": "Y" }, { "clsnam": "1080", "clsnbr": "08010108", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Dryslide®", "catnm3": "TH - Self Lubricating Bushings (Lead Free)", "catnm4": "TW-TH - Thrust Washers - Metric Sizes", "catnm5": "", "imgnme": "DMR_TW_Washer_image.jpg|TW_dim.jpg", "notes": "Thrust Washers¶¶Width = 1.450 \u0026 1.950 mm¶¶Inside Diameter = 10.00 to 62.00 mm¶¶Outside Diameter = 20.00 to 90.00 mm¶¶¶A composite structure, TW-TH thrust washer consists of a carbon steel backing, an intermediate layer of sintered bronze, PTFE based sliding lining. From a technical point of view, the product is already widely known and new applications are constantly being identified to take advantage of the high load capacity, the self-lubricated feature and the excellent ratio between cost and performance of the whole range.", "grpatr": "Diameter - D4 (mm)|Diameter - D5 (mm)|Width - S (mm)|Dowel Hole - J (mm))", "grpflg": "Y" }, { "clsnam": "1074", "clsnbr": "080102", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Dryslide®", "catnm3": "THX - Pre-Lubricating Bushings", "catnm4": "", "catnm5": "", "imgnme": "DMR_THX_300x300.jpg", "notes": "The THX Series has a composite structure consisiting of a carbon steel backing onto which a porous layer of bronze is sintered and then impregnated with a co-acetal plastic. The polymeric surface has indentations in which the lubricating grease lies and protects the mating surface. Available in inch sizes.¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1081", "clsnbr": "08010201", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Dryslide®", "catnm3": "THX - Pre-Lubricating Bushings", "catnm4": "THX - Sleeve Bushings - Inch Sizes (DXR)", "catnm5": "", "imgnme": "DMR_THX_300x300.jpg|THX_dim.jpg", "notes": "The THX trademark denotes a range of sliding cylindrical bushings produced from a material with a composite structure. The backing consists of carbon steel onto which a porous layer of bronze is sintered and then impregnated with a co-acetal plastic. The polymeric surface has indentations in which the lubricating grease lies and protects the mating surface. The main products in the THX range are the cylindrical bushings, as well as special parts made to customer specifications.¶¶THX is equivalent to DXR¶¶Length = 0.375 to 3.000 in¶¶Shaft Diameter = 0.499 to 3.000 in¶¶", "grpatr": "Diameter - D1 (in)|Diameter - D6 (in)|Length - L (in)|Shaft Diameter - d (in)|Housing Bore - Dg (in)", "grpflg": "Y" }, { "clsnam": "1864", "clsnbr": "08010202", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Dryslide®", "catnm3": "THX - Pre-Lubricating Bushings", "catnm4": "THX - Sleeve Bushings - Metric Sizes", "catnm5": "", "imgnme": "DMR_THX_300x300.jpg|THX_dim.jpg", "notes": "\u003CSPAN class=text1\u003ELength = 8 mm to 120 mm \u003CBR\u003EShaft Diameter = 8mm to 300 mm \u003CBR\u003E\u003CBR\u003EThe THX trademark denotes a range of sliding cylindrical bushings produced from a material with a composite structure. The backing consists of carbon steel onto which a porous layer of bronze is sintered and then impregnated with a co-acetal plastic. The polymeric surface has indentations in which the lubricating grease lies and protects the mating surface. The main products in the THX range are the cylindrical bushings (DIN 1494), as well as special parts made to customer specifications.\u003C/SPAN\u003E\u003CBR\u003E", "grpatr": "Diameter - D1 (mm)|Diameter - D2 (mm)|Length - L (mm)|Shaft Diameter - d (mm)|Housing Bore - Dg (mm)", "grpflg": "Y" }, { "clsnam": "BBDTHXDSB2819", "clsnbr": "08010203", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Dryslide®", "catnm3": "THX - Pre-Lubricating Bushings", "catnm4": "THXD - Sleeve Bushings - Inch Sizes (DX)", "catnm5": "", "imgnme": "DMR_THX_300x300.jpg|THX_dim.jpg", "notes": "The THXD trademark denotes a range of sliding cylindrical bushings produced from a material with a composite structure. The backing consists of carbon steel onto which a porous layer of bronze is sintered and then impregnated with a co-acetal plastic. The polymeric surface has indentations in which the lubricating grease lies and protects the mating surface. The main products in the THX range are the cylindrical bushings (DIN 1494), as well as special parts made to customer specifications.¶¶THXD is equivalent to DX¶¶Length = 0.375 to 3.000 in¶¶Shaft Diameter = 0.499 to 3.000 in¶¶¶", "grpatr": "Diameter - D1 (in)|Diameter - D6 (in)|Length - L (in)|Shaft Diameter - d (in)|Housing Bore - Dg (in)", "grpflg": "Y" }, { "clsnam": "1082", "clsnbr": "08010204", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Dryslide®", "catnm3": "THX - Pre-Lubricating Bushings", "catnm4": "TW-THX - Thrust Washers - Inch Sizes", "catnm5": "", "imgnme": "TW-THX_ThrustWasher_01.jpg|TW_THX_dim.jpg", "notes": "THX Thrust Washers¶¶Width = 0.0625 \u0026 0.0895 in¶¶Inside Diameter = 0.625 to 2.250 in¶¶Outside Diameter = 1.125 to 3.250 in¶¶¶¶The TW trademark denotes a range of thrust washers produced from a material with a composite structure. The backing consists of carbon steel onto which a porous layer of bronze is sintered and then impregnated with a co-acetal plastic. The polymeric surface has indentations in which the lubricating grease lies and protects the mating surface.", "grpatr": "Diameter - D4 (in)|Diameter - D5 (in)|Width - S (in)|Dowel Hole - J (in)", "grpflg": "Y" }, { "clsnam": "1044", "clsnbr": "0802", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Fiber-Lube®", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "lg_fiber_lube.jpg", "notes": "A Series of composite bushings that allow true self lubrication. Ideal for long-term highly loaded applications. Additional benefits include: low friction values and resistance to corrosion.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1942", "clsnbr": "080201", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Fiber-Lube®", "catnm3": "Fiber-Lube® - Inch Sizes", "catnm4": "", "catnm5": "", "imgnme": "lg_fiber_lube.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003EStandard Sizes for Fiber-Lube Bearings: 1/16,1/8,1/4 inch Wall Dimensions\u003C/SPAN\u003E\u003CBR\u003E\u003C/P\u003E\u003CP\u003EExample of P/N: FL14F16-24-XXX (ID 0.875\u0022 x OD 1.000\u0022 x Length 1.500\u0022)\u003C/P\u003E\u003CP\u003EIdentification: FL (Fibre Lube) \u003C/P\u003E\u003CP\u003EID: XX\u003C/P\u003E\u003CP\u003ESelected Liner: T= Tape F= Fibre\u003C/P\u003E\u003CP\u003EOD: XX\u003C/P\u003E\u003CP\u003ELength: XX\u003C/P\u003E\u003CP\u003EStyle: XXX (CJ, FCJ, MRP)\u003C/P\u003E\u003CP\u003EAll measurements are in inches.\u003CBR\u003E\u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1944", "clsnbr": "08020101", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Fiber-Lube®", "catnm3": "Fiber-Lube® - Inch Sizes", "catnm4": "FL Sleeve Bushings 1/16\u0022 Wall Thickness", "catnm5": "", "imgnme": "lg_fiber_lube.jpg", "notes": "\u003CSPAN class=text1\u003E \u003CP\u003E\u003CSPAN class=text1\u003EStandard Sizes for Fiber-Lube Bearings: 1/16 inch Thin Wall Dimensions\u003C/SPAN\u003E\u003CBR\u003E\u003C/P\u003E\u003CP\u003EExample of P/N: FL14F16-24-XXX (ID 0.875\u0022 x OD 1.000\u0022 x Length 1.500\u0022)\u003C/P\u003E\u003CP\u003EIdentification: FL (Fibre Lube) \u003C/P\u003E\u003CP\u003EID: XX\u003C/P\u003E\u003CP\u003ESelected Liner: T= Tape F= Fibre\u003C/P\u003E\u003CP\u003EOD: XX\u003C/P\u003E\u003CP\u003ELength: XX (measured in 16ths)\u003C/P\u003E\u003CP\u003EStyle: XXX (CJ, FCJ, MRP)\u003C/P\u003E\u003CP\u003EAll measurements are in inches\u003C/P\u003E\u003CP\u003ELength tolerance is +-.005\u0022 up to 2-1/2\u0022 I.D. ; +.008/-.007\u0022 on I.D. 2-1/2\u0022 and over. Sizes not listed may be quoted upon request subject to minimums.\u003C/P\u003E\u003C/SPAN\u003E", "grpatr": "Nominal Size I.D. (in)|I.D. (in)|O.D. (in)|Length (in)", "grpflg": "Y" }, { "clsnam": "1948", "clsnbr": "08020102", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Fiber-Lube®", "catnm3": "Fiber-Lube® - Inch Sizes", "catnm4": "FL Sleeve Bushings 1/4\u0022 Heavy Wall Thickness", "catnm5": "", "imgnme": "lg_fiber_lube.jpg", "notes": "\u003CSPAN class=text1\u003E \u003CP\u003E\u003CSPAN class=text1\u003EStandard Sizes for Fiber-Lube Bearings: 1/4 inch Standard Wall Dimensions\u003C/SPAN\u003E\u003CBR\u003E\u003C/P\u003E\u003CP\u003EExample of P/N: FL14F16-24-XXX (ID 0.875\u0022 x OD 1.000\u0022 x Length 1.500\u0022)\u003C/P\u003E\u003CP\u003EIdentification: FL (Fibre Lube) \u003C/P\u003E\u003CP\u003EID: XX\u003C/P\u003E\u003CP\u003ESelected Liner: T= Tape F= Fibre\u003C/P\u003E\u003CP\u003EOD: XX\u003C/P\u003E\u003CP\u003ELength: XX\u003C/P\u003E\u003CP\u003EStyle: XXX (CJ, FCJ, MRP)\u003C/P\u003E\u003CP\u003EAll measurements are in inches\u003C/P\u003E\u003CP\u003ELength tolerance is +-.005\u0022 up to 2-1/2\u0022 I.D. ; +.008/-.007\u0022 on I.D. 2-1/2\u0022 and over. Sizes not listed may be quoted upon request subject to minimums.\u003C/P\u003E\u003C/SPAN\u003E", "grpatr": "Nominal Size I.D. (in)|I.D. (in)|O.D. (in)|Length (in)", "grpflg": "Y" }, { "clsnam": "1946", "clsnbr": "08020103", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Fiber-Lube®", "catnm3": "Fiber-Lube® - Inch Sizes", "catnm4": "FL Sleeve Bushings 1/8\u0022 Wall Thickness", "catnm5": "", "imgnme": "lg_fiber_lube.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003EStandard Sizes for Fiber-Lube Bearings: 1/8 inch Standard Wall Dimensions\u003C/SPAN\u003E\u003CBR\u003E\u003C/P\u003E\u003CP\u003EExample of P/N: FL14F16-24-XXX (ID 0.875\u0022 x OD 1.000\u0022 x Length 1.500\u0022)\u003C/P\u003E\u003CP\u003EIdentification: FL (Fibre Lube) \u003C/P\u003E\u003CP\u003EID: XX\u003C/P\u003E\u003CP\u003ESelected Liner: T= Tape F= Fibre\u003C/P\u003E\u003CP\u003EOD: XX\u003C/P\u003E\u003CP\u003ELength: XX (are measured in 16ths)\u003C/P\u003E\u003CP\u003EStyle: XXX (CJ, FCJ, MRP)\u003C/P\u003E\u003CP\u003EAll measurements are in inches\u003C/P\u003E\u003CP\u003ELength tolerance is +-.005\u0022 up to 2-1/2\u0022 I.D. ; +.008/-.007\u0022 on I.D. 2-1/2\u0022 and over. Sizes not listed may be quoted upon request subject to minimums.\u003C/P\u003E", "grpatr": "Nominal Size I.D. (in)|I.D. (in)|O.D. (in)|Length (in)", "grpflg": "Y" }, { "clsnam": "1949", "clsnbr": "080202", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Fiber-Lube®", "catnm3": "Fiber-Lube® - Metric Sizes", "catnm4": "", "catnm5": "", "imgnme": "lg_fiber_lube.jpg", "notes": "\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003EStandard Sizes for Fiber-Lube Bearings: 2.5mm/5mm Wall Dimensions\u003C/SPAN\u003E\u003CBR\u003E\u003CP\u003EExample of P/N: FLM040F048-40-XXX (ID 40mm x OD 48mm x Length 40mm)\u003C/P\u003E\u003CP\u003EIdentification: FL (Fibre Lube) \u003C/P\u003E\u003CP\u003EID: XX\u003C/P\u003E\u003CP\u003ESelected Liner: T= Tape F= Fibre\u003C/P\u003E\u003CP\u003EOD: XX\u003C/P\u003E\u003CP\u003ELength: XX\u003C/P\u003E\u003CP\u003EStyle: XXX (CJ, FCJ, MRP)\u003C/P\u003E\u003CP\u003EAll measurements are in millimeters.\u003C/P\u003E\u003C/SPAN\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1952", "clsnbr": "08020201", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Fiber-Lube®", "catnm3": "Fiber-Lube® - Metric Sizes", "catnm4": "Standard Sizes for Fiber-Lube Bearings 2.5 mm Wall", "catnm5": "", "imgnme": "lg_fiber_lube.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003EStandard Sizes for Fiber-Lube Bearings: 2.5 mm Wall Dimensions\u003C/SPAN\u003E\u003CBR\u003E\u003C/P\u003E\u003CP\u003EExample of P/N: FLM040F048-40-XXX (ID 40mm x OD 48mm x Length 40mm)\u003C/P\u003E\u003CP\u003EIdentification: FL (Fibre Lube) \u003C/P\u003E\u003CP\u003EID: XX\u003C/P\u003E\u003CP\u003ESelected Liner: T= Tape F= Fibre\u003C/P\u003E\u003CP\u003EOD: XX\u003C/P\u003E\u003CP\u003ELength: XX\u003C/P\u003E\u003CP\u003EStyle: XXX (CJ, FCJ, MRP)\u003C/P\u003E\u003CP\u003EAll measurements are in millimeters.\u003C/P\u003E\u003CP\u003ELength tolerance: +0/-.25 mm for I.D. up to and including 55 mm, +0/-.40 mm for I.D. 60 mm and larger. Sizes not listed may be quoted , subject to minimums.\u003C/P\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E", "grpatr": "Nominal Size I.D. (mm)|I.D. (mm)|O.D. (mm)|Length (mm)", "grpflg": "Y" }, { "clsnam": "1953", "clsnbr": "08020202", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Fiber-Lube®", "catnm3": "Fiber-Lube® - Metric Sizes", "catnm4": "Standard Sizes for Fiber-Lube Bearings: 5 mm Wall", "catnm5": "", "imgnme": "lg_fiber_lube.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003EStandard Sizes for Fiber-Lube Bearings: 5 mm Wall Dimensions\u003C/SPAN\u003E\u003CBR\u003E\u003C/P\u003E\u003CP\u003EExample of P/N: FLM040F048-40-XXX (ID 40mm x OD 48mm x Length 40mm)\u003C/P\u003E\u003CP\u003EIdentification: FL (Fibre Lube) \u003C/P\u003E\u003CP\u003EID: XX\u003C/P\u003E\u003CP\u003ESelected Liner: T= Tape F= Fibre\u003C/P\u003E\u003CP\u003EOD: XX\u003C/P\u003E\u003CP\u003ELength: XX\u003C/P\u003E\u003CP\u003EStyle: XXX (CJ, FCJ, MRP)\u003C/P\u003E\u003CP\u003EAll measurements are in millimeters.\u003C/P\u003E\u003CP\u003ELength tolerance: +0/-.25 mm for I.D. up to and including 55 mm, +0/-.40 mm for I.D. 60 mm and larger. Sizes not listed may be quoted , subject to minimums.\u003C/P\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E", "grpatr": "Nominal Size I.D. (mm)|I.D. (mm)|O.D. (mm)|Length (mm)", "grpflg": "Y" }, { "clsnam": "1845", "clsnbr": "0803", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_LinearMotionBearings.jpg", "notes": "\u003CSPAN class=text1\u003EOne piece drop-in replacement for rolling element bushings. Line to line contact eliminates brinelling and runs quietly. Well suited for applications with simultaneous linear, oscillating and rotary motion.\u003C/SPAN\u003E\u003CBR\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1881", "clsnbr": "080301", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Ceramic Coated Bearing Series Black Racer", "catnm4": "", "catnm5": "", "imgnme": "sm_ceramic_coated_bearings-01.jpg", "notes": "\u003CP style=\u0022MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px\u0022\u003EBlack Racer, Ceramic Coated Linear Bearings\u003C/P\u003E¶\u003CP style=\u0022MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px\u0022\u003EThe \u0022original\u0022 drop-in replacement for linear ball bearings in 1976. Ceramic Coated Linear Bearings feature a file hard, RC89 coating over an aluminum substrate. This bearing requires lubrication, light oil is sufficient, and has broken all test records for linear feet of travel: 100 million!\u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1940", "clsnbr": "08030101", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Ceramic Coated Bearing Series Black Racer", "catnm4": "Ceramic Flange Blocks", "catnm5": "", "imgnme": "sm_minuteman_flange_block_01.jpg", "notes": "\u003CP align=left\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EFully Interchangeable with standard ball bushing flange blocks \u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E¶\u003CP align=left\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003CSPAN lang=en-us\u003E\u003CSPAN lang=en-us\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003CFONT face=Arial\u003EBLACK RACER Ceramic Coated Linear Bearings® REQUIRE LUBRICATION! \u003CBR\u003E\u003C/FONT\u003E\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E¶\u003CP align=left\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EPart Number Sample For 3/4\u0022 ID Self Lubricating Block.\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E¶\u003CP align=left\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003CBR\u003EFor Self-Aligning Bearing add (SA) to Part Number \u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E", "grpatr": "Shaft Diameter - Nom. (in)|A (in)|C (in)|Bolt - F (in)|Hole - F (in)", "grpflg": "Y" }, { "clsnam": "1936", "clsnbr": "08030102", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Ceramic Coated Bearing Series Black Racer", "catnm4": "Ceramic Inch Closed Single Pillow Blocks", "catnm5": "", "imgnme": "sm_minuteman_inch-closed_single_pillowblock_01.jpg", "notes": "\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003ELM76 Linear Motion Bearings are direct drop-in replacements for linear ball bearings \u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E¶\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003CSPAN lang=en-us\u003E\u003CSPAN lang=en-us\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003CFONT face=Arial\u003EBLACK RACER Ceramic Coated Linear Bearings® REQUIRE LUBRICATION!\u003C/FONT\u003E\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E¶\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EOrdering P/N sample: 1/4\u0022 Closed Pillow Block .\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E¶\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EFor self Aligning Bearing Add (SA) to P/N\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E", "grpatr": "Shaft Diam. Nom. (in)|C (in)|G (in)|Bolt/Hole (in)|K (in)|L- Min. (in)|M- Min. (in)|Housing Bore (in)", "grpflg": "Y" }, { "clsnam": "1938", "clsnbr": "08030103", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Ceramic Coated Bearing Series Black Racer", "catnm4": "Ceramic Inch Closed/Twin Pillow Blocks", "catnm5": "", "imgnme": "sm_minuteman_inch-closed_twin_pillowblock_01.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003ELM76 Linear Motion Bearings are direct drop-in replacements for linear ball bearings \u003C/SPAN\u003E\u003C/FONT\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003CSPAN lang=en-us\u003E\u003CSPAN lang=en-us\u003E\u003CSPAN lang=en-us\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003CFONT face=Arial\u003EBLACK RACER Ceramic Coated Linear Bearings® REQUIRE LUBRICATION!\u003C/FONT\u003E\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EOrdering P/N sample: 1/4\u0022 Closed Pillow Block .\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EFor self Aligning Bearing Add (SA) to P/N\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E", "grpatr": "Working Bore - A Inches (in)|C (in)|G (in)|Bolt (in)|Hole (in)|J- Min. (in)|M (in)", "grpflg": "Y" }, { "clsnam": "1937", "clsnbr": "08030104", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Ceramic Coated Bearing Series Black Racer", "catnm4": "Ceramic Inch Open/Single Pillow Blocks", "catnm5": "", "imgnme": "sm_minuteman_inch-open_single_pillowblock_01.jpg", "notes": "\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003ELM76 Linear Motion Bearings are direct drop-in replacements for linear ball bearings \u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003CSPAN lang=en-us\u003E\u003CSPAN lang=en-us\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003CFONT face=Arial\u003EBLACK RACER Ceramic Coated Linear Bearings® REQUIRE LUBRICATION!\u003CBR\u003E\u003C/FONT\u003E\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EOrdering P/N sample: 1/4\u0022 Open Pillow Block .\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EFor self Aligning Bearing Add (SA) to P/N\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E", "grpatr": "Shaft Diam. Nom. (in)|C (in)|G (in)|Bolt/Hole (in)|K (in)|L- Min. (in)|M- Min. (in)|Housing Bore (in)", "grpflg": "Y" }, { "clsnam": "1939", "clsnbr": "08030105", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Ceramic Coated Bearing Series Black Racer", "catnm4": "Ceramic Inch Open/Twin Pillow Blocks", "catnm5": "", "imgnme": "sm_minuteman_inch-open_twin_pillowblock_01.jpg", "notes": "\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003ELM76 Linear Motion Bearings are direct drop-in replacements for linear ball bearings \u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003CSPAN lang=en-us\u003E\u003CSPAN lang=en-us\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003CFONT face=Arial\u003EBLACK RACER Ceramic Coated Linear Bearings® REQUIRE LUBRICATION!\u003C/FONT\u003E\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EOrdering P/N sample: 1/4\u0022 Open Pillow Block .\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EFor self Aligning Bearing Add (SA) to P/N\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E", "grpatr": "Working Bore - A Inches (in)|C (in)|G (in)|Bolt (in)|Hole (in)|J- Min. (in)|M (in)", "grpflg": "Y" }, { "clsnam": "1926", "clsnbr": "08030106", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Ceramic Coated Bearing Series Black Racer", "catnm4": "Ceramic Open and Closed Bearings", "catnm5": "", "imgnme": "sm_minuteman_open-closed_bearing_01.jpg", "notes": "\u003CP style=\u0022MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px\u0022 class=body\u003E\u003CSPAN style=\u0022MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px\u0022 class=body\u003EBlack Racer Ceramic Coated Linear Bearings offer a 1 piece design employing a file hard (FDA Compliant) ceramic coating over an aluminum shell. Black Racer Bearings require lubrication and must be run on case hardened shafting: Rc60 Steel or 440c Stainless.\u003C/SPAN\u003E\u003C/P\u003E\u003CP style=\u0022MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px\u0022 class=body\u003E\u003CSPAN style=\u0022MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px\u0022 class=body\u003E\u003C/SPAN\u003E \u003C/P\u003E\u003CP style=\u0022MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px\u0022 class=body\u003E\u003CSPAN style=\u0022MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px\u0022 class=body\u003ENominal bearing sizes ranging from 1/4\u0022 up to 4\u0022. \u003C/SPAN\u003EOpen and closed styles with self aligning feature available (SA).\u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "2018", "clsnbr": "0803010601", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Ceramic Coated Bearing Series Black Racer", "catnm4": "Ceramic Open and Closed Bearings", "catnm5": "Minuteman Ceramic Open/Closed Linear Bearings Euro", "imgnme": "sm_minuteman_open-closed_bearing_01.jpg", "notes": "\u003Cp\u003E\u003Cspan style=\u0022font-family: Arial;\u0022 face=\u0022Arial\u0022\u003E\u003Cspan lang=\u0022en-us\u0022\u003ELM76 Linear Motion Bearings are direct drop-in replacements for linear ball bearings.\u003C/span\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-family: Arial;\u0022 face=\u0022Arial\u0022\u003E\u003Cspan lang=\u0022en-us\u0022\u003E\u003Cspan lang=\u0022en-us\u0022\u003E\u003Cspan style=\u0022font-family: Arial;\u0022 face=\u0022Arial\u0022\u003E\u003Cspan lang=\u0022en-us\u0022\u003E\u003Cspan style=\u0022font-family: Arial;\u0022 face=\u0022Arial\u0022\u003EBLACK RACER Ceramic Coated Linear Bearing® REQUIRE LUBRICATION!\u003Cstrong\u003E \u003C/strong\u003E\u003Cbr /\u003E\u003C/span\u003E\u003C/span\u003E\u003C/span\u003E\u003C/span\u003E\u003C/span\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-family: Arial;\u0022 face=\u0022Arial\u0022\u003E\u003Cspan lang=\u0022en-us\u0022\u003ELX P/N are Open Bearings \u003C/span\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-family: Arial;\u0022 face=\u0022Arial\u0022\u003E\u003Cspan lang=\u0022en-us\u0022\u003EL P/N are Closed Bearings \u003C/span\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-family: Arial;\u0022 face=\u0022Arial\u0022\u003E\u003Cspan lang=\u0022en-us\u0022\u003EFor Self Lubricating Bearings\u003Cstrong\u003E \u003C/strong\u003Euse suffix SL eg. L25SL\u003C/span\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-family: Arial;\u0022 face=\u0022Arial\u0022\u003E\u003Cspan lang=\u0022en-us\u0022\u003EFor Self Aligning Bearings\u003Cstrong\u003E \u003C/strong\u003Euse suffix SA eg. L25SA\u003C/span\u003E\u003C/span\u003E\u003C/p\u003E", "grpatr": "Working Bore - A (mm)|Max Shaft Diam. - h6 or h7 (mm)|Housing Bore Dima. - H7 (mm)", "grpflg": "Y" }, { "clsnam": "1935", "clsnbr": "0803010602", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Ceramic Coated Bearing Series Black Racer", "catnm4": "Ceramic Open and Closed Bearings", "catnm5": "Minuteman Ceramic Open/Closed Linear Bearings Inch", "imgnme": "sm_minuteman_open-closed_bearing_01.jpg", "notes": "\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003ELM76 Linear Motion Bearings are direct drop-in replacements for linear ball bearings.\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E¶\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003CSPAN lang=en-us\u003E\u003CFONT face=Arial\u003EBLACK RACER Ceramic Coated Linear Bearings® REQUIRE LUBRICATION! \u003CBR\u003E\u003C/FONT\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/FONT\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E¶\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003ELX P/N are Open Bearings \u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E¶\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EL P/N are Closed Bearings \u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E¶\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EFor Self Aligning Bearings\u003CSTRONG\u003E \u003C/STRONG\u003Euse prefix SA\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E", "grpatr": "Working Bore - A (in)|Outside Diameter - B (in)|Length - C (in)|Max Shaft Diam. (in)|Housing Bore (in)", "grpflg": "Y" }, { "clsnam": "1941", "clsnbr": "08030107", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Ceramic Coated Bearing Series Black Racer", "catnm4": "Ceramic TWM Bearings", "catnm5": "", "imgnme": "DMR_LM76_CeramicTWM_2_Bearing_500x500.jpg|DMR_LM76_CeramicTWM_2_Bearing_Dimensions_500x400.jpg", "notes": "\u003CSPAN lang=en-us\u003E\u003CFONT size=4 face=Arial\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003CSPAN lang=en-us\u003E\u003CSPAN lang=en-us\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003CFONT face=Arial\u003EBLACK RACER Ceramic Coated Linear Bearings® REQUIRE LUBRICATION!\u003C/FONT\u003E\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003C/FONT\u003E\u003C/SPAN\u003E\u003CP\u003E\u003CSPAN lang=en-us\u003E\u003CFONT size=4 face=Arial\u003EPart Number Example for a\u003CSTRONG\u003E L *\u003C/STRONG\u003E \u003CSTRONG\u003ETWM\u003C/STRONG\u003E Bearing \u003C/FONT\u003E\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN lang=en-us\u003E\u003CSPAN lang=en-us\u003E\u003CFONT size=4 face=Arial\u003EPart Number Example for a L*\u003CSTRONG\u003ETWM FDA/USDA\u003C/STRONG\u003E Compliant Bearing\u003C/FONT\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN lang=en-us\u003E\u003CSPAN lang=en-us\u003E\u003CFONT size=4 face=Arial\u003EWhite FDA/USDA teflon linear in a ceramic coated FDA/USDA compliant\u003C/FONT\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Working Bore - A (mm)|Outside Diameter - B (mm)|Length h14 Tolerance - C (mm)|Max Shaft Diam. - h6 or h7 (mm)|Housing Bore Dima. - H7 (mm)", "grpflg": "Y" }, { "clsnam": "1902", "clsnbr": "080302", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Self-Lubricating Linear Bearings", "catnm4": "", "catnm5": "", "imgnme": "sm_minuteman_bearings-01.jpg", "notes": "\u003CP style=\u0022MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px\u0022 class=body\u003E\u003CSPAN style=\u0022MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px\u0022 class=body\u003EThe LM76 Minuteman Self Lubricating Linear bearings, \u003C/SPAN\u003Epillow blocks and flange blocks are direct drop-in replacements for linear ball bearings. Minuteman bearings are self lubricating and because the PTFE Composite has no abrasive fillers, it can run on RC60, soft 300 series stainless and aluminum.\u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1923", "clsnbr": "08030201", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Self-Lubricating Linear Bearings", "catnm4": "Flange Blocks", "catnm5": "", "imgnme": "sm_minuteman_flange_block_01.jpg", "notes": "\u003CP align=left\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EFully Interchangeable with standard ball bushing flange blocks \u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E¶\u003CP align=left\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EPart Number Sample For 3/4\u0022 ID Self Lubricating Block.\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E¶\u003CP align=left\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003CBR\u003EFor Self-Aligning Bearing add (SA) to Part Number \u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E", "grpatr": "Shaft Diameter - Nom. (in)|A (in)|C (in)|Bolt - F (in)|Hole - F (in)", "grpflg": "Y" }, { "clsnam": "1914", "clsnbr": "08030202", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Self-Lubricating Linear Bearings", "catnm4": "Inch Closed Single Pillow Blocks", "catnm5": "", "imgnme": "sm_minuteman_inch-closed_single_pillowblock_01.jpg", "notes": "\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003ELM76 Linear Motion Bearings are direct drop-in replacements for linear ball bearings \u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EOrdering P/N sample: 1/4\u0022 Closed Pillow Block .\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EFor self Aligning Bearing Add (SA) to P/N\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003CP align=center\u003E\u003CFONT size=2 face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003CBR\u003E\u003C/SPAN\u003E\u003C/FONT\u003E \u003C/P\u003E\u003C/SPAN\u003E\u003C/FONT\u003E", "grpatr": "Shaft Diam. Nom. (in)|C (in)|G (in)|Bolt/Hole (in)|K (in)|L- Min. (in)|M- Min. (in)|Housing Bore (in)", "grpflg": "Y" }, { "clsnam": "1921", "clsnbr": "08030203", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Self-Lubricating Linear Bearings", "catnm4": "Inch Closed/Twin Pillow Blocks", "catnm5": "", "imgnme": "sm_minuteman_inch-closed_twin_pillowblock_01.jpg", "notes": "\u003CSPAN class=text1\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003ELM76 Linear Motion Bearings are direct drop-in replacements for linear ball bearings \u003C/SPAN\u003E\u003C/FONT\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EOrdering P/N sample: 1/4\u0022 Closed Pillow Block .\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EFor self Aligning Bearing Add (SA) to P/N\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003C/SPAN\u003E", "grpatr": "Working Bore - A Inches (in)|C (in)|G (in)|Bolt (in)|Hole (in)|J- Min. (in)|M (in)", "grpflg": "Y" }, { "clsnam": "1920", "clsnbr": "08030204", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Self-Lubricating Linear Bearings", "catnm4": "Inch Open Single Pillow Blocks", "catnm5": "", "imgnme": "sm_minuteman_inch-open_single_pillowblock_01.jpg", "notes": "\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003ELM76 Linear Motion Bearings are direct drop-in replacements for linear ball bearings \u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EOrdering P/N sample: 1/4\u0022 Open Pillow Block .\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EFor self Aligning Bearing Add (SA) to P/N\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E", "grpatr": "Shaft Diam. Nom. (in)|C (in)|G (in)|Bolt/Hole (in)|K (in)|L- Min. (in)|M- Min. (in)|Housing Bore (in)", "grpflg": "Y" }, { "clsnam": "1922", "clsnbr": "08030205", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Self-Lubricating Linear Bearings", "catnm4": "Inch Open/Twin Pillow Blocks", "catnm5": "", "imgnme": "sm_minuteman_inch-open_twin_pillowblock_01.jpg", "notes": "\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003ELM76 Linear Motion Bearings are direct drop-in replacements for linear ball bearings \u003C/SPAN\u003E\u003C/FONT\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EOrdering P/N sample: 1/4\u0022 Open Pillow Block.\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EFor self Aligning Bearing Add (SA) to P/N\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E", "grpatr": "Working Bore - A Inches (in)|C (in)|G (in)|Bolt (in)|Hole (in)|J- Min. (in)|M (in)", "grpflg": "Y" }, { "clsnam": "1905", "clsnbr": "08030206", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Self-Lubricating Linear Bearings", "catnm4": "Open and Closed Bearings", "catnm5": "", "imgnme": "sm_minuteman_open-closed_bearing_01.jpg", "notes": "\u003CP style=\u0022MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px\u0022 class=body\u003E\u003CSPAN style=\u0022MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px\u0022 class=body\u003ENominal bearing sizes ranging from 1/4\u0022 up to 4\u0022. \u003C/SPAN\u003EOpen and closed styles with self aligning feature available (SA).\u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1917", "clsnbr": "0803020601", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Self-Lubricating Linear Bearings", "catnm4": "Open and Closed Bearings", "catnm5": "Minuteman Self Lubricating Inch Open/Closed", "imgnme": "sm_minuteman_open-closed_bearing_01.jpg|DMR_LM76_Minuteman-Closed-Open_Drawings.jpg", "notes": "\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003ELM76 Linear Motion Bearings are direct drop-in replacements for linear ball bearings.\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003E\u003CSPAN lang=en-us\u003E\u003CFONT face=Arial\u003EMinuteman Self Lubricating Linear Bearings \u003C/FONT\u003E\u003C/SPAN\u003Eare self lubricating and because our PTFE Composite has no abrasive fillers, it can run on RC60, soft 300 series stainless and aluminum.\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003ELX P/N are Open Bearings \u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EL P/N are Closed Bearings \u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E\u003CP\u003E\u003CFONT face=Arial\u003E\u003CSPAN lang=en-us\u003EFor Self Aligning Bearings\u003CSTRONG\u003E \u003C/STRONG\u003Euse prefix SA. Example L1625-18 SLSA\u003C/SPAN\u003E\u003C/FONT\u003E\u003C/P\u003E", "grpatr": "Working Bore - A (in)|Outside Diameter - B (in)|Length - C (in)|Max Shaft Diam. (in)|Housing Bore (in)", "grpflg": "Y" }, { "clsnam": "1925", "clsnbr": "0803020602", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Self-Lubricating Linear Bearings", "catnm4": "Open and Closed Bearings", "catnm5": "Minuteman Self Lubricating Metric Open/Closed", "imgnme": "sm_minuteman_open-closed_bearing_01.jpg", "notes": "\u003Cp\u003E\u003Cspan style=\u0022font-family: Arial;\u0022 face=\u0022Arial\u0022\u003E\u003Cspan lang=\u0022en-us\u0022\u003ELM76 Linear Motion Bearings are direct drop-in replacements for linear ball bearings.\u003C/span\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-family: Arial;\u0022 face=\u0022Arial\u0022\u003E\u003Cspan lang=\u0022en-us\u0022\u003E\u003Cspan lang=\u0022en-us\u0022\u003E\u003Cspan style=\u0022font-family: Arial;\u0022 face=\u0022Arial\u0022\u003EMinuteman Self Lubricating Linear Bearings \u003C/span\u003E\u003C/span\u003Eare self lubricating and because our PTFE Composite has no abrasive fillers, it can run on RC60, soft 300 series stainless and aluminum.\u003C/span\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-family: Arial;\u0022 face=\u0022Arial\u0022\u003E\u003Cspan lang=\u0022en-us\u0022\u003ELX P/N are Open Bearings \u003C/span\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-family: Arial;\u0022 face=\u0022Arial\u0022\u003E\u003Cspan lang=\u0022en-us\u0022\u003EL P/N are Closed Bearings \u003C/span\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-family: Arial;\u0022 face=\u0022Arial\u0022\u003E\u003Cspan lang=\u0022en-us\u0022\u003EFor Self Lubricating Bearings\u003Cstrong\u003E \u003C/strong\u003Euse suffix SL eg. L25SL\u003C/span\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-family: Arial;\u0022 face=\u0022Arial\u0022\u003E\u003Cspan lang=\u0022en-us\u0022\u003EFor Self Aligning Bearings\u003Cstrong\u003E \u003C/strong\u003Euse suffix SA eg. L25SA\u003C/span\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-family: Arial;\u0022 face=\u0022Arial\u0022\u003E\u003Cspan lang=\u0022en-us\u0022\u003EAvailable with or without seals.\u003Cstrong\u003E \u003C/strong\u003E\u003C/span\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-family: Arial;\u0022 face=\u0022Arial\u0022\u003E\u003Cspan lang=\u0022en-us\u0022\u003ECounterbore for seals available on ceramic version only. If seals required for self-lube, consult factory.\u003Cstrong\u003E \u003C/strong\u003E\u003C/span\u003E\u003C/span\u003E\u003C/p\u003E", "grpatr": "Working Bore - A (mm)|Max Shaft Diam. - h6 or h7 (mm)|Housing Bore Dima. - H7 (mm)|Open (LX) Slot Width - E (mm)|Open (LX) Slot Angle - F (mm)", "grpflg": "Y" }, { "clsnam": "1924", "clsnbr": "08030207", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Linear Motion Bearings", "catnm3": "Self-Lubricating Linear Bearings", "catnm4": "Self Lube TWM Bearings", "catnm5": "", "imgnme": "DMR_LM76_TWM-SL_600x600.jpg|TWMSL_DimensionalDawing_400x300.jpg", "notes": "\u003CP\u003ETWM PTFE Self-Lubricating Thin wall Bearings\u003C/P\u003E¶\u003CP\u003EFor Self Lubricating Bearings, add the suffix SL to part number. Example L20TWMSL\u003C/P\u003E", "grpatr": "Working Bore - A (mm)|Outside Diameter - B (mm)|Length h14 Tolerance - C (mm)|Max Shaft Diam. - h6 or h7 (mm)|Housing Bore Dima. - H7 (mm)", "grpflg": "Y" }, { "clsnam": "1220", "clsnbr": "0804", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Powdered Metal Bushings", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_PowderedMetalBusings.jpg", "notes": "Sintered self-lubricated metal bushings reduce costs by allowing longer operating times between maintenance. Formed in various metals including: bronze, iron and other alloys and metals.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1222", "clsnbr": "080401", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Powdered Metal Bushings", "catnm3": "Powdered Metal Flange Bushings", "catnm4": "", "catnm5": "", "imgnme": "DMR_PowderedMetal_Flanged.jpg|DMR_PM_FlangeBushing_Rev-A1.jpg", "notes": "Sintered self-lubricated metal bushings reduce costs by allowing longer operating times between maintenance. Formed in various metals including: bronze, iron and other alloys and metals.", "grpatr": "Nominal Size I.D. (in)|Nominal Size O.D. (in)|Flange O.D. (in)|Length (in)", "grpflg": "Y" }, { "clsnam": "1221", "clsnbr": "080402", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Powdered Metal Bushings", "catnm3": "Powdered Metal Sleeve Bushings", "catnm4": "", "catnm5": "", "imgnme": "DMR_PowderedMetalBusings.jpg|DMR_PM_SleeveBushing_Rev-A1.jpg", "notes": "Sintered self-lubricated metal bushings reduce costs by allowing longer operating times between maintenance. Formed in various metals including: bronze, iron and other alloys and metals.", "grpatr": "Nominal Size I.D. (in)|Nominal Size O.D. (in)|Length (in)", "grpflg": "Y" }, { "clsnam": "1223", "clsnbr": "080403", "catnm1": "Bushings \u0026 Bearings", "catnm2": "Powdered Metal Bushings", "catnm3": "Powdered Metal Thrust Washers", "catnm4": "", "catnm5": "", "imgnme": "DMR_PowderedMetal_Washer.jpg|DMR_PM_ThrustWasher_Rev-A1.jpg", "notes": "Sintered self-lubricated metal bushings reduce costs by allowing longer operating times between maintenance. Formed in various metals including: bronze, iron and other alloys and metals.", "grpatr": "Nominal Size I.D. (in)|Nominal Size O.D. (in)|Length (in)", "grpflg": "Y" }, { "clsnam": "1008", "clsnbr": "09", "catnm1": "Retaining Rings", "catnm2": "", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_RetainingRings_Group_800x800.jpg", "notes": "Simplify your assemblies, reduce costs and decrease material waste by incorporating retaining rings into your designs. Daemar stocks a complete line of retaining rings that perform a range of versatile functions allowing manufacturers to replace more costly components. Our retaining ring product line up includes tapered section, constant section, spiral and self locking retaining rings.", "grpatr": "", "grpflg": "N" }, { "clsnam": "2359", "clsnbr": "0901", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "Daemar_RotorClip-RP300_300x300.jpg", "notes": "Rotor Clip pliers, applicators, dispensers and automatic assembly tools specifcally designed for aiding in the installation of Rotor Clip retaining rings.", "grpatr": "", "grpflg": "N" }, { "clsnam": "2582", "clsnbr": "090101", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Applicators", "catnm4": "", "catnm5": "", "imgnme": "DMR_Applicator-01_300x300.jpg", "notes": "\u003Cp\u003EApplicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring \u0026ldquo;snaps\u0026rdquo; when properly seated in groove.)\u003Cbr /\u003ERing Styles: C,E,BE,RE,PO/POL,DE,DC,ME and JE Retaining Rings.\u003C/p\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "2590", "clsnbr": "09010101", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Applicators", "catnm4": "BE/BSE Ring Applicators", "catnm5": "", "imgnme": "DMR_Applicator-01_300x300.jpg|DMR_Applicator_Profile_.jpg", "notes": "\u003Cp\u003EApplicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring \u0026ldquo;snaps\u0026rdquo; when properly seated in groove.)\u003Cbr /\u003EFor use with Retaining Rings BE/BSE Rings \u003Cbr /\u003E*45 \u0026deg; deg, 90 \u0026deg; deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last \u00220\u0022 of the Applicator designation with a \u00224\u0022(45 \u0026deg;), \u00229\u0022 (90\u0026deg;) or \u00227\u0022 (Offset) \u003Cbr /\u003E(Eg , A-304, A309, A-307 etc.)\u003Cbr /\u003E** Please Wear Protective eyewear while installing and removing retaining ring \u0026 hose clamps.**\u003C/p\u003E", "grpatr": "Ring Size|Blade Width A|Blade Width B|Tip Length C|Offset D|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2585", "clsnbr": "09010102", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Applicators", "catnm4": "C Ring Applicators", "catnm5": "", "imgnme": "DMR_Applicator-01_300x300.jpg|DMR_Applicator_Profile_.jpg", "notes": "\u003Cp\u003EApplicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring \u0026ldquo;snaps\u0026rdquo; when properly seated in groove.)\u003Cbr /\u003EFor use with Retaining Rings C Rings \u003Cbr /\u003E*45 \u0026deg; deg, 90 \u0026deg; deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last \u00220\u0022 of the Applicator designation with a \u00224\u0022(45 \u0026deg;), \u00229\u0022 (90\u0026deg;) or \u00227\u0022 (Offset) \u003Cbr /\u003E(Eg , A-304, A309, A-307 etc.)\u003Cbr /\u003E** Please Wear Protective eyewear while installing and removing retaining ring \u0026 hose clamps.**\u003C/p\u003E", "grpatr": "Ring Size|Blade Width A|Blade Width B|Tip Length C|Offset D|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2591", "clsnbr": "09010103", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Applicators", "catnm4": "DC Ring Applicators", "catnm5": "", "imgnme": "DMR_Applicator-01_300x300.jpg|DMR_Applicator_Profile_.jpg", "notes": "\u003Cp\u003EApplicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring \u0026ldquo;snaps\u0026rdquo; when properly seated in groove.)\u003Cbr /\u003EFor use with Retaining Rings DC Rings \u003Cbr /\u003E*45 \u0026deg; deg, 90 \u0026deg; deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last \u00220\u0022 of the Applicator designation with a \u00224\u0022(45 \u0026deg;), \u00229\u0022 (90\u0026deg;) or \u00227\u0022 (Offset) \u003Cbr /\u003E(Eg , A-304, A309, A-307 etc.)\u003Cbr /\u003E** Please Wear Protective eyewear while installing and removing retaining ring \u0026 hose clamps.**\u003C/p\u003E", "grpatr": "Ring Size|Blade Width A|Blade Width B|Tip Length C|Offset D|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2588", "clsnbr": "09010104", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Applicators", "catnm4": "DE Ring Applicators", "catnm5": "", "imgnme": "DMR_Applicator-01_300x300.jpg|DMR_Applicator_Profile_.jpg", "notes": "\u003Cp\u003EApplicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring \u0026ldquo;snaps\u0026rdquo; when properly seated in groove.)\u003Cbr /\u003EFor use with Retaining Rings DE Rings \u003Cbr /\u003E*45 \u0026deg; deg, 90 \u0026deg; deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last \u00220\u0022 of the Applicator designation with a \u00224\u0022(45 \u0026deg;), \u00229\u0022 (90\u0026deg;) or \u00227\u0022 (Offset) \u003Cbr /\u003E(Eg , A-304, A309, A-307 etc.)\u003Cbr /\u003E** Please Wear Protective eyewear while installing and removing retaining ring \u0026 hose clamps.**\u003C/p\u003E", "grpatr": "Ring Size|Blade Width A|Blade Width B|Tip Length C|Offset D|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2583", "clsnbr": "09010105", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Applicators", "catnm4": "E Ring Applicators", "catnm5": "", "imgnme": "DMR_Applicator-01_300x300.jpg|DMR_Applicator_Profile_.jpg", "notes": "\u003Cp\u003EApplicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring \u0026ldquo;snaps\u0026rdquo; when properly seated in groove.)\u003Cbr /\u003EFor use with Retaining Rings E/SE/YE \u003Cbr /\u003E*45 \u0026deg; deg, 90 \u0026deg; deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last \u00220\u0022 of the Applicator designation with a \u00224\u0022(45 \u0026deg;), \u00229\u0022 (90\u0026deg;) or \u00227\u0022 (Offset) \u003Cbr /\u003E(Eg , A-304, A309, A-307 etc.)\u003Cbr /\u003E** Please Wear Protective eyewear while installing and removing retaining ring \u0026 hose clamps.**\u003C/p\u003E", "grpatr": "Ring Size|Blade Width A|Blade Width B|Tip Length C|Offset D|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2587", "clsnbr": "09010106", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Applicators", "catnm4": "JE Ring Applicators", "catnm5": "", "imgnme": "DMR_Applicator-01_300x300.jpg|DMR_Applicator_Profile_.jpg", "notes": "\u003Cp\u003EApplicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring \u0026ldquo;snaps\u0026rdquo; when properly seated in groove.)\u003Cbr /\u003EFor use with Retaining Rings JE Rings \u003Cbr /\u003E*45 \u0026deg; deg, 90 \u0026deg; deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last \u00220\u0022 of the Applicator designation with a \u00224\u0022(45 \u0026deg;), \u00229\u0022 (90\u0026deg;) or \u00227\u0022 (Offset) \u003Cbr /\u003E(Eg , A-304, A309, A-307 etc.)\u003Cbr /\u003E** Please Wear Protective eyewear while installing and removing retaining ring \u0026 hose clamps.**\u003C/p\u003E", "grpatr": "Ring Size|Blade Width A|Blade Width B|Tip Length C|Offset D|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2589", "clsnbr": "09010107", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Applicators", "catnm4": "ME Ring Applicators", "catnm5": "", "imgnme": "DMR_Applicator-01_300x300.jpg|DMR_Applicator_Profile_.jpg", "notes": "\u003Cp\u003EApplicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring \u0026ldquo;snaps\u0026rdquo; when properly seated in groove.)\u003Cbr /\u003EFor use with Retaining Rings ME Rings \u003Cbr /\u003E*45 \u0026deg; deg, 90 \u0026deg; deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last \u00220\u0022 of the Applicator designation with a \u00224\u0022(45 \u0026deg;), \u00229\u0022 (90\u0026deg;) or \u00227\u0022 (Offset) \u003Cbr /\u003E(Eg , A-304, A309, A-307 etc.)\u003Cbr /\u003E** Please Wear Protective eyewear while installing and removing retaining ring \u0026 hose clamps.**\u003C/p\u003E", "grpatr": "Ring Size|Blade Width A|Blade Width B|Tip Length C|Offset D|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2586", "clsnbr": "09010108", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Applicators", "catnm4": "PO/POL Ring Applicators", "catnm5": "", "imgnme": "DMR_Applicator-01_300x300.jpg|DMR_Applicator_Profile_.jpg", "notes": "\u003Cp\u003EApplicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring \u0026ldquo;snaps\u0026rdquo; when properly seated in groove.)\u003Cbr /\u003EFor use with Retaining Rings PO/POL Rings \u003Cbr /\u003E*45 \u0026deg; deg, 90 \u0026deg; deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last \u00220\u0022 of the Applicator designation with a \u00224\u0022(45 \u0026deg;), \u00229\u0022 (90\u0026deg;) or \u00227\u0022 (Offset) \u003Cbr /\u003E(Eg , A-304, A309, A-307 etc.)\u003Cbr /\u003E** Please Wear Protective eyewear while installing and removing retaining ring \u0026 hose clamps.**\u003C/p\u003E", "grpatr": "Ring Size|Blade Width A|Blade Width B|Tip Length C|Offset D|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2584", "clsnbr": "09010109", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Applicators", "catnm4": "RE Ring Applicators", "catnm5": "", "imgnme": "DMR_Applicator-01_300x300.jpg|DMR_Applicator_Profile_.jpg", "notes": "\u003Cp\u003EApplicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring \u0026ldquo;snaps\u0026rdquo; when properly seated in groove.)\u003Cbr /\u003EFor use with Retaining Rings RE Rings \u003Cbr /\u003E*45 \u0026deg; deg, 90 \u0026deg; deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last \u00220\u0022 of the Applicator designation with a \u00224\u0022(45 \u0026deg;), \u00229\u0022 (90\u0026deg;) or \u00227\u0022 (Offset) \u003Cbr /\u003E(Eg , A-304, A309, A-307 etc.)\u003Cbr /\u003E** Please Wear Protective eyewear while installing and removing retaining ring \u0026 hose clamps.**\u003C/p\u003E", "grpatr": "Ring Size|Blade Width A|Blade Width B|Tip Length C|Offset D|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2592", "clsnbr": "090102", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Convertible Pliers", "catnm4": "", "catnm5": "", "imgnme": "Daemar_RotorClip-RP320_300x300.jpg", "notes": "\u003Cspan style=\u0022font-size: 12.5px; font-family: \u0027Open Sans\u0027; white-space: normal; word-spacing: 0px; text-transform: none; float: none; font-weight: normal; color: #555555; font-style: normal; orphans: 2; widows: 2; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\u0022\u003EConvert quickly and easily from internal to external pliers and back again. This two-in-one capability is cost effective and ideal for handling a variety of applications with a minimum number of tools. Simply move the screw to the other hole and tighten with finger pressure to convert quickly to an internal/external plier.\u003C/span\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "2594", "clsnbr": "09010201", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Convertible Pliers", "catnm4": "External Convertible Pliers", "catnm5": "", "imgnme": "Daemar_RotorClip-RP320_300x300.jpg", "notes": "\u003Cspan style=\u0022font-size: 12.5px; font-family: \u0027Open Sans\u0027; white-space: normal; word-spacing: 0px; text-transform: none; float: none; font-weight: normal; color: #555555; font-style: normal; orphans: 2; widows: 2; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\u0022\u003EConvert quickly and easily from internal to external pliers and back again.This two-in-one capability is cost effective and ideal for handling a variety of applications with a minimum number of tools. Simply move the screw to the other hole and tighten with finger pressure to convert quickly to an internal/external plier.\u003Cbr /\u003EExternal Ring Series : SH,BSH,VSH,SHI,SHR\u003Cbr /\u003E\u003Cbr /\u003E\u003C/span\u003E", "grpatr": "Ring Series -1|Ring Size From IN|Ring Size thru IN|Ring Series -3|Ring Series 4|Plier Tip Style|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2593", "clsnbr": "09010202", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Convertible Pliers", "catnm4": "Internal Convertible Pliers", "catnm5": "", "imgnme": "Daemar_RotorClip-RP320_300x300.jpg", "notes": "\u003Cspan style=\u0022font-size: 12.5px; font-family: \u0027Open Sans\u0027; white-space: normal; word-spacing: 0px; text-transform: none; float: none; font-weight: normal; color: #555555; font-style: normal; orphans: 2; widows: 2; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\u0022\u003EConvert quickly and easily from internal to external pliers and back again. This two-in-one capability is cost effective and ideal for handling a variety of applications with a minimum number of tools. Simply move the screw to the other hole and tighten with finger pressure to convert quickly to an internal/external plier.\u003Cbr /\u003E\u003Cbr /\u003EInternal Ring Series : HO, BHO, VHO, HOI\u003Cbr /\u003E\u003Cbr /\u003E\u003C/span\u003E", "grpatr": "Ring Series -1|Ring Size From IN|Ring Size thru IN|Ring Series 2|Plier Tip Style|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2595", "clsnbr": "090103", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Dispensers", "catnm4": "", "catnm5": "", "imgnme": "DMR_Dispenser-D_300x300.jpg", "notes": "\u003Cspan style=\u0022font-size: 12.5px; font-family: \u0027Open Sans\u0027; white-space: normal; word-spacing: 0px; text-transform: none; float: none; font-weight: normal; color: #555555; font-style: normal; orphans: 2; widows: 2; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\u0022\u003ERetaining ring dispensers feature \u0026ldquo;rail\u0026rdquo; over which a stack of retaining rings can be slipped. Once in position, they can be \u0026ldquo;dispensed\u0026rdquo; one at a time using a retaining ring applicator for ease of installation.\u003Cbr /\u003EFor Ring Series C,E/SE/YE, PO/POL,JE,DC,ME,RE,DE\u003C/span\u003E¶¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "2596", "clsnbr": "09010301", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Dispensers", "catnm4": "Dispensers for C Rings", "catnm5": "", "imgnme": "DMR_Dispenser-D_300x300.jpg", "notes": "\u003Cspan style=\u0022font-size: 12.5px; font-family: \u0027Open Sans\u0027; white-space: normal; word-spacing: 0px; text-transform: none; float: none; font-weight: normal; color: #555555; font-style: normal; orphans: 2; widows: 2; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\u0022\u003ERetaining ring dispensers feature \u0026ldquo;rail\u0026rdquo; over which a stack of retaining rings can be slipped. Once in position, they can be \u0026ldquo;dispensed\u0026rdquo; one at a time using a retaining ring applicator for ease of installation.\u003Cbr /\u003EFor Ring Series C\u003C/span\u003E", "grpatr": "Ring Size|Dispenser Style|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2602", "clsnbr": "09010302", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Dispensers", "catnm4": "Dispensers for DC Rings", "catnm5": "", "imgnme": "DMR_Dispenser-D_300x300.jpg", "notes": "\u003Cspan style=\u0022font-size: 12.5px; font-family: \u0027Open Sans\u0027; white-space: normal; word-spacing: 0px; text-transform: none; float: none; font-weight: normal; color: #555555; font-style: normal; orphans: 2; widows: 2; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\u0022\u003ERetaining ring dispensers feature \u0026ldquo;rail\u0026rdquo; over which a stack of retaining rings can be slipped. Once in position, they can be \u0026ldquo;dispensed\u0026rdquo; one at a time using a retaining ring applicator for ease of installation.\u003Cbr /\u003EFor Ring Series DC\u003C/span\u003E", "grpatr": "Ring Size|Dispenser Style|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2603", "clsnbr": "09010303", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Dispensers", "catnm4": "Dispensers for DE Rings", "catnm5": "", "imgnme": "DMR_Dispenser-D_300x300.jpg", "notes": "\u003Cspan style=\u0022font-size: 12.5px; font-family: \u0027Open Sans\u0027; white-space: normal; word-spacing: 0px; text-transform: none; float: none; font-weight: normal; color: #555555; font-style: normal; orphans: 2; widows: 2; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\u0022\u003ERetaining ring dispensers feature \u0026ldquo;rail\u0026rdquo; over which a stack of retaining rings can be slipped. Once in position, they can be \u0026ldquo;dispensed\u0026rdquo; one at a time using a retaining ring applicator for ease of installation.\u003Cbr /\u003EFor Ring Series DE\u003C/span\u003E", "grpatr": "Ring Size|Dispenser Style|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2597", "clsnbr": "09010304", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Dispensers", "catnm4": "Dispensers for E/SE/YE Rings", "catnm5": "", "imgnme": "DMR_Dispenser-D_300x300.jpg", "notes": "\u003Cspan style=\u0022font-size: 12.5px; font-family: \u0027Open Sans\u0027; white-space: normal; word-spacing: 0px; text-transform: none; float: none; font-weight: normal; color: #555555; font-style: normal; orphans: 2; widows: 2; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\u0022\u003ERetaining ring dispensers feature \u0026ldquo;rail\u0026rdquo; over which a stack of retaining rings can be slipped. Once in position, they can be \u0026ldquo;dispensed\u0026rdquo; one at a time using a retaining ring applicator for ease of installation.\u003Cbr /\u003EFor Ring Series E/SE/YE\u003C/span\u003E", "grpatr": "Ring Size|Dispenser Style|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2599", "clsnbr": "09010305", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Dispensers", "catnm4": "Dispensers for JE Rings", "catnm5": "", "imgnme": "DMR_Dispenser-D_300x300.jpg", "notes": "\u003Cspan style=\u0022font-size: 12.5px; font-family: \u0027Open Sans\u0027; white-space: normal; word-spacing: 0px; text-transform: none; float: none; font-weight: normal; color: #555555; font-style: normal; orphans: 2; widows: 2; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\u0022\u003ERetaining ring dispensers feature \u0026ldquo;rail\u0026rdquo; over which a stack of retaining rings can be slipped. Once in position, they can be \u0026ldquo;dispensed\u0026rdquo; one at a time using a retaining ring applicator for ease of installation.\u003Cbr /\u003EFor Ring Series JE\u003C/span\u003E", "grpatr": "Ring Size|Dispenser Style|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2600", "clsnbr": "09010306", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Dispensers", "catnm4": "Dispensers for ME Rings", "catnm5": "", "imgnme": "DMR_Dispenser-D_300x300.jpg", "notes": "\u003Cspan style=\u0022font-size: 12.5px; font-family: \u0027Open Sans\u0027; white-space: normal; word-spacing: 0px; text-transform: none; float: none; font-weight: normal; color: #555555; font-style: normal; orphans: 2; widows: 2; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\u0022\u003ERetaining ring dispensers feature \u0026ldquo;rail\u0026rdquo; over which a stack of retaining rings can be slipped. Once in position, they can be \u0026ldquo;dispensed\u0026rdquo; one at a time using a retaining ring applicator for ease of installation.\u003Cbr /\u003EFor Ring Series ME\u003C/span\u003E", "grpatr": "Ring Size|Dispenser Style|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2598", "clsnbr": "09010307", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Dispensers", "catnm4": "Dispensers for PO/POL Rings", "catnm5": "", "imgnme": "DMR_Dispenser-D_300x300.jpg", "notes": "\u003Cspan style=\u0022font-size: 12.5px; font-family: \u0027Open Sans\u0027; white-space: normal; word-spacing: 0px; text-transform: none; float: none; font-weight: normal; color: #555555; font-style: normal; orphans: 2; widows: 2; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\u0022\u003ERetaining ring dispensers feature \u0026ldquo;rail\u0026rdquo; over which a stack of retaining rings can be slipped. Once in position, they can be \u0026ldquo;dispensed\u0026rdquo; one at a time using a retaining ring applicator for ease of installation.\u003Cbr /\u003EFor Ring Series PO/POL\u003C/span\u003E", "grpatr": "Ring Size|Dispenser Style|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2601", "clsnbr": "09010308", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Dispensers", "catnm4": "Dispensers for RE Rings", "catnm5": "", "imgnme": "DMR_Dispenser-D_300x300.jpg", "notes": "\u003Cspan style=\u0022font-size: 12.5px; font-family: \u0027Open Sans\u0027; white-space: normal; word-spacing: 0px; text-transform: none; float: none; font-weight: normal; color: #555555; font-style: normal; orphans: 2; widows: 2; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px;\u0022\u003ERetaining ring dispensers feature \u0026ldquo;rail\u0026rdquo; over which a stack of retaining rings can be slipped. Once in position, they can be \u0026ldquo;dispensed\u0026rdquo; one at a time using a retaining ring applicator for ease of installation.\u003Cbr /\u003EFor Ring Series RE\u003C/span\u003E", "grpatr": "Ring Size|Dispenser Style|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2578", "clsnbr": "090104", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Heavy-Duty Pliers \u0026 Grip Pliers", "catnm4": "", "catnm5": "", "imgnme": "Daemar_RotorClip-RPN-HeavyDuty_300x300.jpg", "notes": "\u003Cp align=\u0022left\u0022\u003E\u003Cstrong\u003EHeavy-Duty Retaining Ring Pliers\u003C/strong\u003E \u003Cbr /\u003EAre designed to perform with excessive use \u0026ndash; up to 10 times longer than standard retaining ring pliers. The pliers are made of forged Chrome Vanadium steel, and the handles have a non-slip plastic coating.\u003Cbr /\u003E\u003Cbr /\u003EInch \u0026 Metric , Internal \u0026 External Heavy-Duty Pliers \u003Cbr /\u003EInternal : HO, HOI, DHO, DHT, MHO \u003Cbr /\u003EExternal SH. SHR, SHI, SHR, DSH, DST, MSH \u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cstrong\u003EGrip Ring Retaining Ring Pliers \u003Cbr /\u003E\u003C/strong\u003EGrip Ring Pliers are designed for SHF \u0026 DSF external (shaft) friction rings. The pliers are made of forged Chrome Vanadium steel with nonslip solid tips, and the handles have a non-slip plastic coating. Features a stop spring to prevent overspreading of the retaining ring.\u003Cbr /\u003EInch \u0026 Metric Series \u003Cbr /\u003EExternal: SHF\u003C/p\u003E¶\u003Cp align=\u0022left\u0022\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: xx-small; font-family: Swiss721BT-RomanCondensed;\u0022 size=\u00221\u0022 face=\u0022Swiss721BT-RomanCondensed\u0022\u003E\u003Cspan style=\u0022font-size: xx-small; font-family: Swiss721BT-RomanCondensed;\u0022 size=\u00221\u0022 face=\u0022Swiss721BT-RomanCondensed\u0022\u003E\u003C/span\u003E\u003C/span\u003E \u003C/p\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "2580", "clsnbr": "09010401", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Heavy-Duty Pliers \u0026 Grip Pliers", "catnm4": "External Heavy Duty Pliers", "catnm5": "", "imgnme": "Daemar_RotorClip-RPN-HeavyDuty_300x300.jpg", "notes": "\u003Cstrong\u003EExternal Heavy Duty Pliers\u003C/strong\u003E \u003Cbr /\u003EInch \u0026 Metric \u003Cbr /\u003E\u003Cbr /\u003EHeavy-Duty Retaining Ring Pliers are designed to perform with excessive use \u0026ndash; up to 10 times longer than standard retaining ring pliers. The pliers are made of forged Chrome Vanadium steel, and the handles have a non-slip plastic coating.\u003Cbr /\u003E\u003Cbr /\u003EExternal Series: SH,SHR,SHI,DSH,DST,MSH", "grpatr": "Ring Series|Ring Size From IN|Ring Size thru IN|Ring Size From mm|Ring Size thru mm|Plier Tip Style|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2581", "clsnbr": "09010402", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Heavy-Duty Pliers \u0026 Grip Pliers", "catnm4": "Grip Ring Retaining Ring Pliers", "catnm5": "", "imgnme": "Daemar_RotorClip-RPN-HeavyDuty_300x300.jpg", "notes": "\u003Cstrong\u003EExternal Grip Ring Pliers\u003C/strong\u003E \u003Cbr /\u003EInch \u003Cbr /\u003E Grip Ring Pliers are designed for SHF \u0026 DSF external (shaft) friction rings. The pliers are made of forged Chrome Vanadium steel with nonslip solid tips, and the handles have a non-slip plastic coating. Features a stop spring to prevent overspreading of the retaining ring.\u003Cbr /\u003E\u003Cbr /\u003EExternal Series: SHF", "grpatr": "Ring Series 1|Ring Size From mm|Ring Size thru mm|Ring Series 2|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2579", "clsnbr": "09010403", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Heavy-Duty Pliers \u0026 Grip Pliers", "catnm4": "Internal Heavy Duty Pliers", "catnm5": "", "imgnme": "Daemar_RotorClip-RPN-HeavyDuty_300x300.jpg", "notes": "\u003Cstrong\u003EInternal Heavy Duty Pliers\u003C/strong\u003E \u003Cbr /\u003EInch \u0026 Metric \u003Cbr /\u003E\u003Cbr /\u003EHeavy-Duty Retaining Ring Pliers are designed to perform with excessive use \u0026ndash; up to 10 times longer than standard retaining ring pliers. The pliers are made of forged Chrome Vanadium steel, and the handles have a non-slip plastic coating.\u003Cbr /\u003E\u003Cbr /\u003EInternal Series: HO,HOI,DHO,DHT,MHO \u003Cbr /\u003E\u003Cbr /\u003E", "grpatr": "Ring Series|Ring Size From IN|Ring Size thru IN|Ring Series 1|Ring Size From mm|Ring Size thru mm|Plier Tip Style|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2575", "clsnbr": "090105", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Ratchet Pliers / Tips", "catnm4": "", "catnm5": "", "imgnme": "Daemar_RotorClip-RP28R_300x300.jpg", "notes": "\u003Cp align=\u0022left\u0022\u003EInch, Internal \u0026 External Ratchet Pliers \u0026 Tips \u003Cbr /\u003E\u003Cbr /\u003EInternal : HO, HOI, BHO, VHO \u003Cbr /\u003EExternal : SH,SHR,SHI,BSH,VSH \u003Cbr /\u003E\u003Cbr /\u003EAssemble large retaining rings up to 10\u0026rdquo; in diameter with ease and comfort using Ratchet Pliers.\u003C/p\u003E¶\u003Cp align=\u0022left\u0022\u003ESpring loaded mechanisms compress or expand large rings through gradual \u0026ldquo;steps.\u0026rdquo; Plier locks at the desired size without continued pressure on the handles.\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022text-decoration: underline;\u0022\u003E\u003Cstrong\u003E(Note: Ratchet Pliers do not include plier tips, which must be purchased separately.)\u003Cbr /\u003E\u003C/strong\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: xx-small; font-family: Swiss721BT-RomanCondensed;\u0022 face=\u0022Swiss721BT-RomanCondensed\u0022 size=\u00221\u0022\u003E\u003Cspan style=\u0022font-size: xx-small; font-family: Swiss721BT-RomanCondensed;\u0022 face=\u0022Swiss721BT-RomanCondensed\u0022 size=\u00221\u0022\u003E\u003C/span\u003E\u003C/span\u003E \u003C/p\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "2577", "clsnbr": "09010501", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Ratchet Pliers / Tips", "catnm4": "Ratchet Pliers External", "catnm5": "", "imgnme": "Daemar_RotorClip-RP28R_300x300.jpg|external_plier_dimensions_01.jpg", "notes": "\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003C/span\u003E\u003C/span\u003E\u003C/span\u003E¶\u003Cp\u003EInch External l Ratchet Plier \u0026 Tips \u003Cbr /\u003EExternal : SH, SHR, VSH, SHI, BSH \u003Cbr /\u003E\u003Cbr /\u003EAssemble large retaining rings up to 10\u0022 in diameter with ease and comfort using Rotor Clip Ratchet Pliers.\u003C/p\u003E¶\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003C/span\u003E\u003C/span\u003E\u003C/span\u003E¶\u003Cp\u003ESpring loaded mechanisms compress or expand large rings through gradual \u0022steps.\u0022 Plier locks at the desired size without continued pressure on the handles.\u003C/p\u003E¶\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003C/span\u003E\u003C/span\u003E\u003C/span\u003E¶\u003Cp\u003E\u003Cspan style=\u0022text-decoration: underline;\u0022\u003E\u003Cstrong\u003E(Note: Ratchet Pliers do not include plier tips, which must be purchased separately.)\u003C/strong\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003C/span\u003E\u003C/span\u003E", "grpatr": "Ring Series 1|Ring Size From|Ring Size thru|Ring Series 2|Ring Size from.|Ring Size Thru.|Plier Tip Style|Tip Colour Code|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2576", "clsnbr": "09010502", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Ratchet Pliers / Tips", "catnm4": "Ratchet Pliers Internal", "catnm5": "", "imgnme": "Daemar_RotorClip-RP28R_300x300.jpg|Internal_plier_dimensions_01.jpg", "notes": "\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003C/span\u003E\u003C/span\u003E\u003C/span\u003E¶\u003Cp\u003EInch Internal Ratchet Plier \u0026 Tips \u003Cbr /\u003EInternal : HO, HOI, BHO, VHO \u003Cbr /\u003E\u003Cbr /\u003EAssemble large retaining rings up to 10\u0022 in diameter with ease and comfort using Rotor Clip Ratchet Pliers.\u003C/p\u003E¶\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003C/span\u003E\u003C/span\u003E\u003C/span\u003E¶\u003Cp\u003ESpring loaded mechanisms compress or expand large rings through gradual \u0022steps.\u0022 Plier locks at the desired size without continued pressure on the handles.\u003C/p\u003E¶\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003C/span\u003E\u003C/span\u003E\u003C/span\u003E¶\u003Cp\u003E\u003Cspan style=\u0022text-decoration: underline;\u0022\u003E\u003Cstrong\u003E(Note: Ratchet Pliers do not include plier tips, which must be purchased separately.)\u003C/strong\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003Cspan style=\u0022font-size: xx-small; font-family: Arial;\u0022 face=\u0022Arial\u0022 size=\u00221\u0022\u003E\u003C/span\u003E\u003C/span\u003E", "grpatr": "Ring Series 1|Ring Size From|Ring Size thru|Ring Series 2|Ring Size from.|Ring Size Thru.|Plier Tip Style|Tip Colour Code|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2360", "clsnbr": "090106", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Standard Pliers", "catnm4": "", "catnm5": "", "imgnme": "Daemar_RotorClip-RP300_300x300.jpg", "notes": "Inch \u0026 Metric Standard Pliers \u003Cbr /\u003EInternal : HO, HOI, BHO, VHO, DHO, DHT\u003Cbr /\u003EExternal : SH, SHR, BSH, SHI, SHF, VSH, DSH, DST \u003Cbr /\u003E\u003Cbr /\u003EStandard Retaining Ring Pliers are made of high carbon, heat treated steel and produced to exacting QC specifications. They feature stop screw and return springs for problem-free installation/removal of retaining rings. This eliminates overspreading of external retaining rings, and speeds the assembly/removal of internal retaining rings by orienting plier to exact location of lug holes. And retaining ring pliers have exclusive air-cushioned handles.", "grpatr": "", "grpflg": "N" }, { "clsnam": "2574", "clsnbr": "09010601", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Standard Pliers", "catnm4": "External Metric Series Standard Pliers - DSH DST", "catnm5": "", "imgnme": "Daemar_RotorClip-RP300_300x300.jpg|external_metric_plier_dimensions_01.jpg", "notes": "\u003Cstrong\u003ESeries DSH DST Metric Rings\u003C/strong\u003E \u003Cbr /\u003E\u003Cbr /\u003EStandard Retaining Ring Pliers are made of high carbon, heat treated steel and produced to exacting QC specifications. They feature stop screw and return springs for problem-free installation/removal of retaining rings. This eliminates overspreading of external retaining rings, and speeds the assembly/removal of internal retaining rings by orienting plier to exact location of lug holes. And retaining ring pliers have exclusive air-cushioned handles.", "grpatr": "Ring Series|Ring Size From mm|Ring Size thru mm|Plier Tip Style", "grpflg": "Y" }, { "clsnam": "2572", "clsnbr": "09010602", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Standard Pliers", "catnm4": "External Series Standard Pliers - SH BSH VSH SHI", "catnm5": "", "imgnme": "Daemar_RotorClip-RP300_300x300.jpg|external_plier_dimensions_01.jpg", "notes": "\u003Cstrong\u003ESeries SH BSH VSH SHI SHR External Rings\u003C/strong\u003E \u003Cbr /\u003E\u003Cbr /\u003EStandard Retaining Ring Pliers are made of high carbon, heat treated steel and produced to exacting QC specifications. They feature stop screw and return springs for problem-free installation/removal of retaining rings. This eliminates overspreading of external retaining rings, and speeds the assembly/removal of internal retaining rings by orienting plier to exact location of lug holes. And retaining ring pliers have exclusive air-cushioned handles.", "grpatr": "Ring Series 1|Ring Size From|Ring Size thru|Ring Series 2|Ring Size from.|Ring Size Thru.|Plier Tip Style", "grpflg": "Y" }, { "clsnam": "2573", "clsnbr": "09010603", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Standard Pliers", "catnm4": "Internal Metric Series Standard Pliers - DHO DHT", "catnm5": "", "imgnme": "Daemar_RotorClip-RP300_300x300.jpg", "notes": "\u003Cstrong\u003ESeries DHO DHT Metric Rings\u003C/strong\u003E \u003Cbr /\u003E\u003Cbr /\u003EStandard Retaining Ring Pliers are made of high carbon, heat treated steel and produced to exacting QC specifications. They feature stop screw and return springs for problem-free installation/removal of retaining rings. This eliminates overspreading of external retaining rings, and speeds the assembly/removal of internal retaining rings by orienting plier to exact location of lug holes. And retaining ring pliers have exclusive air-cushioned handles.", "grpatr": "Ring Series|Ring Size From mm|Ring Size thru mm|Plier Tip Style|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "2571", "clsnbr": "09010604", "catnm1": "Retaining Rings", "catnm2": "Retaining Ring Installation Tools", "catnm3": "Standard Pliers", "catnm4": "Internal Series Standard Pliers - HO BHO VHO HOI", "catnm5": "", "imgnme": "Daemar_RotorClip-RP300_300x300.jpg|Internal_plier_dimensions_01.jpg", "notes": "\u003Cstrong\u003ESeries HO BHO VHO HOI Rings\u003C/strong\u003E \u003Cbr /\u003E\u003Cbr /\u003EStandard Retaining Ring Pliers are made of high carbon, heat treated steel and produced to exacting QC specifications. They feature stop screw and return springs for problem-free installation/removal of retaining rings. This eliminates overspreading of external retaining rings, and speeds the assembly/removal of internal retaining rings by orienting plier to exact location of lug holes. And retaining ring pliers have exclusive air-cushioned handles.", "grpatr": "Ring Series 1|Ring Size From|Ring Size thru|Ring Series 2|Ring Size from.|Ring Size Thru.|Plier Tip Style|Rotor Clip P/N", "grpflg": "Y" }, { "clsnam": "1198", "clsnbr": "0902", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_RetainingRings_Group_800x800.jpg", "notes": "Tapered Section Retaining Rings\u003Cul\u003E\u003CLI\u003EAxially and Radially Assembled \u003C/LI\u003E\u003CLI\u003EInch \u0026 Metric Size Retaining Rings\u003C/LI\u003E\u003CLI\u003EApplicators and Dispensers\u003C/LI\u003E\u003CLI\u003EDIN-472/D1300 (DHO)\u003C/LI\u003E\u003CLI\u003EDIN-471/D1400 (DSH)\u003CBR\u003E\u003C/LI\u003E\u003C/ul\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1048", "clsnbr": "090201", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "", "catnm5": "", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg", "notes": "Rotor Clip axial retaining rings are designed for axial installation into machined grooves. These rings are either internal for installation in housings and bores, or external, for assembly on shafts. Once installed, they provide a protrusion or \u0022shoulder\u0022 for retaining parts.¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "2364", "clsnbr": "09020101", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "HO - Internal Housing Ring", "catnm5": "", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg|DMR_HO-Dim-1_500x500.jpg|DMR_HO-Dim-2_500x500.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2367", "clsnbr": "0902010101", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "HO - Internal Housing Ring", "catnm5": "HO-H - Stainless Steel", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg|DMR_HO-Dim-1_500x500.jpg|DMR_HO-Dim-2_500x500.jpg", "notes": "Once installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel \u003Cbr /\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E .250 in - 10.0 in", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1053", "clsnbr": "0902010102", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "HO - Internal Housing Ring", "catnm5": "HO-PA - Carbon Steel Phosphate Coating", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg|DMR_HO-Dim-1_500x500.jpg|DMR_HO-Dim-2_500x500.jpg", "notes": "Once installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003EMaterial Finish: Phosphate \u003Cbr /\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Codes: Carbon Steel \u003Cbr /\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E .250 in - 10.0 in", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2366", "clsnbr": "0902010103", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "HO - Internal Housing Ring", "catnm5": "HO-ZD - Zinc Dichromate", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg|DMR_HO-Dim-1_500x500.jpg|DMR_HO-Dim-2_500x500.jpg", "notes": "Once installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003EMaterial Finish: ZD Zinc Dichromate \u003Cbr /\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Code: Carbon Steel \u003Cbr /\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .250 in - 10.0 in", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2369", "clsnbr": "0902010104", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "HO - Internal Housing Ring", "catnm5": "HO-ZF - Zinc Bright", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg|DMR_HO-Dim-1_500x500.jpg|DMR_HO-Dim-2_500x500.jpg", "notes": "Once installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003EMaterial Finish: Phosphate \u003Cbr /\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003Cbr /\u003E\u003Cbr /\u003EMaterial Codes: Zinc Bright \u003Cbr /\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E .250 in - 10.0 in", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2368", "clsnbr": "0902010105", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "HO - Internal Housing Ring", "catnm5": "HO-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg|DMR_HO-Dim-1_500x500.jpg|DMR_HO-Dim-2_500x500.jpg", "notes": "Once installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003EMaterial Finish: Phosphate \u003Cbr /\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Codes: Z3X Trivalent Chromate Zinc Plus Sealer\u003Cbr /\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E .250 in - 10.0 in", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2373", "clsnbr": "09020102", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "HOI - Internal Housing Inverted Ring", "catnm5": "", "imgnme": "Daemar-DMR-RetainingRing-HOI-300x300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2378", "clsnbr": "0902010201", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "HOI - Internal Housing Inverted Ring", "catnm5": "HOI-H - Stainless Steel", "imgnme": "Daemar-DMR-RetainingRing-HOI-300x300.jpg|DMR_HOI-Image-01_rev1.jpg", "notes": "Functions like an HO ring in a housing/bore. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard HO extend into the inner circumference of the housing/bore and allows for another assembly to pass through unimpeded.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .625 in - 2.5 in", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1154", "clsnbr": "0902010202", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "HOI - Internal Housing Inverted Ring", "catnm5": "HOI-PA - Carbon Steel Phosphate Coating", "imgnme": "Daemar-DMR-RetainingRing-HOI-300x300.jpg|DMR_HOI-Image-01_rev1.jpg", "notes": "Functions like an HO ring in a housing/bore. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard HO extend into the inner circumference of the housing/bore and allows for another assembly to pass through unimpeded.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .625 in - 2.5 in", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2379", "clsnbr": "0902010203", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "HOI - Internal Housing Inverted Ring", "catnm5": "HOI-ZD - Zinc Dichromate", "imgnme": "Daemar-DMR-RetainingRing-HOI-300x300.jpg|DMR_HOI-Image-01_rev1.jpg", "notes": "Functions like an HO ring in a housing/bore. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard HO extend into the inner circumference of the housing/bore and allows for another assembly to pass through unimpeded.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .625 in - 2.5 in", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2381", "clsnbr": "0902010204", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "HOI - Internal Housing Inverted Ring", "catnm5": "HOI-ZF - Zinc Bright", "imgnme": "Daemar-DMR-RetainingRing-HOI-300x300.jpg|DMR_HOI-Image-01_rev1.jpg", "notes": "Functions like an HO ring in a housing/bore. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard HO extend into the inner circumference of the housing/bore and allows for another assembly to pass through unimpeded.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .625 in - 2.5 in", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2380", "clsnbr": "0902010205", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "HOI - Internal Housing Inverted Ring", "catnm5": "HOI-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "Daemar-DMR-RetainingRing-HOI-300x300.jpg|DMR_HOI-Image-01_rev1.jpg", "notes": "Functions like an HO ring in a housing/bore. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard HO extend into the inner circumference of the housing/bore and allows for another assembly to pass through unimpeded.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .625 in - 2.5 in", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2365", "clsnbr": "09020103", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SH - External Shaft Ring", "catnm5": "", "imgnme": "DMR_SH_for_Catalog-300x300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2374", "clsnbr": "0902010301", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SH - External Shaft Ring", "catnm5": "SH-H- Stainless Steel", "imgnme": "DMR_SH_for_Catalog-300x300.jpg|DMR_SH-Dim_500x500.jpg", "notes": "Once installed in the groove of a shaft. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel\u003Cbr /\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .125 in - 10.0 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1155", "clsnbr": "0902010302", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SH - External Shaft Ring", "catnm5": "SH-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_SH_for_Catalog-300x300.jpg|DMR_SH-Dim_500x500.jpg", "notes": "Once installed in the groove of a shaft. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .125 in - 10.0 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2375", "clsnbr": "0902010303", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SH - External Shaft Ring", "catnm5": "SH-ZD - Zinc Dichromate", "imgnme": "DMR_SH_for_Catalog-300x300.jpg|DMR_SH-Dim_500x500.jpg", "notes": "Once installed in the groove of a shaft. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003EMaterial Code: Carbon Steel (Carbon spring steel (SAE 1060-1090/UNS G10600-G10900))\u003Cbr /\u003EMaterial Finish: ZD Zinc Dichromate \u003Cbr /\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .125 in - 10.0 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2377", "clsnbr": "0902010304", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SH - External Shaft Ring", "catnm5": "SH-ZF - Zinc Bright", "imgnme": "DMR_SH_for_Catalog-300x300.jpg|DMR_SH-Dim_500x500.jpg", "notes": "Once installed in the groove of a shaft. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003EMaterial Finish: Phosphate \u003Cbr /\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003Cbr /\u003EMaterial Codes: Zinc Bright\u003Cbr /\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900) \u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .125 in - 10.0 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2376", "clsnbr": "0902010305", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SH - External Shaft Ring", "catnm5": "SH-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_SH_for_Catalog-300x300.jpg|DMR_SH-Dim_500x500.jpg", "notes": "Once installed in the groove of a shaft. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003EMaterial Finish: Phosphate \u003Cbr /\u003E\u003Cbr /\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003EMaterial Codes: Z3X Trivalent Chromate Zinc Plus Sealer\u003Cbr /\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Cb\u003E\u003Cbr /\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E .125 in - 10.0 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2372", "clsnbr": "09020104", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SHI - External Shaft Inverted Ring", "catnm5": "", "imgnme": "Daemar-DMR-Retaining-Ring-SHI-Series-300x300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "1156", "clsnbr": "0902010401", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SHI - External Shaft Inverted Ring", "catnm5": "SHI-H - Stainless Steel", "imgnme": "Daemar-DMR-Retaining-Ring-SHI-Series-300x300.jpg|DMR_SHI-Image-01.jpg", "notes": "Functions like an SH ring on a shaft. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard SH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance in minimal. \u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .500 in - 2.5 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2382", "clsnbr": "0902010402", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SHI - External Shaft Inverted Ring", "catnm5": "SHI-PA - Carbon Steel Phosphate Coating", "imgnme": "Daemar-DMR-Retaining-Ring-SHI-Series-300x300.jpg|DMR_SHI-Image-01.jpg", "notes": "Functions like an SH ring on a shaft. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard SH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance in minimal. \u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .500 in - 2.5 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2383", "clsnbr": "0902010403", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SHI - External Shaft Inverted Ring", "catnm5": "SHI-ZD - Zinc Dichromate", "imgnme": "Daemar-DMR-Retaining-Ring-SHI-Series-300x300.jpg|DMR_SHI-Image-01.jpg", "notes": "Functions like an SH ring on a shaft. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard SH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance in minimal. \u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .500 in - 2.5 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2385", "clsnbr": "0902010404", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SHI - External Shaft Inverted Ring", "catnm5": "SHI-ZF - Zinc Bright", "imgnme": "Daemar-DMR-Retaining-Ring-SHI-Series-300x300.jpg|DMR_SHI-Image-01.jpg", "notes": "Functions like an SH ring on a shaft. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard SH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance in minimal. \u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .500 in - 2.5 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2384", "clsnbr": "0902010405", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SHI - External Shaft Inverted Ring", "catnm5": "SHI-Z3X Trivalent Chromate Zinc Plus Sealer", "imgnme": "Daemar-DMR-Retaining-Ring-SHI-Series-300x300.jpg|DMR_SHI-Image-01.jpg", "notes": "Functions like an SH ring on a shaft. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard SH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance in minimal. \u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .500 in - 2.5 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2370", "clsnbr": "09020105", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SHM - External Shaft Tamper-Proof Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog-SHM_300x300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2390", "clsnbr": "0902010501", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SHM - External Shaft Tamper-Proof Ring", "catnm5": "SHM-H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog-SHM_300x300.jpg|DMR_SHM-Image-01.jpg", "notes": "The SHM also functions like an SH retaining ring. but in \u0022smaller\u0022 applications. It is also a tamper proof ring which does not have any lugs and can not be easily removed once installed. \u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .101 in - .375 in", "grpatr": "Shaft Diameter - Ds (in)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1158", "clsnbr": "0902010502", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SHM - External Shaft Tamper-Proof Ring", "catnm5": "SHM-PA - Carbon Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog-SHM_300x300.jpg|DMR_SHM-Image-01.jpg", "notes": "The SHM also functions like an SH retaining ring. but in \u0022smaller\u0022 applications. It is also a tamper proof ring which does not have any lugs and can not be easily removed once installed. \u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .101 in - .375 in", "grpatr": "Shaft Diameter - Ds (in)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2391", "clsnbr": "0902010503", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SHM - External Shaft Tamper-Proof Ring", "catnm5": "SHM-ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog-SHM_300x300.jpg|DMR_SHM-Image-01.jpg", "notes": "The SHM also functions like an SH retaining ring. but in \u0022smaller\u0022 applications. It is also a tamper proof ring which does not have any lugs and can not be easily removed once installed. \u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .101 in - .375 in", "grpatr": "Shaft Diameter - Ds (in)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2393", "clsnbr": "0902010504", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SHM - External Shaft Tamper-Proof Ring", "catnm5": "SHM-ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog-SHM_300x300.jpg|DMR_SHM-Image-01.jpg", "notes": "The SHM also functions like an SH retaining ring. but in \u0022smaller\u0022 applications. It is also a tamper proof ring which does not have any lugs and can not be easily removed once installed. \u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .101 in - .375 in", "grpatr": "Shaft Diameter - Ds (in)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2392", "clsnbr": "0902010505", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SHM - External Shaft Tamper-Proof Ring", "catnm5": "SHM-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog-SHM_300x300.jpg|DMR_SHM-Image-01.jpg", "notes": "The SHM also functions like an SH retaining ring. but in \u0022smaller\u0022 applications. It is also a tamper proof ring which does not have any lugs and can not be easily removed once installed. \u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .101 in - .375 in", "grpatr": "Shaft Diameter - Ds (in)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2371", "clsnbr": "09020106", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SHR - External Shaft Reinforced Ring", "catnm5": "", "imgnme": "Daemar-DMR-Retaining-Ring-SHR-Series-300x300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2386", "clsnbr": "0902010601", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SHR - External Shaft Reinforced Ring", "catnm5": "SHR-H - Stainless Steel", "imgnme": "Daemar-DMR-Retaining-Ring-SHR-Series-300x300.jpg|DMR_SHR-Image-01.jpg", "notes": "The SHR is an extra thick version of a regular SH retaining ring. As such. it is stronger and can withstand greater thrust loads than its standard counterpart.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .394 in - 2.0 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1157", "clsnbr": "0902010602", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SHR - External Shaft Reinforced Ring", "catnm5": "SHR-PA - Carbon Steel Phosphate Coating", "imgnme": "Daemar-DMR-Retaining-Ring-SHR-Series-300x300.jpg|DMR_SHR-Image-01.jpg", "notes": "The SHR is an extra thick version of a regular SH retaining ring. As such. it is stronger and can withstand greater thrust loads than its standard counterpart.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .394 in - 2.0 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2387", "clsnbr": "0902010603", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SHR - External Shaft Reinforced Ring", "catnm5": "SHR-ZD - Zinc Dichromate", "imgnme": "Daemar-DMR-Retaining-Ring-SHR-Series-300x300.jpg|DMR_SHR-Image-01.jpg", "notes": "The SHR is an extra thick version of a regular SH retaining ring. As such. it is stronger and can withstand greater thrust loads than its standard counterpart.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .394 in - 2.0 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2389", "clsnbr": "0902010604", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SHR - External Shaft Reinforced Ring", "catnm5": "SHR-ZF - Zinc Bright", "imgnme": "Daemar-DMR-Retaining-Ring-SHR-Series-300x300.jpg|DMR_SHR-Image-01.jpg", "notes": "The SHR is an extra thick version of a regular SH retaining ring. As such. it is stronger and can withstand greater thrust loads than its standard counterpart.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .394 in - 2.0 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2388", "clsnbr": "0902010605", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Axially Assembled Rings", "catnm4": "SHR - External Shaft Reinforced Ring", "catnm5": "SHR-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "Daemar-DMR-Retaining-Ring-SHR-Series-300x300.jpg|DMR_SHR-Image-01.jpg", "notes": "The SHR is an extra thick version of a regular SH retaining ring. As such. it is stronger and can withstand greater thrust loads than its standard counterpart.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .394 in - 2.0 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1052", "clsnbr": "090202", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "", "catnm5": "", "imgnme": "DMR_SH_for_Catalog-300x300.jpg", "notes": "Axial, Radial and Self-Locking retaining rings available in DIN metric sizes. DIN-472/D1300 (DHO), DIN-471/D1400 (DSH)", "grpatr": "", "grpflg": "N" }, { "clsnam": "1572", "clsnbr": "09020201", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DC - External Crescent Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog-C_300x300.jpg", "notes": "Ideal for low clearance applications where radial installation is preferred.¶¶Size Range: 3mm - 55m", "grpatr": "", "grpflg": "N" }, { "clsnam": "2542", "clsnbr": "0902020101", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DC - External Crescent Ring", "catnm5": "DC-H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog-C_300x300.jpg|DMR_C-Image-01.jpg", "notes": "Ideal for low clearance applications where radial installation is preferred.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel ¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 3 mm - 55 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "1188", "clsnbr": "0902020102", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DC - External Crescent Ring", "catnm5": "DC-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog-C_300x300.jpg|DMR_C-Image-01.jpg", "notes": "Ideal for low clearance applications where radial installation is preferred.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 3 mm - 55 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2543", "clsnbr": "0902020103", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DC - External Crescent Ring", "catnm5": "DC-ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog-C_300x300.jpg|DMR_C-Image-01.jpg", "notes": "Ideal for low clearance applications where radial installation is preferred.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: ZD Zinc Dichromate ¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 3 mm - 55 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2545", "clsnbr": "0902020104", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DC - External Crescent Ring", "catnm5": "DC-ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog-C_300x300.jpg|DMR_C-Image-01.jpg", "notes": "Ideal for low clearance applications where radial installation is preferred.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003E\u003Co:p\u003EMaterial Finish: Zinc Bright ¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting.\u003C/o:p\u003E\u003C/span\u003E¶\u003Cp\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 3 mm - 55 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2544", "clsnbr": "0902020105", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DC - External Crescent Ring", "catnm5": "DC-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog-C_300x300.jpg|DMR_C-Image-01.jpg", "notes": "Ideal for low clearance applications where radial installation is preferred.\u003Cbr /\u003E\u003Cbr /\u003E ¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 3 mm - 55 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "1219", "clsnbr": "09020202", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DE - External E Ring", "catnm5": "", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg", "notes": "Perhaps the most popular and widely used radial retaining ring is the \u0022E\u0022 (so named because it is shaped like the letter \u0022E\u0022.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.¶¶\u003Cb\u003ESize Range:\u003C/b\u003E 8mm - 30mm", "grpatr": "", "grpflg": "N" }, { "clsnam": "2538", "clsnbr": "0902020201", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DE - External E Ring", "catnm5": "DE-H - Stainless Steel", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_DE-Dim_800x181.jpg", "notes": "Perhaps the most popular and widely used radial retaining ring is the \u0022E\u0022 (so named because it is shaped like the letter \u0022E\u0022.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel ¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 30 mm\u003Cbr /\u003E\u003Cbr /\u003ESharp Corner Abutment.The radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Nom Size - Dg (mm)|Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Gap - A (mm)|Clearance Free O.D. - G Ref. (mm)", "grpflg": "Y" }, { "clsnam": "1187", "clsnbr": "0902020202", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DE - External E Ring", "catnm5": "DE-PA - Carbon Steel Phosphate Coating", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_DE-Dim_800x181.jpg", "notes": "Perhaps the most popular and widely used radial retaining ring is the \u0022E\u0022 (so named because it is shaped like the letter \u0022E\u0022.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 30 mm\u003Cbr /\u003E\u003Cbr /\u003ESharp Corner Abutment.The radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Nom Size - Dg (mm)|Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Gap - A (mm)|Clearance Free O.D. - G Ref. (mm)", "grpflg": "Y" }, { "clsnam": "2539", "clsnbr": "0902020203", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DE - External E Ring", "catnm5": "DE-ZD - Zinc Dichromate", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_DE-Dim_800x181.jpg", "notes": "Perhaps the most popular and widely used radial retaining ring is the \u0022E\u0022 (so named because it is shaped like the letter \u0022E\u0022.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: ZD Zinc Dichromate ¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 30 mm\u003Cbr /\u003E\u003Cbr /\u003ESharp Corner Abutment.The radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Nom Size - Dg (mm)|Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Gap - A (mm)|Clearance Free O.D. - G Ref. (mm)", "grpflg": "Y" }, { "clsnam": "2541", "clsnbr": "0902020204", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DE - External E Ring", "catnm5": "DE-ZF - Zinc Bright", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_DE-Dim_800x181.jpg", "notes": "Perhaps the most popular and widely used radial retaining ring is the \u0022E\u0022 (so named because it is shaped like the letter \u0022E\u0022.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.\u003Cbr /\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003E\u003Cbr /\u003E\u003C/span\u003EMaterial Finish: Zinc Bright ¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting.\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 8 mm - 30 mm\u003Cbr /\u003E\u003Cbr /\u003ESharp Corner Abutment.The radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Nom Size - Dg (mm)|Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Gap - A (mm)|Clearance Free O.D. - G Ref. (mm)", "grpflg": "Y" }, { "clsnam": "2540", "clsnbr": "0902020205", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DE - External E Ring", "catnm5": "DE-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_DE-Dim_800x181.jpg", "notes": "Perhaps the most popular and widely used radial retaining ring is the \u0022E\u0022 (so named because it is shaped like the letter \u0022E\u0022.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.\u003Cbr /\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003E\u003Cbr /\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 30 mm\u003Cbr /\u003E\u003Cbr /\u003ESharp Corner Abutment.The radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Nom Size - Dg (mm)|Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Gap - A (mm)|Clearance Free O.D. - G Ref. (mm)", "grpflg": "Y" }, { "clsnam": "1822", "clsnbr": "09020203", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHI - Internal Housing Inverted Ring", "catnm5": "", "imgnme": "Daemar-DMR-RetainingRing-HOI-300x300.jpg", "notes": "Functions like an HO ring in a housing/bore. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard DHO extend into the inner circumference of the housing/bore and allows for another assembly to pass through unimpeded.¶¶Size Range: 12mm - 100mm", "grpatr": "", "grpflg": "N" }, { "clsnam": "2489", "clsnbr": "0902020301", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHI - Internal Housing Inverted Ring", "catnm5": "DHI-H - Stainless Steel", "imgnme": "Daemar-DMR-RetainingRing-HOI-300x300.jpg|DMR_HOI-Image-01_rev1.jpg", "notes": "Functions like an HO ring in a housing/bore. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard DHO extend into the inner circumference of the housing/bore and allows for another assembly to pass through unimpeded.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel \u003Cbr /\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003ESize Range: \u003C/b\u003E12 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Housing Diameter - Dh (mm)|Groove Diameter - Dg (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "1176", "clsnbr": "0902020302", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHI - Internal Housing Inverted Ring", "catnm5": "DHI-PA - Carbon Steel Phosphate Coating", "imgnme": "Daemar-DMR-RetainingRing-HOI-300x300.jpg|DMR_HOI-Image-01_rev1.jpg", "notes": "Functions like an HO ring in a housing/bore. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard DHO extend into the inner circumference of the housing/bore and allows for another assembly to pass through unimpeded.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range: \u003C/b\u003E12 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2490", "clsnbr": "0902020303", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHI - Internal Housing Inverted Ring", "catnm5": "DHI-ZD - Zinc Dichromate", "imgnme": "Daemar-DMR-RetainingRing-HOI-300x300.jpg|DMR_HOI-Image-01_rev1.jpg", "notes": "Functions like an HO ring in a housing/bore. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard DHO extend into the inner circumference of the housing/bore and allows for another assembly to pass through unimpeded.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: ZD Zinc Dichromate ¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement..\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003ESize Range: \u003C/b\u003E12 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2492", "clsnbr": "0902020304", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHI - Internal Housing Inverted Ring", "catnm5": "DHI-ZF - Zinc Bright", "imgnme": "Daemar-DMR-RetainingRing-HOI-300x300.jpg|DMR_HOI-Image-01_rev1.jpg", "notes": "Functions like an HO ring in a housing/bore. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard DHO extend into the inner circumference of the housing/bore and allows for another assembly to pass through unimpeded.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Zinc Bright ¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003ESize Range: \u003C/b\u003E12 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2491", "clsnbr": "0902020305", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHI - Internal Housing Inverted Ring", "catnm5": "DHI-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "Daemar-DMR-RetainingRing-HOI-300x300.jpg|DMR_HOI-Image-01_rev1.jpg", "notes": "Functions like an HO ring in a housing/bore. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard DHO extend into the inner circumference of the housing/bore and allows for another assembly to pass through unimpeded.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/span\u003E\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003ESize Range: \u003C/b\u003E12 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "1828", "clsnbr": "09020204", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHO - Internal Housing Ring", "catnm5": "", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg", "notes": "Once installed in the groove of a housing/bore. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.¶¶Size Range: 8mm - 400mm", "grpatr": "", "grpflg": "N" }, { "clsnam": "2485", "clsnbr": "0902020401", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHO - Internal Housing Ring", "catnm5": "DHO-H - Stainless Steel", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg|DMR_HO-Dim_500x500.jpg", "notes": "\u003Cp\u003EOnce installed in the groove of a housing/bore. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place. \u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel \u003C/p\u003E¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cp\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 400 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.\u003C/p\u003E¶\u003Cp\u003EDIN-472/D1300 (DHO)\u003C/p\u003E", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "1175", "clsnbr": "0902020402", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHO - Internal Housing Ring", "catnm5": "DHO-PA - Carbon Steel Phosphate Coating", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg|DMR_HO-Dim_500x500.jpg", "notes": "\u003Cp\u003EOnce installed in the groove of a housing/bore. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place. \u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 400 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.\u003C/p\u003E¶\u003Cp\u003EDIN-472/D1300 (DHO)\u003C/p\u003E", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2486", "clsnbr": "0902020403", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHO - Internal Housing Ring", "catnm5": "DHO-ZD - Zinc Dichromate", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg|DMR_HO-Dim_500x500.jpg", "notes": "\u003Cp\u003EOnce installed in the groove of a housing/bore. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place. \u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003C/p\u003E¶\u003Cp\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 400 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.\u003C/p\u003E¶\u003Cp\u003EDIN-472/D1300 (DHO)\u003C/p\u003E", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2488", "clsnbr": "0902020404", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHO - Internal Housing Ring", "catnm5": "DHO-ZF - Zinc Bright", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg|DMR_HO-Dim_500x500.jpg", "notes": "\u003Cp\u003EOnce installed in the groove of a housing/bore. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place. \u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting.\u003C/p\u003E¶\u003Cp\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 400 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.\u003C/p\u003E¶\u003Cp\u003EDIN-472/D1300 (DHO)\u003C/p\u003E", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2487", "clsnbr": "0902020405", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHO - Internal Housing Ring", "catnm5": "DHO-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg|DMR_HO-Dim_500x500.jpg", "notes": "\u003Cp\u003EOnce installed in the groove of a housing/bore. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place. \u003Cbr /\u003E\u003Cbr /\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 400 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.\u003C/p\u003E¶\u003Cp\u003EDIN-472/D1300 (DHO)\u003C/p\u003E", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "1143", "clsnbr": "09020205", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHR - Internal Housing Reinforced Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog_DHR_300X300.jpg", "notes": "A thicker version of the DHO featuring a larger radial width than this ring. Once installed in the groove of a housing/bore. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.¶¶Size Range: 20mm - 100mm", "grpatr": "", "grpflg": "N" }, { "clsnam": "2497", "clsnbr": "0902020501", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHR - Internal Housing Reinforced Ring", "catnm5": "DHR-H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog_DHR_300X300.jpg|DMR_DHR-Image.jpg", "notes": "A thicker version of the DHO featuring a larger radial width than this ring. Once installed in the groove of a housing/bore. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place. \u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel \u003Cbr /\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 20 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "1182", "clsnbr": "0902020502", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHR - Internal Housing Reinforced Ring", "catnm5": "DHR-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog_DHR_300X300.jpg|DMR_DHR-Image.jpg", "notes": "A thicker version of the DHO featuring a larger radial width than this ring. Once installed in the groove of a housing/bore. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place. \u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 20 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2498", "clsnbr": "0902020503", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHR - Internal Housing Reinforced Ring", "catnm5": "DHR-ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog_DHR_300X300.jpg|DMR_DHR-Image.jpg", "notes": "A thicker version of the DHO featuring a larger radial width than this ring. Once installed in the groove of a housing/bore. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place. \u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: ZD Zinc Dichromate ¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 20 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2501", "clsnbr": "0902020504", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHR - Internal Housing Reinforced Ring", "catnm5": "DHR-ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog_DHR_300X300.jpg|DMR_DHR-Image.jpg", "notes": "\u003Cp\u003EA thicker version of the DHO featuring a larger radial width than this ring. Once installed in the groove of a housing/bore. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place. \u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003C/p\u003E¶\u003Cb\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 20 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2500", "clsnbr": "0902020505", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHR - Internal Housing Reinforced Ring", "catnm5": "DHR-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog_DHR_300X300.jpg|DMR_DHR-Image.jpg", "notes": "A thicker version of the DHO featuring a larger radial width than this ring. Once installed in the groove of a housing/bore. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place. \u003Cbr /\u003E\u003Cbr /\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/span\u003E\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 20 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "1144", "clsnbr": "09020206", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHT - Internal Housing Teeth Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog_DHT_300X300.jpg", "notes": "Similar in design to the DHO internal ring. this features several \u0022teeth\u0022 equally distributed along the circumference of the ring. The increased shoulder offered by the teeth is particularly effective in retaining applications with large radii or chamfers.¶¶Size Range: 16mm - 170mm", "grpatr": "", "grpflg": "N" }, { "clsnam": "2493", "clsnbr": "0902020601", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHT - Internal Housing Teeth Ring", "catnm5": "DHT-H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog_DHT_300X300.jpg|DMR_DHT_Dim_800x181.jpg", "notes": "Similar in design to the DHO internal ring. this features several \u0022teeth\u0022 equally distributed along the circumference of the ring. The increased shoulder offered by the teeth is particularly effective in retaining applications with large radii or chamfers.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel \u003Cbr /\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 16 mm - 170 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "1177", "clsnbr": "0902020602", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHT - Internal Housing Teeth Ring", "catnm5": "DHT-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog_DHT_300X300.jpg|DMR_DHT_Dim_800x181.jpg", "notes": "Similar in design to the DHO internal ring. this features several \u0022teeth\u0022 equally distributed along the circumference of the ring. The increased shoulder offered by the teeth is particularly effective in retaining applications with large radii or chamfers.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 16 mm - 170 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2494", "clsnbr": "0902020603", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHT - Internal Housing Teeth Ring", "catnm5": "DHT-ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog_DHT_300X300.jpg|DMR_DHT_Dim_800x181.jpg", "notes": "Similar in design to the DHO internal ring. this features several \u0022teeth\u0022 equally distributed along the circumference of the ring. The increased shoulder offered by the teeth is particularly effective in retaining applications with large radii or chamfers.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: ZD Zinc Dichromate ¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 16 mm - 170 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2496", "clsnbr": "0902020604", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHT - Internal Housing Teeth Ring", "catnm5": "DHT-ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog_DHT_300X300.jpg|DMR_DHT_Dim_800x181.jpg", "notes": "Similar in design to the DHO internal ring. this features several \u0022teeth\u0022 equally distributed along the circumference of the ring. The increased shoulder offered by the teeth is particularly effective in retaining applications with large radii or chamfers.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Zinc Bright \u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003E\u003C/span\u003E\u003C/span\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003Cbr /\u003E\u003Cbr /\u003E\u003C/span\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 16 mm - 170 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2495", "clsnbr": "0902020605", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DHT - Internal Housing Teeth Ring", "catnm5": "DHT-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog_DHT_300X300.jpg|DMR_DHT_Dim_800x181.jpg", "notes": "Similar in design to the DHO internal ring. this features several \u0022teeth\u0022 equally distributed along the circumference of the ring. The increased shoulder offered by the teeth is particularly effective in retaining applications with large radii or chamfers.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cb\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 16 mm - 170 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Housing Diameter - Dh (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "1827", "clsnbr": "09020207", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DSH - External Shaft Ring", "catnm5": "", "imgnme": "DMR_SH_for_Catalog-300x300.jpg", "notes": "Once installed in the groove of a shaft. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.¶¶Size Range: 3mm - 400mm", "grpatr": "", "grpflg": "N" }, { "clsnam": "2506", "clsnbr": "0902020701", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DSH - External Shaft Ring", "catnm5": "DSH-H - Stainless Steel", "imgnme": "DMR_SH_for_Catalog-300x300.jpg|DMR_DSH-TechDrawing_1020x300.jpg", "notes": "\u003Cp\u003EOnce installed in the groove of a shaft. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel \u003C/p\u003E¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cp\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 3 mm - 400 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.\u003C/p\u003E¶\u003Cp\u003EDIN-471/D1400 (DSH)\u003Cbr /\u003E\u003Cbr /\u003E\u003C/p\u003E¶\u003Cstrong\u003EAlternate Lug Designs are Manufacturer\u0027s option.\u003C/strong\u003E", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "1184", "clsnbr": "0902020702", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DSH - External Shaft Ring", "catnm5": "DSH-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_SH_for_Catalog-300x300.jpg|DMR_DSH-TechDrawing_1020x300.jpg", "notes": "\u003Cp\u003EOnce installed in the groove of a shaft. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/p\u003E¶\u003Cp\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 3 mm - 400 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.\u003C/p\u003E¶\u003Cp\u003EDIN-471/D1400 (DSH)\u003Cbr /\u003E\u003Cbr /\u003E\u003C/p\u003E¶\u003Cstrong\u003EAlternate Lug Designs are Manufacturer\u0027s option.\u003C/strong\u003E", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2507", "clsnbr": "0902020703", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DSH - External Shaft Ring", "catnm5": "DSH-ZD - Zinc Dichromate", "imgnme": "DMR_SH_for_Catalog-300x300.jpg|DMR_DSH-TechDrawing_1020x300.jpg", "notes": "\u003Cp\u003EOnce installed in the groove of a shaft. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003C/p\u003E¶\u003Cp\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 3 mm - 400 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.\u003C/p\u003E¶\u003Cp\u003EDIN-471/D1400 (DSH)\u003Cbr /\u003E\u003Cbr /\u003E\u003C/p\u003E¶\u003Cstrong\u003EAlternate Lug Designs are Manufacturer\u0027s option.\u003C/strong\u003E", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2509", "clsnbr": "0902020704", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DSH - External Shaft Ring", "catnm5": "DSH-ZF - Zinc Bright", "imgnme": "DMR_SH_for_Catalog-300x300.jpg|DMR_DSH-TechDrawing_1020x300.jpg", "notes": "\u003Cp\u003EOnce installed in the groove of a shaft. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting.\u003C/p\u003E¶\u003Cp\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 3 mm - 400 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.\u003C/p\u003E¶\u003Cp\u003EDIN-471/D1400 (DSH)\u003Cbr /\u003E\u003Cbr /\u003E\u003C/p\u003E¶\u003Cstrong\u003EAlternate Lug Designs are Manufacturer\u0027s option.\u003C/strong\u003E", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2508", "clsnbr": "0902020705", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DSH - External Shaft Ring", "catnm5": "DSH-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_SH_for_Catalog-300x300.jpg|DMR_DSH-TechDrawing_1020x300.jpg", "notes": "\u003Cp\u003EOnce installed in the groove of a shaft. the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003E\u003Cbr /\u003E \u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 3 mm - 400 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.\u003C/p\u003E¶\u003Cp\u003EDIN-471/D1400 (DSH)\u003Cbr /\u003E\u003Cbr /\u003E\u003C/p\u003E¶\u003Cstrong\u003EAlternate Lug Designs are Manufacturer\u0027s option.\u003C/strong\u003E", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2299", "clsnbr": "09020208", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DSI - External Shaft Inverted Ring", "catnm5": "", "imgnme": "Daemar-DMR-Retaining-Ring-SHI-Series-300x300.jpg", "notes": "Functions like an SH ring on a shaft, only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard DSH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance in minimal.¶¶Size Range: 12mm - 100mm", "grpatr": "", "grpflg": "N" }, { "clsnam": "2510", "clsnbr": "0902020801", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DSI - External Shaft Inverted Ring", "catnm5": "DSI-H - Stainless Steel", "imgnme": "Daemar-DMR-Retaining-Ring-SHI-Series-300x300.jpg|DMR_SH-Image-02.jpg", "notes": "\u003Cp\u003EFunctions like an SH ring on a shaft. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard DSH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance in minimal.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish/Code: Stainless Steel \u003C/p\u003E¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 12 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "1185", "clsnbr": "0902020802", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DSI - External Shaft Inverted Ring", "catnm5": "DSI-PA - Carbon Steel Phosphate Coating", "imgnme": "Daemar-DMR-Retaining-Ring-SHI-Series-300x300.jpg|DMR_SH-Image-02.jpg", "notes": "Functions like an SH ring on a shaft. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard DSH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance in minimal.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 12 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2511", "clsnbr": "0902020803", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DSI - External Shaft Inverted Ring", "catnm5": "DSI-ZD - Zinc Dichromate", "imgnme": "Daemar-DMR-Retaining-Ring-SHI-Series-300x300.jpg|DMR_SH-Image-02.jpg", "notes": "\u003Cp\u003EFunctions like an SH ring on a shaft. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard DSH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance in minimal.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 12 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2513", "clsnbr": "0902020804", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DSI - External Shaft Inverted Ring", "catnm5": "DSI-ZF - Zinc Bright", "imgnme": "Daemar-DMR-Retaining-Ring-SHI-Series-300x300.jpg|DMR_SH-Image-02.jpg", "notes": "\u003Cp\u003EFunctions like an SH ring on a shaft. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard DSH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance in minimal.\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003E\u003Co:p\u003EMaterial Finish: Zinc Bright \u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. ¶\u003Cp\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 12 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2512", "clsnbr": "0902020805", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DSI - External Shaft Inverted Ring", "catnm5": "DSI-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "Daemar-DMR-Retaining-Ring-SHI-Series-300x300.jpg|DMR_SH-Image-02.jpg", "notes": "\u003Cp\u003EFunctions like an SH ring on a shaft. only the lugs are \u0022reversed.\u0022 This version reduces the distance the lugs of the standard DSH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance in minimal.\u003C/p\u003E¶\u003Cp\u003E \u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 12 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "1142", "clsnbr": "09020209", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DSR - External Shaft Reinforced Ring", "catnm5": "", "imgnme": "Daemar-DMR-Retaining-Ring-SHR-Series-300x300.jpg", "notes": "The DSR is an extra thick version of a regular DSH retaining ring. As such. it is stronger and can withstand greater thrust loads than its standard counterpart.¶¶Size Range: 12mm - 100mm", "grpatr": "", "grpflg": "N" }, { "clsnam": "2502", "clsnbr": "0902020901", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DSR - External Shaft Reinforced Ring", "catnm5": "DSR-H - Stainless Steel", "imgnme": "Daemar-DMR-Retaining-Ring-SHR-Series-300x300.jpg|DMR_SHR-Image-01.jpg", "notes": "The DSR is an extra thick version of a regular DSH retaining ring. As such. it is stronger and can withstand greater thrust loads than its standard counterpart.\u003Cbr /\u003E\u003Cbr /\u003E \u003Cbr /\u003EMaterial Finish/Code: Stainless Steel \u003Cbr /\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003Cb\u003E\u003Cbr /\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 12 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "1183", "clsnbr": "0902020902", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DSR - External Shaft Reinforced Ring", "catnm5": "DSR-PA - Carbon Steel Phosphate Coating", "imgnme": "Daemar-DMR-Retaining-Ring-SHR-Series-300x300.jpg|DMR_SHR-Image-01.jpg", "notes": "The DSR is an extra thick version of a regular DSH retaining ring. As such. it is stronger and can withstand greater thrust loads than its standard counterpart.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/p\u003E¶\u003Cb\u003E\u003Cbr /\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 12 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2503", "clsnbr": "0902020903", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DSR - External Shaft Reinforced Ring", "catnm5": "DSR-ZD - Zinc Dichromate", "imgnme": "Daemar-DMR-Retaining-Ring-SHR-Series-300x300.jpg|DMR_SHR-Image-01.jpg", "notes": "\u003Cp\u003EThe DSR is an extra thick version of a regular DSH retaining ring. As such. it is stronger and can withstand greater thrust loads than its standard counterpart.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003Cb\u003E\u003Cbr /\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 12 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2505", "clsnbr": "0902020904", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DSR - External Shaft Reinforced Ring", "catnm5": "DSR-ZF - Zinc Bright", "imgnme": "Daemar-DMR-Retaining-Ring-SHR-Series-300x300.jpg|DMR_SHR-Image-01.jpg", "notes": "\u003Cp\u003EThe DSR is an extra thick version of a regular DSH retaining ring. As such. it is stronger and can withstand greater thrust loads than its standard counterpart.\u003C/p\u003E¶\u003Cb\u003E\u003Cb\u003E \u003Cbr /\u003E\u003C/b\u003E\u003C/b\u003EMaterial Finish: Zinc Bright ¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 12 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2504", "clsnbr": "0902020905", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DSR - External Shaft Reinforced Ring", "catnm5": "DSR-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "Daemar-DMR-Retaining-Ring-SHR-Series-300x300.jpg|DMR_SHR-Image-01.jpg", "notes": "\u003Cp\u003EThe DSR is an extra thick version of a regular DSH retaining ring. As such. it is stronger and can withstand greater thrust loads than its standard counterpart.\u003C/p\u003E¶\u003Cb\u003E\u003Cb\u003E \u003Cbr /\u003E\u003C/b\u003E\u003C/b\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/span\u003E\u003Cb\u003E\u003Cbr /\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 12 mm - 100 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "1141", "clsnbr": "09020210", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DST - External Shaft Teeth Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog_DST_300X300.jpg", "notes": "Similar in design to the DSH external ring. this features several \u0022teeth\u0022 equally distributed along the circumference of the ring. The increased shoulder offered by the teeth is particularly effective in retaining applications with large radii or chamfers.¶¶Size Range: 16mm - 140mm", "grpatr": "", "grpflg": "N" }, { "clsnam": "2514", "clsnbr": "0902021001", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DST - External Shaft Teeth Ring", "catnm5": "DST-H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog_DST_300X300.jpg|DMR_DST_Dim_800x181.jpg", "notes": "\u003Cp\u003ESimilar in design to the DSH external ring. this features several \u0022teeth\u0022 equally distributed along the circumference of the ring. The increased shoulder offered by the teeth is particularly effective in retaining applications with large radii or chamfers.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish/Code: Stainless Steel \u003C/p\u003E¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 16 mm - 140 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "1186", "clsnbr": "0902021002", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DST - External Shaft Teeth Ring", "catnm5": "DST-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog_DST_300X300.jpg|DMR_DST_Dim_800x181.jpg", "notes": "Similar in design to the DSH external ring. this features several \u0022teeth\u0022 equally distributed along the circumference of the ring. The increased shoulder offered by the teeth is particularly effective in retaining applications with large radii or chamfers.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 16 mm - 140 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2515", "clsnbr": "0902021003", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DST - External Shaft Teeth Ring", "catnm5": "DST-ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog_DST_300X300.jpg|DMR_DST_Dim_800x181.jpg", "notes": "\u003Cp\u003ESimilar in design to the DSH external ring. this features several \u0022teeth\u0022 equally distributed along the circumference of the ring. The increased shoulder offered by the teeth is particularly effective in retaining applications with large radii or chamfers.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 16 mm - 140 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2517", "clsnbr": "0902021004", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DST - External Shaft Teeth Ring", "catnm5": "DST-ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog_DST_300X300.jpg|DMR_DST_Dim_800x181.jpg", "notes": "\u003Cp\u003ESimilar in design to the DSH external ring. this features several \u0022teeth\u0022 equally distributed along the circumference of the ring. The increased shoulder offered by the teeth is particularly effective in retaining applications with large radii or chamfers.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 16 mm - 140 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "2516", "clsnbr": "0902021005", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DST - External Shaft Teeth Ring", "catnm5": "DST-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog_DST_300X300.jpg|DMR_DST_Dim_800x181.jpg", "notes": "\u003Cp\u003ESimilar in design to the DSH external ring. this features several \u0022teeth\u0022 equally distributed along the circumference of the ring. The increased shoulder offered by the teeth is particularly effective in retaining applications with large radii or chamfers.\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 16 mm - 140 mm\u003Cbr /\u003E\u003Cbr /\u003EThe radius \u0022R\u0022 on the load side must not exceed 0.1 T.", "grpatr": "Shaft Diameter - Ds (mm)|Ring Thickness - T (mm)|Ring Free Diameter - Df (mm)", "grpflg": "Y" }, { "clsnam": "1831", "clsnbr": "09020211", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DTI - Toothed Internal \u0022Push on\u0022 Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog_TI_300X300.jpg", "notes": "The internal version of the DTX with a curved inner rim and a series of prongs protruding outwards. The ends create interference with the housing when the ring is installed and a load introduced to the other side.¶¶DTI Size Range: 8mm - 50mm¶¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "2566", "clsnbr": "0902021101", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DTI - Toothed Internal \u0022Push on\u0022 Ring", "catnm5": "DTI-H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog_TI_300X300.jpg|DMR_DTI-Dim_800x181.jpg", "notes": "The internal version of the DTX with a curved inner rim and a series of prongs protruding outwards. The ends create interference with the housing when the ring is installed and a load introduced to the other side.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel \u003Cbr /\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 50 mm", "grpatr": "Housing Diameter - Dh (mm)|Ring Dimension - I.D. (mm)|Ring Dimension - O.D. (mm)|No. Of Prongs", "grpflg": "Y" }, { "clsnam": "1190", "clsnbr": "0902021102", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DTI - Toothed Internal \u0022Push on\u0022 Ring", "catnm5": "DTI-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog_TI_300X300.jpg|DMR_DTI-Dim_800x181.jpg", "notes": "The internal version of the DTX with a curved inner rim and a series of prongs protruding outwards. The ends create interference with the housing when the ring is installed and a load introduced to the other side.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 50 mm", "grpatr": "Housing Diameter - Dh (mm)|Ring Dimension - I.D. (mm)|Ring Dimension - O.D. (mm)|No. Of Prongs", "grpflg": "Y" }, { "clsnam": "2567", "clsnbr": "0902021103", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DTI - Toothed Internal \u0022Push on\u0022 Ring", "catnm5": "DTI-ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog_TI_300X300.jpg|DMR_DTI-Dim_800x181.jpg", "notes": "The internal version of the DTX with a curved inner rim and a series of prongs protruding outwards. The ends create interference with the housing when the ring is installed and a load introduced to the other side.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: ZD Zinc Dichromate ¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 50 mm", "grpatr": "Housing Diameter - Dh (mm)|Ring Dimension - I.D. (mm)|Ring Dimension - O.D. (mm)|No. Of Prongs", "grpflg": "Y" }, { "clsnam": "2569", "clsnbr": "0902021104", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DTI - Toothed Internal \u0022Push on\u0022 Ring", "catnm5": "DTI-ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog_TI_300X300.jpg|DMR_DTI-Dim_800x181.jpg", "notes": "The internal version of the DTX with a curved inner rim and a series of prongs protruding outwards. The ends create interference with the housing when the ring is installed and a load introduced to the other side.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Zinc Bright \u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003E\u003C/span\u003E\u003C/span\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003E\u003C/span\u003E\u003C/span\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 50 mm\u003C/p\u003E", "grpatr": "Housing Diameter - Dh (mm)|Ring Dimension - I.D. (mm)|Ring Dimension - O.D. (mm)|No. Of Prongs", "grpflg": "Y" }, { "clsnam": "2568", "clsnbr": "0902021105", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DTI - Toothed Internal \u0022Push on\u0022 Ring", "catnm5": "DTI-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog_TI_300X300.jpg|DMR_DTI-Dim_800x181.jpg", "notes": "The internal version of the DTX with a curved inner rim and a series of prongs protruding outwards. The ends create interference with the housing when the ring is installed and a load introduced to the other side.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/span\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 50 mm\u003C/p\u003E", "grpatr": "Housing Diameter - Dh (mm)|Ring Dimension - I.D. (mm)|Ring Dimension - O.D. (mm)|No. Of Prongs", "grpflg": "Y" }, { "clsnam": "1829", "clsnbr": "09020212", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DTX - Toothed External \u0022Push on\u0022 Ring", "catnm5": "", "imgnme": "Daemar-DMR-Retaining-Ring-TX-Series-300x300.jpg", "notes": "This ring features a curved outer rim with a series of prongs protruding into the center. The ends create interference with the shaft when the ring is installed and a load introduced to the other side.¶¶DTX Size Range: 1.5mm - 45mm", "grpatr": "", "grpflg": "N" }, { "clsnam": "2562", "clsnbr": "0902021201", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DTX - Toothed External \u0022Push on\u0022 Ring", "catnm5": "DTX-H - Stainless Steel", "imgnme": "Daemar-DMR-Retaining-Ring-TX-Series-300x300.jpg|DMR_DTX-Dim_800x181.jpg", "notes": "\u003Cp\u003EThis ring features a curved outer rim with a series of prongs protruding into the center. The ends create interference with the shaft when the ring is installed and a load introduced to the other side.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish/Code: Stainless Steel \u003C/p\u003E¶PH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range\u003C/b\u003E: 1.5 mm - 45 mm", "grpatr": "Shaft Diameter - Ds (mm)|Ring Dimension - I.D. (mm)|Ring Dimension - O.D. (mm)|No. Of Prongs", "grpflg": "Y" }, { "clsnam": "1189", "clsnbr": "0902021202", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DTX - Toothed External \u0022Push on\u0022 Ring", "catnm5": "DTX-PA - Carbon Steel Phosphate Coating", "imgnme": "Daemar-DMR-Retaining-Ring-TX-Series-300x300.jpg|DMR_DTX-Dim_800x181.jpg", "notes": "\u003Cp\u003EThis ring features a curved outer rim with a series of prongs protruding into the center. The ends create interference with the shaft when the ring is installed and a load introduced to the other side.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Phosphate \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range\u003C/b\u003E: 1.5 mm - 45 mm", "grpatr": "Shaft Diameter - Ds (mm)|Ring Dimension - I.D. (mm)|Ring Dimension - O.D. (mm)|No. Of Prongs", "grpflg": "Y" }, { "clsnam": "2563", "clsnbr": "0902021203", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DTX - Toothed External \u0022Push on\u0022 Ring", "catnm5": "DTX-ZD - Zinc Dichromate", "imgnme": "Daemar-DMR-Retaining-Ring-TX-Series-300x300.jpg|DMR_DTX-Dim_800x181.jpg", "notes": "\u003Cp\u003EThis ring features a curved outer rim with a series of prongs protruding into the center. The ends create interference with the shaft when the ring is installed and a load introduced to the other side.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range\u003C/b\u003E: 1.5 mm - 45 mm", "grpatr": "Shaft Diameter - Ds (mm)|Ring Dimension - I.D. (mm)|Ring Dimension - O.D. (mm)|No. Of Prongs", "grpflg": "Y" }, { "clsnam": "2565", "clsnbr": "0902021204", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DTX - Toothed External \u0022Push on\u0022 Ring", "catnm5": "DTX-ZF - Zinc Bright", "imgnme": "Daemar-DMR-Retaining-Ring-TX-Series-300x300.jpg|DMR_DTX-Dim_800x181.jpg", "notes": "\u003Cp\u003EThis ring features a curved outer rim with a series of prongs protruding into the center. The ends create interference with the shaft when the ring is installed and a load introduced to the other side.\u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003E\u003C/span\u003E\u003C/span\u003E¶\u003Cp\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003E\u003C/span\u003E\u003C/span\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language:", "grpatr": "Shaft Diameter - Ds (mm)|Ring Dimension - I.D. (mm)|Ring Dimension - O.D. (mm)|No. Of Prongs", "grpflg": "Y" }, { "clsnam": "2564", "clsnbr": "0902021205", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "DTX - Toothed External \u0022Push on\u0022 Ring", "catnm5": "DTX-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "Daemar-DMR-Retaining-Ring-TX-Series-300x300.jpg|DMR_DTX-Dim_800x181.jpg", "notes": "\u003Cp\u003EThis ring features a curved outer rim with a series of prongs protruding into the center. The ends create interference with the shaft when the ring is installed and a load introduced to the other side.\u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/span\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range\u003C/b\u003E: 1.5 mm - 45 mm", "grpatr": "Shaft Diameter - Ds (mm)|Ring Dimension - I.D. (mm)|Ring Dimension - O.D. (mm)|No. Of Prongs", "grpflg": "Y" }, { "clsnam": "1825", "clsnbr": "09020213", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "JE - External E Ring", "catnm5": "", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg", "notes": "Perhaps the most popular and widely used radial retaining ring is the \u0022E\u0022 (so named because it is shaped like the letter \u0022E\u0022.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.¶¶\u003Cb\u003ESize Range:\u003C/b\u003E 0.8 mm - 24 mm¶\u003C/br\u003EJIS Metric¶¶¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "2546", "clsnbr": "0902021301", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "JE - External E Ring", "catnm5": "JE-H - Stainless Steel", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_JE-Dim_800x185.jpg", "notes": "Perhaps the most popular and widely radial retaining ring is the \u0022 E \u0022 (so named because it is shaped like the letter \u0022 E \u0022 ). Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies. \u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel \u003Cbr /\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 0.8 mm - 24 mm¶\u003C/br\u003EJIS Metric", "grpatr": "Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "1191", "clsnbr": "0902021302", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "JE - External E Ring", "catnm5": "JE-PA - Carbon Steel Phosphate Coating", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_JE-Dim_800x185.jpg", "notes": "Perhaps the most popular and widely radial retaining ring is the \u0022 E \u0022 (so named because it is shaped like the letter \u0022 E \u0022 ). Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies. \u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 0.8 mm - 24 mm¶\u003C/br\u003EJIS Metric", "grpatr": "Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2547", "clsnbr": "0902021303", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "JE - External E Ring", "catnm5": "JE-ZD - Zinc Dichromate", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_JE-Dim_800x185.jpg", "notes": "Perhaps the most popular and widely radial retaining ring is the \u0022 E \u0022 (so named because it is shaped like the letter \u0022 E \u0022 ). Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies. \u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: ZD Zinc Dichromate ¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 0.8 mm - 24 mm¶\u003C/br\u003EJIS Metric", "grpatr": "Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2549", "clsnbr": "0902021304", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "JE - External E Ring", "catnm5": "JE-ZF - Zinc Bright", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_JE-Dim_800x185.jpg", "notes": "\u003Cp\u003EPerhaps the most popular and widely radial retaining ring is the \u0022 E \u0022 (so named because it is shaped like the letter \u0022 E \u0022 ). Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies. \u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 0.8 mm - 24 mm¶\u003C/br\u003EJIS Metric", "grpatr": "Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2548", "clsnbr": "0902021305", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "JE - External E Ring", "catnm5": "JE-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_JE-Dim_800x185.jpg", "notes": "Perhaps the most popular and widely radial retaining ring is the \u0022 E \u0022 (so named because it is shaped like the letter \u0022 E \u0022 ). Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies. \u003Cbr /\u003E\u003Cbr /\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 0.8 mm - 24 mm¶\u003C/br\u003EJIS Metric", "grpatr": "Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "1824", "clsnbr": "09020214", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MC - External Crescent Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog-C_300x300.jpg", "notes": "External, ANSI Metric Crescent Ring - Ideal for low clearance applications where radial installation is preferred.¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 3 mm - 55 mm¶¶¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "2554", "clsnbr": "0902021401", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MC - External Crescent Ring", "catnm5": "MC-H - External Crescent Ring ~ Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog-C_300x300.jpg|DMR_C-Image-01.jpg", "notes": "\u003Cp\u003EIdeal for low clearance applications where radial installation is preferred.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish/Code: Stainless Steel \u003C/p\u003E¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 3 mm - 55 mm¶\u003C/br\u003EANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "1196", "clsnbr": "0902021402", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MC - External Crescent Ring", "catnm5": "MC-PA - External Crescent Ring ~ Carbon Steel Phos", "imgnme": "DMR_RetainingRingStyles_for_Catalog-C_300x300.jpg|DMR_C-Image-01.jpg", "notes": "Ideal for low clearance applications where radial installation is preferred.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 3 mm - 55 mm¶\u003C/br\u003EANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2555", "clsnbr": "0902021403", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MC - External Crescent Ring", "catnm5": "MC-ZD - External Crescent Ring ~ Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog-C_300x300.jpg|DMR_C-Image-01.jpg", "notes": "\u003Cp\u003EIdeal for low clearance applications where radial installation is preferred.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 3 mm - 55 mm¶\u003C/br\u003EANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2557", "clsnbr": "0902021404", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MC - External Crescent Ring", "catnm5": "MC-ZF - External Crescent Ring ~ Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog-C_300x300.jpg|DMR_C-Image-01.jpg", "notes": "\u003Cp\u003EIdeal for low clearance applications where radial installation is preferred.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 3 mm - 55 mm¶\u003C/br\u003EANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2556", "clsnbr": "0902021405", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MC - External Crescent Ring", "catnm5": "MC-Z3X - External Crescent Ring ~ Trivalent Chroma", "imgnme": "DMR_RetainingRingStyles_for_Catalog-C_300x300.jpg|DMR_C-Image-01.jpg", "notes": "\u003Cp\u003EIdeal for low clearance applications where radial installation is preferred.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 3 mm - 55 mm¶\u003C/br\u003EANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "1820", "clsnbr": "09020215", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "ME - External E Ring", "catnm5": "", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg", "notes": "External, ANSI Metric E Ring - Perhaps the most popular and widely used radial retaining ring is the \u0022E\u0022 (so named because it is shaped like the letter \u0022E\u0022.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.¶¶\u003Cb\u003ESize Range:\u003C/b\u003E 8mm - 30mm¶¶¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "2550", "clsnbr": "0902021501", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "ME - External E Ring", "catnm5": "ME-H - Stainless Steel", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_E-Dim_800x800.jpg", "notes": "Perhaps the most popular and widely radial retaining ring is the \u0022 E \u0022 (so named because it is shaped like the letter \u0022 E \u0022 ). Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies. \u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel \u003Cbr /\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 1 mm - 25 mm¶\u003C/br\u003EANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "1195", "clsnbr": "0902021502", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "ME - External E Ring", "catnm5": "ME-PA - Carbon Steel Phosphate Coating", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_E-Dim_800x800.jpg", "notes": "Perhaps the most popular and widely radial retaining ring is the \u0022 E \u0022 (so named because it is shaped like the letter \u0022 E \u0022 ). Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies. \u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 1 mm - 25 mm¶\u003C/br\u003EANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2551", "clsnbr": "0902021503", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "ME - External E Ring", "catnm5": "ME-ZD - Zinc Dichromate", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_E-Dim_800x800.jpg", "notes": "\u003Cp\u003EPerhaps the most popular and widely radial retaining ring is the \u0022 E \u0022 (so named because it is shaped like the letter \u0022 E \u0022 ). Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies. \u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 1 mm - 25 mm¶\u003C/br\u003EANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2553", "clsnbr": "0902021504", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "ME - External E Ring", "catnm5": "ME-ZF - Zinc Bright", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_E-Dim_800x800.jpg", "notes": "\u003Cp\u003EPerhaps the most popular and widely radial retaining ring is the \u0022 E \u0022 (so named because it is shaped like the letter \u0022 E \u0022 ). Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003C/p\u003E¶\u003Cb\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 1 mm - 25 mm¶\u003C/br\u003EANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2552", "clsnbr": "0902021505", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "ME - External E Ring", "catnm5": "ME-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_E-Dim_800x800.jpg", "notes": "\u003Cp\u003EPerhaps the most popular and widely radial retaining ring is the \u0022 E \u0022 (so named because it is shaped like the letter \u0022 E \u0022 ). Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.\u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/span\u003E\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 1 mm - 25 mm¶\u003C/br\u003EANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "1823", "clsnbr": "09020216", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MHO - Internal Housing Ring", "catnm5": "", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg", "notes": "Internal, ANSI Metric Housing Ring - Once installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.¶¶\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 250 mm¶¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "2518", "clsnbr": "0902021601", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MHO - Internal Housing Ring", "catnm5": "MHO-H - Stainless Steel", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg|DMR_HO-Dim_500x500.jpg", "notes": "Once installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel \u003Cbr /\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 250 mm¶\u003C/br\u003E¶ANSI Metric", "grpatr": "Housing Diameter - Dh (mm)|Housing Diameter - Dh (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "1192", "clsnbr": "0902021602", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MHO - Internal Housing Ring", "catnm5": "MHO-PA - Carbon Steel Phosphate Coating", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg|DMR_HO-Dim_500x500.jpg", "notes": "Once installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 250 mm¶\u003C/br\u003E¶ANSI Metric", "grpatr": "Housing Diameter - Dh (mm)|Housing Diameter - Dh (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2519", "clsnbr": "0902021603", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MHO - Internal Housing Ring", "catnm5": "MHO-ZD - Zinc Dichromate", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg|DMR_HO-Dim_500x500.jpg", "notes": "\u003Cp\u003EOnce installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 250 mm¶\u003C/br\u003E¶ANSI Metric", "grpatr": "Housing Diameter - Dh (mm)|Housing Diameter - Dh (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2521", "clsnbr": "0902021604", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MHO - Internal Housing Ring", "catnm5": "MHO-ZF - Zinc Bright", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg|DMR_HO-Dim_500x500.jpg", "notes": "\u003Cp\u003EOnce installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 250 mm¶\u003C/br\u003E¶ANSI Metric", "grpatr": "Housing Diameter - Dh (mm)|Housing Diameter - Dh (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2520", "clsnbr": "0902021605", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MHO - Internal Housing Ring", "catnm5": "MHO-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "Daemar-DMR-Retaining-Ring-HO-Series-300x300.jpg|DMR_HO-Dim_500x500.jpg", "notes": "\u003Cp\u003EOnce installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/span\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 8 mm - 250 mm¶\u003C/br\u003E¶ANSI Metric", "grpatr": "Housing Diameter - Dh (mm)|Housing Diameter - Dh (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "1819", "clsnbr": "09020217", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MRE - External Reinforced E Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog-RE_300x300.jpg", "notes": "External Reinforced, ANSI Metric E Ring - The MRE retaining ring is a reinforced version of the ME ring. which will accommodate higher thrust loadings and RPM. MRE rings function in the same groove as regular E rings, so that you can change from one to the other without re-engineering the application.¶\u003C/br\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 4 mm - 15 mm¶¶¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "2558", "clsnbr": "0902021701", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MRE - External Reinforced E Ring", "catnm5": "MRE-H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog-RE_300x300.jpg|DMR_RE-Dim_800x800.jpg", "notes": "The MRE retaining ring is a reinforced version of the ME ring. which will accommodate higher thrust loadings and RPM. MRE rings function in the same groove as regular E rings, so that you can change from one to the other without re-engineering the application.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel ¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 4 mm - 15 mm¶\u003C/br\u003EANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "1197", "clsnbr": "0902021702", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MRE - External Reinforced E Ring", "catnm5": "MRE-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog-RE_300x300.jpg|DMR_RE-Dim_800x800.jpg", "notes": "The MRE retaining ring is a reinforced version of the ME ring. which will accommodate higher thrust loadings and RPM. MRE rings function in the same groove as regular E rings, so that you can change from one to the other without re-engineering the application.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 4 mm - 15 mm¶\u003C/br\u003EANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2559", "clsnbr": "0902021703", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MRE - External Reinforced E Ring", "catnm5": "MRE-ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog-RE_300x300.jpg|DMR_RE-Dim_800x800.jpg", "notes": "\u003Cp\u003EThe MRE retaining ring is a reinforced version of the ME ring. which will accommodate higher thrust loadings and RPM. MRE rings function in the same groove as regular E rings, so that you can change from one to the other without re-engineering the application.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 4 mm - 15 mm¶\u003C/br\u003EANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2561", "clsnbr": "0902021704", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MRE - External Reinforced E Ring", "catnm5": "MRE-ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog-RE_300x300.jpg|DMR_RE-Dim_800x800.jpg", "notes": "\u003Cp\u003EThe MRE retaining ring is a reinforced version of the ME ring. which will accommodate higher thrust loadings and RPM. MRE rings function in the same groove as regular E rings, so that you can change from one to the other without re-engineering the application.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cbr /\u003ESize Range:\u003C/b\u003E 4 mm - 15 mm¶\u003C/br\u003EANSI Metric¶", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2560", "clsnbr": "0902021705", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MRE - External Reinforced E Ring", "catnm5": "MRE-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog-RE_300x300.jpg|DMR_RE-Dim_800x800.jpg", "notes": "\u003Cp\u003EThe MRE retaining ring is a reinforced version of the ME ring. which will accommodate higher thrust loadings and RPM. MRE rings function in the same groove as regular E rings, so that you can change from one to the other without re-engineering the application.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 4 mm - 15 mm¶\u003C/br\u003EANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "1826", "clsnbr": "09020218", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MSH - External Shaft Ring", "catnm5": "", "imgnme": "DMR_SH_for_Catalog-300x300.jpg", "notes": "External, ANSI Metric Shaft Ring - Once installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.¶¶\u003Cb\u003ESize Range:\u003C/b\u003E 4 mm - 100 mm", "grpatr": "", "grpflg": "N" }, { "clsnam": "2522", "clsnbr": "0902021801", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MSH - External Shaft Ring", "catnm5": "MSH-H - Stainless Steel", "imgnme": "DMR_SH_for_Catalog-300x300.jpg|DMR_SH-Dim_500x500.jpg", "notes": "Once installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel \u003Cbr /\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 4 mm - 100 mm¶¶\u003C/br\u003E¶ ANSI Metric¶", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "1193", "clsnbr": "0902021802", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MSH - External Shaft Ring", "catnm5": "MSH-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_SH_for_Catalog-300x300.jpg|DMR_SH-Dim_500x500.jpg", "notes": "Once installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 4 mm - 100 mm¶\u003C/br\u003E¶ ANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2523", "clsnbr": "0902021803", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MSH - External Shaft Ring", "catnm5": "MSH-ZD - Zinc Dichromate", "imgnme": "DMR_SH_for_Catalog-300x300.jpg|DMR_SH-Dim_500x500.jpg", "notes": "\u003Cp\u003EOnce installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 4 mm - 100 mm¶\u003C/br\u003E¶ANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2525", "clsnbr": "0902021804", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MSH - External Shaft Ring", "catnm5": "MSH-ZF - Zinc Bright", "imgnme": "DMR_SH_for_Catalog-300x300.jpg|DMR_SH-Dim_500x500.jpg", "notes": "\u003Cp\u003EOnce installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting\u003C/p\u003E¶\u003Cb\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 4 mm - 100 mm¶\u003C/br\u003E¶ANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2524", "clsnbr": "0902021805", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MSH - External Shaft Ring", "catnm5": "MSH-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_SH_for_Catalog-300x300.jpg|DMR_SH-Dim_500x500.jpg", "notes": "\u003Cp\u003EOnce installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a \u0022shoulder\u0022) holds an assembly in place.\u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cb\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E 4 mm - 100 mm¶\u003C/br\u003E¶ANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "1821", "clsnbr": "09020219", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MSR - External Shaft Reinforced Ring", "catnm5": "", "imgnme": "Daemar-DMR-Retaining-Ring-SHR-Series-300x300.jpg", "notes": "External, ANSI Metric Shaft Reinforced Ring - The MSR is an extra thick vision of a regular MSH retaining ring. As such, it is stronger and can withstand greater trust loads than its standard counterpart.¶¶\u003Cb\u003ESize Range:\u003C/b\u003E 10 mm - 50 mm¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "2526", "clsnbr": "0902021901", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MSR - External Shaft Reinforced Ring", "catnm5": "MSR-H - Stainless", "imgnme": "Daemar-DMR-Retaining-Ring-SHR-Series-300x300.jpg|DMR_SHR-Image-01.jpg", "notes": "The MSR is an extra thick vision of a regular MSH retaining ring. As such, it is stronger and can withstand greater trust loads than its standard counterpart.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel ¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 10 mm - 50 mm¶¶\u003C/br\u003E¶ANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "1194", "clsnbr": "0902021902", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MSR - External Shaft Reinforced Ring", "catnm5": "MSR-PA - Carbon Steel Phosphate Coating", "imgnme": "Daemar-DMR-Retaining-Ring-SHR-Series-300x300.jpg|DMR_SHR-Image-01.jpg", "notes": "The MSR is an extra thick vision of a regular MSH retaining ring. As such, it is stronger and can withstand greater trust loads than its standard counterpart.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 10 mm - 50 mm¶\u003C/br\u003EANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2527", "clsnbr": "0902021903", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MSR - External Shaft Reinforced Ring", "catnm5": "MSR-ZD - Zinc Dichromate", "imgnme": "Daemar-DMR-Retaining-Ring-SHR-Series-300x300.jpg|DMR_SHR-Image-01.jpg", "notes": "The MSR is an extra thick vision of a regular MSH retaining ring. As such, it is stronger and can withstand greater trust loads than its standard counterpart.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: ZD Zinc Dichromate ¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 10 mm - 50 mm¶\u003C/br\u003EANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2529", "clsnbr": "0902021904", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MSR - External Shaft Reinforced Ring", "catnm5": "MSR-ZF - Zinc Bright", "imgnme": "Daemar-DMR-Retaining-Ring-SHR-Series-300x300.jpg|DMR_SHR-Image-01.jpg", "notes": "The MSR is an extra thick vision of a regular MSH retaining ring. As such, it is stronger and can withstand greater trust loads than its standard counterpart.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Zinc Bright ¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 10 mm - 50 mm¶\u003C/br\u003EANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "2528", "clsnbr": "0902021905", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Metric Retaining Rings", "catnm4": "MSR - External Shaft Reinforced Ring", "catnm5": "MSR-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "Daemar-DMR-Retaining-Ring-SHR-Series-300x300.jpg|DMR_SHR-Image-01.jpg", "notes": "The MSR is an extra thick vision of a regular MSH retaining ring. As such, it is stronger and can withstand greater trust loads than its standard counterpart.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 10 mm - 50 mm¶\u003C/br\u003EANSI Metric", "grpatr": "Shaft Diameter - Ds (mm)|Shaft Diameter - Ds (in)|Ring Free Diameter - Df (mm)|Ring Thickness - T (mm)", "grpflg": "Y" }, { "clsnam": "1050", "clsnbr": "090203", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "", "catnm5": "", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg", "notes": "Rotor Clip radial retaining rings are radially installed into machined grooves on shafts. They don\u0027t have lugs or lug holes and do not extend as far around the circumference of the grooves as their axial counterparts. Consequently, they can be installed quickly using Rotor Clip applicators and dispensers. Rotor Clip radial retaining rings are also available stacked (excluding the LC rings).¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "2396", "clsnbr": "09020301", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "C - External Crescent Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog-C_300x300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2407", "clsnbr": "0902030101", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "C - External Crescent Ring", "catnm5": "C-H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog-C_300x300.jpg|DMR_C-Image-01.jpg", "notes": "Ideal for low clearance applications where radial installation is preferred.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel ¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .125 in - 2.000 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1165", "clsnbr": "0902030102", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "C - External Crescent Ring", "catnm5": "C-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog-C_300x300.jpg|DMR_C-Image-01.jpg", "notes": "Ideal for low clearance applications where radial installation is preferred.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate \u003Cbr /\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Cbr /\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .125 in - 2.000 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2408", "clsnbr": "0902030103", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "C - External Crescent Ring", "catnm5": "C-ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog-C_300x300.jpg|DMR_C-Image-01.jpg", "notes": "Ideal for low clearance applications where radial installation is preferred.\u003Cbr /\u003E\u003Cbr /\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003E This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003C/p\u003E¶\u003Cb\u003ESize Range:\u003C/b\u003E .125 in - 2.000 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2410", "clsnbr": "0902030104", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "C - External Crescent Ring", "catnm5": "C-ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog-C_300x300.jpg|DMR_C-Image-01.jpg", "notes": "Ideal for low clearance applications where radial installation is preferred.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Zinc Bright ¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003C/p\u003E¶\u003Cb\u003ESize Range:\u003C/b\u003E .125 in - 2.000 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2409", "clsnbr": "0902030105", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "C - External Crescent Ring", "catnm5": "C-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog-C_300x300.jpg|DMR_C-Image-01.jpg", "notes": "Ideal for low clearance applications where radial installation is preferred.\u003Cbr /\u003E\u003Cbr /\u003E¶\u003Cp\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/p\u003E¶\u003Cb\u003ESize Range:\u003C/b\u003E .125 in - 2.000 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2394", "clsnbr": "09020302", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "E - External E Ring", "catnm5": "", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "1166", "clsnbr": "0902030201", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "E - External E Ring", "catnm5": "E-H - Stainless Steel", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_E-Dim_800x800.jpg", "notes": "Perhaps the most popular and widely used radial retaining ring is the \u0022E\u0022 (so named because it is shaped like the letter \u0022E\u0022.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.\u003Cbr /\u003EMaterial Finish/Code: Stainless steel (PH15-7 MO) \u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .040 in - 1.375 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2399", "clsnbr": "0902030202", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "E - External E Ring", "catnm5": "E-PA - Carbon Steel Phosphate Coating", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_E-Dim_800x800.jpg", "notes": "Perhaps the most popular and widely used radial retaining ring is the \u0022E\u0022 (so named because it is shaped like the letter \u0022E\u0022.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish Phosphate \u003Cbr /\u003EMateral Code Carbpn Steel (Sae 1060-1090/UNS G10600-G10900)\u003Cbr /\u003EThis standard finish is recommended over unfinished plain steel since it offers an extedned shelf-life protection against rusting. ROHS \u0026 ELV Compliant. \u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .040 in - 1.375 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2400", "clsnbr": "0902030203", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "E - External E Ring", "catnm5": "E-ZD - Zinc Dichromate", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_E-Dim_800x800.jpg", "notes": "Perhaps the most popular and widely used radial retaining ring is the \u0022E\u0022 (so named because it is shaped like the letter \u0022E\u0022.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.\u003Cbr /\u003EMaterial Finish: ZD Zinc Dichromate \u003Cbr /\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .040 in - 1.375 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2402", "clsnbr": "0902030204", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "E - External E Ring", "catnm5": "E-ZF - Zinc Bright", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_E-Dim_800x800.jpg", "notes": "Perhaps the most popular and widely used radial retaining ring is the \u0022E\u0022 (so named because it is shaped like the letter \u0022E\u0022.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate \u003Cbr /\u003EMaterial Codes: Zinc Bright \u003Cbr /\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Cbr /\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .040 in - 1.375 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2401", "clsnbr": "0902030205", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "E - External E Ring", "catnm5": "E-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "Daemar-DMR-Retaining-Ring-E-Series-300x300.jpg|DMR_E-Dim_800x800.jpg", "notes": "Perhaps the most popular and widely used radial retaining ring is the \u0022E\u0022 (so named because it is shaped like the letter \u0022E\u0022.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate \u003Cbr /\u003EMaterial Codes: Z3X Trivalent Chromate Zinc Plus Sealer\u003Cbr /\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Cbr /\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .040 in - 1.375 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2397", "clsnbr": "09020303", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "LC - External Interlocking Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog-LC_300x300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2411", "clsnbr": "0902030301", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "LC - External Interlocking Ring", "catnm5": "LC-H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog-LC_300x300.jpg|DMR_LC-Image-01.jpg", "notes": "The LC ring is produced in two identical halves. The ends interlock into a groove on a shaft and. once assembled. are dynamically balanced. As a result. they are particularly effective at retaining assemblies with extremely high rotational speeds.\u003Cbr /\u003E\u003Cbr /\u003E¶\u003Cp\u003EMaterial Finish/Code: Stainless Steel \u003C/p\u003E¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .469 in - 3.375 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1168", "clsnbr": "0902030302", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "LC - External Interlocking Ring", "catnm5": "LC-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog-LC_300x300.jpg|DMR_LC-Image-01.jpg", "notes": "The LC ring is produced in two identical halves. The ends interlock into a groove on a shaft and. once assembled. are dynamically balanced. As a result. they are particularly effective at retaining assemblies with extremely high rotational speeds.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .469 in - 3.375 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2412", "clsnbr": "0902030303", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "LC - External Interlocking Ring", "catnm5": "LC-ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog-LC_300x300.jpg|DMR_LC-Image-01.jpg", "notes": "\u003Cp\u003EThe LC ring is produced in two identical halves. The ends interlock into a groove on a shaft and. once assembled. are dynamically balanced. As a result. they are particularly effective at retaining assemblies with extremely high rotational speeds.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .469 in - 3.375 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2414", "clsnbr": "0902030304", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "LC - External Interlocking Ring", "catnm5": "LC-ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog-LC_300x300.jpg|DMR_LC-Image-01.jpg", "notes": "\u003Cp\u003EThe LC ring is produced in two identical halves. The ends interlock into a groove on a shaft and. once assembled. are dynamically balanced. As a result. they are particularly effective at retaining assemblies with extremely high rotational speeds.\u003C/p\u003E¶\u003Cp\u003E Material Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .469 in - 3.375 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2413", "clsnbr": "0902030305", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "LC - External Interlocking Ring", "catnm5": "LC-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog-LC_300x300.jpg|DMR_LC-Image-01.jpg", "notes": "\u003Cp\u003EThe LC ring is produced in two identical halves. The ends interlock into a groove on a shaft and. once assembled. are dynamically balanced. As a result. they are particularly effective at retaining assemblies with extremely high rotational speeds.\u003C/p\u003E¶\u003Cp\u003E \u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .469 in - 3.375 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2398", "clsnbr": "09020304", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "PO/POL - External Poodle/Poodle Light Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog-POL_300x300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2415", "clsnbr": "0902030401", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "PO/POL - External Poodle/Poodle Light Ring", "catnm5": "PO/POL-H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog-POL_300x300.jpg|DMR_PO-POL-Image-01.jpg", "notes": "The PO ring features wide \u0022ears\u0022 (resembling those of a poodle dog. thus the name) which offer extra retention surface against the retained part. PO rings also come in thinner sizes as a standard series of rings known as POL.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel ¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .156 in - 2.000 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1169", "clsnbr": "0902030402", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "PO/POL - External Poodle/Poodle Light Ring", "catnm5": "PO/POL-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog-POL_300x300.jpg|DMR_PO-POL-Image-01.jpg", "notes": "The PO ring features wide \u0022ears\u0022 (resembling those of a poodle dog. thus the name) which offer extra retention surface against the retained part. PO rings also come in thinner sizes as a standard series of rings known as POL.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .156 in - 2.000 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2416", "clsnbr": "0902030403", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "PO/POL - External Poodle/Poodle Light Ring", "catnm5": "PO/POL-ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog-POL_300x300.jpg|DMR_PO-POL-Image-01.jpg", "notes": "\u003Cp\u003EThe PO ring features wide \u0022ears\u0022 (resembling those of a poodle dog. thus the name) which offer extra retention surface against the retained part. PO rings also come in thinner sizes as a standard series of rings known as POL.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .156 in - 2.000 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2418", "clsnbr": "0902030404", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "PO/POL - External Poodle/Poodle Light Ring", "catnm5": "PO/POL-ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog-POL_300x300.jpg|DMR_PO-POL-Image-01.jpg", "notes": "\u003Cp\u003EThe PO ring features wide \u0022ears\u0022 (resembling those of a poodle dog. thus the name) which offer extra retention surface against the retained part. PO rings also come in thinner sizes as a standard series of rings known as POL.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-fareast-language: EN-US; mso-fareast-theme-font: minor-latin; mso-bidi-theme-font: minor-bidi; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .156 in - 2.000 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2417", "clsnbr": "0902030405", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "PO/POL - External Poodle/Poodle Light Ring", "catnm5": "PO/POL-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog-POL_300x300.jpg|DMR_PO-POL-Image-01.jpg", "notes": "\u003Cp\u003EThe PO ring features wide \u0022ears\u0022 (resembling those of a poodle dog. thus the name) which offer extra retention surface against the retained part. PO rings also come in thinner sizes as a standard series of rings known as POL.\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-fareast-language: EN-US; mso-fareast-theme-font: minor-latin; mso-bidi-theme-font: minor-bidi; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .156 in - 2.000 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2395", "clsnbr": "09020305", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "RE - External Reinforced E Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog-RE_300x300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2403", "clsnbr": "0902030501", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "RE - External Reinforced E Ring", "catnm5": "RE-H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog-RE_300x300.jpg|DMR_RE-Dim_800x800.jpg", "notes": "The RE retaining ring is a reinforced version of the E ring. which will accommodate higher thrust loadings and RPM. RE rings function in the same groove as regular E rings. so that you can change from one to the other without re-engineering the application.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel \u003Cbr /\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E .094 in - .562 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1167", "clsnbr": "0902030502", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "RE - External Reinforced E Ring", "catnm5": "RE-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog-RE_300x300.jpg|DMR_RE-Dim_800x800.jpg", "notes": "The RE retaining ring is a reinforced version of the E ring. which will accommodate higher thrust loadings and RPM. RE rings function in the same groove as regular E rings. so that you can change from one to the other without re-engineering the application.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate \u003Cbr /\u003EMaterial Codes: Carbon Steel \u003Cbr /\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Cbr /\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .094 in - .562 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2404", "clsnbr": "0902030503", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "RE - External Reinforced E Ring", "catnm5": "RE-ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog-RE_300x300.jpg|DMR_RE-Dim_800x800.jpg", "notes": "The RE retaining ring is a reinforced version of the E ring. which will accommodate higher thrust loadings and RPM. RE rings function in the same groove as regular E rings. so that you can change from one to the other without re-engineering the application.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: ZD Zinc Dichromate \u003Cbr /\u003EMaterial Code: Carbon Steel \u003Cbr /\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Cbr /\u003E\u003Cbr /\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement\u003Cb\u003E.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E .094 in - .562 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2406", "clsnbr": "0902030504", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "RE - External Reinforced E Ring", "catnm5": "RE-ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog-RE_300x300.jpg|DMR_RE-Dim_800x800.jpg", "notes": "The RE retaining ring is a reinforced version of the E ring. which will accommodate higher thrust loadings and RPM. RE rings function in the same groove as regular E rings. so that you can change from one to the other without re-engineering the application.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Codes: Zinc Bright \u003Cbr /\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Cbr /\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003Cb\u003E\u003Cbr /\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E .094 in - .562 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2405", "clsnbr": "0902030505", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Radially Assembled Rings", "catnm4": "RE - External Reinforced E Ring", "catnm5": "RE-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog-RE_300x300.jpg|DMR_RE-Dim_800x800.jpg", "notes": "The RE retaining ring is a reinforced version of the E ring. which will accommodate higher thrust loadings and RPM. RE rings function in the same groove as regular E rings. so that you can change from one to the other without re-engineering the application.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Cbr /\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Cbr /\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cb\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E .094 in - .562 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1049", "clsnbr": "090204", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog_BSH_300X300.jpg", "notes": "Rotor Clip bowed retaining rings are designed to compensate for accumulated tolerances in assemblies. Once snapped into the groove, bowed rings exert a force or \u0022preload\u0022 on the retained parts made to the low side of the tolerances \u0022snugging\u0022 everything up. They also act like a spring and \u0022give\u0022 when parts made to the high side of the tolerances extend too far into the groove.", "grpatr": "", "grpflg": "N" }, { "clsnam": "2423", "clsnbr": "09020401", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "BE - External Bowed E Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog_BE_300X300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2446", "clsnbr": "0902040101", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "BE - External Bowed E Ring", "catnm5": "BE- H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog_BE_300X300.jpg|DMR_BE-Image-01.jpg", "notes": "Compensating for accumulated tolerances is what a BE \u0022Bowed\u0022 retaining ring is designed to do on a shaft. Once snapped into the groove. bowed rings exert a force or a \u0022preload\u0022 on the retained parts for the range specified on the BE size range chart.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish/Code: Stainless Steel ¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cb\u003ESize Range:\u003C/b\u003E .110 in - .984 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1163", "clsnbr": "0902040102", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "BE - External Bowed E Ring", "catnm5": "BE- PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog_BE_300X300.jpg|DMR_BE-Image-01.jpg", "notes": "Compensating for accumulated tolerances is what a BE \u0022Bowed\u0022 retaining ring is designed to do on a shaft. Once snapped into the groove. bowed rings exert a force or a \u0022preload\u0022 on the retained parts for the range specified on the BE size range chart.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .110 in - .984 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2447", "clsnbr": "0902040103", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "BE - External Bowed E Ring", "catnm5": "BE- ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog_BE_300X300.jpg|DMR_BE-Image-01.jpg", "notes": "\u003Cp\u003ECompensating for accumulated tolerances is what a BE \u0022Bowed\u0022 retaining ring is designed to do on a shaft. Once snapped into the groove. bowed rings exert a force or a \u0022preload\u0022 on the retained parts for the range specified on the BE size range chart.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003C/p\u003E¶\u003Cb\u003ESize Range:\u003C/b\u003E .110 in - .984 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2449", "clsnbr": "0902040104", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "BE - External Bowed E Ring", "catnm5": "BE- ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog_BE_300X300.jpg|DMR_BE-Image-01.jpg", "notes": "\u003Cp\u003ECompensating for accumulated tolerances is what a BE \u0022Bowed\u0022 retaining ring is designed to do on a shaft. Once snapped into the groove. bowed rings exert a force or a \u0022preload\u0022 on the retained parts for the range specified on the BE size range chart.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting.\u003C/p\u003E¶\u003Cb\u003ESize Range:\u003C/b\u003E .110 in - .984 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2448", "clsnbr": "0902040105", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "BE - External Bowed E Ring", "catnm5": "BE- Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog_BE_300X300.jpg|DMR_BE-Image-01.jpg", "notes": "\u003Cp\u003ECompensating for accumulated tolerances is what a BE \u0022Bowed\u0022 retaining ring is designed to do on a shaft. Once snapped into the groove. bowed rings exert a force or a \u0022preload\u0022 on the retained parts for the range specified on the BE size range chart.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/span\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003C/p\u003E¶\u003Cb\u003ESize Range:\u003C/b\u003E .110 in - .984 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2419", "clsnbr": "09020402", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "BHO - Internal Bowed Housing Ring", "catnm5": "", "imgnme": "Daemar-DMR-Retaining-Ring-BHO-Series-300x300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2431", "clsnbr": "0902040201", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "BHO - Internal Bowed Housing Ring", "catnm5": "BHO- ZD - Zinc Dichromate", "imgnme": "Daemar-DMR-Retaining-Ring-BHO-Series-300x300.jpg|DMR_BHO-Image-01.jpg", "notes": "\u003Cp\u003ECompensating for accumulated tolerances is what a BHO retaining ring is designed to do in a housing/bore. Once snapped into the groove. bowed rings exert a force or \u0022preload\u0022 on the retained parts for the range specified on the BHO size range chart.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .250 in - 1.750 in", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2433", "clsnbr": "0902040202", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "BHO - Internal Bowed Housing Ring", "catnm5": "BHO- ZF - Zinc Brigh", "imgnme": "Daemar-DMR-Retaining-Ring-BHO-Series-300x300.jpg|DMR_BHO-Image-01.jpg", "notes": "\u003Cp\u003ECompensating for accumulated tolerances is what a BHO retaining ring is designed to do in a housing/bore. Once snapped into the groove. bowed rings exert a force or \u0022preload\u0022 on the retained parts for the range specified on the BHO size range chart.\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003E\u003Co:p\u003EMaterial Finish: Zinc Bright ¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003C/p\u003E¶\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .250 in - 1.750 in\u003C/p\u003E", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2432", "clsnbr": "0902040203", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "BHO - Internal Bowed Housing Ring", "catnm5": "BHO- Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "Daemar-DMR-Retaining-Ring-BHO-Series-300x300.jpg|DMR_BHO-Image-01.jpg", "notes": "\u003Cp\u003ECompensating for accumulated tolerances is what a BHO retaining ring is designed to do in a housing/bore. Once snapped into the groove. bowed rings exert a force or \u0022preload\u0022 on the retained parts for the range specified on the BHO size range chart.\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .250 in - 1.750 in", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2430", "clsnbr": "0902040204", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "BHO - Internal Bowed Housing Ring", "catnm5": "BHO-H - Stainless Steel", "imgnme": "Daemar-DMR-Retaining-Ring-BHO-Series-300x300.jpg|DMR_BHO-Image-01.jpg", "notes": "\u003Cp\u003ECompensating for accumulated tolerances is what a BHO retaining ring is designed to do in a housing/bore. Once snapped into the groove. bowed rings exert a force or \u0022preload\u0022 on the retained parts for the range specified on the BHO size range chart.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish/Code: Stainless Steel \u003C/p\u003E¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .250 in - 1.750 in", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1159", "clsnbr": "0902040205", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "BHO - Internal Bowed Housing Ring", "catnm5": "BHO-PA - Carbon Steel Phosphate Coating", "imgnme": "Daemar-DMR-Retaining-Ring-BHO-Series-300x300.jpg|DMR_BHO-Image-01.jpg", "notes": "\u003Cp\u003ECompensating for accumulated tolerances is what a BHO retaining ring is designed to do in a housing/bore. Once snapped into the groove. bowed rings exert a force or \u0022preload\u0022 on the retained parts for the range specified on the BHO size range chart.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Phosphate \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .250 in - 1.750 in", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2420", "clsnbr": "09020403", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "BSH - External Bowed Shaft Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog_BSH_300X300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2434", "clsnbr": "0902040301", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "BSH - External Bowed Shaft Ring", "catnm5": "BSH-H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog_BSH_300X300.jpg|DMR_BSH-Image-01.jpg", "notes": "Compensating for accumulated tolerances is what a BSH \u0022bowed\u0022 retaining ring is designed to do on a shaft. Once snapped into the groove. bowed rings exert a force or \u0022preload\u0022 on the retained parts for the range specified on the BSH size range chart.\u003Cbr /\u003E¶\u003Cp\u003EMaterial Finish/Code: Stainless Steel \u003C/p\u003E¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .250 in - 1.750 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1160", "clsnbr": "0902040302", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "BSH - External Bowed Shaft Ring", "catnm5": "BSH-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog_BSH_300X300.jpg|DMR_BSH-Image-01.jpg", "notes": "Compensating for accumulated tolerances is what a BSH \u0022bowed\u0022 retaining ring is designed to do on a shaft. Once snapped into the groove. bowed rings exert a force or \u0022preload\u0022 on the retained parts for the range specified on the BSH size range chart.\u003Cbr /\u003E¶\u003Cp\u003EMaterial Finish: Phosphate \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .250 in - 1.750 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2435", "clsnbr": "0902040303", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "BSH - External Bowed Shaft Ring", "catnm5": "BSH-ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog_BSH_300X300.jpg|DMR_BSH-Image-01.jpg", "notes": "Compensating for accumulated tolerances is what a BSH \u0022bowed\u0022 retaining ring is designed to do on a shaft. Once snapped into the groove. bowed rings exert a force or \u0022preload\u0022 on the retained parts for the range specified on the BSH size range chart.\u003Cbr /\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .250 in - 1.750 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2437", "clsnbr": "0902040304", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "BSH - External Bowed Shaft Ring", "catnm5": "BSH-ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog_BSH_300X300.jpg|DMR_BSH-Image-01.jpg", "notes": "\u003Cp\u003ECompensating for accumulated tolerances is what a BSH \u0022bowed\u0022 retaining ring is designed to do on a shaft. Once snapped into the groove. bowed rings exert a force or \u0022preload\u0022 on the retained parts for the range specified on the BSH size range chart.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .250 in - 1.750 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2424", "clsnbr": "09020404", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "EL - External Bowed Locking Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog-EL_300X300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2450", "clsnbr": "0902040401", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "EL - External Bowed Locking Ring", "catnm5": "EL-H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog-EL_300X300.jpg|DMR_EL-Image.jpg", "notes": "\u003Cp\u003EAnother variation of a bowed E ring is the EL. In addition to the bowed design for eliminating \u0022play\u0022 in an assembly. it also features two prongs. which extend from the inner circumference to the open end locking the ring firmly into place.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish/Code: Stainless Steel \u003C/p\u003E¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .092 in - .375 in", "grpatr": "Shaft Diameter - Ds (in)|Ring Length Diameter - B (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1164", "clsnbr": "0902040402", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "EL - External Bowed Locking Ring", "catnm5": "EL-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog-EL_300X300.jpg|DMR_EL-Image.jpg", "notes": "Another variation of a bowed E ring is the EL. In addition to the bowed design for eliminating \u0022play\u0022 in an assembly. it also features two prongs. which extend from the inner circumference to the open end locking the ring firmly into place.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .092 in - .375 in", "grpatr": "Shaft Diameter - Ds (in)|Ring Length Diameter - B (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2451", "clsnbr": "0902040403", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "EL - External Bowed Locking Ring", "catnm5": "EL-ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog-EL_300X300.jpg|DMR_EL-Image.jpg", "notes": "\u003Cp\u003EAnother variation of a bowed E ring is the EL. In addition to the bowed design for eliminating \u0022play\u0022 in an assembly. it also features two prongs. which extend from the inner circumference to the open end locking the ring firmly into place.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .092 in - .375 in", "grpatr": "Shaft Diameter - Ds (in)|Ring Length Diameter - B (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2453", "clsnbr": "0902040404", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "EL - External Bowed Locking Ring", "catnm5": "EL-ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog-EL_300X300.jpg|DMR_EL-Image.jpg", "notes": "\u003Cp\u003EAnother variation of a bowed E ring is the EL. In addition to the bowed design for eliminating \u0022play\u0022 in an assembly. it also features two prongs. which extend from the inner circumference to the open end locking the ring firmly into place.\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003E\u003Co:p\u003EMaterial Finish: Zinc Bright ¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting.\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .092 in - .375 in\u003C/p\u003E", "grpatr": "Shaft Diameter - Ds (in)|Ring Length Diameter - B (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2452", "clsnbr": "0902040405", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "EL - External Bowed Locking Ring", "catnm5": "EL-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog-EL_300X300.jpg|DMR_EL-Image.jpg", "notes": "\u003Cp\u003EAnother variation of a bowed E ring is the EL. In addition to the bowed design for eliminating \u0022play\u0022 in an assembly. it also features two prongs. which extend from the inner circumference to the open end locking the ring firmly into place.\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .092 in - .375 in", "grpatr": "Shaft Diameter - Ds (in)|Ring Length Diameter - B (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2421", "clsnbr": "09020405", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "VHO - Internal Beveled Housing Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog_VHO_300X300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2438", "clsnbr": "0902040501", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "VHO - Internal Beveled Housing Ring", "catnm5": "VHO - H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog_VHO_300X300.jpg|DMR_VHO-Image-01.jpg", "notes": "\u003Cp\u003EThese rings look exactly like their HO counterpart. only they have a 15\u0026ordm; angle on the outer edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the groove and the retained part.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish/Code: Stainless Steel \u003C/p\u003E¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range: \u003C/b\u003E1.000 in - 10.0 in", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1161", "clsnbr": "0902040502", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "VHO - Internal Beveled Housing Ring", "catnm5": "VHO - PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog_VHO_300X300.jpg|DMR_VHO-Image-01.jpg", "notes": "These rings look exactly like their HO counterpart. only they have a 15\u0026ordm; angle on the outer edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the groove and the retained part.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range: \u003C/b\u003E1.000 in - 10.0 in", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2439", "clsnbr": "0902040503", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "VHO - Internal Beveled Housing Ring", "catnm5": "VHO - ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog_VHO_300X300.jpg|DMR_VHO-Image-01.jpg", "notes": "\u003Cp\u003EThese rings look exactly like their HO counterpart. only they have a 15\u0026ordm; angle on the outer edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the groove and the retained part.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range: \u003C/b\u003E1.000 in - 10.0 in", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2441", "clsnbr": "0902040504", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "VHO - Internal Beveled Housing Ring", "catnm5": "VHO - ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog_VHO_300X300.jpg|DMR_VHO-Image-01.jpg", "notes": "\u003Cp\u003EThese rings look exactly like their HO counterpart. only they have a 15\u0026ordm; angle on the outer edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the groove and the retained part.\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003E\u003Co:p\u003EMaterial Finish: Zinc Bright ¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003C/p\u003E¶\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range: \u003C/b\u003E1.000 in - 10.0 in\u003C/p\u003E", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2440", "clsnbr": "0902040505", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "VHO - Internal Beveled Housing Ring", "catnm5": "VHO - Z3X -Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog_VHO_300X300.jpg|DMR_VHO-Image-01.jpg", "notes": "\u003Cp\u003EThese rings look exactly like their HO counterpart. only they have a 15\u0026ordm; angle on the outer edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the groove and the retained part.\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range: \u003C/b\u003E1.000 in - 10.0 in", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2422", "clsnbr": "09020406", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "VSH - External Beveled Shaft Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog_VSH_300X300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2442", "clsnbr": "0902040601", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "VSH - External Beveled Shaft Ring", "catnm5": "VSH-H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog_VSH_300X300.jpg|DMR_VSH-Image-01.jpg", "notes": "These rings look exactly like their SH counterpart. only they have a 15\u0026ordm; angle on the inner edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the groove and the retained part.\u003Cbr /\u003E\u003Cbr /\u003E¶\u003Cp\u003EMaterial Finish/Code: Stainless Steel \u003C/p\u003E¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 1.000 in - 10.0 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1162", "clsnbr": "0902040602", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "VSH - External Beveled Shaft Ring", "catnm5": "VSH-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog_VSH_300X300.jpg|DMR_VSH-Image-01.jpg", "notes": "These rings look exactly like their SH counterpart. only they have a 15\u0026ordm; angle on the inner edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the groove and the retained part.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 1.000 in - 10.0 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2443", "clsnbr": "0902040603", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "VSH - External Beveled Shaft Ring", "catnm5": "VSH-ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog_VSH_300X300.jpg|DMR_VSH-Image-01.jpg", "notes": "\u003Cp\u003EThese rings look exactly like their SH counterpart. only they have a 15\u0026ordm; angle on the inner edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the groove and the retained part.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 1.000 in - 10.0 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2445", "clsnbr": "0902040604", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "VSH - External Beveled Shaft Ring", "catnm5": "VSH-ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog_VSH_300X300.jpg|DMR_VSH-Image-01.jpg", "notes": "\u003Cp\u003EThese rings look exactly like their SH counterpart. only they have a 15\u0026ordm; angle on the inner edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the groove and the retained part.\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003E\u003Co:p\u003EMaterial Finish: Zinc Bright \u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003C/p\u003E¶\u003Cp\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 1.000 in - 10.0 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2444", "clsnbr": "0902040605", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Rings Used for End-Play Take Up", "catnm4": "VSH - External Beveled Shaft Ring", "catnm5": "VSH-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog_VSH_300X300.jpg|DMR_VSH-Image-01.jpg", "notes": "\u003Cp\u003EThese rings look exactly like their SH counterpart. only they have a 15\u0026ordm; angle on the inner edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the groove and the retained part.\u003C/p\u003E¶\u003Cp\u003E \u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E 1.000 in - 10.0 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1051", "clsnbr": "090205", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "", "catnm5": "", "imgnme": "Daemar-DMR-Retaining-Ring-TX-Series-300x300.jpg", "notes": "Rotor Clip self-locking retaining rings can be installed on a shaft or in a housing/bore without using a groove. They save machining time and overall costs since a groove is not needed for installation. They also come in small sizes (some fitting shafts as small as .058\u0022 in diameter) and can be used effectively and economically on small applications with very low thrust loadings. Most self-locking retaining rings can not be easily removed once installed. ¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "2426", "clsnbr": "09020501", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "RG - External Radial Grip Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog_RG_300X300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "1171", "clsnbr": "0902050101", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "RG - External Radial Grip Ring", "catnm5": "RG -PA- Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog_RG_300X300.jpg|DMR_RG-Dim_800x181.jpg", "notes": "\u003Cp\u003EThe RG makes indentations on either side of the groove once installed which significantly increases its holding power. It can also be installed directly against the face of the retained part. virtually eliminating end play. Automated installation using a Rock Kick Jr. pneumatic installation tool. (Note; this product works only on \u0022soft\u0022 shafts.)\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Phosphate \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .092 in - .379 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)|Ring Notch Diameter - R Ref. (in)", "grpflg": "Y" }, { "clsnam": "2461", "clsnbr": "0902050102", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "RG - External Radial Grip Ring", "catnm5": "RG-H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog_RG_300X300.jpg|DMR_RG-Dim_800x181.jpg", "notes": "\u003Cp\u003EThe RG makes indentations on either side of the groove once installed which significantly increases its holding power. It can also be installed directly against the face of the retained part. virtually eliminating end play. Automated installation using a Rock Kick Jr. pneumatic installation tool. (Note; this product works only on \u0022soft\u0022 shafts.)\u003C/p\u003E¶\u003Cp\u003EMaterial Finish/Code: Stainless Steel \u003C/p\u003E¶PH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E .092 in - .379 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)|Ring Notch Diameter - R Ref. (in)", "grpflg": "Y" }, { "clsnam": "2462", "clsnbr": "0902050103", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "RG - External Radial Grip Ring", "catnm5": "RG-ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog_RG_300X300.jpg|DMR_RG-Dim_800x181.jpg", "notes": "\u003Cp\u003EThe RG makes indentations on either side of the groove once installed which significantly increases its holding power. It can also be installed directly against the face of the retained part. virtually eliminating end play. Automated installation using a Rock Kick Jr. pneumatic installation tool. (Note; this product works only on \u0022soft\u0022 shafts.)\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003Cbr /\u003E\u003Cb\u003E\u003Cbr /\u003ESize Range:\u003C/b\u003E .092 in - .379 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)|Ring Notch Diameter - R Ref. (in)", "grpflg": "Y" }, { "clsnam": "2473", "clsnbr": "0902050104", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "RG - External Radial Grip Ring", "catnm5": "RG-ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog_RG_300X300.jpg|DMR_RG-Dim_800x181.jpg", "notes": "\u003Cp\u003EThe RG makes indentations on either side of the groove once installed which significantly increases its holding power. It can also be installed directly against the face of the retained part. virtually eliminating end play. Automated installation using a Rock Kick Jr. pneumatic installation tool. (Note; this product works only on \u0022soft\u0022 shafts.)\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting.\u003C/p\u003E¶\u003Cb\u003ESize Range:\u003C/b\u003E .092 in - .379 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)|Ring Notch Diameter - R Ref. (in)", "grpflg": "Y" }, { "clsnam": "2472", "clsnbr": "0902050105", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "RG - External Radial Grip Ring", "catnm5": "RG-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog_RG_300X300.jpg|DMR_RG-Dim_800x181.jpg", "notes": "\u003Cp\u003EThe RG makes indentations on either side of the groove once installed which significantly increases its holding power. It can also be installed directly against the face of the retained part. virtually eliminating end play. Automated installation using a Rock Kick Jr. pneumatic installation tool. (Note; this product works only on \u0022soft\u0022 shafts.)\u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cb\u003ESize Range:\u003C/b\u003E .092 in - .379 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)|Ring Notch Diameter - R Ref. (in)", "grpflg": "Y" }, { "clsnam": "2425", "clsnbr": "09020502", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "SHF - External Shaft Friction Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog_SHF_300X300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2454", "clsnbr": "0902050201", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "SHF - External Shaft Friction Ring", "catnm5": "SHF-H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog_SHF_300X300.jpg|DMR_SHF-Dim_800x181.jpg", "notes": "\u003Cp\u003EThe SHF ring resembles a regular SH ring except that it is designed to function on a shaft without a groove. The design of the ring causes it to exert significant gripping power uniformly on the shaft (except where the gap occurs.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish/Code: Stainless Steel \u003C/p\u003E¶\u003Cp\u003EPH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .058 in - .755 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1170", "clsnbr": "0902050202", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "SHF - External Shaft Friction Ring", "catnm5": "SHF-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog_SHF_300X300.jpg|DMR_SHF-Dim_800x181.jpg", "notes": "The SHF ring resembles a regular SH ring except that it is designed to function on a shaft without a groove. The design of the ring causes it to exert significant gripping power uniformly on the shaft (except where the gap occurs.\u003Cbr /\u003E\u003Cbr /\u003EMaterial Finish: Phosphate ¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .058 in - .755 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2455", "clsnbr": "0902050203", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "SHF - External Shaft Friction Ring", "catnm5": "SHF-ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog_SHF_300X300.jpg|DMR_SHF-Dim_800x181.jpg", "notes": "\u003Cp\u003EThe SHF ring resembles a regular SH ring except that it is designed to function on a shaft without a groove. The design of the ring causes it to exert significant gripping power uniformly on the shaft (except where the gap occurs.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .058 in - .755 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2457", "clsnbr": "0902050204", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "SHF - External Shaft Friction Ring", "catnm5": "SHF-ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog_SHF_300X300.jpg|DMR_SHF-Dim_800x181.jpg", "notes": "\u003Cp\u003EThe SHF ring resembles a regular SH ring except that it is designed to function on a shaft without a groove. The design of the ring causes it to exert significant gripping power uniformly on the shaft (except where the gap occurs.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting.\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .058 in - .755 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2456", "clsnbr": "0902050205", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "SHF - External Shaft Friction Ring", "catnm5": "SHF-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog_SHF_300X300.jpg|DMR_SHF-Dim_800x181.jpg", "notes": "\u003Cp\u003EThe SHF ring resembles a regular SH ring except that it is designed to function on a shaft without a groove. The design of the ring causes it to exert significant gripping power uniformly on the shaft (except where the gap occurs.\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .058 in - .755 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|Ring Free Diameter - Df (in)|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2429", "clsnbr": "09020503", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "TI - Toothed Internal \u0022Push on\u0022 Ring", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog_TI_300X300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2458", "clsnbr": "0902050301", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "TI - Toothed Internal \u0022Push on\u0022 Ring", "catnm5": "TI-H - Internal \u0022Push on\u0022 Ring ~ Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog_TI_300X300.jpg|DMR_TI-Dim_800x181.jpg", "notes": "\u003Cp\u003EThe internal version of the TY featuring a series of prongs protruding outward. The ends create interference with the housing when the ring is installed and a load introduced to the other side.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish/Code: Stainless Steel \u003C/p\u003E¶PH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .311 - 2.002 inches", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Inside Diameter - I.D. (in)|Ring Thickness - T (in)|No. Of Prongs", "grpflg": "Y" }, { "clsnam": "1174", "clsnbr": "0902050302", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "TI - Toothed Internal \u0022Push on\u0022 Ring", "catnm5": "TI-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog_TI_300X300.jpg|DMR_TI-Dim_800x181.jpg", "notes": "\u003Cp\u003EThe internal version of the TY featuring a series of prongs protruding outward. The ends create interference with the housing when the ring is installed and a load introduced to the other side.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Phosphate \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .311 - 2.002 inches", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Inside Diameter - I.D. (in)|Ring Thickness - T (in)|No. Of Prongs", "grpflg": "Y" }, { "clsnam": "2465", "clsnbr": "0902050303", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "TI - Toothed Internal \u0022Push on\u0022 Ring", "catnm5": "TI-ZD - Internal \u0022Push on\u0022 Ring ~ Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog_TI_300X300.jpg|DMR_TI-Dim_800x181.jpg", "notes": "\u003Cp\u003EThe internal version of the TY featuring a series of prongs protruding outward. The ends create interference with the housing when the ring is installed and a load introduced to the other side.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement. \u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .311 - 2.002 inches", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Inside Diameter - I.D. (in)|Ring Thickness - T (in)|No. Of Prongs", "grpflg": "Y" }, { "clsnam": "2467", "clsnbr": "0902050304", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "TI - Toothed Internal \u0022Push on\u0022 Ring", "catnm5": "TI-ZF - Internal \u0022Push on\u0022 Ring ~ Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog_TI_300X300.jpg|DMR_TI-Dim_800x181.jpg", "notes": "\u003Cp\u003EThe internal version of the TY featuring a series of prongs protruding outward. The ends create interference with the housing when the ring is installed and a load introduced to the other side.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .311 - 2.002 inches", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Inside Diameter - I.D. (in)|Ring Thickness - T (in)|No. Of Prongs", "grpflg": "Y" }, { "clsnam": "2466", "clsnbr": "0902050305", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "TI - Toothed Internal \u0022Push on\u0022 Ring", "catnm5": "TI-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog_TI_300X300.jpg|DMR_TI-Dim_800x181.jpg", "notes": "\u003Cp\u003EThe internal version of the TY featuring a series of prongs protruding outward. The ends create interference with the housing when the ring is installed and a load introduced to the other side.\u003C/p\u003E¶ \u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .311 - 2.002 inches", "grpatr": "Housing Diameter - Dh (in)|Housing Diameter - Dh (mm)|Inside Diameter - I.D. (in)|Ring Thickness - T (in)|No. Of Prongs", "grpflg": "Y" }, { "clsnam": "2427", "clsnbr": "09020504", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "TX - Toothed External \u0022Push on\u0022 Ring (Curved Rim)", "catnm5": "", "imgnme": "Daemar-DMR-Retaining-Ring-TX-Series-300x300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2460", "clsnbr": "0902050401", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "TX - Toothed External \u0022Push on\u0022 Ring (Curved Rim)", "catnm5": "TX-H - External \u0022Push on\u0022 Stainless Steel", "imgnme": "Daemar-DMR-Retaining-Ring-TX-Series-300x300.jpg|DMR_TX-Dim_800x181.jpg", "notes": "\u003Cp\u003EThis ring features an outer rim with a series of prongs protruding into the centre. The ends create interference with the shafts when the ring is installed and a load introduced to the other side. The outer rim of the TX is curved. The curved rim of the TX affords greater thrust load capacity than the TY and is easier to orient for assembly.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish/Code: Stainless Steel \u003C/p\u003E¶PH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .091 in - 1.005 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|O.D. (in)|No. Of Prongs|Ring Height - H (in)", "grpflg": "Y" }, { "clsnam": "1172", "clsnbr": "0902050402", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "TX - Toothed External \u0022Push on\u0022 Ring (Curved Rim)", "catnm5": "TX-PA - Carbon Steel Phosphate Coating", "imgnme": "Daemar-DMR-Retaining-Ring-TX-Series-300x300.jpg|DMR_TX-Dim_800x181.jpg", "notes": "\u003Cp\u003EThis ring features an outer rim with a series of prongs protruding into the centre. The ends create interference with the shafts when the ring is installed and a load introduced to the other side. The outer rim of the TX is curved. The curved rim of the TX affords greater thrust load capacity than the TY and is easier to orient for assembly.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Phosphate \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .091 in - 1.005 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|O.D. (in)|No. Of Prongs|Ring Height - H (in)", "grpflg": "Y" }, { "clsnam": "2463", "clsnbr": "0902050403", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "TX - Toothed External \u0022Push on\u0022 Ring (Curved Rim)", "catnm5": "TX-ZD - External \u0022Push on\u0022 Zinc Dichromate", "imgnme": "Daemar-DMR-Retaining-Ring-TX-Series-300x300.jpg|DMR_TX-Dim_800x181.jpg", "notes": "\u003Cp\u003EThis ring features an outer rim with a series of prongs protruding into the centre. The ends create interference with the shafts when the ring is installed and a load introduced to the other side. The outer rim of the TX is curved. The curved rim of the TX affords greater thrust load capacity than the TY and is easier to orient for assembly.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .091 in - 1.005 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|O.D. (in)|No. Of Prongs|Ring Height - H (in)", "grpflg": "Y" }, { "clsnam": "2471", "clsnbr": "0902050404", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "TX - Toothed External \u0022Push on\u0022 Ring (Curved Rim)", "catnm5": "TX-ZF - External \u0022Push on\u0022 Zinc Bright", "imgnme": "Daemar-DMR-Retaining-Ring-TX-Series-300x300.jpg|DMR_TX-Dim_800x181.jpg", "notes": "\u003Cp\u003EThis ring features an outer rim with a series of prongs protruding into the centre. The ends create interference with the shafts when the ring is installed and a load introduced to the other side. The outer rim of the TX is curved. The curved rim of the TX affords greater thrust load capacity than the TY and is easier to orient for assembly.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. \u003C/p\u003E¶\u003Cb\u003ESize Range:\u003C/b\u003E .091 in - 1.005 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|O.D. (in)|No. Of Prongs|Ring Height - H (in)", "grpflg": "Y" }, { "clsnam": "2470", "clsnbr": "0902050405", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "TX - Toothed External \u0022Push on\u0022 Ring (Curved Rim)", "catnm5": "TX-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "Daemar-DMR-Retaining-Ring-TX-Series-300x300.jpg|DMR_TX-Dim_800x181.jpg", "notes": "\u003Cp\u003EThis ring features an outer rim with a series of prongs protruding into the centre. The ends create interference with the shafts when the ring is installed and a load introduced to the other side. The outer rim of the TX is curved. The curved rim of the TX affords greater thrust load capacity than the TY and is easier to orient for assembly.\u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black; line-height: 115%; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-bidi-font-family: \u0027Times New Roman\u0027; mso-bidi-theme-font: minor-bidi; mso-fareast-language: EN-US; mso-ansi-language: EN-CA; mso-bidi-language: AR-SA;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003C/span\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .091 in - 1.005 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|O.D. (in)|No. Of Prongs|Ring Height - H (in)", "grpflg": "Y" }, { "clsnam": "2428", "clsnbr": "09020505", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "TY - Toothed External \u0022Push on\u0022 Ring (Flat Rim)", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog_TY_300X300.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2459", "clsnbr": "0902050501", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "TY - Toothed External \u0022Push on\u0022 Ring (Flat Rim)", "catnm5": "TY-H - Stainless Steel", "imgnme": "DMR_RetainingRingStyles_for_Catalog_TY_300X300.jpg|DMR_TY-Dim_800x181.jpg", "notes": "\u003Cp\u003EThis ring features an outer rim with a series of prongs protruding into the centre. The ends create interference with the shafts when the ring is installed and a load introduced to the other side. The outer rim of the TY is flat.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish/Code: Stainless Steel \u003C/p\u003E¶PH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900\u0026ordm; F.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .093 in - 1.002 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|O.D. (in)|No. Of Prongs|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1173", "clsnbr": "0902050502", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "TY - Toothed External \u0022Push on\u0022 Ring (Flat Rim)", "catnm5": "TY-PA - Carbon Steel Phosphate Coating", "imgnme": "DMR_RetainingRingStyles_for_Catalog_TY_300X300.jpg|DMR_TY-Dim_800x181.jpg", "notes": "\u003Cp\u003EThis ring features an outer rim with a series of prongs protruding into the centre. The ends create interference with the shafts when the ring is installed and a load introduced to the other side. The outer rim of the TY is flat.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Phosphate \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .093 in - 1.002 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|O.D. (in)|No. Of Prongs|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2464", "clsnbr": "0902050503", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "TY - Toothed External \u0022Push on\u0022 Ring (Flat Rim)", "catnm5": "TY-ZD - Zinc Dichromate", "imgnme": "DMR_RetainingRingStyles_for_Catalog_TY_300X300.jpg|DMR_TY-Dim_800x181.jpg", "notes": "\u003Cp\u003EThis ring features an outer rim with a series of prongs protruding into the centre. The ends create interference with the shafts when the ring is installed and a load introduced to the other side. The outer rim of the TY is flat.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: ZD Zinc Dichromate \u003C/p\u003E¶\u003Cp\u003EMaterial Code: Carbon Steel \u003C/p\u003E¶\u003Cp\u003ECarbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.\u003Cbr /\u003E\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .093 in - 1.002 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|O.D. (in)|No. Of Prongs|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2469", "clsnbr": "0902050504", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "TY - Toothed External \u0022Push on\u0022 Ring (Flat Rim)", "catnm5": "TY-ZF - Zinc Bright", "imgnme": "DMR_RetainingRingStyles_for_Catalog_TY_300X300.jpg|DMR_TY-Dim_800x181.jpg", "notes": "\u003Cp\u003EThis ring features an outer rim with a series of prongs protruding into the centre. The ends create interference with the shafts when the ring is installed and a load introduced to the other side. The outer rim of the TY is flat.\u003C/p\u003E¶\u003Cp\u003EMaterial Finish: Zinc Bright \u003C/p\u003E¶\u003Cp\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003C/p\u003E¶\u003Cp\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting.\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .093 in - 1.002 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|O.D. (in)|No. Of Prongs|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "2468", "clsnbr": "0902050505", "catnm1": "Retaining Rings", "catnm2": "Rotor Clip® Retaining Rings", "catnm3": "Self-Locking Rings", "catnm4": "TY - Toothed External \u0022Push on\u0022 Ring (Flat Rim)", "catnm5": "TY-Z3X - Trivalent Chromate Zinc Plus Sealer", "imgnme": "DMR_RetainingRingStyles_for_Catalog_TY_300X300.jpg|DMR_TY-Dim_800x181.jpg", "notes": "\u003Cp\u003EThis ring features an outer rim with a series of prongs protruding into the centre. The ends create interference with the shafts when the ring is installed and a load introduced to the other side. The outer rim of the TY is flat.\u003C/p\u003E¶\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Finish: Z3X Trivalent Chromate Zinc Plus Sealer\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EMaterial Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022font-size: 7.5pt; font-family: \u0027Verdana\u0027, \u0027sans-serif\u0027; color: black;\u0022\u003EThis standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS \u0026 ELV compliant.\u003Co:p\u003E\u003C/o:p\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cbr /\u003E\u003Cb\u003ESize Range:\u003C/b\u003E .093 in - 1.002 in", "grpatr": "Shaft Diameter - Ds (in)|Shaft Diameter - Ds (mm)|O.D. (in)|No. Of Prongs|Ring Thickness - T (in)", "grpflg": "Y" }, { "clsnam": "1199", "clsnbr": "0903", "catnm1": "Retaining Rings", "catnm2": "Spirolox® Retaining Rings", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_RetainingRingStyles_for_Catalog-Multiturn-300x300.jpg", "notes": "Spiral Wound Retaining Rings\u003Cul\u003E\u003Cli\u003EInternal and External\u003C/li\u003E\u003Cli\u003ELight, Medium and Heavy Duty\u003C/li\u003E\u003Cli\u003EInch \u0026 Metric Size Retaining Rings\u003C/li\u003E\u003C/ul\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1203", "clsnbr": "090301", "catnm1": "Retaining Rings", "catnm2": "Spirolox® Retaining Rings", "catnm3": "Heavy Duty Retaining Rings (RRN \u0026 RSN Series)", "catnm4": "", "catnm5": "", "imgnme": "DMR_SpiralRingStyles_Spirolox_RR_Internal-300x300.jpg", "notes": "Sizes range to fit 1/2\u0022 through 15\u0022 shaft and bore diameters and fit NAS 669-670 deep grooves with minimum deflection and greatest thrust capacity. RRN (internal) and RSN (external) rings require no special tools for removal. This series is covered by Aerospace standard AS3215 and AS3216 and will comply when specified on purchase order or drawing.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1210", "clsnbr": "09030101", "catnm1": "Retaining Rings", "catnm2": "Spirolox® Retaining Rings", "catnm3": "Heavy Duty Retaining Rings (RRN \u0026 RSN Series)", "catnm4": "RRN - Internal Retaining Rings", "catnm5": "", "imgnme": "DMR_SpiralRingStyles_Spirolox_RR_Internal-300x300.jpg|DMR_RRN-Image-01.jpg", "notes": "The RRN Series fits NAS 669-670 deep grooves with minimum deflection and greatest thrust capacity. The rings require no special tools for removal. This series is covered by Aerospace standard AS3215 \u0026 AS4299 and will comply when specified on purchase order or drawing.¶¶ \u003Cb\u003E Size Range:\u003C/b\u003E .500 in - 15.0 in", "grpatr": "Housing Diameter - A (in)|Ring Radial Wall - E (in)|Ring Free Diameter - G (in)|Ring Thickness - F (in)", "grpflg": "Y" }, { "clsnam": "1214", "clsnbr": "09030102", "catnm1": "Retaining Rings", "catnm2": "Spirolox® Retaining Rings", "catnm3": "Heavy Duty Retaining Rings (RRN \u0026 RSN Series)", "catnm4": "RSN - External Retaining Rings", "catnm5": "", "imgnme": "DMR_SpiralRingStyles_for_Catalog_RS_External-300x300.jpg|DMR_RSN-Image-01.jpg", "notes": "The RSN Series fits NAS 669-670 deep grooves with minimum deflection and greatest thrust capacity. The rings require no special tools for removal. This series is covered by Aerospace standard AS3216 \u0026 AS4299 and will comply when specified on purchase order or drawing.¶¶ \u003Cb\u003E Size Range:\u003C/b\u003E .500 in - 15.0 in", "grpatr": "Shaft Diameter-A (in)|Ring Radial Wall - E (in)|Ring Free Diameter - G (in)|Ring Thickness - F (in)", "grpflg": "Y" }, { "clsnam": "1200", "clsnbr": "090302", "catnm1": "Retaining Rings", "catnm2": "Spirolox® Retaining Rings", "catnm3": "Light Duty Retaining Rings (UR \u0026 US Series)", "catnm4": "", "catnm5": "", "imgnme": "DMR_SpiralRingStyles_for_Catalog_UR_Internal-300x300.jpg", "notes": "UR - US Series - For economy in light duty applications. Rings are single turn for shaft ore bore diameters from 1/2\u0022 through 10\u0022. A radius removal notch is on one end. The other end is square cut. Rings are axially assembled.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1215", "clsnbr": "09030201", "catnm1": "Retaining Rings", "catnm2": "Spirolox® Retaining Rings", "catnm3": "Light Duty Retaining Rings (UR \u0026 US Series)", "catnm4": "UR - Internal, Single Turn Retaining Rings", "catnm5": "", "imgnme": "DMR_SpiralRingStyles_for_Catalog_UR_Internal-300x300.jpg|DMR_UR-Image-01.jpg", "notes": "The UR Series is intended for light duty applications. Retaining Rings are single turn for shaft ore bore diameters from 1/2\u0022 through 10\u0022. A radius removal notch is on one end. The other end is square cut. Rings are axially assembled.¶¶ \u003Cb\u003E Size Range:\u003C/b\u003E .500 in - 10.0 in", "grpatr": "Housing Diameter - A (in)|Ring Radial Wall - E (in)|Ring Free Diameter - G (in)|Ring Thickness - F (in)", "grpflg": "Y" }, { "clsnam": "1216", "clsnbr": "09030202", "catnm1": "Retaining Rings", "catnm2": "Spirolox® Retaining Rings", "catnm3": "Light Duty Retaining Rings (UR \u0026 US Series)", "catnm4": "US - External, Single Turn Retaining Rings", "catnm5": "", "imgnme": "DMR_SpiralRingStyles_for_Catalog_US_External-300x300.jpg|DMR_US-Image-01.jpg", "notes": "The US Series is intended for light duty applications. Retaining Rings are single turn for shaft ore bore diameters from 1/2\u0022 through 10\u0022. A radius removal notch is on one end. The other end is square cut. Rings are axially assembled. ¶¶ \u003Cb\u003E Size Range:\u003C/b\u003E .500 in - 10.0 in", "grpatr": "Shaft Diameter-A (in)|Ring Radial Wall - E (in)|Ring Free Diameter - G (in)|Ring Thickness - F (in)", "grpflg": "Y" }, { "clsnam": "1201", "clsnbr": "090303", "catnm1": "Retaining Rings", "catnm2": "Spirolox® Retaining Rings", "catnm3": "Medium Duty Retaining Rings (RR \u0026 RS Series)", "catnm4": "", "catnm5": "", "imgnme": "DMR_SpiralRingStyles_Spirolox_RR_Internal-300x300.jpg", "notes": "RR - RS Series - This series offers economy in price, space requirements and weight in medium thrust applications. These rings are rated to handle approximately twice the thrust capacity of the light duty series and 2/3 the amount of thrust load of heavy duty rings. They range in size from 1/2\u0022 to 11\u0022 shaft and bore diameters.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1209", "clsnbr": "09030301", "catnm1": "Retaining Rings", "catnm2": "Spirolox® Retaining Rings", "catnm3": "Medium Duty Retaining Rings (RR \u0026 RS Series)", "catnm4": "RR - Internal Retaining Rings", "catnm5": "", "imgnme": "DMR_SpiralRingStyles_Spirolox_RR_Internal-300x300.jpg|DMR_RR-Image-01.jpg", "notes": "This series offers economy in price, space requirements and weight in medium thrust applications. The RR Series rings are covered by Mil Spec, Mil-R-27426 and Aerospace Standard AS3217 \u0026 AS4299. They will comply with these specs when specified on purchase order or drawing. ¶¶ \u003Cb\u003E Size Range:\u003C/b\u003E .500 in - 11.0 in", "grpatr": "Housing Diameter - A (in)|Ring Radial Wall - E (in)|Ring Free Diameter - G (in)|Ring Thickness - F (in)", "grpflg": "Y" }, { "clsnam": "1213", "clsnbr": "09030302", "catnm1": "Retaining Rings", "catnm2": "Spirolox® Retaining Rings", "catnm3": "Medium Duty Retaining Rings (RR \u0026 RS Series)", "catnm4": "RS - External Retaining Rings", "catnm5": "", "imgnme": "DMR_SpiralRingStyles_for_Catalog_RS_External-300x300.jpg|DMR_RS-Image-01.jpg", "notes": "This series offers economy in price, space requirements and weight in medium thrust applications. The RS Series rings are covered by Mil Spec, Mil-R-27426 and Aerospace Standard AS3218 \u0026 AS4299. They will comply with these specs when specified on purchase order or drawing. ¶¶ \u003Cb\u003E Size Range:\u003C/b\u003E .500 in - 11.0 in", "grpatr": "Shaft Diameter-A (in)|Ring Radial Wall - E (in)|Ring Free Diameter - G (in)|Ring Thickness - F (in)", "grpflg": "Y" }, { "clsnam": "1202", "clsnbr": "090304", "catnm1": "Retaining Rings", "catnm2": "Spirolox® Retaining Rings", "catnm3": "Medium Heavy Duty Retaining Rings (RRT \u0026 RST)", "catnm4": "", "catnm5": "", "imgnme": "DMR_SpiralRingStyles_Spirolox_RR_Internal-300x300.jpg", "notes": "For maximum ease of assembly with maximum thrust capacity. This series was originally designed to fit NAS 50-51 Grooves. RRT (internal) and RST (external) thrust capacity is just below that of the Heavy Duty rings. Sizes range to fit 1/2\u0022 to 10\u0022 shaft and bore diameters (Sizes above 6\u0022 are 3-turn to facilitate assembly and removal).", "grpatr": "", "grpflg": "N" }, { "clsnam": "1211", "clsnbr": "09030401", "catnm1": "Retaining Rings", "catnm2": "Spirolox® Retaining Rings", "catnm3": "Medium Heavy Duty Retaining Rings (RRT \u0026 RST)", "catnm4": "RRT - Internal Retaining Rings", "catnm5": "", "imgnme": "DMR_SpiralRingStyles_Spirolox_RR_Internal-300x300.jpg|DMR_RRT-Image-01.jpg", "notes": "The RRT Series thrust capacity is just below that of the Heavy Duty rings. Retaining ring sizes range to fit 1/2\u0022 to 10\u0022 shaft and bore diameters (Sizes above 6\u0022 are 3-turn to facilitate assembly and removal).¶¶ \u003Cb\u003E Size Range:\u003C/b\u003E .500 in - 10.0 in", "grpatr": "Housing Diameter - A (in)|Ring Radial Wall - E (in)|Ring Free Diameter - G (in)|Ring Thickness - F (in)", "grpflg": "Y" }, { "clsnam": "1217", "clsnbr": "09030402", "catnm1": "Retaining Rings", "catnm2": "Spirolox® Retaining Rings", "catnm3": "Medium Heavy Duty Retaining Rings (RRT \u0026 RST)", "catnm4": "RST - External Retaining Rings", "catnm5": "", "imgnme": "DMR_SpiralRingStyles_for_Catalog_RS_External-300x300.jpg|DMR_RST-Image-01.jpg", "notes": "The RST Series thrust capacity is just below that of the Heavy Duty rings. Retaining ring sizes range to fit 1/2\u0022 to 10\u0022 shaft and bore diameters (Sizes above 6\u0022 are 3-turn to facilitate assembly and removal).¶¶ \u003Cb\u003E Size Range:\u003C/b\u003E .500 in - 10.0 in", "grpatr": "Shaft Diameter-A (in)|Ring Radial Wall - E (in)|Ring Free Diameter - G (in)|Ring Thickness - F (in)", "grpflg": "Y" }, { "clsnam": "1832", "clsnbr": "10", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_DiscSpring-WaveSpring_Group-01_500x500.jpg", "notes": "Daemar\u0027s line up of Engineered Fasteners and Springs provides non-threaded fastener solutions for a wide range of applications. Products include: self compensating hose, constant section retaining rings, push-on fasteners, plastic fasteners, disc springs, wave springs, kits and installation tools.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1833", "clsnbr": "1001", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Disc Springs", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_DiscSpring_Stack-Single_500x500.jpg|DiscSpring_SectionDrawing_500wd.jpg", "notes": "The complete range of standard Disc Springs ¶\u003Cul\u003E¶\u003Cli\u003EDIN 2093 Metric Series\u003C/li\u003E ¶\u003Cli\u003EDIN 6796 Series - Belleville Washers\u003C/li\u003E¶\u003C/ul\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1995", "clsnbr": "100101", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Disc Springs", "catnm3": "Belleville Springs-Refining \u0026 Chemical Flange Bolt", "catnm4": "", "catnm5": "", "imgnme": "DMR_DiscSpring_Single-A_500x500.jpg|DiscSpring_SectionDrawing_500wd.jpg", "notes": "DMR Belleville springs are designed to produce high loads when deflected to their flat position. The deflection of DMR Belleville springs significantly reduces the spring rate of the bolted system, reducing the change in preload of the bolt, thus avoiding leakage through the joint. Recommended for live loading of flange joints \u0026 valve steam packing gland applications.", "grpatr": "", "grpflg": "N" }, { "clsnam": "2006", "clsnbr": "10010101", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Disc Springs", "catnm3": "Belleville Springs-Refining \u0026 Chemical Flange Bolt", "catnm4": "Belleville Springs 17-7 ph 500 (f)", "catnm5": "", "imgnme": "DMR_DiscSpring_Single-A_500x500.jpg|DiscSpring_SectionDrawing_500wd.jpg", "notes": "\u003CP\u003EBelleville Springs 17-7 ph 500 (f)\u003C/P\u003E\u003CP\u003EBolts: B-7/ B-16 \u003C/P\u003E\u003CP\u003EMaterial : 17-7 ph \u003C/P\u003E\u003CP\u003EWorking temperatures To 500 (f) \u003C/P\u003E\u003CP\u003E17-7 Steel is subject to spontaneous fracture when stress and exposed to some corrosive environments.\u003C/P\u003E", "grpatr": "Bolt Size|OD (mm)|OD (in)|ID (mm)|ID (in)|tK (mm)|tK (in)|ho (mm)|ho (in)|lo (mm)|lo (in)", "grpflg": "Y" }, { "clsnam": "2003", "clsnbr": "10010102", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Disc Springs", "catnm3": "Belleville Springs-Refining \u0026 Chemical Flange Bolt", "catnm4": "Belleville Springs 30,000 LBS", "catnm5": "", "imgnme": "DMR_DiscSpring_Single-A_500x500.jpg|DiscSpring_SectionDrawing_500wd.jpg", "notes": "\u003CP\u003EBelleville Springs 30,000 LBS\u003C/P\u003E¶\u003CP\u003EBolts: B-7/ B-16 \u003C/P\u003E¶\u003CP\u003EBolt Stress: 30,000 lbs \u003C/P\u003E¶\u003CP\u003EMaterial : H11/H13\u003C/P\u003E¶\u003CP\u003EWorking temperatures To 1000 (f) Depending Upon Material Used \u003C/P\u003E¶\u003CP\u003EAll Springs can be manufactured with 17-7 ph \u0026 Inconel material. However for the same bolt size \u0026 torque value, only tK and ho will be different.\u003C/P\u003E", "grpatr": "Bolt Size (in)|Threaded Root Area|Bolt Tension Calculated Flat Load|OD (mm)|OD (in)|ID (mm)|ID (in)|tK (mm)|tK (in)|ho (mm)|ho (in)|Torque Ft. Lbs.", "grpflg": "Y" }, { "clsnam": "2004", "clsnbr": "10010103", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Disc Springs", "catnm3": "Belleville Springs-Refining \u0026 Chemical Flange Bolt", "catnm4": "Belleville Springs 45,000 LBS", "catnm5": "", "imgnme": "DMR_DiscSpring_Single-A_500x500.jpg|DiscSpring_SectionDrawing_500wd.jpg", "notes": "\u003CP\u003EBelleville Springs 45,000 LBS\u003C/P\u003E¶\u003CP\u003EBolts: B-7/ B-16 \u003C/P\u003E¶\u003CP\u003EBolt Stress: 45,000 lbs \u003C/P\u003E¶\u003CP\u003EMaterial : H11/H13\u003C/P\u003E¶\u003CP\u003EWorking temperatures To 1000 (f) Depending Upon Material Used \u003C/P\u003E¶\u003CP\u003EAll Springs can be manufactured with 17-7 ph \u0026 Inconel material. However for the same bolt size \u0026 torque value, only tK and ho will be different.\u003C/P\u003E", "grpatr": "Bolt Size (in)|Threaded Root Area|Bolt Tension Calculated Flat Load|OD (mm)|OD (in)|ID (mm)|ID (in)|tK (mm)|tK (in)|ho (mm)|ho (in)|Torque Ft. Lbs.", "grpflg": "Y" }, { "clsnam": "2005", "clsnbr": "10010104", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Disc Springs", "catnm3": "Belleville Springs-Refining \u0026 Chemical Flange Bolt", "catnm4": "Belleville Springs 60,000 LBS", "catnm5": "", "imgnme": "DMR_DiscSpring_Single-A_500x500.jpg|DiscSpring_SectionDrawing_500wd.jpg", "notes": "\u003CP\u003EBelleville Springs 60,000 LBS\u003C/P\u003E¶\u003CP\u003EBolts: B-7/ B-16 \u003C/P\u003E¶\u003CP\u003EBolt Stress: 60,000 lbs \u003C/P\u003E¶\u003CP\u003EMaterial : H11/H13\u003C/P\u003E¶\u003CP\u003EWorking temperatures To 1000 (f) Depending Upon Material Used \u003C/P\u003E¶\u003CP\u003EAll Springs can be manufactured with 17-7 ph \u0026 Inconel material. However for the same bolt size \u0026 torque value, only tK and ho will be different.\u003C/P\u003E¶\u003CP\u003EPlease note * items below have a 47,500 lbs bolt stress.\u003C/P\u003E", "grpatr": "Bolt Size (in)|Threaded Root Area|Bolt Tension Calculated Flat Load|OD (mm)|OD (in)|ID (mm)|ID (in)|tK (mm)|tK (in)|ho (mm)|ho (in)|Torque Ft. Lbs.", "grpflg": "Y" }, { "clsnam": "1843", "clsnbr": "100102", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Disc Springs", "catnm3": "DIN 2093 Metric Series", "catnm4": "", "catnm5": "", "imgnme": "DMR_DiscSpring_Single-A_500x500.jpg|DiscSpring_SectionDrawing_500wd.jpg", "notes": "Our Standard Product Range of DIN 2093 disc springs includes 246 sizes with outside diameters between 6 and 250 mm. These springs are manufactured from Ck 67 and 50 CrV 4, and are typically available from stock. The standard corrosion protection is zinc phosphating and oiling.", "grpatr": "Bolt Size (mm)|OD (mm)|ID (mm)|t (mm)|h (mm)", "grpflg": "Y" }, { "clsnam": "1841", "clsnbr": "100103", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Disc Springs", "catnm3": "DIN 6796 Series - Belleville Washers", "catnm4": "", "catnm5": "", "imgnme": "DMR_DiscSpring_Single-A_500x500.jpg|DiscSpring_SectionDrawing_500wd.jpg", "notes": "Heavy Duty Belleville Washers or Conical Washers are manufactured as per DIN 6796 in 50 CrV 4 and Ck 67. They are designed to preload bolts and are not intended for applications with dynamic loads.¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1844", "clsnbr": "10010301", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Disc Springs", "catnm3": "DIN 6796 Series - Belleville Washers", "catnm4": "DIN 6796 Series - Belleville Washers", "catnm5": "", "imgnme": "DMR_DiscSpring_Single-A_500x500.jpg|DiscSpring_SectionDrawing_500wd.jpg", "notes": "Heavy Duty Belleville Washers or Conical Washers are manufactured as per DIN 6796 in 50 CrV 4 and Ck 67. They are designed to preload bolts and are not intended for applications with dynamic loads.¶", "grpatr": "Bolt Size (mm)|Bolt Size (in)|OD (mm)|OD (in)|ID (mm)|ID (in)|t (mm)|t (in)|h (mm)|h (in)", "grpflg": "Y" }, { "clsnam": "1834", "clsnbr": "1002", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Wave Springs", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_WaveSpring-Group_500x500.jpg", "notes": "Wave springs are made from coiled flat wire with waves added to provide a spring effect. ¶\u003Cul\u003E¶\u003Cli\u003ESingle Turn Wave Springs\u003C/li\u003E ¶\u003Cli\u003EMultiturn Wave Springs\u003C/li\u003E¶\u003Cli\u003EShims\u003C/li\u003E¶\u003C/ul\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1870", "clsnbr": "100201", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Wave Springs", "catnm3": "Shim Rings", "catnm4": "", "catnm5": "", "imgnme": "DMR_KMS-Shim-Rings_500x500.jpg", "notes": "\u003CP\u003EKMS Shim Rings \u003C/P\u003E¶\u003CP\u003EShims rings are typically used in order to support , adjust for better fit, or provide a level surface. Shims may also be used as spacers to fill gaps between parts subject to wear \u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1877", "clsnbr": "10020101", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Wave Springs", "catnm3": "Shim Rings", "catnm4": "KMS Shim Rings", "catnm5": "", "imgnme": "DMR_KMS-Shim-Rings_500x500.jpg|DMR_KMS_Shims_measurments.jpg", "notes": "\u003CSPAN class=text1\u003EShims rings are typically used in order to support , adjust for better fit, or provide a level surface. Shims may also be used as spacers to fill gaps between parts subject to wear.\u003C/SPAN\u003E", "grpatr": "Free Diameter - Df (in)|Section - S (in)", "grpflg": "Y" }, { "clsnam": "1875", "clsnbr": "100202", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Wave Springs", "catnm3": "Wave Springs - Multi Turn - Metric", "catnm4": "", "catnm5": "", "imgnme": "DMR_WaveSpring-MultiTurn-FlatShim-Plain_500x500.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003EMWL,MWM,MWR Wave Springs \u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003EUsed for low force applications with large deflections: More turns equals less force. Utilizes nearly half the space as helical compression springs while producing the same force\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1876", "clsnbr": "10020201", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Wave Springs", "catnm3": "Wave Springs - Multi Turn - Metric", "catnm4": "MWL, MWM, MWR Wave Springs", "catnm5": "", "imgnme": "DMR_WaveSpring-MultiTurn-FlatShim-Plain_500x500.jpg|DMR_MWL_MWM_MWR_measurments.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003EMulti-Turn- Metric \u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003ELight (WSL) / Medium (WSM) / Heavy (WSR)\u003C/SPAN\u003E\u003C/P\u003E¶\u003CSPAN class=text1\u003E\u003CP\u003E\u003CSPAN class=text1\u003EUsed for low force applications with large deflections: More turns equals less force. Utilizes nearly half the space as helical compression springs while producing the same force. \u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003EMulti-Turn Plain End and Multi-Turn Flat Shim tops available\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003E*Not available with shim ends\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003EALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE SPECIFIED.\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003EPART NUMBERS SHOWN REFLECT MULTI-TURN WAVE SPRINGS WITH PLAIN ENDS.\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003ETHE LETTERS SHOWN AFTER THE PART NUMBERS REPRESENT THE NUMBER OF TURNS. WHEN ORDERING, PARTS SHOULD BE PRESENTED WITH THE PART NUMBER, FOLLOWED BY THE MATERIAL, AND THEN THE NUMBER OF TURNS (i.e. MWL-8ST A, MWM-10ST B, MWR-14ST C, ETC.)\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003EFOR FLAT SHIM TOP WAVE SPRINGS, ADD AN \u0027F\u0027 TO THE END OF THE PART NUMBER (i.e. MWL-8ST AF, MWM-10ST BF, MWR-14ST CF, ETC.)\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003EMATERIAL CODES: ST = CARBON STEEL. SQ = 17-7 PH/C STAINLESS STEEL. SPECIAL ALLOYS AVAILABLE UPON REQUEST.\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003E\u003C/SPAN\u003E \u003C/P\u003E\u003C/SPAN\u003E", "grpatr": "Housing Diameter - Dh (mm)[Housing Dia. (mm)]|Load - N (mm)[Load (N)]|Number of Waves (mm)[Number of Waves]|Number of Turns (mm)[Number of Turns]|Spring Rate Ref. N/mm (mm)[Spring Rate (N/mm)]", "grpflg": "Y" }, { "clsnam": "1869", "clsnbr": "100203", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Wave Springs", "catnm3": "Wave Springs- Multi Turn - Inch", "catnm4": "", "catnm5": "", "imgnme": "DMR_WaveSpring-MultiTurn-FlatShim-Plain_500x500.jpg", "notes": "\u003CP\u003EWSL, WSM WSR Wave Springs \u003C/P\u003E¶\u003CP\u003EUsed for low force applications with large deflections: More turns equals less force. Utilizes nearly half the space as helical compression springs while producing the same force. \u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1874", "clsnbr": "10020301", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Wave Springs", "catnm3": "Wave Springs- Multi Turn - Inch", "catnm4": "WSL , WSM, WSR Wave Springs", "catnm5": "", "imgnme": "DMR_WaveSpring-MultiTurn-FlatShim-Plain_500x500.jpg|DMR_MWL_MWM_MWR_measurments.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003EMulit Turn - Inch\u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003ELight (WSL) / Medium (WSM) / Heavy (WSR)\u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003EUsed for low force applications with large deflections: More turns equals less force. Utilizes nearly half the space as helical compression springs while producing the same force. \u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003EMulti-Turn Plain End and Multi-Turn Flat Shim tops available.\u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003EPART NUMBERS SHOWN REFLECT MULTI-TURN WAVE SPRINGS WITH PLAIN ENDS.\u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003ETHE LETTERS SHOWN AFTER THE PART NUMBERS REPRESENT THE NUMBER OF TURNS. WHEN ORDERING, PARTS SHOULD BE PRESENTED WITH THE PART NUMBER, FOLLOWED BY THE MATERIAL, AND THEN THE NUMBER OF TURNS (i.e. WSL-37ST A, WSM-50ST B, WSR-75ST C, ETC.)\u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003EFOR FLAT SHIM TOP WAVE SPRINGS, ADD AN \u0027F\u0027 TO THE END OF THE PART NUMBER (i.e. WSL-37ST AF, WSM-50ST BF, WSR-75ST CF, ETC.)\u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003EMATERIAL CODES: ST = CARBON STEEL. SQ = 17-7 PH/C STAINLESS STEEL. SPECIAL ALLOYS AVAILABLE UPON REQUEST.\u003C/SPAN\u003E\u003CBR\u003E\u003C/P\u003E", "grpatr": "Housing Diameter - Dh (mm)[Housing Dia. (Dh)]|Shaft Diameter Clearance- Ds (in)[Shaft Dia. (Ds)]|Free Height Ref. -FH (in)[Free Height (FH)]|Spring Rate Ref. Lbs./in. (in)[Spring Rate(lbs/in)]", "grpflg": "Y" }, { "clsnam": "1866", "clsnbr": "100204", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Wave Springs", "catnm3": "Wave Springs- Single Turn - Inch", "catnm4": "", "catnm5": "", "imgnme": "DMR_WaveSpring-SingleTurn-Styles-Vertical-300x550.jpg", "notes": "\u003CP\u003ESST Wave Springs \u003C/P\u003E¶\u003CP\u003EIdeal for short deflection applications with low to medium forces. Offered in a number of waves and material thickness. Designed for a wide range of bore and rod diameters. \u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1871", "clsnbr": "10020401", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Wave Springs", "catnm3": "Wave Springs- Single Turn - Inch", "catnm4": "SST Wave Springs", "catnm5": "", "imgnme": "DMR_WaveSpring-SingleTurn-Styles-Vertical-300x550.jpg|DMR_SST_measurments.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003ESingle Turn- Inch \u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003EIdeal for short deflection applications with low to medium forces. Offered in a number of waves and material thickness. Designed for a wide range of bore and rod diameters. \u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003EOverlap: Sizes -50 to -162 3 waves \u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003EGap: Sizes -175 \u0026 up * Multiple waves (see table) \u003C/SPAN\u003E\u003CBR\u003E\u003C/P\u003E", "grpatr": "Housing Diameter - Dh (in)[Housing Dia. (Dh)]|Shaft Diameter Clearance- Ds (in)[Shaft Dia. (Ds)]|Free Height Ref. -FH (in)[Free Height (FH)]|Spring Rate Ref. Lbs./in. (in)[Spring Rate(lbs/in)]", "grpflg": "Y" }, { "clsnam": "1868", "clsnbr": "100205", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Wave Springs", "catnm3": "Wave Springs- Single Turn -Metric", "catnm4": "", "catnm5": "", "imgnme": "DMR_WaveSpring-SingleTurn-Styles-Vertical-300x550.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003EMST Wave Springs \u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003EIdeal for short deflection applications with low to medium forces. Offered in a number of waves and material thickness. Designed for a wide range of bore and rod diameters.\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1873", "clsnbr": "10020501", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Wave Springs", "catnm3": "Wave Springs- Single Turn -Metric", "catnm4": "MST Wave Springs", "catnm5": "", "imgnme": "DMR_WaveSpring-SingleTurn-Styles-Vertical-300x550.jpg|DMR_SST_measurments.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003ESingle Turn - Metric \u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003EIdeal for short deflection applications with low to medium forces. Offered in a number of waves and material thickness. Designed for a wide range of bore and rod diameters.\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003EOverlap: Sizes -63 to -374 * Multiple Waves (see table) \u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003EGap : Size -394 \u0026 up * multiple Waves (see table) \u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=text1\u003E\u003CSPAN class=text1\u003EAll Dimensions in Millimeters unless otherwise stated.\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "Housing Diameter - Dh (mm)[Housing Dia. (Dh)]|Load - N (mm)[Load (N)]|Number of Waves (mm)[Number of Waves]|Spring Rate Ref. N/mm (mm)[Spring Rate (N/mm)]", "grpflg": "Y" }, { "clsnam": "1867", "clsnbr": "100206", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Wave Springs", "catnm3": "Wave Springs-Single Turn-Narrow-Inch", "catnm4": "", "catnm5": "", "imgnme": "DMR_WaveSpring-SingleTurnNarrow-300x300.jpg", "notes": "\u003CP\u003ENST Wave Springs \u003C/P\u003E¶\u003CP\u003EIdeal for short deflection applications where space is minimal.\u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1872", "clsnbr": "10020601", "catnm1": "Engineered Fasteners \u0026 Springs", "catnm2": "Wave Springs", "catnm3": "Wave Springs-Single Turn-Narrow-Inch", "catnm4": "NST Wave Springs", "catnm5": "", "imgnme": "DMR_WaveSpring-SingleTurnNarrow-300x300.jpg|DMR_NST_measurments.jpg", "notes": "\u003CP\u003E\u003CSPAN class=text1\u003ESingle Turn - Narrow - Inch \u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003EIdeal for short deflection applications where space is minimal.\u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003EGap Type * Mulitple Waves (see table) \u003C/SPAN\u003E\u003C/P\u003E\u003CP\u003E\u003CSPAN class=text1\u003E\u003C/SPAN\u003E\u003CBR\u003E \u003C/P\u003E", "grpatr": "Housing Diameter - Dh (in)[Housing Dia. (Dh)]|Shaft Diameter Clearance- Ds (in)[Shaft Dia. (Ds)]|Free Height Ref. -FH (in)[Free Height (FH)]|Spring Rate Ref. Lbs./in. (in)[Spring Rate(lbs/in]", "grpflg": "Y" }, { "clsnam": "1009", "clsnbr": "11", "catnm1": "Protective Closures", "catnm2": "", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "Daemar-Caplugs-group-367x367.jpg", "notes": "\u003CP\u003EA complete line of caps designed to protect virtually any product for virtually any application. We offer protective caps manufactured from plastic (low or high-density polyethylene), FlexTemp (for high heat resistance), silicone rubber, aluminum, paper, and vinyl. The vast selection includes threaded and tapered caps, flange covers, and static protective caps for product protection during shipping, packaging, or production processes. Oilfield Threaded protectors.\u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1239", "clsnbr": "1101", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "Daemar-Caplugs-group-367x367.jpg", "notes": "\u003CSPAN class=body\u003ESelect the Caplugs based on product type.\u003C/SPAN\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1245", "clsnbr": "110101", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "", "catnm5": "", "imgnme": "lg_caplugs_ezc-series_01.jpg", "notes": "\u003CSPAN class=body\u003EThreaded, and non-threaded caps - available in plastic, vinyl, and many other materials.\u003C/SPAN\u003E¶¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1278", "clsnbr": "11010101", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "", "imgnme": "lg_caplugs_ftc-series_01.jpg", "notes": "Non-Threaded (Tapered or Straight) - These caps are ideal for capping threaded and non-threaded parts as well as for providing masking protection. They\u0027re easy to slip on and off, while maintaining a secure fit for production protection.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1321", "clsnbr": "1101010101", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "EZC Series (Non-Threaded NPT Caps)", "imgnme": "DMR_EZCSeriesCaps_400x400.jpg|DMR_EZCSeriesCap_drawing_370x570.jpg", "notes": "Designed to cap NPT fittings, but can be used to protect a variety of items. A heavy-duty, tapered, multi-use cap with a flange for easy insertion and removal. ¶¶¶Material: Low-Density Polyethylene¶¶Colour: Orange¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1322", "clsnbr": "1101010102", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "FCO Series (Flat-Faced O-Ring Caps)", "imgnme": "DMR_FCOSeries_400x400.jpg|DMR_FCOSeries_drawing2_670x520.jpg", "notes": "Series FCO Flat Faced O-Ring Caps are designed to cap the outside of hexnuts. Featuring a chamfered flange for easy hand removal, these caps fit snugly to minimize the chance of falling off during transit. Available in two styles, Series FCO is ideal for fluid power valves and hose and pipe fittings.¶¶¶¶Material: Low-Density Polyethylene¶¶Colour*: Red¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1320", "clsnbr": "1101010103", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "FI Series - Diesel Fuel Injector Caps", "imgnme": "DMR_FISeries_DieselSeries_400x400.jpg|DMR_DieselCapSeries_drawing_370x570.jpg", "notes": "FI series caps protect diesel fuel injectors from impact damage, and keep out moisture and contaminants during shipping or storage. ¶\u003Cul\u003E¶\u003Cli\u003EEconomical Protection\u003C/li\u003E¶\u003Cli\u003EOne size fits all standard injectors\u003C/li\u003E ¶\u003C/ul\u003E¶Material: Low-Density Polyethylene¶¶Colour*: Blue¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1323", "clsnbr": "1101010104", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "FTC Series (for Flareless Tube and Nut Assembies)", "imgnme": "DMR_FTCSeries_400x400.jpg|DMR_FTCSeries_drawing_370x670.jpg", "notes": "Featuring a \u0022cap within a cap\u0022 design, Series FC Closures can be easily applied to flareless hydraulic tube and nut assemblies. As the FC Cap is pushed on the nut, the outer cap conforms to the hex shape of the nut while the inner cap covers the tube and sleeve inside the nut to hold the assembly firmly in place.¶¶¶Material: Low-Density Polyethylene¶¶Colour*: Red¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1324", "clsnbr": "1101010105", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "GC Series (Grease Caps)", "imgnme": "DMR_GCSeries_400x400.jpg|DMR_Caplugs_GC5_750x600.jpg|DMR_Caplugs_GC522_750x750.jpg|GC-Series_DimensionalDrawingss_800x600.jpg", "notes": "Series GC Grease Caps snap securely over fittings to seal out dirt and moisture. Integral retaining ring keeps cap in place during servicing. Color coding may be used to indicate type and/or frequency of lubrication. Caps also make good masks for spray painting. Available in two styles. ¶¶¶Material: Low-Density Polyethylene¶¶Colour*: Red, Blue, Yellow, Green, Black, White¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1325", "clsnbr": "1101010106", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "HC Series (Hose Caps)", "imgnme": "DMR_HCSeries_400x400.jpg|DMR_HCSeries_drawing_570x500.jpg", "notes": "Series HC Plastic Hose Caps are used to cover rigid tube and hose ends, as well as to prevent slippage over the fitting. The primary application for these caps is hose assembly manufacturing. ¶¶Material: FlexTemp (Thermoplastic Rubber)¶¶Colour*: Yellow¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2236", "clsnbr": "1101010107", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "HEX Series", "imgnme": "DMR_HEXSeries_400x400.jpg|DMR_HEXSeries_drawing_550x670.jpg", "notes": "\u003Cspan style=\u0022\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cspan style=\u0022\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EHEX series hexagonal caps are designed to protect hex style bolts or nuts from damage and contaminants.\u003Cbr /\u003E\u003Cspan style=\u0022\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EA dual bead feature allows parts to securely lock in place. \u003C/span\u003E\u003C/span\u003E\u003C/span\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EEasy to install\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ECommon sizes available\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cspan style=\u0022\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-tra", "grpatr": "Fits Hex size|Colour|A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1326", "clsnbr": "1101010108", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "J Series (Tear-Tab Caps for NPT Pipe Threads)", "imgnme": "DMR_JSeries_400x400.jpg|DMR_JSeries_drawing_500x670.jpg", "notes": "Time-saving Series J Caps slip easily over male NPT fittings and snap in place. Locking bead engages lead thread, holds cap on securely. Tear-tab breaks seal for easy removal. ¶¶¶Material: Low-Density Polyethylene¶¶Colour*: Blue¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1327", "clsnbr": "1101010109", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "JS Series (Tear-Tab Caps for Straight Threads)", "imgnme": "DMR_JSSeries_400x400.jpg|DMR_JSSeries_drawing_540x670.jpg", "notes": "Series JS Tear Caps for straight threads feature an extra-wide tab with gripping ribs on both top and bottom, making it easy to grab and tear off.¶¶¶¶Material: Low-Density Polyethylene¶¶Colour*: Natural¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1328", "clsnbr": "1101010110", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "MJ Series (Tear-Tab for Tapered Metric Threads)", "imgnme": "DMR_MJSeries_400x400.jpg|DMR_MJSeries_drawing_470x670.jpg", "notes": "Series MJ Tear-Tab Caps slip easily over metric threads and snap in place. Locking bead engages lead thread and holds cap on securely. Tear-tab breaks for easy removal. ¶¶¶Material: Low-Density Polyethylene¶¶Colour*: Red¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1329", "clsnbr": "1101010111", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "MJS Series (Tear-Tab Caps for MetricThreads)", "imgnme": "DMR_MJSSeries_400x400.jpg|DMR_MJSSeries_drawing_520x670.jpg", "notes": "Series MJS Tear-Caps for metric threads feature an extra-wide tab with gripping ribs on both top and bottom, making it easy to grab and tear off. The translucent gold color makes it possible to view an O-ring on the fitting. ¶¶¶¶Material: Low-Density Polyethylene¶¶Colour*: Gold¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1330", "clsnbr": "1101010112", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "OF Series (Caps for Long-Threaded Connectors)", "imgnme": "DMR_OFSeries_400x400.jpg|DMR_OFSeries_drawing_470x670.jpg", "notes": "Six internal ribs create a postiive grip on the outer surface of the fittings nut. Three internal webs act as a positive stop and positioning feature, preventing movment, which could lead to contamination and damage to the fitting during installation. ¶¶¶Material: Low-Density Polyethylene¶¶Colour: Orange¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1331", "clsnbr": "1101010113", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "PM Series (Push-on Metric Caps)", "imgnme": "DMR_PMSeries_400x400.jpg|DMR_PMSeries_drawing_370x670.jpg", "notes": "These easy-to-use push-on caps are designed to protect metric fittings. Intended to be reused, this durable cap has a flange for ease of installation and removal. While this cap was developed for metric fittings, its versatile design enables it to be used on a wide variety of threaded and non-threaded fittings. ¶¶Material: Low-Density Polyethylene¶¶Colour*: Yellow Tint (Natural shown is also available)¶¶", "grpatr": "A (in)|A (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1332", "clsnbr": "1101010114", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "PN Series (Push-on NPT Caps)", "imgnme": "DMR_PNSeries_400x400.jpg|DMR_PNSeries_drawing_420x670.jpg", "notes": "Engineered to protect NPT fittings, but versatile enough to be used on a variety of threaded and non-threaded fittings. Unlike tear-tab closures, these curable caps can be reused. A flanged top ensures quick and easy removal.¶¶Material: Low-Density Polyethylene¶¶Colour*: Red Tint (Natural also available)¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1333", "clsnbr": "1101010115", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "PO Series (Push-On Straight-Thread Caps)", "imgnme": "DMR_POSeries_400x400.jpg|DMR_POSeries_drawing_470x670.jpg", "notes": "Unlike tear-tab closures that can only be used once, the PO Series is designed to be reused. Specifically designed to protect straight threads with or without O-rings, this unique design is also ideal for use on a variety of thread forms and non-threaded fittings. ¶¶¶Material: Low-Density Polyethylene¶¶Colour: Natural¶¶", "grpatr": "A (in)|A (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1334", "clsnbr": "1101010116", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "PSC Series (Paper Caps for Flared Tube Fittings)", "imgnme": "DMR_PSCSeries_400x400.jpg|DMR_PSCSeries_drawing_520x620.jpg", "notes": "Manufactured from natural paper which is 100% recyclable, Paper Caplugs are the answer for applications requiring environmentally friendly components. The special paper used in the manufacture of Paper Caplugs is formulated from a blend of 90% virgin pulp and 10% post-consumer recycled paper. These closures will withstand temperatures up to 400 ºF (204 ºC), making them ideal for high-temperature application. ¶¶NOTE: Products are manufactured from paper which is hygroscopic. This means that there may be minor dimensional variation with changes in relative humidity. ¶¶¶Material: 90 lb. Paperboard¶¶Colour: Brown¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1335", "clsnbr": "1101010117", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "PTC Series (Tapered Paper Caps)", "imgnme": "DMR_PTCSeries_400x400.jpg|DMR_PTCSeries_drawing_520x570.jpg", "notes": "Manufactured from natural paper which is 100% recyclable, Paper Caplugs are the answer for applications requiring environmentally friendly components. The special paper used in the manufacture of Paper Caplugs is formulated from a blend of 90% virgin pulp and 10% post-consumer recycled paper. These closures will withstand temperatures up to 400 ºF (204 ºC), making them ideal for high-temperature application. ¶¶NOTE: Products are manufactured from paper which is hygroscopic. This means that there may be minor dimensional variation with changes in relative humidity. ¶¶¶Material: 90 lb. Paperboard¶¶Colour: Brown¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1336", "clsnbr": "1101010118", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "PZC Caps (Sleeve Caps for Tube Ends)", "imgnme": "DMR_PZCSeries_400x400.jpg|DMR_PZCSeriesCap_drawing_470x670.jpg", "notes": "Designed to protect unified threads, but can be used on both threaded and non-threaded fittings as well. The flanged top allows for quick and easy removal. This versatile design can be used as a cap or a plug. ¶¶Material: Low-Density Polyethylene¶¶Colour: Orange¶¶", "grpatr": "A (in)|A (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1337", "clsnbr": "1101010119", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "RC Caps (Caps for Threaded Connectors)", "imgnme": "DMR_RCSeries_400x400.jpg|DMR_RCSeries_drawing_370x670.jpg", "notes": "Originated for the automotive and air conditioning industries, Series RC Caps are suitable for a multitude of applications. They can be installed to fit threaded or smooth cylindrical surfaces. ¶¶Material: Low-Density Polyethylene¶¶Colour*: Red¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1338", "clsnbr": "1101010120", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "RCL Caps (Caps for Long-Threaded Connectors)", "imgnme": "DMR_RCLSeries_400x400.jpg|DMR_RCLSeries_drawing_370x670.jpg", "notes": "Series RCL Caps are ideal for protecting threaded or smooth cylindrical surfaces. Originally designed for use on hydraulic double threaded bulkhead fittings, they are especially suitable where greater longitudinal protection is required. ¶¶Material: Low-Density Polyethylene¶¶Colour*: Red¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1339", "clsnbr": "1101010121", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Non-Threaded", "catnm5": "SC Series (Sleeve Caps for Tube Ends)", "imgnme": "DMR_SCSeries_400x400.jpg|DMR_SCSeries_drawing_420x670.jpg", "notes": "Series SC Sleeve Caps are designed to fit outside diameters of tubing with a snug friction grip. Available in over 60 different ODs and lengths, the SC Series is ideal for capping and protecting both threaded and non-threaded tubing or rod ends. They also make excellent masks for painting, plating or grit-blasting operations. ¶¶Material: Low-Density Polyethylene¶¶Colour*: Red¶¶Applicable Specs: MIL-C-52078, MIL-C-5501/9, NAS-844¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1279", "clsnbr": "11010102", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Threaded", "catnm5": "", "imgnme": "lg_caplugs_asc-series_01.jpg", "notes": "Threaded - Plastic and metal screw-on caps provide protection for externally threaded parts, flared and flareless fittings, and tube ends.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1346", "clsnbr": "1101010201", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Threaded", "catnm5": "ASC Series (for Threaded Flared Fittings)", "imgnme": "DMR_ASCSeries_400x400.jpg|DMR_ASCSeries_drawing_370x570.jpg", "notes": "A standard aerospace and fluid power protective cap, the Series ASC has a nose section design that forms a low pressure seal on threaded, flared fittings. A more positive seal is possible with the addition of a sealing disc (Series ASC-DN). Stock sealing discs are neoprene; Butyl or Buna N rubber are also available. Contact factory for prices. ¶¶¶¶Material: 3003-0 ALuminum Alloy¶¶Colour: Natural (Silver)¶¶Applicable Specs: MIL-C-5501/3, NAS-817, NAS-835¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1347", "clsnbr": "1101010202", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Threaded", "catnm5": "CD Series (Threaded Caps for Flared JIC Fittings)", "imgnme": "DMR_CD_silo-large_1080x1080.jpg|DMR_CDSeries_drawing_370x670.jpg", "notes": "Knurled for ease of application, Series CD Caps seal flared JIC fittings exceptionally well against dirt and moisture, and are also used for masking during painting and plating. ¶¶¶¶Material: Low-Density Polyethylene¶¶Colour*: Red¶¶Applicable Specs: MIL-C-52078, MIL-C-5501/11, NAS-814, NAS-832¶", "grpatr": "C (in)|C (mm)|No. of THD|To Fit Nominal Tubing Size (in)|To Fit Thread Size (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2238", "clsnbr": "1101010203", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Threaded", "catnm5": "CD-M Series (Metric Fittings)", "imgnme": "DMR_CDMSeries_400x400.jpg|DMR_CDMSeries_drawing_550x670.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003ECD-M Series caps protect metric fittings exceptionally well against dirt, moisture and other contaminants. This series can also be used as a mask during dipping, painting and plating.\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003EIdeal for the automotive, hydraulics and electronics industries, the caps are designed using a rolled thread formation for fast production cycle times. The CD-M Series offers low-cost protection with customizable options. The caps can be ordered in high-density materials for further protection, and custom seals in Neoprene, Butyl or Buna Rubber are also available.\u003C/p\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ELow-Density Polyethylene\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EGreen\u003C/p\u003E", "grpatr": "To Cap Metric Thread Size|A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1348", "clsnbr": "1101010204", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Threaded", "catnm5": "DC Series (UN/UNS Caps)", "imgnme": "DMR_DCSeries_400x400.jpg|DMR_DCSeries_drawing_370x570.jpg", "notes": "This series, designed for use in aircraft and hydraulic equipment applications, seals out contaminants while protecting threads. The rolled threads allow the DC cap to be pushed on or threaded on. Threads meet UN and UNS specifications. ¶¶¶¶Material: High Density Polyethylene¶¶Colour: Blue¶¶Applicable Specs: MIL-8779-ANSI B1.1¶¶", "grpatr": "C (in)|C (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1280", "clsnbr": "11010103", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Vinyl", "catnm5": "", "imgnme": "lg_caplugs_vc-series_01.jpg", "notes": "Daemar offers a complete line of Caplug caps designed to protect virtually any product for virtually any application. These caps are manufactured from avariety of materials including low and high density polyethylene, silicone rubber, paper and vinyl (see vinyl section).", "grpatr": "", "grpflg": "N" }, { "clsnam": "1349", "clsnbr": "1101010301", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Vinyl", "catnm5": "AN Series (Vinyl Hex Caps)", "imgnme": "DMR_ANSeries_400x400.jpg|DMR_ANSeries_drawing_370x670.JPG", "notes": "Designed for AN style fittings, Series AN Caps are easy to install and remove. Engineered with aerospace quality, these caps are available in all common hydraulic nut sizes. No Tools are required to install Series AN Caps.¶¶¶¶Material: Vinyl¶¶Colour: Yellow¶¶Optional Colours*: White, Black, Brown, Orange, Red, Green, Gray, Blue¶¶", "grpatr": "A (in)|B (in)|C (in)|D (in)|E (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1350", "clsnbr": "1101010302", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Vinyl", "catnm5": "EZ Series (Flexible Vinyl Caps with Pull-Tab)", "imgnme": "DMR_EZSeries_400x400.jpg|DMR_EZSeries_drawing_370x670.JPG", "notes": "Series EZ-Pull SoftCaplugs feature an extra long tab centered at the top of the closure which allows the cap to be finger-removed easily, eliminating the use of tools which could damage threads or part surfaces. Molded from a specially formulated and flexible vinyl which enables a snug fit on parts, thereby providing better protection against dirt, moisture and impact damage.¶¶¶If your application is exposed to extreme heat, try our HEZ series. The HEZ series is manufactured in our Flex500 material that offers heat resistance up to and beyond 500F. Caplugs Flex500 material maintains the same flexible nature of standard vinyl, but offers the added heat resistance for finishing appications such as powder coating, e-coating, and more.¶¶¶Material: Vinyl¶¶Colours: Black and Red¶¶Optional Colours*: White, Brown, Orange, Green, Grey, Blue, Yellow¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1351", "clsnbr": "1101010303", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Vinyl", "catnm5": "MS Series (Vinyl Hex Caps)", "imgnme": "DMR_MSSeries_400x400.jpg|DMR_MSSeries_drawing_370x670.JPG", "notes": "Series MS Caps, used for MS style fittings, are easy to install and remove. Engineered with aerospace quality, these caps are available in all common hydraulic nut sizes. No tools are required to install Series MS Caps, which come in a high visibility yellow. ¶¶¶¶Material: Vinyl¶¶Colour: Yellow¶¶Optional Colours*: White, Black, Brown, Orange, Red, Green, Gray, Blue¶¶", "grpatr": "A (in)|B (in)|C (in)|D (in)|E (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1352", "clsnbr": "1101010304", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Vinyl", "catnm5": "TUV Series (Flexible Tear-Tab Caps)", "imgnme": "DMR_TUVSeries_400x400.jpg|DMR_TUVSeries_drawing_370x570.JPG", "notes": "These highly flexible caps allow for a snug fit on a range of differently sized and odd shaped fittings. Versatile enough to fit varying thread sizes. The flexibility the TUV series offers allows them to be pushed on, and the tear-tab design ensures ease of removal regardless of how tight fitting the cap is. The TUV series is heat resistant up to 350 degrees F, ideal for some finishing processes.¶¶¶¶Material: Vinyl¶¶Colour: Red¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1353", "clsnbr": "1101010305", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Vinyl", "catnm5": "VC Series (Round Vinyl Caps)", "imgnme": "DMR_VCSeries_400x400.jpg|DMR_VCSeries_drawing_370x670.jpg", "notes": "Series VC Soft Caplugs are extremely flexible and durable protective closures which are ideal for use as thread protectors, dust and moisture seals, pipe and stud end color coding, and for masking during painting or plating operations.¶¶If your application is exposed to extreme heat, try our HEZ series. The HEZ series is manufactured in our Flex500 material that offers heat resistance up to and beyond 500F. Caplugs Flex500 material maintains the same flexible nature of standard vinyl, but offers the added heat resistance for finishing applications such as powder coating, e-coating, and more.¶¶¶¶Material: Vinyl¶¶Standard Colour: Black¶¶Optional Colours*: White, Brown, Orange, Green, Gray, Blue, Yellow, Red¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1354", "clsnbr": "1101010306", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Vinyl", "catnm5": "VCF Series (Vinyl Caps with Flanges)", "imgnme": "DMR_VCFSeries_400x400.jpg|DMR_VCFSeries_drawing [Converted]_470x670.jpg", "notes": "Series VCF Vinyl Caps with Flanges ensure simple, easy removal with a flange at the closed end that is small enough not to interfere, but large enough to grasp during removal. These caps are available in many of the Series VC sizes. ¶¶¶¶Material: Vinyl¶¶Standard Colour: Black¶¶Optional Colours*: White, Brown, Orange, Red, Green, Gray, Blue, Yellow¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1355", "clsnbr": "1101010307", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Vinyl", "catnm5": "VFC Series (Flexible Caps with Flat Pull-Tab)", "imgnme": "DMR_VFCSeries_400x400.jpg|DMR_VFCHFCSeries_drawing_370x670.jpg", "notes": "Series VFC Caps feature a long flat tab centered at the top of the closure which allows easy removal of the cap.¶¶If your application is exposed to extreme heat, try our HEZ series. The HEZ series is manufactured in our Flex500 material that offers heat resistance up to and beyond 500F. Caplugs Flex500 material maintains the same flexible nature of standard vinyl, but offers the added heat resistance for finishing appications such as powder coating, e-coating, and more. ¶¶¶¶Material: Vinyl¶¶Standard Colours: Black and Red¶¶Optional Colours*: White, Brown, Orange, Green, Gray, Blue, Yellow¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1356", "clsnbr": "1101010308", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Vinyl", "catnm5": "VFE Series (Vinyl Caps with Flat-Ergonomic Tab)", "imgnme": "DMR_VFESeries_400x400.jpg|DMR_VFESeries_drawing_470x670.jpg", "notes": "VFE Caps feature a long, flat ergonomic pull-tab, which allows for easy removal. The ergonomic design offers an easier gripping surface and requires less pull for removal. ¶¶¶¶Material: Vinyl¶¶Colour: Black and Red¶¶Optional Colours*: White, Brown, Orange, Green, Gray, Blue, Yellow¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1357", "clsnbr": "1101010309", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Vinyl", "catnm5": "VFT Series (Textured Vinyl Caps with Tab)", "imgnme": "DMR_VFTSeries_400x400.jpg|DMR_VFTSeries_drawing_470x670.jpg", "notes": "The ergonomically designed VFT caps feature a long flat pull-tab for easy removal. To offer an even greater degree of control, we\u0027ve dipped our standard vinyl part in a second vinyl material that offers a textured finish. This second coat of vinyl grips to hands or gloves 80% better than traditional pull tabs. ¶¶¶¶Material: Vinyl¶¶Standard Colour: Red with black texture¶¶Optional Colours*: White, Brown, Orange, Gray, Blue, Yellow, Black with black texture. Textured second coat is only available in black.¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1358", "clsnbr": "1101010310", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Vinyl", "catnm5": "VS Series (Vinyl Squeeze Pull Caps)", "imgnme": "DMR_VSSeries_400x400.jpg|DMR_VSSeries_drawing_470x670.jpg", "notes": "The VS series caps are used extensively in the aircraft industry. Designed specifically to protect UNJF threads. Squeezing the uinquely engineered pull-tab opens the bottom of the cap slightly, thereby making the removal process much easier.¶¶¶¶Material: Vinyl¶¶Colour: Green¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1360", "clsnbr": "1101010311", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Vinyl", "catnm5": "VTC Series (Vinyl Thethered Caps)", "imgnme": "DMR_VTCSeries_400x400.jpg|DMR_VTCSeries_drawing_470x670.jpg", "notes": "Vinyl tethered caps are ideal for applicaitons that need removable and reusable protection. The soft vinyl keeps fittings protected from impact damage, contamination, dirt, and moisture. For your convenience, we\u0027ve designed these caps with a tether to allow them to be hung on an application when not in use. You won\u0027t lose any more caps and they\u0027ll always be right where you need them. The VTC series is available in a wide variety of colors for coding purposes. ¶¶¶¶Material: Vinyl¶¶Standard Colour: Black¶¶Optional Colours*: White, Red, Brown, Orange, Yellow, Green, Gray, Blue¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1361", "clsnbr": "1101010312", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Vinyl", "catnm5": "VVC Series (Vinyl Vented Caps)", "imgnme": "DMR_VVCSeries_400x400.jpg|DMR_VVCSeries_drawing20_370x670.jpg", "notes": "The Vent-A-Cap Series consists of several styles of caps used to protect the ends of tubing connectors and instrument tips. Vented for air release and easy removal, these products are commonly used in the medical industry. The venting also allows for air flow during ETO gas sterilization and assures that the cap won\u0027t pop off in extreme heat during masking. Series 20, Series 22 and Series 26 are tapered to fit multiple sizes for a variety of tubing and instruments. Series 29 is offered in a straight style. ¶¶¶¶Material: Vinyl¶¶Standard Colour: Black¶¶Optional Colours*: White, Brown, Orange, Green, Grey, Blue, Yellow, Red¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2240", "clsnbr": "1101010313", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Caps", "catnm4": "Caps-Vinyl", "catnm5": "WCC Series", "imgnme": "WCC-silo.jpg|WCC app_group.jpg|WCC-Series for Catalog_drawing.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EThe WCC vinyl corner covers are a simple, yet effective, design for basic corner edge protection. These protective corners reduce damage during shipping or storage of plate glass, mirrors, sheet metal and other materials. Available in 5 sizes.\u003C/p\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EEasy to install - soft vinyl allows the parts to slide on\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EColor coding allows for easy size recognition\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ECovers the full corner edge to reduce risk of damage\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EWall thickness of .060\u0022\u0022 for all sizes\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003ENeed a thicker solution? No problem - contact Customer Service at 1.888.CAPLUGS to receive a quote.\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EMaterial:\u003C/strong\u003E\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003EVinyl\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003E", "grpatr": "Fits Plate Thickness|Colour|A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1252", "clsnbr": "110102", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Compressed Gas", "catnm4": "", "catnm5": "", "imgnme": "lg_caplugs_svs-series_01.jpg", "notes": "\u003CSPAN class=body\u003EA full line of products to protect CGA valves and compressed gas cylinders. Used in a wide range of specialty, medical and industrial applications, this line includes protective netting for cylinders, caps for valves with external threads, plugs for valves with internal threads, protective valve sleeves and reusable tethered vinyl caps.\u003C/SPAN\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1647", "clsnbr": "11010201", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Compressed Gas", "catnm4": "Tank Protection", "catnm5": "", "imgnme": "lg_caplugs_csw-series_01.jpg", "notes": "Daemar offers a full line of products to protect CGA valves and compressed gas cylinders. Used in a wide range of specialty, medical and industrial applications, this line includes protective netting for cylinders, caps for valves with external threads, plugs for valves with internal threads, protective valve sleeves and reusable tethered vinyl caps.¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1729", "clsnbr": "1101020101", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Compressed Gas", "catnm4": "Tank Protection", "catnm5": "CSW Series Medical", "imgnme": "DMR_CSWSeries_400x400.jpg|DMR_CSWSeries_app_400x400.jpg", "notes": "CSW Series Sleeve-Web conforms snugly around oxygen, acetylene and propane tanks, providing protection against unsightly scratches, minimizing rust build-up, and increasing time between repainting tanks. It also protects DOT-mandated precautionary labels on gas cylinders from damage or accidental removal during handling.¶¶Material: Low-Density Polyethylene¶Colour: Natural (Clear) (CSW-4281-25 Blue)¶", "grpatr": "Fits Cylinder Diameter (in)|Fits Cylinder Diameter (mm)|Length (in)|Length (mm)|Package- Carton Quantity[Carton]|Package- Mini Quantity[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2356", "clsnbr": "1101020102", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Compressed Gas", "catnm4": "Tank Protection", "catnm5": "MOC-01", "imgnme": "DMR_MOC-01Series_400x400.jpg|DMR_MOC-01_drawing_370x570.jpg", "notes": "OC Series Mobile Oxygen Caps provide valve protection, ensuring that the oxygen units arrive at the end-user with no damage, contamination or tampering. Specially designed to be used with the Walk 02 Bout, Grab\u0027n Go®, O2Go®, OxyTote® and other popular units.\u003Cbr/\u003E¶¶MOC-01 fits the small barbed port where oxygen tubing attaches. Exterior ribs aid in the removal process and a vent hole prevents gas build-up. \u003Cbr/\u003E¶¶Colour: Black", "grpatr": "Colour|A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2357", "clsnbr": "1101020103", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Compressed Gas", "catnm4": "Tank Protection", "catnm5": "MOC-02", "imgnme": "DMR_MOC-02Series_400x400.jpg|DMR_MOC-02_drawing_370x570.jpg", "notes": "OC Series Mobile Oxygen Caps provide valve protection, ensuring that the oxygen units arrive at the end-user with no damage, contamination or tampering. Specially designed to be used with the Walk 02 Bout, Grab \u0027n Go®, O2Go®, OxyTote® and other popular units.\u003Cbr/\u003E¶¶MOC-02 is a small threaded style cap that fits DISS connections to protect against dirt and moisture. Six exterior ribs allow for easy installation and removal.\u003Cbr/\u003E ¶¶Colour: Green", "grpatr": "Colour|A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2358", "clsnbr": "1101020104", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Compressed Gas", "catnm4": "Tank Protection", "catnm5": "MOC-03", "imgnme": "DMR_MOC-03Series_400x400.jpg|DMR_MOC-03_drawing_420x570.jpg", "notes": "OC Series Mobile Oxygen Caps provide valve protection, ensuring that the oxygen units arrive at the end-user with no damage, contamination or tampering. Specially designed to be used with the Walk 02 Bout, Grab\u0027n Go®, O2Go®, OxyTote® and other popular units.\u003Cbr/\u003E¶¶MOC-03 fits a traditional, CGA-540 valve which can be used to fill the oxygen cylinder. Can also be used on non-oxygen related CGA-540 valves. Temper evident design with pull-tab. \u003Cbr/\u003E ¶¶Colour: Green", "grpatr": "Colour|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1646", "clsnbr": "11010202", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Compressed Gas", "catnm4": "Valve Protection and Tools", "catnm5": "", "imgnme": "lg_caplugs_svs-series_01.jpg", "notes": "Daemar offers a full line of products to protect CGA valves and compressed gas cylinders. Used in a wide range of specialty, medical and industrial applications, this line includes protective netting for cylinders, caps for valves with external threads, plugs for valves with internal threads, protective valve sleeves and reusable tethered vinyl caps.¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1724", "clsnbr": "1101020201", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Compressed Gas", "catnm4": "Valve Protection and Tools", "catnm5": "BC Series Medical", "imgnme": "DMR_BCSeries_400x400.jpg|DMR_BCSeries_drawing_470x670.jpg", "notes": "Use the bottle cap series to protect SCBA bottle valve threads during transit and storage. Designed for fire houses, these caps protect the valve threads from impact damage, contaminants and moisture. Designed with a large knurled head so firemen wearing gloves can easily grab to remove or apply.¶¶Material: Low-Density Polyethylene¶Colour: Orange¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2234", "clsnbr": "1101020202", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Compressed Gas", "catnm4": "Valve Protection and Tools", "catnm5": "PCAP Series", "imgnme": "DMR_PCAPSeries_400x400.jpg|DMR_PCAPSeries_drawing550x670.jpg", "notes": "PCAP Series propane caps are an economical way to protect the valves on propane tanks. These caps offer excellent protection against impact and contaminants during storage and transit. Tamper evident caps are equipped with a tear-tab to ensure the tank reaches its end-user in optimum condition.¶\u003Cul\u003E¶\u003Cli\u003EEasy removal by end-user\u003C/li\u003E¶\u003C/ul\u003E¶¶¶\u003Cstrong\u003EMaterial:\u003C/strong\u003ELow-density polyethylene \u003Cbr/\u003E¶¶\u003Cstrong\u003EStandard Colour:\u003C/strong\u003EBlue (2003-S is black)", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1725", "clsnbr": "1101020203", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Compressed Gas", "catnm4": "Valve Protection and Tools", "catnm5": "PVW Series Medical", "imgnme": "DMR_PVWSeries_400x400.jpg|DMR_PVWSeries_drawing_670x420.jpg", "notes": "The PVW oxygen wrench is designed to be compact and user-friendly. This patented design offers three different ports the user can choose from to provide the most comfortable fit. The design is versatile to accommodate both right- and left-handed individuals. These wrenches can be pad-printed with company information and are ideal for giveaways at trade shows or as a promotion with each tank filling.¶¶Material: ABS¶Colour: Natural, Flourescent Green, Dark Green¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1726", "clsnbr": "1101020204", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Compressed Gas", "catnm4": "Valve Protection and Tools", "catnm5": "SVS Series Medical", "imgnme": "DMR_SVSSeries_400x400.jpg|DMR_SVS1Series_drawing_670x470.jpg", "notes": "Protect the delicate valves of oxygen cylinders with our inexpensive plastic sleeves. Our sleeves slip easily over the valve and lock into place. Once the sleeve is applied it can only be removed by using the tear-tab. The tear-tab feature provides a tamper/use evident seal ensuring the tank delivered is full and free of contamination. Use our inexpensive sleeves to ensure the security of your tank and avoid costly liabilities. Our SVS1 part is designed for valves that don\u0027t include a washer.¶¶The SVS-2W does accommodate the washer. It slips easily over the cylinder and it\u0027s elasticity provides a snug fit ensuring it stays on the tank during transit. The netting buffers the tank and keeps it from being scratched and dented during shipment. ¶¶The SVS-500 is a smaller version than the SVS-1 and SVS-2W. It\u0027s offers the same lock-in feature and tamper evidence, but has a reduced size covering less of the valve.¶¶Material: Low-Density Polyethylene¶Colour: Green¶Standard Option Colour: White¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Part Length (in)|Part Length (mm)|Packaging - Carton[Carton]", "grpflg": "Y" }, { "clsnam": "1727", "clsnbr": "1101020205", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Compressed Gas", "catnm4": "Valve Protection and Tools", "catnm5": "TES Series Medical", "imgnme": "DMR_TESSeries_400x400.jpg|DMR_TESSeries_drawing_570x320.jpg", "notes": "Series TES Tamper-Evident Seals provide a positive, self-locking chain that breaks upon activating, thereby indicating that the seal, lock or device has been disturbed.¶¶Material: Polypropylene¶Colour: Black, Blue, Brown, Green, Orange, Pink, Purple, Red, White, Yellow¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]", "grpflg": "Y" }, { "clsnam": "1728", "clsnbr": "1101020206", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Compressed Gas", "catnm4": "Valve Protection and Tools", "catnm5": "UES Series", "imgnme": "DMR_UESSeries_400x400.jpg|DMR_UES-Series-drawing_670x370.jpg", "notes": "This patented design strap is for use on any compressed gas cylinder valve. The UES strap is designed to fit a full range of CGA listed valves. The versatile dual-locking system allows it to be used as a cap or plug and provides tamper evidence for both. The strap is molded in flexible and durable material making it ideal for use in all climates.¶¶Material: Thermoplastic Elastomer¶Standard Colour: Yellow¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "2216", "clsnbr": "110103", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Core Plugs", "catnm4": "", "catnm5": "", "imgnme": "Core_plugs_xlg_white.jpg", "notes": "The versatile PolyGuard® line of core plugs and basic accessories to protect the quality and integrity of your rolls and spools", "grpatr": "", "grpflg": "N" }, { "clsnam": "2217", "clsnbr": "11010301", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Core Plugs", "catnm4": "Anchor Plugs", "catnm5": "", "imgnme": "anchor-plug-app-main.jpg", "notes": "Anchor plugs provide a unique self-locking mechanism to permanently bond spool components", "grpatr": "", "grpflg": "N" }, { "clsnam": "2224", "clsnbr": "1101030101", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Core Plugs", "catnm4": "Anchor Plugs", "catnm5": "AP Anchor Plug Series", "imgnme": "anchor-plug-app-main.jpg", "notes": "Anchor plugs provide a unique self-locking mechanism to permanently bond spool components - they can not separate. This feature is a vital component for a reliable spool. Designed with inner ribs for added protection. Molded from high-impact HIPS resin for superior strength and durability. The deep anchor design allows the plug to lock permanently into the core. With Caplugs anchor plugs, no gluing or secondary operations are needed.", "grpatr": "Size|Description|Packaging - Carton Quantity|Standard Colour", "grpflg": "Y" }, { "clsnam": "2218", "clsnbr": "11010302", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Core Plugs", "catnm4": "Channels H and U", "catnm5": "", "imgnme": "COREPLUG_H-Channel_500x500.jpg", "notes": "H and U channel roll suspension components are made from high-quality aluminum.", "grpatr": "", "grpflg": "N" }, { "clsnam": "2225", "clsnbr": "1101030201", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Core Plugs", "catnm4": "Channels H and U", "catnm5": "CH Channel H and U Plugs", "imgnme": "COREPLUG_HandU-Channel_500x333.jpg|COREPLUG_H-Channel_500x500.jpg", "notes": "H and U channel roll suspension components are made from high-quality aluminum. These channels can be cut to meet the specific length you need. Available in a wide variety of widths.", "grpatr": "Size|Description|Packaging - Carton Quantity|Standard Colour", "grpflg": "Y" }, { "clsnam": "2219", "clsnbr": "11010303", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Core Plugs", "catnm4": "Core Plugs", "catnm5": "", "imgnme": "Core_plugs_xlg_white.jpg", "notes": "These versatile core plugs provide exceptional strength. Manufactured in super high-impact thermoplastic resin, these core plugs are designed with as many as 12 supporting ribs to provide added strength and protection of the roll.", "grpatr": "", "grpflg": "N" }, { "clsnam": "2226", "clsnbr": "1101030301", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Core Plugs", "catnm4": "Core Plugs", "catnm5": "CP Core Plugs Series", "imgnme": "Core_plugs_xlg_white.jpg|COREPLUG_CPSeries_500x500.jpg", "notes": "\u003Cp id=\u0022\u0022mf276\u0022\u0022\u003EThese versatile core plugs provide exceptional strength. Manufactured in super high-impact thermoplastic resin, these core plugs are designed with as many as 12 supporting ribs to provide added strength and protection of the roll. Lugs on the circumference of the plugs compensate for variations in the ID of cores. The dish-shaped bottom provides more strength than the traditional flat-bottom style.\u003C/p\u003E¶\u003Cp id=\u0022\u0022mf277\u0022\u0022\u003EThe CP9510 is a heavy duty core plug that provides exceptional strength. Manufactured of PPCP resins, this plug is ideal for heavy-weight mill roll products. Designed with a tapered lead for easy installation and a secure fit. These plugs will not swell, shrink, or flake. The CP9510 has no flange for easier stacking.\u003C/p\u003E", "grpatr": "Material|Size|Description|Packaging - Carton Quantity|Standard Colour", "grpflg": "Y" }, { "clsnam": "2220", "clsnbr": "11010304", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Core Plugs", "catnm4": "Core Plugs HD", "catnm5": "", "imgnme": "heavy-duty-app-hi-resF_xlg.jpg", "notes": "Heavy duty core plugs provide exceptional strength for heavy-weight mill roll products", "grpatr": "", "grpflg": "N" }, { "clsnam": "2227", "clsnbr": "1101030401", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Core Plugs", "catnm4": "Core Plugs HD", "catnm5": "CPH Core Plugs (HD) Series", "imgnme": "heavy-duty-app-hi-resF_xlg.jpg", "notes": "Heavy duty core plugs provide exceptional strength for heavy-weight mill roll products. A tapered lead allows for ease of installation and secure fit. These plugs will not swell, shrink or flake off. Designed without a flange so that rolls can be stacked easily. These core plugs are a cost effective way to eliminate expensive wood composites.", "grpatr": "Material|Size|Description|Packaging - Carton Quantity|Standard Colour", "grpflg": "Y" }, { "clsnam": "2221", "clsnbr": "11010305", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Core Plugs", "catnm4": "Double Plugs", "catnm5": "", "imgnme": "double-plug-app-hi-res_xlg.jpg", "notes": "These plugs are manufactured of high-impact thermoplastic HDPE resins for added strength and durability.", "grpatr": "", "grpflg": "N" }, { "clsnam": "2228", "clsnbr": "1101030501", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Core Plugs", "catnm4": "Double Plugs", "catnm5": "D Plugs Double Plug Series", "imgnme": "double-plug-app-hi-res_xlg.jpg", "notes": "These plugs are manufactured of high-impact thermoplastic HDPE resins for added strength and durability. The double plug design eliminates edge damage and eliminates the need to ship in individual cartons.", "grpatr": "Material|Size|Description|Packaging - Carton Quantity|Standard Colour", "grpflg": "Y" }, { "clsnam": "2222", "clsnbr": "11010306", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Core Plugs", "catnm4": "Pad Plugs", "catnm5": "", "imgnme": "pad-plug-app-hi-res_xlg.jpg", "notes": "Pad plugs are specifically designed to secure and protect rolls from damage during storage and shipping.", "grpatr": "", "grpflg": "N" }, { "clsnam": "2229", "clsnbr": "1101030601", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Core Plugs", "catnm4": "Pad Plugs", "catnm5": "PDP Pad Plugs Series", "imgnme": "pad-plug-app-hi-res_xlg.jpg", "notes": "Pad plugs are specifically designed to secure and protect rolls from damage during storage and shipping. Can be used to suspend and unitize larger-diameter rolls shipped on end, lowering the overall cost. These plugs provide complete edge damage protection during shipment and include an integral extension plug.", "grpatr": "Material|Size|Description|Packaging - Carton Quantity|Standard Colour", "grpflg": "Y" }, { "clsnam": "2223", "clsnbr": "11010307", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Core Plugs", "catnm4": "Suspension Plugs", "catnm5": "", "imgnme": "cpr304_xlg.jpg", "notes": "Suspension plugs are designed to provide the strength and ruggedness required to maintain integrity when suspending large, heavy rolls. Made from strong high-impact resistant materials, these plugs are available in a variety of diameters.", "grpatr": "", "grpflg": "N" }, { "clsnam": "2230", "clsnbr": "1101030701", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Core Plugs", "catnm4": "Suspension Plugs", "catnm5": "CPR Suspension Plugs Series", "imgnme": "cpr304_xlg.jpg", "notes": "Suspension plugs are designed to provide the strength and ruggedness required to maintain integrity when suspending large, heavy rolls. Made from strong high-impact resistant materials, these plugs are available in a variety of diameters.", "grpatr": "Material|Size|Description|Packaging - Carton Quantity|Standard Colour", "grpflg": "Y" }, { "clsnam": "1249", "clsnbr": "110104", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "", "catnm5": "", "imgnme": "lg_caplugs_dcf-series_01.jpg", "notes": "\u003CSPAN class=body\u003ECaps, plugs and edge lines for protecting your electronics applications. Available in static dissipative materials and designed for specific connectors including D-subminiature, Coaxial and Micro-D.\u003C/SPAN\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1567", "clsnbr": "11010401", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Caps-Electronics", "catnm5": "", "imgnme": "lg_caplugs_ec-series_01.jpg", "notes": "Caps, plugs and edge lines for protecting your electronics applications. Available in static dissipative materials and dsigned for specific connectors including D-subminiature, Coaxial and Micro-D.¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "2354", "clsnbr": "1101040101", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Caps-Electronics", "catnm5": "AS138 Series", "imgnme": "AS138Series_silo.jpg|AS138Series_group.jpg|DMR_AS138_drawing_600x800.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EDesigned as a protective cap for circular electrical connectors.\u003C/p\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EThe only line of caps in the industry that meets the new SAE Aerospace specification AS85049/138.\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ETooled and engraved in full compliance with AS85409/138 and do not reference any other specifications.\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EThe engraving specifies the specification number, dash number, material code and the Caplugs part number for easy and positive identification.\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EIncludes proper ESD Symbol as per the specification.\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cspan style=\u0022\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EThe parts listed below are in ascending order in relation to the dash number and are repeated for each Material Code (A,B and C).\u003C/span\u003E\u003Cbr style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent:", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]|Packaging - Micro Pak[Micro Pak]", "grpflg": "Y" }, { "clsnam": "1654", "clsnbr": "1101040102", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Caps-Electronics", "catnm5": "C Series", "imgnme": "DMR_CSeries_400x400.jpg|DMR_CSeries_drawing_370x570.jpg", "notes": "The C series caps are straight-sided, thin-walled closures designed to protect threaded connectors. The flanged end allows for easy installation and removal in difficult to reach areas. This versatile design is ideal for a variety of threaded and non-threaded applications.¶¶Material: Low-Density Polyethylene¶Color: Red¶Applicable Specs: NAS-813, NAS-813, MS-90376¶", "grpatr": "To Cap Thread Size|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1655", "clsnbr": "1101040103", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Caps-Electronics", "catnm5": "CBC Series", "imgnme": "DMR_CBCSeries_400x400.jpg|DMR_CBCSeries_drawing_470x400.jpg", "notes": "Series CBC Coaxial Cable Connector Caps are used to protect cable connectors during packaging and shipping. Designed to fit a nominal 3/8 inch diameter, these tethered caps snap securely to keep out dirt and moisture.¶¶Material: Low-Density Polyethylene¶Color: Black¶¶", "grpatr": "To Fit Thread Size|A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1657", "clsnbr": "1101040104", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Caps-Electronics", "catnm5": "DCC Series", "imgnme": "DMR_DCCSeries_400x400.jpg|DMR_DCCSeries_drawing_420x670.jpg", "notes": "DCC Series Caplugs are designed to provide electrostatic discharge protection of rectangular D-subminiature input/output type connectors. Molded with an integral flange to enable easy application and removal, Series DCC is available in either black conductive or pink static dissipative ethylene vinyl acetate. All static dissipative parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10^12 ohms/sq. All conductive parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10^5 ohms/sq.¶¶Material: Static Dissipative Ethylene Vinyl Acetate or Conductive Polyethylene¶Color: Pink or Black¶¶", "grpatr": "No. of Contacts|Contact Type|Material|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1658", "clsnbr": "1101040105", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Caps-Electronics", "catnm5": "DCF Series", "imgnme": "DMR_DCFSeries_400x400.jpg|DMR_DCFSeries_drawing26_670x440.jpg|DMR_DCFSeries_drawing5_670x300.jpg|DMR_DCFSeries_drawing6264_670x250.jpg", "notes": "Series DCF connector caps protect electrical connectors from dust and impact damage. DCF-06 and DCF-08 are designed to fit D-Subminiature connectors with flared shells while DCF-07 is designed to fit D-Subminiature power connectors with flared shells. Series DCF is available in black conductive polyethylene or pink static dissipative polyethylene. All static dissipative parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10 12 ohms/sq. All conductive parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10 5 ohms/sq.¶¶Material: Static Dissipative Polyethylene or Conductive Ethylene¶Color: Pink or Black¶¶", "grpatr": "No. of Contacts|Contact Type|Material|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1659", "clsnbr": "1101040106", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Caps-Electronics", "catnm5": "DS-Q3 Series", "imgnme": "DMR_DSQ3Series_400x400.jpg|DMR_DSQ3Series_drawing_alt_470x670.jpg", "notes": "These non-sloughing caps are designed to meet the stringent requirements of M 5501/32. Manufactured of inherently conductive polymer compound, they have a volume resistance of 10 5 ohms and include the required electrostatic discharge symbol per ASTM D 5445, Symbol 28.", "grpatr": "No. of Contacts|Contact Type|M 5501/32|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1660", "clsnbr": "1101040107", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Caps-Electronics", "catnm5": "EC Series", "imgnme": "DMR_ECSeries_400x400.jpg|DMR_ECSeries_drawing_470x670.jpg", "notes": "Made to protect threaded connectors, Series EC Caps are designed for easy application and removal in areas not readily accessible. They can be installed over threads or cylindrical surfaces.¶¶Material: Low-Density Polyethylene¶Color: Red¶Applicable Specs: MS-90376-R, NAS-813, NAS-831¶¶", "grpatr": "To Cap Nominal Thread Size|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1661", "clsnbr": "1101040108", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Caps-Electronics", "catnm5": "EMC Series", "imgnme": "DMR_EMCSeries_400x400.jpg|DMR_EMCSeries_drawing_670x370.jpg", "notes": "EMC Series Caplugs fit 36- and 68-pin Champ 050 series connector caps and 50-pin Champ-type connectors. All static dissipative parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10 12 ohms/sq. All conductive parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10 5 ohms/sq.¶¶Material: Static Dissipative Ethylene Vinyl Acetate or Conductive Polyethylene¶Color: Pink or Black¶¶", "grpatr": "No. of Contacts|Contact Type|Material|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1662", "clsnbr": "1101040109", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Caps-Electronics", "catnm5": "MDC Series", "imgnme": "DMR_MDCSeries_400x400.jpg|DMR_MDCSeries_drawing_670x420", "notes": "Series MDC connector caps are designed to fit Micro-DC connectors. Series MDC is available in black conductive polyethylene or pink static dissipative polyethylene. All static dissipative parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10 12 ohms/sq. All conductive parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10 5 ohms/sq.¶¶Material: Static Dissipative Ethylene Vinyl Acetate or Conductive Polyethylene¶Color: Pink or Black¶¶", "grpatr": "No. of Contacts|Contact Type|Material|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1663", "clsnbr": "1101040110", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Caps-Electronics", "catnm5": "MSC-RQ2 Series", "imgnme": "DMR_MSCRQ2Series_400x400.jpg|DMR_MSCRQ2Series_drawing_470x670.jpg", "notes": "The MSCQ2 series caps and plugs are manufactured of an inherently conductive polymer compound. This non-sloughing material will not \u0022mark\u0022 or \u0022crayon\u0022 when rubbed against a hard, flat, laminated surface. These non-sloughing caps and plugs, commonly used in military and aerospace, meet the requirements of M 5501/31. These parts offer a volume resistance of 10 to the 5th ohms and are engraved with the EIA RS-471 electrostatic discharge symbol per ASTM D 5445 Symbol 2B.¶¶Part numbers ending in RQ2 are typically used as caps¶¶Material: ICP Compound¶Standard Color: Dark Green¶Applicable Specs: MIL-C-5501/31¶", "grpatr": "Shell Size|M 5501/31|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1664", "clsnbr": "1101040111", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Caps-Electronics", "catnm5": "MSC-YQ2 Series", "imgnme": "DMR_MSCYQ2Series_400x400.jpg|DMR_MSCYQ2Series _drawing_470x670.jpg", "notes": "The MSCQ2 series caps and plugs are manufactured of an inherently conductive polymer compound. This non-sloughing material will not \u0022mark\u0022 or \u0022crayon\u0022 when rubbed against a hard, flat, laminated surface. These non-sloughing caps and plugs, commonly used in military and aerospace, meet the requirements of M 5501/31. These parts offer a volume resistance of 10 to the 5th ohms and are engraved with the EIA RS-471 electrostatic discharge symbol per ASTM D 5445 Symbol 2B.¶¶Part numbers ending in YQ2 are typically used as plugs¶¶Material: ICP Compound¶Standard Color: Dark Green¶Applicable Specs: MIL-C-5501/31¶", "grpatr": "M 5501/31|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1665", "clsnbr": "1101040112", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Caps-Electronics", "catnm5": "SEC Series", "imgnme": "DMR_SECSeries_400x400.jpg|DMR_SECSeries_drawing_470x670.jpg", "notes": "Static Dissipative EC Series Caplugs provide positive ESD and physical protection for all common sizes of threaded electrical and electronic connectors. Also suitable for protecting non-threaded bayonet type connectors. All static dissipative parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10^12 ohms/sq. All conductive parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10^5 ohms/sq.¶¶Material: Static Dissipative Polyethylene¶Color: Pink¶Applicable Specs: MS-90376-RF, AS 90376, NAS 831B¶", "grpatr": "To Cap Nominal Thread Size|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1568", "clsnbr": "11010402", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Plugs-Electronics", "catnm5": "", "imgnme": "lg_caplugs_sep-series_01.jpg", "notes": "Caps, plugs and edge lines for protecting your electronics applications. Available in static dissipative materials and designed for specific connectors including D-subminiature, Coaxial and Micro-D.¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1666", "clsnbr": "1101040201", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Plugs-Electronics", "catnm5": "CEG Series", "imgnme": "DMR_CEGSeries_400x400.jpg|DMR_CEGSeries_drawing_270x570.jpg", "notes": "Caplugs Series CEG Edge Liners securely grip each contact of edgeboard connectors and are also used for single in-line devices. These extruded conductive edge liners are the most cost-effective way to provide both ESD and physical protection for circuit boards and subassemblies. All static dissipative parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10 12 ohms/sq. All conductive parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10 5 ohms/sq.¶¶Material: Conductive Polyethylene¶Color: Black¶¶", "grpatr": "Metal Thickness (in)|Metal Thickness (mm)|A (in)|A (mm)|B (in)|B (mm)|Packaging - No. of 48\u0022 length Pieces|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1667", "clsnbr": "1101040202", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Plugs-Electronics", "catnm5": "CEP Series", "imgnme": "DMR_CEPSeries_400x400.jpg|DMR_CEPSeries_drawing_420x670.jpg", "notes": "Designed to plug the more popular sizes of both threaded and non-threaded, bayonet type electrical and electronic connectors, CEP Conductive Plugs provide electrical shielding as well as mechanical protection. All static dissipative parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10 12 ohms/sq. All conductive parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10 5 ohms/sq.¶¶Material: Conductive Polyethylene¶Color: Black¶Applicable Specs: MS-90376-YB, AS 90376, NAS-837C¶¶", "grpatr": "To Cap Nominal Thread Size[Cap Nominal Thread]|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1668", "clsnbr": "1101040203", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Plugs-Electronics", "catnm5": "DP Series", "imgnme": "DMR_DPSeries_400x400.jpg|DMR_DPCapSeries_drawing_420x570.jpg", "notes": "DP Series Conductive Caplugs are designed to dissipate electrostatic charges, and provide mechanical protection and electrical shielding for ITT Cannon style connectors commonly used in aerospace and military applications. All static dissipative parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10^12 ohms/sq. All conductive parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10^5 ohms/sq.¶¶Material: Conductive Polyethylene¶Color: Black¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1669", "clsnbr": "1101040204", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Plugs-Electronics", "catnm5": "E Series", "imgnme": "DMR_ESeries_400x400.jpg|DMR_ESeries_drawing_370x670.jpg", "notes": "The E series straight-sided, thin-walled closures are designed to protect threaded connectors. The flanged end makes for easy removal in hard-to-reach areas. The versatile design of these plugs make them ideal for use in a variety of threaded and non-threaded applications.¶¶Material: Low-Density Polyethylene¶Color: Yellow¶Applicable Specs: NAS-820, NAS-837¶", "grpatr": "To Fit Thread Size|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1670", "clsnbr": "1101040205", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Plugs-Electronics", "catnm5": "EP Series", "imgnme": "DMR_EPSeries_400x400.jpg|DMR_EPSeries_drawing_470x670.jpg", "notes": "Made to serve as dust and protective closures for threaded connectors, Series EP Plugs are designed for easy application and removal in areas not readily accessible. They can be installed to fit threaded or smooth cylindrical surfaces.¶¶Material: Low-Density Polyethylene¶Color: Yellow¶Applicable Specs: MS-90376-Y, AS 90376, NAS 820, NAS 837¶¶", "grpatr": "To Plug Nominal Thread Size|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1671", "clsnbr": "1101040206", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Plugs-Electronics", "catnm5": "IEC Series", "imgnme": "DMR_IECSeries_400x400.jpg|DMR_IEC14Series_drawing_670x640.jpg", "notes": "These non-conductive plugs are used for female connectors. Use these inexpensive plugs to protect your connectors during transit and storage. The IEC series will keep your connector free of dust, moisture and contaminants. A flanged end offers ease of installation and removal. We launched this series with the IEC-14, and continue to develop new sizes. Please contact us if you need a size we don\u0027t have.¶¶Material: Low-Density Polyethylene¶Color: Black¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1672", "clsnbr": "1101040207", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Plugs-Electronics", "catnm5": "RJ Series", "imgnme": "DMR_RJSeries_400x400.jpg|DMR_RJSeries_drawing_320x670.jpg", "notes": "Contact factory for information on black conductive polyethylene plugs for protecting RJ telephone type jacks on computers.¶¶Material: Conductive Polyethylene¶Color: Black¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|F (in)|F (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1673", "clsnbr": "1101040208", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Plugs-Electronics", "catnm5": "SEP Series", "imgnme": "DMR_SEPSeries_400x400.jpg|DMR_SEPSeries_drawing_470x670.jpg", "notes": "SEP plugs are designed to fit inside both threaded and non-threaded bayonet-type connectors. All static dissipative Caplugs provide a surface resistivity in the range of at least 1x105 ohms/sq, but less than 1x1012. They also meet the static decay test requirements of MIL-PRF-81705D.¶¶Material: Static Dissipative Polyethylene¶Color: Pink¶Applicable Specs: MS-90376-YF, AS 90376, NAS-837B¶", "grpatr": "To Plug Nominal Thread Size|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1674", "clsnbr": "1101040209", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Plugs-Electronics", "catnm5": "USB Series", "imgnme": "DMR_USBBSeries_400x400.jpg|DMR_USBSeries_drawing_370x670.jpg", "notes": "These non-conductive plugs protect type B USB ports. Use these inexpensive plugs to shield female ports from dust, moisture, and contaminants. Caplugs USB plugs have a convenient pull-tab for quick and easy removal. We launched this series the USB-B, and continue to develop new sizes. ¶¶Material: Low-Density Polyethylene¶Color: Black¶Applicable Specs: MS-90376-Y, MS-25177, NAS-820, NAS 837¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]", "grpflg": "Y" }, { "clsnam": "2352", "clsnbr": "1101040210", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Electronics", "catnm4": "Plugs-Electronics", "catnm5": "USB-A-CAP Series", "imgnme": "DMR_USB-ASeries_400x400.jpg|DMR_USB-ASeries_app_670x570.jpg|DMR_USB-ASeries_drawing_470x670.jpg", "notes": "\u003Cp\u003E\u003Cspan style=\u0022\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EThe USB Series cap/plug protect both type A and type B ports from dust, moisture, and contaminants.\u003C/p\u003E¶\u003Cp\u003E\u003Cspan style=\u0022\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EInexpensive protection\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp\u003E\u003Cspan style=\u0022\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin:", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1247", "clsnbr": "110105", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "", "catnm5": "", "imgnme": "lg_caplugs_rer-series_01.jpg", "notes": "\u003CSPAN class=body\u003ECaps, plugs, edge liners and grommets for product finishing applications. This line includes vinyl products including handle grips.\u003C/SPAN\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1449", "clsnbr": "11010501", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Caps", "catnm5": "", "imgnme": "lg_caplugs_cof-series_01.jpg", "notes": "Caplugs has a full line of injection-molded, dip-molded, extruded and die-cut products to finish product edges. They cover any scratches, burrs or distortions that may result from cutting operations. They also provide protection against injury by covering sharp product edges.¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1455", "clsnbr": "1101050101", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Caps", "catnm5": "COF Series", "imgnme": "DMR_COFSeries_400x400.jpg|DMR_COFSeries_drawing_300x670.jpg", "notes": "Series COF Round Caps make economical, attractive glides for everything from household and patio furniture to office chairs and tables, from utility carts to exercise equipment. As finishing caps for both rods and tubing, they cover any scratches, burrs or distortions that may result from cutting operations. They also provide protection against injury from sharp rod and tubing edges.¶¶Material: Low-Density Polyethylene¶Color: Black¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1456", "clsnbr": "1101050102", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Caps", "catnm5": "FCR Series", "imgnme": "DMR_FCRSeries_400x400.jpg|DMR_FCRSeries_drawing_670x420.jpg", "notes": "Series FCR Caplugs are used for finishing ends of round tubing on numerous products such as furniture, lawn and garden equipment, tools and appliances. Heavy wall construction makes them ideal also for threaded connections where extra protection is required. Designed for easy installation, they seat with a firm grip that prevents accidental removal.¶¶Material: Low-Density Polyethylene¶Color: Black¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1457", "clsnbr": "1101050103", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Caps", "catnm5": "RH Series", "imgnme": "DMR_RHSeries_400x400.jpg|DMR_RHSeries_domedrawing_370x470.jpg|DMR_RHSeries_drawing2_560x670.jpg", "notes": "Series RH Caplugs are a combination finishing and protective cap for raised head screws. Plastic overcap snaps over a flanged steel washer, replacing conventional washer. Adds attractive finish to protruding screw heads. Also provides dual protection by preventing injury to personnel scraping against sharp fastener edges and by keeping screw head slots free of foreign matter and paint.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Screw Size|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1457RHW", "clsnbr": "1101050104", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Caps", "catnm5": "RHW Series", "imgnme": "DMR_RHWSeries__400x400.jpg|DMR_RHWSeries_drawing_670x470.jpg|DMR_RHSeries_drawing2_560x670.jpg", "notes": "Series RHW are washers designed to work with Caplugs RH series of finishing caps for raised head screws. The RHW series of washers are durable and available in steel, zinc plate, and stainless steel.¶\u003Cul\u003E¶\u003Cli\u003ECaps are sold separately from washers - please visit the RH Series to purchase caps\u003C/li\u003E¶\u003Cli\u003ERH-06 \u0026 RH-08 caps are used with the following washers:\u003C/li\u003E¶\u003Cul\u003E\u003Cli\u003ERHW-061, RHW-062, RHW-063 \u0026 RHW-081\u003C/li\u003E\u003C/ul\u003E¶\u003Cli\u003ERH-10 \u0026 RH-10 DOME caps are used with the following washers:\u003C/li\u003E¶\u003Cul\u003E\u003Cli\u003ERHW-102, RHW-103, RHW-104 \u0026 RHW-105\u003C/li\u003E\u003C/ul\u003E¶\u003Cli\u003ERH-20 caps are used with the following washers:\u003C/li\u003E¶\u003Cul\u003E\u003Cli\u003ERHW-202, RHW-203, RHW-204, RHW-205, RHW-206 \u0026 RHW-207\u003C/li\u003E\u003C/ul\u003E¶\u003C/ul\u003E¶¶\u003Cstrong\u003EMaterial:\u003C/strong\u003E Steel, zinc plate¶\u003Cstrong\u003EStandard Color:\u003C/strong\u003E Silver", "grpatr": "Screw Size|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1509", "clsnbr": "11010502", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Edge Liners and Grommets", "catnm5": "", "imgnme": "lg_caplugs_egl-series_01.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2298", "clsnbr": "1101050201", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Edge Liners and Grommets", "catnm5": "CTW Series", "imgnme": "CTWSeries_silo.jpg|CTWSeries_app.jpg", "notes": "\u003Cspan style=\u0022\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EThe CTW Series was designed to wrap and cover tubing, wires or anything to be bundled. It protects products from damage while in storage or during shipping. The parts have flexibility to cover a range of sizes or diameters needed. Standard length is 48\u0022\u0022.\u003C/span\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EEasy to install\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EMay be ordered to a specific cut length\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cstrong style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: bold 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EMaterial:\u003C/strong\u003E\u003Cspan style=\u0022\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003EFlexTemp (Thermoplastic Rubber)\u003C/span\u003E\u003Cbr style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; ba", "grpatr": "Suggest Range to Fit A (inch) (in)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1515", "clsnbr": "1101050202", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Edge Liners and Grommets", "catnm5": "EGL Series", "imgnme": "DMR_EGLSeries_400x400.jpg|DMR_EGLSeries_drawing1_570x370.jpg|DMR_EGLSeries_drawing2_370x470.jpg|DMR_EGLSeries_drawing3_270x570.jpg", "notes": "Caplugs Edge Liner offers a convenient method for covering the sharp edges of large or irregularly shaped holes in sheet metal. It is pressed into place around the perimeter of the hole. Series EGL-22 is designed specifically to provide spacers when stacking sheet metal or board to protect the face of the sheet against scratches, to allow for air circulation between sheets, and to protect workers\u0027 hands against sharp edges.¶¶Material: High-Density Polyethylene, Low-Density Polyethylene, Vinyl¶Color: Black (Natural)¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Minimum Bend Radius (in)|Minimum Bend Radius (mm)|Metal Thickness (in)|Metal Thickness (mm)|Packaging", "grpflg": "Y" }, { "clsnam": "1516", "clsnbr": "1101050203", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Edge Liners and Grommets", "catnm5": "GRO Series", "imgnme": "DMR_GROSeries_400x400.jpg|DMR_GROSeries_drawing_400x570.jpg", "notes": "Series GRO Grommets provide mechanical protection for hoses, tubing, shafts, rods and cables as they pass through holes in sheet metal. Easily snapped into place, they are held securely by a molded bead until deliberately removed. UL approved for applications up to 221 ºF (105 ºC).¶¶Material: FlexTemp (Thermosplastic Rubber)¶Color: Black¶¶", "grpatr": "Hole Size (in)|Hole Size (mm)|Metal Thickness (in)|Metal Thickness (mm)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1517", "clsnbr": "1101050204", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Edge Liners and Grommets", "catnm5": "OCB Series", "imgnme": "DMR_OCBSeries_400x400.jpg|DMR_OCBSeries_drawing_370x570.jpg", "notes": "The split design of these bushings allows for side entry and encirclement of pre-assembled harnesses, capillary tubes, or other assemblies that have segments larger than the bushing\u0027s internal diameter. The OCB series is also ideal for holes that already contain cable or tubing. These bushings are easily installed with just fingertip pressure. They will snap-lock into the mounting hole and remain securely in place.¶¶Material: Nylon 6¶Color: Black¶", "grpatr": "Maximum Thickness (in)[Max. Thickness (in)]|Maximum Thickness (mm)[Max. Thickness (mm)]|Mounting Hole Diameter (in)[Mount Hole Dia. (in)]|Mounting Hole Diameter (mm)[Mount Hole Dia. (mm)]|A (in)|A (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1518", "clsnbr": "1101050205", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Edge Liners and Grommets", "catnm5": "SB Series", "imgnme": "DMR_SBSeries_400x400.jpg|DMR_SBSeries_drawing_470x570.jpg", "notes": "The SB series convers raw-edged holes to smooth, neat, insulated holes. Locking fingers easily \u0022snap\u0022 into holes with only fingertip pressure. Once in place these bushings will withstand a push-back force of 35 pounds. The nylon material will insulate and mechanically protect electrical and telecommunication cables, tubing, hoses and utility lines.¶¶Material: Nylon 6¶Color: Black¶", "grpatr": "A (in)|A (mm)|C (in)|C (mm)|D (in)|D (mm)|Maximum Thickness (in)|Maximum Thickness (mm)|Mounting Hole Diameter (in)|Mounting Hole Diameter (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2300", "clsnbr": "1101050206", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Edge Liners and Grommets", "catnm5": "TIE Series", "imgnme": "DMR_TieSeries_400x400.jpg|DMR_TIESeries_drawing_670x500p.jpg", "notes": "\u003Cspan style=\u0022\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003ETIE Series adjustable tie straps are designed to adjust to a range of sizes when pulled tight. An interrupted bead locks the strap to the desired size. It can be easily changed to a different size with the adjustable slip fit lock. \u003C/span\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EEasy to install and remove\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EReuseable\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EDurable\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cstrong style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: bold 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EMaterial:\u003C/strong\u003E\u003Cspan style=\u0022\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003EPolypropylene\u003C/span\u003E\u003Cbr style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-c", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1519", "clsnbr": "1101050207", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Edge Liners and Grommets", "catnm5": "UB Series", "imgnme": "DMR_UBSeries_400x400.jpg|DMR_UBSeries_drawing_400x550.jpg", "notes": "The UB series features flexible shutters that will adjust and accommodate any shape from 1/8\u0022 to 1\u0022. These nylon bushings will absorb vibration while cushioning and insulating cables, tubing, hoses, and shafts. Easily installed with just fingertip pressure, these bushings will lock into place.¶¶Material: Nylon 6¶Color: Black¶¶", "grpatr": "C (in)|C (mm)|D (in)|D (mm)|Maximum Thickness (in)|Maximum Thickness (mm)|Maximum Inside Diameter (in)|Maximum Inside Diameter (mm)|Mounting Hole Diameter (in)|Mounting Hole Diameter (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1450", "clsnbr": "11010503", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Plugs", "catnm5": "", "imgnme": "lg_caplugs_bp-series_01.jpg", "notes": "Caplugs has a full line of injection-molded, dip-molded, extruded and die-cut products to finish product edges. They cover any scratches, burrs or distortions that may result from cutting operations. They also provide protection against injury by covering sharp product edges.¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1470", "clsnbr": "1101050301", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Plugs", "catnm5": "BP Series", "imgnme": "DMR_BPSeries_400x400.jpg|DMR_BPSeries_drawing_410x670.jpg", "notes": "Series BP Button Plugs with recessed-type heads can be used for plugging holes in equipment made of sheet metal, such as automobile bodies, tanks, refrigeration units, etc. Series BP button can be snapped into holes easily and are held in place by a bead until deliberately removed.¶Material: Low-Density Polyethylene.¶Colour: Black**", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Hole Size (in)|Hole Size (mm)|Metal Thickness (in)|Metal Thickness (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1471", "clsnbr": "1101050302", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Plugs", "catnm5": "BPF Series", "imgnme": "DMR_BPFSeries_400x400.jpg|DMR_BPFSeries_drawing_410x670.jpg", "notes": "Series BPF Button Plugs with flush-type heads can be used for plugging holes in equipment made of sheet metal, such as automobile bodies, tanks, refrigeration units, etc. Series BPF Button Plugs can be snapped into holes easily and are held in place by a bead until deliberately removed.¶¶Material: Low Density Polyethylene¶Standard Color: Black¶¶*BPF-5mm, BPF-6mm, BPF-1/4 and BPF-1/4-4 are EVA (ethylene vinyl acetate) material.¶¶**The BPF series was formerly known as the SI series for Niagara Plastics customers.¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Hole Size (in)|Hole Size (mm)|Metal Thickness (in)|Metal Thickness (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1472", "clsnbr": "1101050303", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Plugs", "catnm5": "BPFE Series", "imgnme": "DMR_BPFESeries_400x400.jpg|DMR_BPFESeries_drawing_370x570.jpg", "notes": "Designed primarily to plug holes in sheet metal, typically these plugs are installed manually. Taking this into consideration, Caplugs manufactured the button plug in flexible Santoprene. Not only is it easier to handle, but it makes installation and removal quick and easy. The BPF Ergo offers greater versatility because the pliable nature of the material allows one size plug to fit a variety of different sized holes. ¶¶Material: FlexTemp (Thermoplastic Rubber)¶Color: Black¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Hole Size (in)|Hole Size (mm)|Metal Thickness (in)|Metal Thickness (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1473", "clsnbr": "1101050304", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Plugs", "catnm5": "CCF Series", "imgnme": "DMR_CCFSeries_400x400.jpg|DMR_CCFSeries_drawing_370x570.jpg", "notes": "Durable construction and excellent gliding edges recommend Series CCF Round Plugs for use on a wide range of metal furniture, appliances and similar items. Because they feature a series of externally tapered ribs, a secure fit is ensured. A thick, impact and abrasion resistant base makes Series CCF Plugs ideal tubing closures for products subject to heavy-duty service or exposure to adverse environments. None of caplugs Rib-Lok Load-Bearing Furntire Glides are subject to rust or corrosion.¶¶Material: Low-Density Polyethylene¶Color: Black¶¶", "grpatr": "A - To Fit Tube Size O.D (in)|Gage (Wall Thickness) In|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1656", "clsnbr": "1101050305", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Plugs", "catnm5": "CEC Series", "imgnme": "DMR_CECSeries_500x500.jpg|DMR_CECSeries_drawing_420x670.jpg", "notes": "For all common sizes of threaded electrical and electronic connectors, Caplugs CEC Conductive Caps are also suitable for protecting non-threaded bayonet type connectors. In addition to dissipating electrostatic charges, they provide an electrical shield over the end of the connector. All static dissipative parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10^12 ohms/sq. All conductive parts meet the static decay requirements of MIL-PRF-81705D and surface resistivity is less than 1x10^5 ohms/sq.¶¶Material: Conductive Polyethylene¶Color: Black¶Applicable Specs: MS-90376-RB, AS 90376, NAS 831C¶", "grpatr": "To Cap Nominal Thread Size|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1474", "clsnbr": "1101050306", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Plugs", "catnm5": "DO Series", "imgnme": "DMR_DOSeries_400x400.jpg|DMR_DOSeriesDomed_drawing_470x670.jpg", "notes": "The DO series features the same design as our RER series, but with a domed finish. Ideal for use on a variety of metal furniture as attractive finishing plugs, and to shield against injury and impact against the raw tube end.¶¶Material: Low-Density Polyethylene¶Color: Black¶", "grpatr": "A - To Fit Tube Size O.D (in)|Gage (Wall Thickness) In|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1475", "clsnbr": "1101050307", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Plugs", "catnm5": "DOP Series", "imgnme": "DMR_DOPSeries_400x400.jpg|DMR_DOPSeries_drawing_370x570.jpg", "notes": "The DOP series are finishing plugs for unneeded or unused holes in chassis or other surfaces. These attractive plugs lock firmly into a surface up to 1/4\u0022 thick by simply applying pressure and pushing it into the hole. The convex design tapers to a thin edge for a seamless finish. The matte finish head offers a professional and finished appearance for your product.¶¶Material: Nylon 6¶Color: Black¶", "grpatr": "Maximum Thickness (in)|Maximum Thickness (mm)|Mounting Hole Diameter (in)|Mounting Hole Diameter (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1476", "clsnbr": "1101050308", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Plugs", "catnm5": "FP Series", "imgnme": "DMR_FPSeries_400x400.jpg|DMR_FPSeries_drawing_370x570.jpg", "notes": "Series FP closures are finishing plugs for square tubing. Sized for different gauges, their shoulders fit flush with tubing sides. In addition to keeping dirt and moisture out of sensitive areas, FP Plugs provide a clean finish to the square tube ends on completed products. They also protect against injury from sharp tubing edges.¶¶Material: Low-Density Polyethylene¶Color: Black¶", "grpatr": "To Fit Tube Size (in)|Wall Thickness|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1477", "clsnbr": "1101050309", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Plugs", "catnm5": "PIP Series", "imgnme": "DMR_PIPSeries_400x400.jpg|DMR_PIPSeries_drawing_370x570.jpg", "notes": "PIP Plugs are designed to fit SAE thread sizes. These parts offer the convenience of a push-in plug with the plugging quality of a threaded plug.¶¶Material: Low-Density Polyethylene¶Color: Black¶¶", "grpatr": "SAE Thread Size (in)|NPT Thread Size (mm)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1478", "clsnbr": "1101050310", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Plugs", "catnm5": "PIP-TAB Series", "imgnme": "DMR_PIPTABSeries_400x400.jpg|DMR_PIPTabSeries_drawing_420x570.jpg", "notes": "PIP-Tab Plugs are designed to fit SAE thread sizes. These parts offer the convenience of a push-in plug with the plugging quality of a threaded plug. Series PIP-Tab also has a convenient pull-tab for easy removal.¶¶Material: Low-Density Polyethylene¶Color: Black¶¶", "grpatr": "SAE Thread Size (in)|NPT Thread Size (mm)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1479", "clsnbr": "1101050311", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Plugs", "catnm5": "RER Series", "imgnme": "DMR_RERSeries_400x400.jpg|DMR_RERSeries_drawing_470x470.jpg", "notes": "Featuring the same external rib design of Series SQR Square Plugs, the Series RER Rectangular Plugs are offered in a broad selection of width to length proportions to fit many special tubing shapes found on stands for computer terminals, office machines, display fixtures, and similar metal furnishings and equipment. Durable construction ensures exceptional performance in business and commercial applications. In addition to the RER series, we have several different styles of glides including round and square.¶¶Material: Low-Density Polyethylene¶Color: Black¶¶", "grpatr": "A (in)|B (in)|C (in)|C (mm)|Gage (Wall Thickness)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1480", "clsnbr": "1101050312", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Plugs", "catnm5": "SH Series", "imgnme": "DMR_SHSeries_400x400.jpg|DMR_SHSeries_drawing1_670x370.jpg|DMR_SHSeries_drawing2_470x420.jpg", "notes": "Series SH Caplugs keep foreign matter out of screw head driving recess and counterbore. Ideal for sanitary equipment, screws that need periodic resetting, production and maintenance spray painting, and numerous other applications. Translucent polyethylene ensures visual identification of socket screws.¶¶Material: Low-Density Polyethylene¶Color: Natural¶¶", "grpatr": "Screw Size (in)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1481", "clsnbr": "1101050313", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Plugs", "catnm5": "SQR Series", "imgnme": "DMR_SQRSeries_400x400.jpg|DMR_SQRSeries_drawing_420x670.jpg", "notes": "Series SQR Square Plugs feature a series of externally tapered ribs designed to accommodate a wide range of tubing gauges while also satisfying the fit adjustments on tubing with inside dimensional fluctuations. The exterior ribs are designed to provide a sure grip inside a tube without the unsightly plastic shavings found on many straight wall glide installations. Not subject to rust or corrosion.¶¶Material: Low-Density Polyethylene¶Color: Black¶", "grpatr": "A- To Fit Tube O.D (in)|Gage (Wall Thickness) (in)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1451", "clsnbr": "11010504", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Vinyl", "catnm5": "", "imgnme": "lg_caplugs_vng-series_01.jpg", "notes": "Caplugs has a full line of injection-molded, dip-molded, extruded and die-cut products to finish product edges. They cover any scratches, burrs or distortions that may result from cutting operations. They also provide protection against injury by covering sharp product edges.¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1496", "clsnbr": "1101050401", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Vinyl", "catnm5": "HB Series", "imgnme": "DMR_HBSeries_400x400.jpg|DMR_HBSeries_drawing_270x670.jpg", "notes": "Caplugs hose bend restrictors are tapered for easy installation. These sleeves reduce bending stress near the hose-coupling junction. This added protection prevents damage to the hose and ultimately extends its life cycle. The upper lip firmly attaches to the coupling, holding the restrictor in place, eliminating the need for costly adhesives or clamps. These sleeves are designed to extend the life of a variety of hydraulic and pressure-wash hoses. Material: Vinyl Color: Black", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1497", "clsnbr": "1101050402", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Vinyl", "catnm5": "RERV Series", "imgnme": "DMR_RERVSeries_400x400.jpg|DMR_RERVSeries_drawing_470x470.jpg", "notes": "Often Tubing needs a plug that can be easily installed and removed on a regular basis. Traditional glides and tube plugs were designed to be installed and left permanently. Their rigid design made removal very difficult. Our vinyl glides are injection molded to produce the intricate detail and design typcial tube glides provide, but with a flexible design allowing quick and easy installation and removal without the use of tools. For finishing applications, we can imprint company names, logos, or even instructions. For more information on our vinyl glides,contact customer services at 1-888-CAPLUGS¶¶Material: Vinyl¶Color: Black¶¶", "grpatr": "A (in)|B (in)|C (in)|C (mm)|Gag (Wall Thickness_ (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1498", "clsnbr": "1101050403", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Vinyl", "catnm5": "SQRV Series", "imgnme": "DMR_SQRVSeries_400x400.jpg|DMR_SQRVSeries_drawing_470x670.jpg", "notes": "Traditional glides and tube plugs were designed to be installed and left permanently. Their rigid design made removal very difficult. Our vinyl glides are injection molded to produce the intricate detail and design typical tube glides provide, but with a flexible design allowing quick and easy installation and removal without the use of tools. For finishing applications, we can imprint company names, logos, or even instructions. For more information on our vinyl glides, contact customer services.¶¶Material: Vinyl¶Color: Black¶¶", "grpatr": "A- To Fit Tube O.D (in)|Gage (Wall Thickness) (in)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1499", "clsnbr": "1101050404", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Vinyl", "catnm5": "VAC Series", "imgnme": "DMR_VACSeries_400x400.jpg|DMR_VACSeries_drawing_470x670.jpg", "notes": "Designed to cap angle iron, Series VAC Vinyl Angle Caps are available in a variety of sizes to protect the corners of metal frames, reducing the risk of others being cut by sharp metal edges.¶¶Material: Vinyl¶Standard Color: Black¶Standard Option Colors: White, Green, Brown, Orange, Red, Gray, Blue, Yellow¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1500", "clsnbr": "1101050405", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Vinyl", "catnm5": "VGR Series", "imgnme": "DMR_VGRSeries_400x400.jpg|DMR_VGRSeries_drawing_470x670.jpg", "notes": "Series VGR grips are designed with ergonomic gripping ribs. These durable grips provide a snug fit, and without finger nubs, provide comfort for all hand sizes. Series VGR is also available in UV resistant vinyl material. Call customer service for details.¶¶Material: Vinyl¶Standard Colour: Black¶Standard Option Colours: White, Brown, Orange, Red, Green, Gray, Blue, Yellow¶", "grpatr": "A-OD Minimum (in)|A-OD Minimum (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1501", "clsnbr": "1101050406", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Vinyl", "catnm5": "VHF Series", "imgnme": "DMR_VHFSeries_400x400.jpg|DMR_VHFSeries_drawing_470x670.jpg", "notes": "Series VHF Vinyl Hanger Tips are rectangular caps with a flat hanger tip that provides a snug fit to ensure caps do not fall off. Ideal for tools that need to be hung.¶¶Material: Vinyl¶Standard Color: Black¶Standard Option Colors: White, Brown, Orange, Red, green, Gray, Blue, Yellow¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1502", "clsnbr": "1101050407", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Vinyl", "catnm5": "VHG Series", "imgnme": "DMR_VHGSeries_400x400.jpg|DMR_VHGSeries_drawing_470x670.jpg", "notes": "Designed with both finger nubs and a hanger tip that offers easy storage, Series VHG Vinyl Hanger Grips provide a snug fit to ensure caps do not fall off.¶¶Material: Vinyl¶Standard Color: Black¶Standard Option Colors: White, Brown, Orange, Red, green, Gray, Blue, Yellow¶¶", "grpatr": "A-OD Minimum (in)|A-OD Minimum (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1503", "clsnbr": "1101050408", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Vinyl", "catnm5": "VIF Series", "imgnme": "DMR_VIFSeries_400x400.jpg|DMR_VIFSeries_drawing_470x670.jpg", "notes": "Featuring a unique design that offers excellent protection for metal \u0022I\u0022 shaped frames, Series VIF Vinyl \u0022I\u0022 Metal Frame Caps greatly reduce the risk of others being cut by sharp metal edges.¶¶Material: Vinyl¶Standard Color: Green¶Standard option Colors: White, Black, Brown, Orange, Red, Gray, Blue, Yellow¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1504", "clsnbr": "1101050409", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Vinyl", "catnm5": "VMF Series", "imgnme": "DMR_VMFSeries_400x400.jpg|DMR_VMFSeries_drawing_470x670.jpg", "notes": "Featuring a unique design that offers excellent protection for metal \u0022U\u0022 shaped frames, Series VMF Vinyl \u0022U\u0022 Metal Frame Caps greatly reduce the risk of others being cut by sharp metal edges.¶¶Material: Vinyl¶Standard Color: Green¶Standard Option Colors: White, Black, Brown, Orange, Red, Gray, Blue, Yellow¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1505", "clsnbr": "1101050410", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Vinyl", "catnm5": "VNG Series", "imgnme": "DMR_VNGSeries_400x400.jpg|DMR_VNGSeries_drawing_470x670.jpg", "notes": "Series VNG Vinyl Nubbed Grips are equipped with convenient finger nubs to allow easier gripping. Designed to be used as handles, these reliable grips are durable and attractive.¶¶Material: Vinyl¶Standard Color: Black¶Standard Option Colors: White, Brown, Orange, Red, Green, Gray, Blue, Yellow¶¶", "grpatr": "A-OD Minimum (in)|A-OD Minimum (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1506", "clsnbr": "1101050411", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Vinyl", "catnm5": "VOR Series", "imgnme": "DMR_VORSeries_400x400.jpg|DMR_VORSeries_drawing_670x550.jpg", "notes": "VOR Vinyl O-rings are designed to protect tube ends. Typically used in the automotive, scuba equipment and painting industries, these O-rings provide maximum protection against sharp edges. Available in several common sizes, Series VOR slip on easily and maintain a snug fit. ¶¶Material: Vinyl¶Standard Color: Black¶Standard Option Colors: White, Brown, Orange, Red, Green, Gray, Blue, Yellow¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1520", "clsnbr": "1101050412", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Vinyl", "catnm5": "VRF Series", "imgnme": "DMR_VRFSeries_400x400.jpg|DMR_VRFSeries_drawing_470x670.jpg", "notes": "Vinyl rectangular caps with flat end profile¶¶¶Colour Black ¶Material Vinyl ¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1508", "clsnbr": "1101050413", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Vinyl", "catnm5": "VRR Series", "imgnme": "DMR_VRRSeries_400x400.jpg|DMR_VRRSeries_drawing_370x570.jpg", "notes": "Designed to fit most rectangular tubes and bars, Series VRR Vinyl Rectangular Caps and Grips feature a flat, rounded end. These caps have many applications, including handle grips, paint shields, end caps and ESD covers. They slip on quickly and easily, and maintain a snug fit. Printing is available for Series VRR and new sizes are always being added. Consult factory for all current sizes.¶¶Material: Vinyl¶Standard Color: Black¶Standard Option Colors: White, Brown, Orange, Red, Green, Gray, Blue, Yellow¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1359", "clsnbr": "1101050414", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Finishing", "catnm4": "Vinyl", "catnm5": "VSC Series (Vinyl Square Caps)", "imgnme": "DMR_VSCSeries_400x400.jpg|DMR_VSCSeries_drawing [Converted]_470x670.jpg", "notes": "Series VSC Vinyl Square Caps are strong and tough, yet flexible enough to stretch for a perfect fit. Designed for use with square tubing, these caps are excellent finishing parts. Series VSC is available in a wide range of sizes.¶¶¶¶Material: Vinyl¶¶Standard Colour: Black¶¶Optional Colours*: White, Brown, Orange, Red, Green, Gray, Blue, Yellow¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2621", "clsnbr": "110106", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Hose Guards", "catnm4": "", "catnm5": "", "imgnme": "PTPW-Group_300x300.jpg", "notes": "A full line of hose protection. From the industry leading Pig\u0027s Tail® Spiral Wrap to our anti-abrasion sleeve, hose protection solution for every application and environment. Manufactured under our stringent ISO certified quality management system, we ensure consistent, quality products.", "grpatr": "", "grpflg": "N" }, { "clsnam": "2629", "clsnbr": "11010601", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Hose Guards", "catnm4": "PTFRAS Series", "catnm5": "", "imgnme": "DMR_FireResistant_300x300.jpg", "notes": "Pig\u0027s Tail® Fire Resistant Anti-Static Spiral Wrap series is produced from a conductive thermoplastic compound on a Polyethylene base. A special conductive carbon black is used for conductivity.¶¶In addition to being flame retardant, these wraps are designed to have low electrical resistance, helping to prevent hydraulic hose and cable bundles from building up an electrical charge. Tested to: AS 2600, AS 1180.10B, AS 1180.13A, MSHA # IC-264/0 standards¶¶-Anti-Static and Fire Retardant to prevent accidental flames and sparks in critical environments¶-Allows bundling of multiple or single hose according to requirement¶-MSHA (The Mine Safety and Health Administration) certified and approved for safe usage in mines", "grpatr": "Hose OD Range|Spiral Wrap ID|Wall Thickness|Helix Band Width|Feet Per Roll|Colour", "grpflg": "Y" }, { "clsnam": "2625", "clsnbr": "11010602", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Hose Guards", "catnm4": "PTPW Series", "catnm5": "", "imgnme": "PTPW-Group_300x300.jpg", "notes": "Pig\u0027s Tail® Spiral Protective Wrap Series provides heavy-duty protection to hydraulic and pneumatic hoses from damage and wear. The unique rounded and beveled edges make the wrap easy to install on loose or mounted hoses and cables. Suitable to use with equipment operating across extreme temperature ranges (-40°F to 280°F).¶¶Designed to increase service life of hoses and cables¶Tough HDPE material provides protection from crushing and maintains spiral shape¶UV resistant and protects against UV damage¶Also available in Fire Resistant Anti-Static (FRAS) for advanced protection and Nightglow which glows in the dark for easy identification of hydraulic lines and protection¶¶Material: High Density Polyethylene¶Color: Black, Blue, Yellow, Red", "grpatr": "Hose OD Range|Spiral Wrap ID|Wall Thickness|Helix Band Width|Feet Per Roll|Colour", "grpflg": "Y" }, { "clsnam": "1248", "clsnbr": "110107", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "", "catnm5": "", "imgnme": "dmr-caplugs-masking-ultrabake-caps.jpg", "notes": "\u003CSPAN class=body\u003EA complete line of masking products for the finishing industry. Our standard product line consists of caps, plugs, stoppers, masking tapes, tubing and sheeting. These masking products are available in a range of materials that include: Silicone, EPDM and High Temperature Vinyl.\u003C/SPAN\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1521", "clsnbr": "11010701", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Caps", "catnm5": "", "imgnme": "lg_caplugs_src-series_01.jpg", "notes": "These masking products are available in a range of materials that include: Silicone, EPDM and High Temperature Vinyl.¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1532", "clsnbr": "1101070101", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Caps", "catnm5": "HCR Series", "imgnme": "DMR_HCRSeries_400x400.jpg|DMR_HCRSeries_drawing_400x570.jpg", "notes": "The HCR series caps are temperature-resistant up to and beyond 500F. These sleeves were developed to mask and protect copper tubing during high-temperature masking processes. These caps were designed with exterior ribs to aid in removal and installation. A slightly flared open-end allows them to be easily pushed onto the application.¶¶Material: Flex500¶Colour: Yellow¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1533", "clsnbr": "1101070102", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Caps", "catnm5": "HEZ Series", "imgnme": "DMR_HEZSeries_400x400.jpg|DMR_HEZSeries_drawing_370x670.jpg", "notes": "HEZ series is made of Flex500PLUS, a flexible material specially formulated for the masking industry which withstands temperatures beyond 500º F. Series HEZ caps feature an extra long tab centered at the top of the closure which allows the cap to be finger-removed easily, eliminating the use of tools which could damage threads or part surfaces. HEZ Series caps are ideal for masking applications during painting, plating and powder coating operations. ** Micro Packs have a 2 pack minimum purchase requirement.¶¶If your application is not exposed to extreme heat, try our EZ Series. The EZ series is manufactured in our standard vinyl with heat resistance Dimension up to 350F.¶¶Material: Flex500¶Colour: Black¶Standard Option Colour: Yellow¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1534", "clsnbr": "1101070103", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Caps", "catnm5": "HFC Series", "imgnme": "DMR_HFCSeries_400x400.jpg|DMR_HFCSeries_drawing_370x670", "notes": "HFC series is made of Flex500PLUS, a flexible material specially formulated for the masking industry which withstands temperatures beyond 500º F. Series HFC caps feature a long flat tab centered at the top of the closure which allows easy removal of the cap. HFC Series caps are ideal for masking applications during painting, plating and powder coating operations. ** Micro Packs have a 2 pack minimum purchase requirement.¶¶If your application is not exposed to extreme heat, try our VFC Series. The VFC series is manufactured in our standard vinyl with heat resistance Dimension up to 350F.¶¶Material: Flex500¶Colour: Black¶Standard Option Colour: Yellow¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1535", "clsnbr": "1101070104", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Caps", "catnm5": "HJS Series", "imgnme": "DMR_HJSSeries_400x400.jpg|DMR_HJSSeries_drawing_370x670.jpg", "notes": "Designed to mask fittings during high temperature finishing processes such as powder coating, e-coating, plating, and more. The HJS series is part of our Flex500PLUS line of products designed to ergonomically friendly with a soft, flexible feel and a finger grip, making installation and removal of the cap quick and easy. These caps will not bake onto the fitting. The HJS series maintains its flexibility after masking processes giving you the option of removing it after processing, or leaving the cap on as shipping protection and allowing the end-user to remove it. Material: Flex500 Colour: Black", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1536", "clsnbr": "1101070105", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Caps", "catnm5": "HVC Series", "imgnme": "DMR_HVCSeries_400x400.jpg|DMR_HVCSeries_drawing_370x670.jpg", "notes": "HVC series is made of Flex500PLUS, a flexible material specially formulated for the masking industry which withstands temperatures beyond 500 F. HVC series caps are extremely flexible and durable protective closures which are ideal for use as thread protectors, dust and moisture seals, and for masking during painting, plating or powder coating operations. Micro Packs have a 2 pack minimum purchase requirement.¶¶If your application is not exposed to extreme heat, try our VC Series. The VC series is manufactured in our standard vinyl with heat resistance Dimension up to 350F.¶¶Material: Flex500¶Standard Option Colour: Yellow¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2119", "clsnbr": "1101070106", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Caps", "catnm5": "SC-SH Series", "imgnme": "DMR_SC-SHSeries_400x400.jpg|DMR_SC-SHSeries_drawing_470x670.jpg", "notes": "Ultra Bake Caps\u003Cbr /\u003E\u003Cstrong\u003EPurpose\u003C/strong\u003E \u003Cbr /\u003EUltrabake® Caps are designed to mask plain and threaded studs, tube ends and even slotted holes; they will mask off the stud and allow finishing up to it. \u003Cbr /\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe cap is applied by being pushed over the stud. It is removed by being pulled off. It can be used as a plug by being inserted into threaded or plain holes. However, on holes we would recommend a plug such as the UP series of plugs or the SPP series of pull plugs. If the cap is used as a plug it can be pushed into place using a rounded end rod or dowel. \u003Cbr /\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features¶\u003Cul\u003E¶\u003Cli\u003EFlexible - The cap is flexible so it can fit a range of different diameters and shapes\u003C/li\u003E¶\u003Cli\u003ELengths - Many of the diameters are available in different lengths\u003C/li\u003E¶\u003Cli\u003EReusable - The caps are reusable depending on the application\u003C/li\u003E¶\u003Cli\u003EColour coded - The caps are colour coded to ease identification and sorting\u003C/li\u003E¶\u003Cli\u003EIdentification - The Shercon name is on the cap\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cbr /\u003E\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "Fit Thread-Metric|Fit Thread-UNC|A-IN (in)|A-mm (mm)|B-IN (in)|B-mm (mm)|C-IN (in)|C-mm (mm)", "grpflg": "Y" }, { "clsnam": "1537", "clsnbr": "1101070107", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Caps", "catnm5": "SFC Series", "imgnme": "DMR_SFCSeries_400x400.jpg|DMR_SFCSeries_drawing_300x570.jpg", "notes": "Series SFC Flange Caps feature a design which simplifies the application and removal of the cap. An internal lip on the open end provides a positive seal to prevent paint and other contaminants from seeping onto the part. A flanged head enables the cap to be manually removed with ease.¶¶Material: Silicone Rubber¶Colour: Natural", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1538", "clsnbr": "1101070108", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Caps", "catnm5": "SRC Series", "imgnme": "DMR_SRCSeries_400x400.jpg|DMR_SRCSeries_drawing_370x670.jpg", "notes": "Silicone Rubber Caplugs are ideal for protecting and masking parts undergoing painting, plating, powder coating, anodizing, abrasive chemical processing, or exposure to high temperatures up to 600 ºF (316 ºC). Molded from a specially formulated grade of silicone rubber, these Caplugs contain no coloring agents which could bleed under high temperatures. SRC Series Silicone Rubber Caps are suited especially for covering studs, tube ends, and other projections.¶¶Material: Silicone Rubber¶Colour: Natural", "grpatr": "To Fit Stud Size|A|B|C|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2121", "clsnbr": "1101070109", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Caps", "catnm5": "SRC-SH Series", "imgnme": "DMR_SRC-SHSeries_400x400.jpg|DMR_SRC-SHSeries_drawing_670x470.jpg", "notes": "\u003Cp\u003EUltrabake® Grounding Caps -\u003C/p\u003E¶\u003Cp\u003E\u003Cbr /\u003E\u003Cstrong\u003EPurpose\u003C/strong\u003E\u003C/p\u003E¶\u003Cp\u003EUltrabake® Grounding Caps are designed to mask rectangular tabs; they are effective at masking rectangular grounding or earthing tabs on sheet metal items such as computer cases and PCB holders. \u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E\u003C/p\u003E¶\u003Cp\u003EThe cap is applied by being pushed over the rectangular tab. The cap is removed by being pulled off. The larger sizes of this cap have a tapered opening which allows the coating material to come close to the inside dimensions of the cap.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E\u003C/p\u003E¶\u003Cp\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range Maximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003E\u003Cstrong\u003EDual Purpose\u003C/strong\u003E - The cap can be used as a plug for small rectangular holes or slots\u003C/li\u003E¶\u003Cli\u003E\u003Cstrong\u003ETapered opening\u003C/strong\u003E - Larger sizes have a tapered opening which allows coating to reach the edge of the tab\u003C/li\u003E¶\u003Cli\u003E\u003Cstrong\u003EFlexible\u003C/strong\u003E - The cap is flexible so it can fit a range of different tabs\u003C/li\u003E¶\u003Cli\u003E\u003Cstrong\u003ETight Fit\u003C/strong\u003E - Caps are flexible enough to stretch over tabs and form a tight fit\u003C/li\u003E¶\u003Cli\u003E\u003Cstrong\u003EReusable\u003C/strong\u003E - The caps are reusable depending on the application\u003C/li\u003E¶\u003Cli\u003E\u003Cstrong\u003EColour coded\u003C/strong\u003E - The caps are colour coded to ease identification and sorting\u003C/li\u003E¶\u003Cli\u003E\u003Cstrong\u003EIdentification\u003C/strong\u003E - The Shercon name is on the cap\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp\u003E\u003Cstrong\u003EStorage conditions\u003C/strong\u003E\u003C/p\u003E¶\u003Cp\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.\u003C/p\u003E", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Colour|Packaging -Bag", "grpflg": "Y" }, { "clsnam": "2123", "clsnbr": "1101070110", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Caps", "catnm5": "TS Series", "imgnme": "DMR_TSSeries_400x400.jpg|DMR_TSSeries_drawing_470x670.jpg", "notes": "\u003CP\u003E\u003CSTRONG\u003E\u003CSPAN id=ctl00_cpholder_ctl00_lDescription\u003ETapered Silicone Caps and Plugs\u003C/SPAN\u003E \u003C/STRONG\u003E\u003C/P\u003E¶\u003CP\u003EA new line of patent pending tapered caps / plugs in flexible and durable silicone material. The TS series offers all the versatility of our traditional tapers with the added resilience of silicone. Ideal for use in masking applications that require temperature and corrosion resistance. Available in two durometers: 70 Red and 45 Natural. TS series 70 Red has a more structured, rigid feel, while the 45 Natural offers extreme flexibility. \u003C/P\u003E", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|F (in)|F (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2146", "clsnbr": "1101070111", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Caps", "catnm5": "UVCP-SH Series", "imgnme": "DMR_UVCP-SHSeries_400x400.jpg|DMR_UVCP-SHSeries_drawing_470x670.jpg", "notes": "\u003Cp\u003EVenting Cap Plugs \u003Cstrong\u003E- \u003Cbr /\u003EPurpose \u003C/strong\u003E\u003Cbr /\u003EUltrabake® Venting Cap Plugs are designed to mask plain and threaded studs or holes; there is a small nipple on the top of the mask which can easily be punctured or removed to form the small vent. The masks then mask off the hole or stud and allow trapped air to escape from inside the cap through the vent.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EHow the product is used \u003Cbr /\u003E\u003C/strong\u003EWhen used as a cap the cap is applied by being pushed over the stud, as the cap is pushed onto the stud the trapped air will escape from the inside of the cap allowing the operator to push the cap down into position. It can then be removed by being pulled off. When used as a plug the plug can be pushed into the hole and air will escape from the plug as the plug is pushed into position.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ETemperature Range\u003C/strong\u003E \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003E\u003Cb\u003EVented\u003C/b\u003E - The cap plug is vented to allow trapped air to escape\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EFlexible\u003C/b\u003E - The cap plug is flexible so it can fit over a series of different diameters\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The cap plugs are reusable depending on the application\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EColour coded\u003C/b\u003E - The cap plugs are colour coded to ease identification and sorting\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the cap plug\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Colour|Packaging -Bag", "grpflg": "Y" }, { "clsnam": "2120", "clsnbr": "1101070112", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Caps", "catnm5": "WC-SH Series", "imgnme": "DMR_WC-SHSeries_400x400.jpg|DMR_WC-SHSeries_drawing_470x670.jpg", "notes": "\u003Cp\u003E\u003Cb\u003EUltrabake® Washer Caps - \u003Cbr /\u003E\u003Cbr /\u003EPurpose\u003C/b\u003E \u003Cbr /\u003EUltrabake® Washer Caps are designed to mask plain or threaded holes and studs; they will mask off the hole or stud and leave a circular grounding or earthing area around it.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe cap is applied by being pushed over the stud until the grounding diameter is tight against the face of the area to be masked. The cap is removed by being pulled off. It can be used as a plug by being pushed into the hole. For a hole in sheet metal the cap can be pulled into the hole. However, on holes we would recommend a plug such as the UW series of washer plugs or the UWPP series of washer pull plugs. If the cap is used as a plug it can be pushed into place using a rounded end rod or dowel.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003E\u003Cb\u003EDual Purpose\u003C/b\u003E - The cap can cover studs or plug holes\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003ESizes\u003C/b\u003E - This series offers sizes specifically designed for metric threaded studs\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003ELabor saving\u003C/b\u003E - The washer design eliminates the need for two-stage masking\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EFlexible\u003C/b\u003E - The cap is flexible so it can fit a range of different diameters\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003ETight Fit\u003C/b\u003E - Caps are flexible enough to stretch over large diameters and form a tight fit\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The caps are reusable depending on the application\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EColour coded\u003C/b\u003E - The caps are colour coded to ease identification and sorting\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the cap\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "Fit Thread-Metric|Fit Thread-UNC|A-IN (in)|A-mm (mm)|B-IN (in)|B-mm (mm)|C-IN (in)|C-mm (mm)|D-IN (in)|D-mm (mm)|Colour|Packaging -Bag", "grpflg": "Y" }, { "clsnam": "2122", "clsnbr": "1101070113", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Caps", "catnm5": "ZC-SH Series", "imgnme": "DMR_ZC-SHSeries_400x400.jpg|DMR_ZC-SHSeries_L_drawing_370x670.jpg|DMR_ZC-SHSeries_S_drawing_670x370.jpg", "notes": "\u003Cp\u003E\u003Cstrong\u003EUltrabake® Zerk Caps - \u003Cbr /\u003EPurpose\u003C/strong\u003E \u003Cbr /\u003EZerk Caps are designed specifically to mask Zerk fittings; they will mask off the fitting and allow finishing up to it.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EHow the product is used \u003Cbr /\u003E\u003C/strong\u003EThe cap is applied by being pushed over the fitting. It is removed by being pulled off. Zerk Caps are available in two styles: one with a short handle and another with an extended handle, which eases installation and facilitates removal from hard-to-reach spaces Zerk fittings, also sometimes called Alemite fittings, Grease fittings or Lincoln fittings, are commonly found in the Automotive, Agricultural, and Heavy Equipment industries.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ERecommended for \u003Cbr /\u003E\u003C/strong\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003E\u003Cb\u003EDesign\u003C/b\u003E - Specifically designed for masking Zerk fittings\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003ETight Fit\u003C/b\u003E - Caps are designed to be a tight fit on the fitting\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EHandle\u003C/b\u003E - The handle makes the cap faster to install and remove\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003ELengths\u003C/b\u003E - long and short lengths are available\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EVisible\u003C/b\u003E - The handle makes the cap easier to see on the component\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The caps are reusable depending on the application\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EColour coded\u003C/b\u003E - The caps are colour coded to ease identification and sorting\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the cap\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cstrong\u003EStorage conditions \u003Cbr /\u003E\u003C/strong\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Colour|Packaging -Bag", "grpflg": "Y" }, { "clsnam": "2007", "clsnbr": "11010702", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Hooks", "catnm5": "", "imgnme": "DMR_HookBundles_400x400.jpg", "notes": "\u003CP\u003EUltrabake Hooks are designed for use during powder coating, E-coating and wet painting. They are manufactured from high quality spring tempered steel, Minimal hook mark, Solid metal-to-metal contact for increased conductivity. Consistent grounding for more cycles. Increased hook life with out stripping (burn off). Over 200 standard sizes.\u003C/P\u003E¶\u003CP\u003EA Caplugs/Shercon product line.\u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "2015", "clsnbr": "1101070201", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Hooks", "catnm5": "C-Hooks", "imgnme": "DMR_C-HookSeries_400x400.jpg|DMR_C-HookSeries_drawing_670x470.jpg", "notes": "\u003Cp\u003E\u003Cspan class=\u0022text1\u0022\u003E\u003Cspan class=\u0022text1\u0022\u003EUltrabake Hooks are designed for use during powder coating, E-coating and wet painting.\u003C/span\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003ESolid metal to metal contact\u003C/li\u003E¶\u003Cli\u003EConsistent grounding\u003C/li\u003E¶\u003Cli\u003EHigh strength spring steel\u003C/li\u003E¶\u003Cli\u003ECustom angle available\u003C/li\u003E¶\u003Cli\u003ECustom length available\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp\u003ELoad capacity: 2.6 lbs- 145 lbs\u003C/p\u003E", "grpatr": "Wire Diameter(IN) (in)|Wire Diameter(mm) (mm)|Length (IN) (in)|Length (mm) (mm)|Quantity Per Bag", "grpflg": "Y" }, { "clsnam": "2014", "clsnbr": "1101070202", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Hooks", "catnm5": "CV-Hook", "imgnme": "DMR_CV-HookSeries_400x400.jpg|DMR_CV-HookSeries_drawing_670x470.jpg", "notes": "\u003Cp\u003E\u003Cspan class=\u0022text1\u0022\u003E\u003Cspan class=\u0022text1\u0022\u003EUltrabake Hooks are designed for use during powder coating, E-coating and wet painting.\u003C/span\u003E\u003C/span\u003E\u003C/p\u003E\u003Cul\u003E\u003Cli\u003ESolid metal to metal contact\u003C/li\u003E\u003Cli\u003EConsistent grounding\u003C/li\u003E\u003Cli\u003EHigh strength spring steel\u003C/li\u003E\u003Cli\u003ECustom angle available\u003C/li\u003E\u003Cli\u003ECustom length available\u003C/li\u003E\u003C/ul\u003E\u003Cp\u003ELoad Capacity: 2.6 lbs-145 lbs.\u003C/p\u003E\u003Cp\u003E\u003Cbr /\u003E \u003C/p\u003E", "grpatr": "Wire Diameter(IN) (in)|Wire Diameter(mm) (mm)|Length (IN) (in)|Length (mm) (mm)|Quantity Per Bag", "grpflg": "Y" }, { "clsnam": "2016", "clsnbr": "1101070203", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Hooks", "catnm5": "S-Hook", "imgnme": "DMR_S-HookSeries_400x400.jpg|DMR_S-HookSeries_drawing_670x470.jpg", "notes": "\u003Cp\u003E\u003Cspan class=\u0022text1\u0022\u003E\u003Cspan class=\u0022text1\u0022\u003EUltrabake Hooks are designed for use during powder coating, E-coating and wet painting.\u003C/span\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003ESolid metal to metal contact\u003C/li\u003E¶\u003Cli\u003EConsistent grounding\u003C/li\u003E¶\u003Cli\u003EMinimal hook mark\u003C/li\u003E¶\u003Cli\u003EHigh load capacity (see load chart)\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp\u003ELoad capacity: 2.6 lbs - 145 lbs \u003Cbr /\u003E\u003Cbr /\u003E\u003C/p\u003E", "grpatr": "Wire Diameter(IN) (in)|Wire Diameter(mm) (mm)|Length (IN) (in)|Length (mm) (mm)|Quantity Per Bag", "grpflg": "Y" }, { "clsnam": "2276", "clsnbr": "1101070204", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Hooks", "catnm5": "SHV Snap Hooks", "imgnme": "DMR_SHVSeries_SnapHooks_400x400.jpg|DMR_SHVSeries-SnapHook_drawing_670x470.jpg", "notes": "\u003Cp -webkit-text-stroke-width:=\u0022\u0022 text-indent:=\u0022\u0022 ffffff=\u0022\u0022 background-color:=\u0022\u0022 letter-spacing:=\u0022\u0022 1=\u0022\u0022 widows:=\u0022\u0022 10px=\u0022\u0022 margin:=\u0022\u0022 sans-serif=\u0022\u0022 arial=\u0022\u0022 neue=\u0022\u0022 helvetica=\u0022\u0022 14px=\u0022\u0022 17=\u0022\u0022 12px=\u0022\u0022 font:=\u0022\u0022 333333=\u0022\u0022 color:=\u0022\u0022 none=\u0022\u0022 text-transform:=\u0022\u0022 0px=\u0022\u0022 word-spacing:=\u0022\u0022 normal=\u0022\u0022 white-space:=\u0022\u0022 border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003EOur Ultrabake® hooks are designed for use during powder \u0026 liquid coating processes. They are manufactured from high-quality spring steel.\u003C/p\u003E¶\u003Cul -webkit-text-stroke-width:=\u0022\u0022 text-indent:=\u0022\u0022 ffffff=\u0022\u0022 background-color:=\u0022\u0022 letter-spacing:=\u0022\u0022 1=\u0022\u0022 widows:=\u0022\u0022 10px=\u0022\u0022 sans-serif=\u0022\u0022 arial=\u0022\u0022 neue=\u0022\u0022 helvetica=\u0022\u0022 14px=\u0022\u0022 17=\u0022\u0022 12px=\u0022\u0022 font:=\u0022\u0022 333333=\u0022\u0022 color:=\u0022\u0022 none=\u0022\u0022 text-transform:=\u0022\u0022 0px=\u0022\u0022 word-spacing:=\u0022\u0022 normal=\u0022\u0022 white-space:=\u0022\u0022 border-box=\u0022\u0022 box-sizing:=\u0022\u0022 margin-top:=\u0022\u0022 margin-bottom:=\u0022\u0022\u003E¶\u003Cli border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003EMaintains fixed spacing\u003C/li\u003E¶\u003Cli border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003ELocks firmly into position\u003C/li\u003E¶\u003Cli border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003ESolid metal to metal contact for conductivity\u003C/li\u003E¶\u003Cli border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003EHigh load capacity (see load chart)\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp -webkit-text-stroke-width:=\u0022\u0022 text-indent:=\u0022\u0022 ffffff=\u0022\u0022 background-color:=\u0022\u0022 letter-spacing:=\u0022\u0022 1=\u0022\u0022 widows:=\u0022\u0022 10px=\u0022\u0022 margin:=\u0022\u0022 sans-serif=\u0022\u0022 arial=\u0022\u0022 neue=\u0022\u0022 helvetica=\u0022\u0022 14px=\u0022\u0022 17=\u0022\u0022 12px=\u0022\u0022 font:=\u0022\u0022 333333=\u0022\u0022 color:=\u0022\u0022 none=\u0022\u0022 text-transform:=\u0022\u0022 0px=\u0022\u0022 word-spacing:=\u0022\u0022 normal=\u0022\u0022 white-space:=\u0022\u0022 border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003E\u003Cstrong border-box=\u0022\u0022 box-sizing:=\u0022\u0022 bold=\u0022\u0022 font-weight:=\u0022\u0022\u003EMaterial:\u003Cspan apple-converted-space=\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ESpring Steel\u003Cbr border-box=\u0022\u0022 box-sizing:=\u0022\u0022 /\u003E\u003Cstrong border-box=\u0022\u0022 box-sizing:=\u0022\u0022 bold=\u0022\u0022 font-weight:=\u0022\u0022\u003EStandard Colour:\u003Cspan apple-converted-space=\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EMetal\u003C/p\u003E", "grpatr": "Wire Diameter(IN) (in)|Wire Diameter(mm) (mm)|Length (IN) (in)|Length (mm) (mm)|Quantity Per Bag", "grpflg": "Y" }, { "clsnam": "2017", "clsnbr": "1101070205", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Hooks", "catnm5": "SQV-Hooks", "imgnme": "SQV-SH Series_258x500.jpg|DMR_SQV-SH Series_drawing_670x470.jpg", "notes": "\u003Cul\u003E¶\u003Cli\u003ESolid metal to metal contact\u003C/li\u003E¶\u003Cli\u003Ehigh load capacity (see load chart)\u003C/li\u003E¶\u003Cli\u003EIdeal for Powder Coating \u0026 E-Coating\u003C/li\u003E¶\u003Cli\u003EReduces Hook Mark\u003C/li\u003E¶\u003Cli\u003EConsisting grounding for more cycles\u003C/li\u003E¶\u003Cli\u003EIncreased hook life without stripping (burn-off)\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp\u003ELoad Capacity: 50 lbs - 125 lbs\u003C/p\u003E¶\u003Cp\u003E\u003C/p\u003E", "grpatr": "Wire Diameter(IN) (in)|Wire Diameter(mm) (mm)|Length (IN) (in)|Length (mm) (mm)|Quantity Per Bag", "grpflg": "Y" }, { "clsnam": "2013", "clsnbr": "1101070206", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Hooks", "catnm5": "V-Hook", "imgnme": "DMR_V-HookSeries_400x400.jpg|DMR_V-HookSeries_drawing_670x370.jpg", "notes": "\u003Cp\u003E\u003Cspan class=\u0022text1\u0022\u003E\u003Cspan class=\u0022text1\u0022\u003EUltrabake Hooks are designed for use during powder coating, E-coating and wet painting.\u003C/span\u003E\u003C/span\u003E\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003ESolid metal to metal contact\u003C/li\u003E¶\u003Cli\u003EConsistent grounding\u003C/li\u003E¶\u003Cli\u003EMinimal hook mark\u003C/li\u003E¶\u003Cli\u003EHigh Load capacity (see load chart)\u003C/li\u003E¶\u003Cli\u003EOther angles available on request\u003C/li\u003E¶\u003Cli\u003E¶\u003Cp\u003ELoad Capacity: 4 lbs - 200 lbs\u003C/p\u003E¶\u003C/li\u003E¶\u003C/ul\u003E", "grpatr": "Wire Diameter(IN) (in)|Wire Diameter(mm) (mm)|Length (IN) (in)|Length (mm) (mm)|Angle (Degrees)|Quantity Per Bag", "grpflg": "Y" }, { "clsnam": "2280", "clsnbr": "1101070207", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Hooks", "catnm5": "VB-SH Series Smart Hooks", "imgnme": "VB-SHSeries_group.jpg|dmr-caplugs-masking-smart-hooks-profile.jpg|DMR_VB-SHSeries_drawing_670x470.jpg", "notes": "\u003Cp -webkit-text-stroke-width:=\u0022\u0022 text-indent:=\u0022\u0022 ffffff=\u0022\u0022 background-color:=\u0022\u0022 letter-spacing:=\u0022\u0022 1=\u0022\u0022 widows:=\u0022\u0022 10px=\u0022\u0022 margin:=\u0022\u0022 sans-serif=\u0022\u0022 arial=\u0022\u0022 neue=\u0022\u0022 helvetica=\u0022\u0022 14px=\u0022\u0022 17=\u0022\u0022 12px=\u0022\u0022 font:=\u0022\u0022 333333=\u0022\u0022 color:=\u0022\u0022 none=\u0022\u0022 text-transform:=\u0022\u0022 0px=\u0022\u0022 word-spacing:=\u0022\u0022 normal=\u0022\u0022 white-space:=\u0022\u0022 border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003EVB-SH series Smart Hooks® are available in several sizes. Hooks lock into position with perfect contact every time. Design your own custom rack from our list of stock parts. Series include:\u003C/p\u003E¶\u003Cul -webkit-text-stroke-width:=\u0022\u0022 text-indent:=\u0022\u0022 ffffff=\u0022\u0022 background-color:=\u0022\u0022 letter-spacing:=\u0022\u0022 1=\u0022\u0022 widows:=\u0022\u0022 10px=\u0022\u0022 sans-serif=\u0022\u0022 arial=\u0022\u0022 neue=\u0022\u0022 helvetica=\u0022\u0022 14px=\u0022\u0022 17=\u0022\u0022 12px=\u0022\u0022 font:=\u0022\u0022 333333=\u0022\u0022 color:=\u0022\u0022 none=\u0022\u0022 text-transform:=\u0022\u0022 0px=\u0022\u0022 word-spacing:=\u0022\u0022 normal=\u0022\u0022 white-space:=\u0022\u0022 border-box=\u0022\u0022 box-sizing:=\u0022\u0022 margin-top:=\u0022\u0022 margin-bottom:=\u0022\u0022\u003E¶\u003Cli border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003EBCB-SH bottom cross bar\u003C/li\u003E¶\u003Cli border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003ETCB-SH top cross bar\u003C/li\u003E¶\u003Cli border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003ESpline-SH splines\u003C/li\u003E¶\u003Cli border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003ECB-SH rectangular cross bars\u003C/li\u003E¶\u003Cli border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003ETH-SH top hooks\u003C/li\u003E¶\u003Cli border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003EROD-SH rod and clip sets\u003C/li\u003E¶\u003Cli border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003ESB-SH Smart Bar®\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp -webkit-text-stroke-width:=\u0022\u0022 text-indent:=\u0022\u0022 ffffff=\u0022\u0022 background-color:=\u0022\u0022 letter-spacing:=\u0022\u0022 1=\u0022\u0022 widows:=\u0022\u0022 10px=\u0022\u0022 margin:=\u0022\u0022 sans-serif=\u0022\u0022 arial=\u0022\u0022 neue=\u0022\u0022 helvetica=\u0022\u0022 14px=\u0022\u0022 17=\u0022\u0022 12px=\u0022\u0022 font:=\u0022\u0022 333333=\u0022\u0022 color:=\u0022\u0022 none=\u0022\u0022 text-transform:=\u0022\u0022 0px=\u0022\u0022 word-spacing:=\u0022\u0022 normal=\u0022\u0022 white-space:=\u0022\u0022 border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003E\u003Cstrong border-box=\u0022\u0022 box-sizing:=\u0022\u0022 bold=\u0022\u0022 font-weight:=\u0022\u0022\u003EMaterial:\u003Cspan apple-converted-space=\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ESpring Tempered Steel\u003Cbr border-box=\u0022\u0022 box-sizing:=\u0022\u0022 /\u003E\u003Cstrong border-box=\u0022\u0022 box-sizing:=\u0022\u0022 bold=\u0022\u0022 font-weight:=\u0022\u0022\u003EStandard Colour:\u003Cspan apple-converted-space=\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EMetal\u003C/p\u003E", "grpatr": "Wire Diameter(IN) (in)|Wire Diameter(mm) (mm)|Length (IN) (in)|Length (mm) (mm)|Angle|Quantity Per Bag", "grpflg": "Y" }, { "clsnam": "2169", "clsnbr": "11010703", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Masking Die Cuts", "catnm5": "", "imgnme": "dmr-caplugs-masking-templates.jpg", "notes": "Extremely effective when masking a flat surface, custom die-cuts are quick to apply and remove, and can even be fitted with pull tabs to speed the process.", "grpatr": "", "grpflg": "N" }, { "clsnam": "2173", "clsnbr": "1101070301", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Masking Die Cuts", "catnm5": "AD-SH Series", "imgnme": "AD-SH-disks_white.jpg", "notes": "\u003CTABLE border=0 cellSpacing=1 cellPadding=0 width=\u0022\u0022100%\u0022\u0022\u003E¶\u003CTBODY\u003E¶\u003CTR vAlign=top\u003E¶\u003CTD width=\u0022\u002275%\u0022\u0022\u003E¶\u003CP\u003EAnodizing Discs - \u003CBR\u003E\u003CBR\u003E\u003CSTRONG\u003EDescription \u003CBR\u003E\u003C/STRONG\u003EThese discs are provided in a range of metric and imperial sizes. Discs are provided on a liner, which is wound on a core. The tape that the discs are made from is conformable, will remove cleanly, is abrasion resistant and is chemically resistant. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003EHard Anodizing, Soft Anodizing \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 170 ºF (77 ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability\u003C/STRONG\u003E \u003CBR\u003EIn addition to these discs, Teflon tape is available in roll form in a range of imperial and metric widths. It is also available pre-cut as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003ERectangles\u003C/LI\u003E¶\u003CLI\u003ESquares\u003C/LI\u003E ¶\u003CLI\u003EDonuts\u003C/LI\u003E ¶\u003CLI\u003ECustom Die Cut Shapes\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received. Rolls of discs or die cuts should be stored on end.\u003C/TD\u003E¶\u003CTD width=\u0022\u002225%\u0022\u0022\u003E¶\u003CDIV id=FloatLayer\u003E\u003C/DIV\u003E\u003CBR\u003E\u003C/A\u003E\u003C/TD\u003E\u003C/TR\u003E\u003C/TBODY\u003E\u003C/TABLE\u003E", "grpatr": "Diameter (Fractional) (in)|Diameter (Decimal) (in)|Diameter (Decimal) (mm)|Colour|Packaging - Dots per Roll", "grpflg": "Y" }, { "clsnam": "2174", "clsnbr": "1101070302", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Masking Die Cuts", "catnm5": "AF-SH Series", "imgnme": "AF-SH-Disks_white.jpg", "notes": "\u003CP\u003EAluminum Foil Discs \u003CSTRONG\u003E-\u003C/STRONG\u003E \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EDescription\u003C/STRONG\u003E \u003CBR\u003EThese discs are provided in a range of metric and imperial sizes. Discs are provided on a liner, which is wound on a core. The tape that the discs are made from is moisture and chemically resistant, thermally conductive, heat and light reflective, flame resistant, outdoor weatherable and can help dampen vibration. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003EPainting, Stripping, Electroplating \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 300 ºF (149 ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability\u003C/STRONG\u003E \u003CBR\u003EIn addition to these discs, Aluminum Foil tape is available in roll form in a range of imperial and metric widths. It is also available pre-cut as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003ERectangles\u003C/LI\u003E¶\u003CLI\u003ESquares\u003C/LI\u003E ¶\u003CLI\u003EDonuts\u003C/LI\u003E ¶\u003CLI\u003ECustom Die Cut Shapes\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received. Rolls of discs or die cuts should be stored on end.", "grpatr": "Diameter (Fractional) (in)|Diameter (Decimal) (in)|Diameter (Decimal) (mm)|Colour|Packaging - Disks per Roll", "grpflg": "Y" }, { "clsnam": "2175", "clsnbr": "1101070303", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Masking Die Cuts", "catnm5": "EV-SH Series", "imgnme": "EV-SH-disks_white.jpg", "notes": "\u003CP\u003EElectroplaters Vinyl Tape \u003CSTRONG\u003E-\u003C/STRONG\u003E \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EDescription\u003C/STRONG\u003E \u003CBR\u003EThese discs are provided in a range of metric and imperial sizes. Discs are provided on a liner, which is wound on a core. The tape that the discs are made from is conformable, will remove cleanly, is abrasion resistant and is chemically resistant. It can be used for identification purposes such as color coding items and walkway marking. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003EPlating where good chemical resistance is required \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 170ºF (77ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability\u003C/STRONG\u003E \u003CBR\u003EIn addition to these discs, Teflon tape is available in roll form in a range of imperial and metric widths. It is also available pre-cut as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003ERectangles\u003C/LI\u003E ¶\u003CLI\u003ESquares\u003C/LI\u003E ¶\u003CLI\u003EDonuts\u003C/LI\u003E ¶\u003CLI\u003ECustom Die Cut Shapes\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55ºF (13ºC) and 85ºF (30ºC). It is important to rotate stock and use the product in the order that it is received. Rolls of discs or die cuts should be stored on end", "grpatr": "Diameter (Fractional) (in)|Diameter (Decimal) (in)|Diameter (Decimal) (mm)|Colour|Packaging - Disks per Roll", "grpflg": "Y" }, { "clsnam": "2177", "clsnbr": "1101070304", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Masking Die Cuts", "catnm5": "EZ-SH Series", "imgnme": "dmr-caplugs-masking-e-z-peel-tapes-200f.jpg", "notes": "\u003CP\u003EE-Z Peel® Discs\u003CSTRONG\u003E -\u003C/STRONG\u003E \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EDescription\u003C/STRONG\u003E \u003CBR\u003EE-Z Peel® Discs are manufactured from a high temperature, pressure sensitive masking tape designed for clean removal. It has a fine structured smooth crepe backing with high strength. It provides both resistance to paint flaking and a clean well-defined masking line. Discs are provided on a liner, which is wound on a core. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003ESpray painting \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 200 ºF (93 ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability\u003C/STRONG\u003E \u003CBR\u003EIn addition to these discs, this tape is also available pre-cut as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003ERectangles\u003C/LI\u003E¶\u003CLI\u003ESquares\u003C/LI\u003E¶\u003CLI\u003EDonuts\u003C/LI\u003E¶\u003CLI\u003ECustom Die Cut Shapes\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received. Rolls of discs or die cuts should be stored on end", "grpatr": "Diameter (Fractional) (in)|Diameter (Decimal) (in)|Diameter (Decimal) (mm)|Colour|Packaging - Disks per Roll", "grpflg": "Y" }, { "clsnam": "2179", "clsnbr": "1101070305", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Masking Die Cuts", "catnm5": "GC-SH Series", "imgnme": "dmr-caplugs-masking-glass-cloth-discs-500f.jpg", "notes": "\u003CP\u003EGlass Cloth Discs \u003CSTRONG\u003E-\u003C/STRONG\u003E \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EDescription\u003C/STRONG\u003E \u003CBR\u003EGC Glass Cloth Discs are manufactured from PC198. PC198 is a high temperature tape used to mask off areas that do not require coating or blasting. It has a silicone adhesive with excellent release properties that will not leave an adhesive residue. This tape offers optimum performance in powder coating, blasting/stenciling or electrical insulation applications. Discs are provided on a liner, which is wound on a core. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003EHigh temperature Powder coating, Thermal spraying, Blasting \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 500 ºF (260 ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability\u003C/STRONG\u003E \u003CBR\u003EIn addition to these discs, PC198 is available in roll form in a range of imperial and metric widths. This tape is also available pre-cut as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003ERectangles\u003C/LI\u003E¶\u003CLI\u003ESquares\u003C/LI\u003E¶\u003CLI\u003EDonut\u003C/LI\u003E¶\u003CLI\u003ECustom Die Cut Shapes\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions,at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received. Rolls of discs or die cuts should be stored on end", "grpatr": "Diameter (Fractional) (in)|Diameter (Decimal) (in)|Diameter (Decimal) (mm)|Colour", "grpflg": "Y" }, { "clsnam": "2181", "clsnbr": "1101070306", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Masking Die Cuts", "catnm5": "KD-SH Series", "imgnme": "dmr-caplugs-masking-quick-dot-230f.jpg", "notes": "\u003CP\u003EKwiky Dot® Discs -\u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EDescription\u003C/STRONG\u003E \u003CBR\u003EKD Kwicky Dot® Discs are manufactured from KD11. KD11 is a high temperature, pressure sensitive masking tape designed for clean removal. It performs well in wet strip applications and can be stripped hot. It has a fine structured smooth crepe backing with high strength. It provides both resistance to paint flaking and a clean well-defined masking line. Discs are provided on a liner, which is wound on a core. Diameters between 3/16\u0022 and 1\u0022 are overlapped for rapid application. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003ESpray painting \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 300 ºF (149 ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability \u003CBR\u003E\u003C/STRONG\u003EIn addition to these discs, KD11 is available in roll form in a range of imperial and metric widths. This tape is also available pre-cut as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003ERectangles\u003C/LI\u003E¶\u003CLI\u003ESquares\u003C/LI\u003E¶\u003CLI\u003EDonuts\u003C/LI\u003E¶\u003CLI\u003ECustom Die Cut Shapes\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions \u003CBR\u003E\u003C/STRONG\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received. Rolls of discs or die cuts should be stored on end\u003CBR\u003E\u003CBR\u003E", "grpatr": "Diameter (Fractional) (in)|Diameter (Decimal) (in)|Diameter (Decimal) (mm)|Colour|Packaging - Disks per Roll", "grpflg": "Y" }, { "clsnam": "2183", "clsnbr": "1101070307", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Masking Die Cuts", "catnm5": "KP-SH Series", "imgnme": "dmr-caplugs-masking-polyimide-discs-500f.jpg", "notes": "\u003CP\u003EPolyimide Discs - \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EDescription\u003C/STRONG\u003E \u003CBR\u003EPolyimide Discs are made from #22 Polyimide tape which is a high temperature film tape used for electrical and thermal insulation. The silicone adhesive means the tape has excellent release properties. Discs are provided on a liner, which is wound on a core.\u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003EElectrical insulation, Wave soldering, Masking of circuit boards \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 500 ºF (260 ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability\u003C/STRONG\u003E \u003CBR\u003EIn addition to these discs, #22 Polyimide tape is available in roll form in a range of imperial and metric widths. It is also available pre-cut as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003ERectangles\u003C/LI\u003E¶\u003CLI\u003ESquares\u003C/LI\u003E ¶\u003CLI\u003EDonuts\u003C/LI\u003E ¶\u003CLI\u003ECustom Die Cut Shapes\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions \u003CBR\u003E\u003C/STRONG\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received. Rolls of discs or die cuts should be stored on end.", "grpatr": "Diameter (Fractional) (in)|Diameter (Decimal) (in)|Diameter (Decimal) (mm)|Colour|Packaging - Disks per Roll", "grpflg": "Y" }, { "clsnam": "2185", "clsnbr": "1101070308", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Masking Die Cuts", "catnm5": "LF-SH Series", "imgnme": "LF-SH-Disks_white.jpg", "notes": "\u003CP\u003ELead Foil Discs \u003CSTRONG\u003E-\u003C/STRONG\u003E \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EDescription\u003C/STRONG\u003E \u003CBR\u003EThese discs are available in a range of metric and imperial sizes. Discs are provided on a liner, which is wound on a core. The tape that the discs are made from is electrically conductive, Acid resistant, Malleable, has a high density and has X-ray opacity. Discs or die cuts will appear as dark areas on X-ray film, providing a marker to help locate defects. It is recommended that a burnishing tool be used when positioning the disc, to ensure good contact between the tape and the surface. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003EChrome, cadmium, nickel plating, chemical milling and as a moisture resistant barrier. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 225 ºF (107 ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability \u003CBR\u003E\u003C/STRONG\u003EIn addition to these discs, Lead Foil tape is available in roll form in a range of imperial and metric widths.It is also available pre-cut as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003ERectangles\u003C/LI\u003E¶\u003CLI\u003ESquares\u003C/LI\u003E¶\u003CLI\u003EDonuts\u003C/LI\u003E¶\u003CLI\u003ECustom Die Cut Shapes.\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received. Rolls of discs or die cuts should be stored on end", "grpatr": "Diameter (Fractional) (in)|Diameter (Decimal) (in)|Diameter (Decimal) (mm)|Colour|Packaging - Disks per Roll", "grpflg": "Y" }, { "clsnam": "2187", "clsnbr": "1101070309", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Masking Die Cuts", "catnm5": "PB-SH Series", "imgnme": "dmr-caplugs-masking-die-cuts-powder-peel-green-red-blue-discs.jpg", "notes": "\u003CP\u003EPowder Peel Blue Discs \u003CSTRONG\u003E-\u003C/STRONG\u003E \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EDescription \u003C/STRONG\u003E\u003CBR\u003EPB Blue Discs are manufactured from PC90 a high temperature film tape used to mask off areas that do not require coating. PB Blue Discs have a silicone adhesive with excellent release properties that will not leave an adhesive residue. Discs are provided on a liner, which is wound on a core. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003EPowder coating, E-coating, Anodizing \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 400 ºF (204 ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability\u003C/STRONG\u003E \u003CBR\u003EIn addition to these discs, PC90 is available in roll form in a range of imperial and metric widths. This tape is also available pre-cut as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003ERectangles\u003C/LI\u003E¶\u003CLI\u003ESquares\u003C/LI\u003E¶\u003CLI\u003EDonuts\u003C/LI\u003E¶\u003CLI\u003ECustom Die Cut Shapes\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received. Rolls of discs or die cuts should be stored on end.", "grpatr": "Diameter (Fractional) (in)|Diameter (Decimal) (in)|Diameter (Decimal) (mm)|Colour|Packaging - Disks per Roll", "grpflg": "Y" }, { "clsnam": "2189", "clsnbr": "1101070310", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Masking Die Cuts", "catnm5": "PC-SH Series", "imgnme": "dmr-caplugs-masking-powder-coating-donuts-400f.jpg", "notes": "\u003CP\u003EPowder Peel Green Discs \u003CSTRONG\u003E-\u003C/STRONG\u003E \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EDescription \u003CBR\u003E\u003C/STRONG\u003EPC Green Discs are manufactured from PC21 a high temperature film tape used to mask off areas that do not require coating. PC Green Discs have a silicone adhesive with excellent release properties that will not leave an adhesive residue. Discs are provided on a liner, which is wound on a core. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003EPowder coating, E-coating, Anodizing \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 400 ºF (204 ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability\u003C/STRONG\u003E \u003CBR\u003EIn addition to these discs, PC21 is available in roll form in a range of imperial and metric widths. It is also available pre-cut as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003ERectangles\u003C/LI\u003E¶\u003CLI\u003ESquares\u003C/LI\u003E¶\u003CLI\u003EDonuts\u003C/LI\u003E¶\u003CLI\u003ECustom Die Cut Shapes.\u003C/LI\u003E\u003C/UL\u003EStorage conditions \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received. Rolls of discs or die cuts should be stored on end.", "grpatr": "Diameter (Fractional) (in)|Diameter (Decimal) (in)|Diameter (Decimal) (mm)|Colour|Packaging - Disks per Roll", "grpflg": "Y" }, { "clsnam": "2191", "clsnbr": "1101070311", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Masking Die Cuts", "catnm5": "PR-SH Series", "imgnme": "dmr-caplugs-masking-die-cuts-powder-peel-green-red-blue-discs.jpg", "notes": "\u003CP\u003EPowder Peel Red Discs \u003CSTRONG\u003E-\u003C/STRONG\u003E \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EDescription\u003C/STRONG\u003E \u003CBR\u003EPR Red Discs are manufactured from PC11 a high temperature film tape used to mask off areas that do not require coating. PR Red Discs have a silicone adhesive with excellent release properties that will not leave an adhesive residue. Discs are provided on a liner, which is wound on a core. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003EPowder coating, E-coating, Anodizing \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 425 ºF (220 ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability\u003C/STRONG\u003E \u003CBR\u003EIn addition to these discs, PC11 is available in roll form in a range of imperial and metric widths. It is also available pre-cut as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003ERectangles\u003C/LI\u003E¶\u003CLI\u003ESquares\u003C/LI\u003E¶\u003CLI\u003EDonuts\u003C/LI\u003E¶\u003CLI\u003ECustom Die Cut Shapes\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received. Rolls of discs or die cuts should be stored on end.", "grpatr": "Diameter (Fractional) (in)|Diameter (Decimal) (in)|Diameter (Decimal) (mm)|Colour|Packaging - Disks per Roll", "grpflg": "Y" }, { "clsnam": "2193", "clsnbr": "1101070312", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Masking Die Cuts", "catnm5": "TF-SH Series", "imgnme": "TF-SH-disks_white.jpg", "notes": "\u003CP\u003ETeflon Discs - \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EDescription \u003CBR\u003E\u003C/STRONG\u003EThis tape is electrically conductive, Acid resistant, Malleable, has a high density and has X-ray opacity. Discs or die cuts will appear as dark areas on X-ray film, providing a marker to help locate defects. It is recommended that a burnishing tool be used when positioning the disc, to ensure good contact between the tape and the surface. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E\u003C/P\u003E¶\u003CP\u003EChrome, Cadmium, and Nickel Plating industries \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 400ºF (204ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability \u003CBR\u003E\u003C/STRONG\u003EIn addition to these discs, Teflon tape is available in roll form in a range of imperial and metric widths. It is also available pre-cut as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003ERectangles\u003C/LI\u003E¶\u003CLI\u003ESquares\u003C/LI\u003E¶\u003CLI\u003EDonuts\u003C/LI\u003E¶\u003CLI\u003ECustom Die Cut Shapes\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55ºF (13ºC) and 85ºF (30ºC). It is important to rotate stock and use the product in the order that it is received. Rolls of discs or die cuts should be stored on end.", "grpatr": "Diameter (Fractional) (in)|Diameter (Decimal) (in)|Diameter (Decimal) (mm)|Colour|Packaging - Disks per Roll", "grpflg": "Y" }, { "clsnam": "1524", "clsnbr": "11010704", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Masking Kits", "catnm5": "", "imgnme": "lg_caplugs_mkitvc-series_01.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "1566", "clsnbr": "1101070401", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Masking Kits", "catnm5": "MKIT VC Series", "imgnme": "lg_caplugs_mkitvc-series_01.jpg", "notes": "Series MKIT-VC consists of 2 kit options containing micro paks of pre-selected parts from our standard vinyl line of masking parts with temperature resistance up to 350 ºF. Our small kit, MKIT-VC-062-281, offers a variety of caps \u0026 plugs with diameters ranging from .062\u0022 to .281\u0022 while our large kit, MKIT-VC-312-1000, has diameters ranging from .312\u0022 to 1.000\u0022. If our pre-made vinyl product kits don\u0027t meet your requirements, please contact our customer service dept and we can help you build your own. ¶", "grpatr": "VC|TP", "grpflg": "Y" }, { "clsnam": "1817", "clsnbr": "1101070402", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Masking Kits", "catnm5": "SK-SH SeriesStarter Kits", "imgnme": "DMR_SK-SHSeries_kit_800x800.jpg", "notes": "The SK-SH series are starter kits each containing a small selection of masking products that can be used together.¶¶\u003Cul\u003E\u003Cli\u003EPackaged in a sectioned plastic box with labels to identify the parts\u003C/li\u003E ¶\u003Cli\u003EIdeal for research and development work, small runs or for hobbyists\u003C/li\u003E ¶\u003C/ul\u003E ¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "2113", "clsnbr": "11010705", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Miscellaneous Masking", "catnm5": "", "imgnme": "dmr-caplugs-masking-miscellaneous-plugs.jpg", "notes": "", "grpatr": "", "grpflg": "N" }, { "clsnam": "2232", "clsnbr": "1101070501", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Miscellaneous Masking", "catnm5": "CSC Series", "imgnme": "CSCSeries_silo.jpg|CSCSeries_app.jpg", "notes": "\u003Cspan style=\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003EThe CSC series (Clear Stretchable Covers) , commonly known as shower caps, are economical covers for a wide range of industrial and consumer applications. These covers can be stretched over a variety of applications to protect from dust, contaminant, and moisture. Ideal for masking applications, these plastic covers can be quickly installed and removed. To ensure the cover is visible once on an application, the Caplugs logo is pad printed across the cover in red. Available in 8 different sizes, ranging from 3 3/4\u0022 to 17 1/2\u0022 in diameter (when laying flat). These reusable shower caps are manufactured of 3 mil. transparent polyethylene film and secured with a durable elastic band. Maximum fit/stretch capabilities are not provided, as that will greatly depend upon the application. To ensure you choose the best fit, we encourage you to sample the desired size prior to placing an order. \u003Cbr /\u003E\u003Cbr /\u003EStandard Material: Polyethylene \u003Cbr /\u003EStandard Colour: Clear/Translucent \u003C/span\u003E", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Colour|Packaging -Bag[Package - Bag]", "grpflg": "Y" }, { "clsnam": "2264", "clsnbr": "1101070502", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Miscellaneous Masking", "catnm5": "MDT-SH Series", "imgnme": "MDT-SH-Series_silo.jpg|MDT-SH Series_group.jpg", "notes": "\u003Cspan style=\u0022\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EUltrabake multi-diameter tubing can be used to cover plain and threaded studs, shafts or other cylindrical parts; it will mask off the studs and can be used to mask off areas of shafts. Ideal for powder coating, e-coating, plating, anodizing and spray painting.\u003C/span\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ETemperatures up to 600F\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EFlexible to fit a wide range of diameters\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ECut to length\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EReusable\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cstrong style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: bold 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EMaterial:\u003C/strong\u003E\u003Cspan style=\u0022\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003ESilicone\u003C/span\u003E\u003Cbr style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font", "grpatr": "Dim-DIA. Minimum (in)[Dia. Min. (in)]|Dim-DIA. Minimum (mm)[Dia. Min. (mm)]|Dim-DIA. Maximum (in)[Dia. Max. (in)]|Dim-DIA. Maximum (mm)[Dia. Max. (mm)]|Coil Length|Coil Length|Packaging -Bag[Package - Bag]", "grpflg": "Y" }, { "clsnam": "1465", "clsnbr": "1101070503", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Miscellaneous Masking", "catnm5": "MSP-SH Series", "imgnme": "DMR_MSP-SHSeries_group_400x400.jpg|DMR_MSP-SHSeries_400x400.jpg|DMR_MSP-SHSeries_drawing_540x670.jpg", "notes": "Our MSP-SH Ultrabake Silicone Plugs are designed to plug plain and threaded holes; they will mask off the hole and allow finishing up to it.¶¶Ideal for powder coating, e-coating, plating \u0026 anodizing¶Recommended temperatures up to 600°F (315°C)¶Highly Versatile¶Reusable¶Material: Silicone¶Standard Color: Various (Color-coded for sizing)¶Optional Color: Clear; White", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2167", "clsnbr": "1101070504", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Miscellaneous Masking", "catnm5": "ST-SH Series", "imgnme": "DMR_ST-SHSeries-Coil_670x470.jpg|DMR_ST-SHSeries_570x470.jpg|DMR_ST-SHSeries_drawing_670x520.jpg", "notes": "\u003Cp\u003EUltrabake® Tubing -\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EPurpose\u003C/strong\u003E \u003Cbr /\u003ETo cover plain and threaded studs or shafts; it will mask off the studs and can be used to mask off areas of shafts.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe tubing is applied by being pushed over the stud or shaft. It can be used as a plug by being inserted into threaded or plain holes. However, on holes we would recommend the UP or SPP series of plugs. Tubing is provided in coils on a drum.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ETemperature Range\u003C/strong\u003E \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003E\u003Cb\u003EFlexible\u003C/b\u003E - The tubing is flexible so it can fit a range of different diameters\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The tubing is reusable depending on the application\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003ESizes\u003C/b\u003E - The tubing can be cut to length\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "OD (IN)-ØA (in)[OD - ØA]|ID (IN) -ØB (in)[ID - ØB]|Coil Length (ft)|Coil Length (m)|Colour", "grpflg": "Y" }, { "clsnam": "2262", "clsnbr": "1101070505", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Miscellaneous Masking", "catnm5": "STPS-SH Series", "imgnme": "DMR_STPS-SHSeries_470x670.jpg|STPS-SHSeries_group.jpg", "notes": "\u003Cp style=\u0022\u0022\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u0022\u0022\u003ESTPS-SH Series self-threading plugs are self-tapping and create a leak-proof seal. The handles have holes that can be used for hanging. Recommended for painting, plating \u0026 anodizing.\u003C/p\u003E¶\u003Cul style=\u0022\u0022\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022\u0022\u0022box-sizing: border-box;\u0022\u0022\u0022\u0022\u003ERecommended temperatures up to 180 ºF (82 ºC)\u003C/li\u003E¶\u003Cli style=\u0022\u0022\u0022\u0022box-sizing: border-box;\u0022\u0022\u0022\u0022\u003EChemical resistant\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp style=\u0022\u0022\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022\u0022\u0022Apple-converted-space\u0022\u0022\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ELow-density polyethylene\u003Cbr style=\u0022\u0022\u0022\u0022box-sizing: border-box;\u0022\u0022\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022\u0022\u0022Apple-converted-space\u0022\u0022\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EWhite\u003C/p\u003E", "grpatr": "Thread Size|Thread Size|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2166", "clsnbr": "1101070506", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Miscellaneous Masking", "catnm5": "UC-SH Series", "imgnme": "DMR_UC-SH Series-Coil_670x540.jpg|DMR_UC-SH Series_670x370.jpg", "notes": "\u003CP\u003EUltrabake® Cord \u003CSTRONG\u003E-\u003C/STRONG\u003E \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EPurpose \u003C/STRONG\u003E\u003CBR\u003EUltrabake® Cord can be used as a gasket or O-ring type material to mask off grooves, slots or keyways. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EHow the product is used\u003C/STRONG\u003E \u003CBR\u003EThe cord is applied by being pushed into the groove or recess. It can be used as a plug by being inserted into threaded or plain holes. However, on holes we would recommend the UP or SPP series of plugs. Cord is provided in coils on a drum. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 600 ºF (315 ºC) Design Features \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003E\u003CB\u003EFlexible\u003C/B\u003E - The cord is flexible so it can fit a range of different widths\u003C/LI\u003E¶\u003CLI\u003E\u003CB\u003EReusable\u003C/B\u003E - The cord is reusable depending on the application\u003C/LI\u003E ¶\u003CLI\u003E\u003CB\u003ESizes\u003C/B\u003E - The cord can be cut to length\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "Diameter (in)|Diameter (mm)|Length per Coil (FT)|Length Per Coil (M)|Colour", "grpflg": "Y" }, { "clsnam": "2165", "clsnbr": "1101070507", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Miscellaneous Masking", "catnm5": "US-SH Series", "imgnme": "DMR_US-SHSeries-Group_670x470.jpg|DMR_US-SHSeries_500x360.jpg", "notes": "\u003CP\u003EUltrabake® Sheeting - \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EPurpose \u003C/STRONG\u003E\u003CBR\u003ETo cover large areas. Ultrabake® Sheeting can be die cut into shapes and can be used in conjunction with a double sided tape, to mask off large areas. Alternatively it can simply provide a liner or protective layer on areas that will come into contact with heat. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EHow the product is used\u003C/STRONG\u003E \u003CBR\u003EThe sheeting is provided in 36\u0022 * 36\u0022 (1296 mm * 1296 mm) square pieces in various thickness from 1/32\u0022 (0.79 mm) to 1/2\u0022 (12.7 mm). It can be die cut into shapes for gaskets, pads, strips, washers or seals. Please note, on the thicker materials, the sides may have a slight taper as the die will have a tendency to compress the material before it begins to cut it. \u003CBR\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 600 ºF (315 ºC) Design Features \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003E\u003CB\u003EFlexible\u003C/B\u003E - The sheeting is flexible so it can cover a range of different profiles\u003C/LI\u003E¶\u003CLI\u003E\u003CB\u003ESmooth\u003C/B\u003E - The sheeting is smooth, unlike silicone foam sheeting which has a texture\u003C/LI\u003E ¶\u003CLI\u003E\u003CB\u003EReusable\u003C/B\u003E - The sheeting is reusable depending on the application\u003C/LI\u003E ¶\u003CLI\u003E\u003CB\u003ESizes\u003C/B\u003E - The sheeting can be cut to your requirements\u003C/LI\u003E ¶\u003CLI\u003E\u003CB\u003ECustom Shapes\u003C/B\u003E - The sheeting can be die cut to the shape you require\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "Length (in)|Length (mm)|Width (in)|Width (mm)|Thickness (in)|Thickness (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2265", "clsnbr": "11010706", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Modular Racks", "catnm5": "", "imgnme": "ModularRack.jpg", "notes": "Custom Rack Design", "grpatr": "", "grpflg": "N" }, { "clsnam": "2284", "clsnbr": "1101070601", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Modular Racks", "catnm5": "BCB-SH Series (Bottom Cross Bars)", "imgnme": "BCB_bottom_cross_bars_.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EBCB-SH series bottom cross bars are available in three lengths. Design your own custom rack from our list of stock parts. Series include:\u003C/p\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EBCB-SH bottom cross bar\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ETCB-SH top cross bar\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ESpline-SH splines\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ECB-SH rectangular cross bars\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ETH-SH top hooks\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EROD-SH rod and clip sets\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ESteel\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EMetal\u003C/p\u003E", "grpatr": "Length (in)|Quantity Per Bag", "grpflg": "Y" }, { "clsnam": "2283", "clsnbr": "1101070602", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Modular Racks", "catnm5": "CB-SH Series (Rectangular Cross Bars)", "imgnme": "CB_rec_cross_bars.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003ECB-SH series bottom rectangular cross bars are available in three lengths. Design your own custom rack from our list of stock parts. Series include:\u003C/p\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EBCB-SH bottom cross bar\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ETCB-SH top cross bar\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ESpline-SH splines\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ECB-SH rectangular cross bars\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ETH-SH top hooks\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EROD-SH rod and clip sets\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ESteel\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EMetal\u003C/p\u003E", "grpatr": "Length (in)|Quantity Per Bag", "grpflg": "Y" }, { "clsnam": "2286", "clsnbr": "1101070603", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Modular Racks", "catnm5": "ROD-SH Series (rod \u0026 Clip Sets)", "imgnme": "Rod-SH _rod and clip sets.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EROD-SH series rod and clip sets come in a variety of lengths Design your own custom rack from our list of stock parts. Series include:\u003C/p\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EBCB-SH bottom cross bar\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ETCB-SH top cross bar\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ESpline-SH splines\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ECB-SH rectangular cross bars\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ETH-SH top hooks\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EROD-SH rod and clip sets\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ESteel\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EMetal\u003C/p\u003E", "grpatr": "Length (in)|Quantity Per Bag", "grpflg": "Y" }, { "clsnam": "2279", "clsnbr": "1101070604", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Modular Racks", "catnm5": "SB-SH Series Smart Bar", "imgnme": "smart_bar_silo.jpg|dmr-caplugs-masking-smart-hooks-profile.jpg", "notes": "\u003Cp -webkit-text-stroke-width:=\u0022\u0022 text-indent:=\u0022\u0022 ffffff=\u0022\u0022 background-color:=\u0022\u0022 letter-spacing:=\u0022\u0022 1=\u0022\u0022 widows:=\u0022\u0022 10px=\u0022\u0022 margin:=\u0022\u0022 sans-serif=\u0022\u0022 arial=\u0022\u0022 neue=\u0022\u0022 helvetica=\u0022\u0022 14px=\u0022\u0022 17=\u0022\u0022 12px=\u0022\u0022 font:=\u0022\u0022 333333=\u0022\u0022 color:=\u0022\u0022 none=\u0022\u0022 text-transform:=\u0022\u0022 0px=\u0022\u0022 word-spacing:=\u0022\u0022 normal=\u0022\u0022 white-space:=\u0022\u0022 border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003ESB-SH series SmartBars are available in three lengths. Hooks lock into position with perfect contact every time. Design your own custom rack from our list of stock parts. Series include:\u003C/p\u003E¶\u003Cul -webkit-text-stroke-width:=\u0022\u0022 text-indent:=\u0022\u0022 ffffff=\u0022\u0022 background-color:=\u0022\u0022 letter-spacing:=\u0022\u0022 1=\u0022\u0022 widows:=\u0022\u0022 10px=\u0022\u0022 sans-serif=\u0022\u0022 arial=\u0022\u0022 neue=\u0022\u0022 helvetica=\u0022\u0022 14px=\u0022\u0022 17=\u0022\u0022 12px=\u0022\u0022 font:=\u0022\u0022 333333=\u0022\u0022 color:=\u0022\u0022 none=\u0022\u0022 text-transform:=\u0022\u0022 0px=\u0022\u0022 word-spacing:=\u0022\u0022 normal=\u0022\u0022 white-space:=\u0022\u0022 border-box=\u0022\u0022 box-sizing:=\u0022\u0022 margin-top:=\u0022\u0022 margin-bottom:=\u0022\u0022\u003E¶\u003Cli border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003EBCB-SH bottom cross bar\u003C/li\u003E¶\u003Cli border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003ETCB-SH top cross bar\u003C/li\u003E¶\u003Cli border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003ESpline-SH splines\u003C/li\u003E¶\u003Cli border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003ECB-SH rectangular cross bars\u003C/li\u003E¶\u003Cli border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003ETH-SH top hooks\u003C/li\u003E¶\u003Cli border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003EROD-SH rod and clip sets\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp -webkit-text-stroke-width:=\u0022\u0022 text-indent:=\u0022\u0022 ffffff=\u0022\u0022 background-color:=\u0022\u0022 letter-spacing:=\u0022\u0022 1=\u0022\u0022 widows:=\u0022\u0022 10px=\u0022\u0022 margin:=\u0022\u0022 sans-serif=\u0022\u0022 arial=\u0022\u0022 neue=\u0022\u0022 helvetica=\u0022\u0022 14px=\u0022\u0022 17=\u0022\u0022 12px=\u0022\u0022 font:=\u0022\u0022 333333=\u0022\u0022 color:=\u0022\u0022 none=\u0022\u0022 text-transform:=\u0022\u0022 0px=\u0022\u0022 word-spacing:=\u0022\u0022 normal=\u0022\u0022 white-space:=\u0022\u0022 border-box=\u0022\u0022 box-sizing:=\u0022\u0022\u003E\u003Cstrong border-box=\u0022\u0022 box-sizing:=\u0022\u0022 bold=\u0022\u0022 font-weight:=\u0022\u0022\u003EMaterial:\u003Cspan apple-converted-space=\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ESteel\u003Cbr border-box=\u0022\u0022 box-sizing:=\u0022\u0022 /\u003E\u003Cstrong border-box=\u0022\u0022 box-sizing:=\u0022\u0022 bold=\u0022\u0022 font-weight:=\u0022\u0022\u003EStandard Color:\u003Cspan apple-converted-space=\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EMetal\u003C/p\u003E", "grpatr": "Wire Diameter(IN) (in)|Wire Diameter(mm) (mm)|Length (IN) (in)|Length (mm) (mm)|Quantity Per Bag", "grpflg": "Y" }, { "clsnam": "2282", "clsnbr": "1101070605", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Modular Racks", "catnm5": "SPLINE-SH Series (Splines)", "imgnme": "SPLINE-SH_Splines.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003ESPLINE-SH series splines are available in three lengths. Design your own custom rack from our list of stock parts. Series include:\u003C/p\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EBCB-SH bottom cross bar\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ETCB-SH top cross bar\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ESpline-SH splines\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ECB-SH rectangular cross bars\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ETH-SH top hooks\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EROD-SH rod and clip sets\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ESteel\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EMetal\u003C/p\u003E", "grpatr": "Length (in)|Quantity Per Bag", "grpflg": "Y" }, { "clsnam": "2281", "clsnbr": "1101070606", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Modular Racks", "catnm5": "TCB-SH Series (Top Cross Bar)", "imgnme": "TCB_top_cross_bar_silo.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003ETCB-SH series top cross bars are available in three lengths. Design your own custom rack from our list of stock parts. Series include:\u003C/p\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EBCB-SH bottom cross bar\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ETCB-SH top cross bar\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ESpline-SH splines\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ECB-SH rectangular cross bars\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ETH-SH top hooks\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EROD-SH rod and clip sets\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ESteel\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EMetal\u003C/p\u003E", "grpatr": "Length (in)|Quantity Per Bag", "grpflg": "Y" }, { "clsnam": "2285", "clsnbr": "1101070607", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Modular Racks", "catnm5": "TH-SH Series (Top Hooks)", "imgnme": "TH_top_hooks.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003ETH-SH series top hooks are available in three styles: \u0022\u0022T\u0022\u0022 shape, Ring Top and Shepherd Hook. Design your own custom rack from our list of stock parts. Series include:\u003C/p\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EBCB-SH bottom cross bar\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ETCB-SH top cross bar\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ESpline-SH splines\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ECB-SH rectangular cross bars\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ETH-SH top hooks\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EROD-SH rod and clip sets\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ESteel\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EMetal\u003C/p\u003E", "grpatr": "Top Hooks|Quantity Per Bag", "grpflg": "Y" }, { "clsnam": "1522", "clsnbr": "11010707", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "", "imgnme": "lg_caplugs_srp-series_01.jpg", "notes": "These masking products are available in a range of materials that include: Silicone, EPDM and High Temperature Vinyl.¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "2130", "clsnbr": "1101070701", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "DFPP-SH Series", "imgnme": "DMR_DFPP-SHSeries_group_400x400.jpg|DMR_DFPP-SHSeries_400x400.jpg|DMR_DFPP-SHSeries_drawing_370x670.jpg", "notes": "\u003Cp\u003EDual Flanged Pull Plugs -\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003EPurpose\u003C/strong\u003E \u003Cbr /\u003EDual Flanged Pull Plugs are designed to mask weld nuts and nuts; they will mask off the hole and the first and last thread of a threaded nut or hole.\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe plug is applied by being pulled into the threaded hole of the nut or weld nut until both flanges rest against the faces of the weld nut. The plug is removed by pulling it through the hole.\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E\u003Cul\u003E\u003Cli\u003E\u003Cb\u003EFlanged\u003C/b\u003E - The two flanged areas mask off the first and last thread of a threaded nut or hole.\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EHandle\u003C/b\u003E - The handle area above the flanged diameter helps with insertion and removal\u003C/li\u003E\u003Cli\u003E\u003Cb\u003ESizes\u003C/b\u003E - This series offers sizes specifically designed for metric threaded holes\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EVisible\u003C/b\u003E - The handle area above the flanged diameter makes the plug easier to see on the component\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EColor coded\u003C/b\u003E - The Plugs are color coded to ease identification and sorting\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the plug\u003C/li\u003E\u003C/ul\u003E\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "Thread Size|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2139", "clsnbr": "1101070702", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "FP-SH Series", "imgnme": "DMR_FP-SHSeries_group_400x400.jpg|DMR_FP-SHSeries_400x400.jpg|DMR_FP-SHSeries_drawing_370x670.jpg", "notes": "\u003Cp\u003EE.P.D.M. Flangeless Plugs -\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EPurpose\u003C/strong\u003E \u003Cbr /\u003EFlangeless Plugs are designed to plug threaded holes; they will mask off the hole and can cover a portion of the top thread of the hole to allow coating up to the threads.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe plug is is applied by pushing the tapered ribbed end of the plug into the threaded hole. It can be \u0022screwed\u0022 in, but the profile of the plug is not a thread. The plug can be used on plain bores, but on those, we would recommend the GN or BN series of plugs. \u003Cbr /\u003EThe plug is removed by pulling on the handle.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPlating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 300 ºF (149 ºC) Design Features\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003E\u003Cb\u003ETapered\u003C/b\u003E - The plug is tapered for easy entry and removal\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EHandle\u003C/b\u003E - The plugs have a handle to ease and speed up insertion and removal\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EVisible\u003C/b\u003E - The raised handle makes the plug easier to see on the component\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EHollow\u003C/b\u003E - The larger diameter plugs are hollow making them lighter and more conforming\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the plug \u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp\u003E\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.\u003C/p\u003E", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2127", "clsnbr": "1101070703", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "GN/BN-SH Series", "imgnme": "DMR_GNBN-SHSeries_group_400x400.jpg|DMR_GNBN-SHSeries_400x400.jpg|DMR_GNBN-SHSeries_drawing_520x670.jpg", "notes": "\u003Cp\u003EGreen/Black Neoprene Plugs -\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003EPurpose \u003Cbr /\u003E\u003C/strong\u003EGreen / Black Neoprene Plugs are designed to plug plain and threaded holes; they will mask off the hole and allow finishing up to it.\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe plug is tapered and is applied by pushing the smaller diameter into the hole. The plug is removed by pulling on the larger diameter. \u003Cbr /\u003EThe hole can be a blind hole or a through hole. \u003Cbr /\u003E\u003Cstrong\u003E\u003C/strong\u003E\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003ERecommended for \u003Cbr /\u003E\u003C/strong\u003EPlating, Anodizing, Spray painting, Blasting Temperature Range \u003Cbr /\u003EMaximum temperature 350 ºF (177 ºC) Design Features\u003C/p\u003E\u003Cul\u003E\u003Cli\u003E\u003Cb\u003ETapered\u003C/b\u003E - The plug is tapered and can be fitted into a range of different diameters\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EFlexibility\u003C/b\u003E - The material is soft and conforming. This allows the plug to seal the hole\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the plug\u003C/li\u003E\u003C/ul\u003E\u003Cstrong\u003EStorage conditions \u003Cbr /\u003E\u003C/strong\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "1540", "clsnbr": "1101070704", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "HETV Series", "imgnme": "DMR_HETVSeries_group_400x400.jpg|DMR_HETVSeries_400x400.jpg|DMR_HETVSeries_drawing_570x670.jpg", "notes": "HETV are temperature resistant externally threaded plugs. These flexible plugs can be easily pushed in and removed with no threading required. External threads hold plugs securely in place. ¶¶Material: Flex500¶Color: Black¶Standard Option Color: Yellow¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2255", "clsnbr": "1101070705", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "HFPP-SH Series", "imgnme": "DMR_HFPP-SHSeries_group_400x400.jpg|DMR_HFPP-SHSeries_400x400.jpg|DMR_HFPP-SHSeries_drawing_370x670.jpg", "notes": "\u003Cp style=\u0022\u0022\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u0022\u0022\u003EOur Ultrabake Silicone Flanged Pull Plugs (UFPP-SH series) have a tapered design and hollow core to mask plain and threaded holes; they will mask off the hole and the first thread of a threaded hole. Recommended for powder coating, e-coating, plating \u0026 anodizing.\u003C/p\u003E¶\u003Cul style=\u0022\u0022\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022\u0022\u0022box-sizing: border-box;\u0022\u0022\u0022\u0022\u003ERecommended temperatures up to 600 ºF (315 ºC)\u003C/li\u003E¶\u003Cli style=\u0022\u0022\u0022\u0022box-sizing: border-box;\u0022\u0022\u0022\u0022\u003ETwo stage - The large and small diameters help with insertion\u003C/li\u003E¶\u003Cli style=\u0022\u0022\u0022\u0022box-sizing: border-box;\u0022\u0022\u0022\u0022\u003EHollow to allow liquid to pass through \u0026 and makes it lighter and more conforming\u003C/li\u003E¶\u003Cli style=\u0022\u0022\u0022\u0022box-sizing: border-box;\u0022\u0022\u0022\u0022\u003EReusable\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp style=\u0022\u0022\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022\u0022\u0022Apple-converted-space\u0022\u0022\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ESilicone\u003Cbr style=\u0022\u0022\u0022\u0022box-sizing: border-box;\u0022\u0022\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022\u0022\u0022Apple-converted-space\u0022\u0022\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EVarious (color-coded for sizing)\u003Cbr", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "1542", "clsnbr": "1101070706", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "HTP Series", "imgnme": "DMR_HTPSeries_400x400.jpg|DMR_HTPSeries_drawing_370x670.jpg", "notes": "HTP series is made of Flex500PLUS, a flexible material specially formulated for the masking industry which withstands temperatures beyond 500 º F. Series HTP plugs are designed with a distinct tapered configuration, making them ideal for plugging small holes, ranging in diameter from .080\u0022 to .343\u0022. Flexibility of the vinyl allows these plugs to push in and pull out easily. HTP Series plugs are ideal for masking applications during painting, plating and powder coating operations. ** MicroPaks have a 2 pak minimum purchase requirement.¶¶¶If your application is not exposed to extreme heat, try our TP Series. The TP series is manufactured of our standard vinyl with heat resistantance up to 350F.¶¶Material: Flex500¶Color: Black¶Standard Option Color: Yellow¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2125", "clsnbr": "1101070707", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "HUP-SH Series", "imgnme": "DMR_HUP-SHSeries_group_400x400.jpg|DMR_HUP-SHSeries_400x400.jpg|DMR_HUP-SH_drawing_670x540.jpg", "notes": "\u003Cp\u003EHollow Ultrabake® Plugs -\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EPurpose \u003C/strong\u003E\u003Cbr /\u003EHollow Ultrabake® Plugs are designed to plug plain and threaded holes; they will mask off the hole and allow finishing up to it.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe hole can be a blind hole or a through hole. \u003Cbr /\u003E\u003Cbr /\u003EThe plug is tapered and is applied by pushing the smaller diameter into the hole. The plug is removed by pulling on the larger diameter. \u003Cbr /\u003EThis range of plugs is hollowed out making them lighter.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003E\u003Cb\u003ETapered\u003C/b\u003E - The plug is tapered and can be fitted into a range of different diameters\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EFlexibility\u003C/b\u003E - The material is soft and conforming. This allows the plug to seal the hole\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EHollow\u003C/b\u003E - The plugs are hollow making them lighter and more conforming\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003ETapered Hollow\u003C/b\u003E - The hollow section is tapered to ensure the plug does not trap liquid\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EColor coded\u003C/b\u003E - The plugs are color coded to ease identification and sorting\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the plug\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2136", "clsnbr": "1101070708", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "HUPH-SH Series", "imgnme": "DMR_HUPH-SHSeries_group_400x400.jpg|DMR_HUPH-SHSeries_400x400.jpg|DMR_HUPH-SHSeries_drawing_470x670.jpg", "notes": "\u003Cp\u003EHollow Plugs with Handles -\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EPurpose\u003C/strong\u003E \u003Cbr /\u003EHollow Ultrabake® Plugs with Handles are designed to plug plain and threaded holes; they will mask off the hole and allow finishing up to it.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe plug is tapered and is applied by using the handle to push the smaller diameter into the hole. The plug is removed by pulling on the handle. \u003Cbr /\u003EThe hole can be a blind hole or a through hole. \u003Cbr /\u003E\u003Cbr /\u003EThis range of plugs is hollowed out making them lighter.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003E\u003Cb\u003ETapered\u003C/b\u003E - The plug is tapered and can be fitted into a range of different diameters\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EHandle\u003C/b\u003E - The plugs have a handle to ease and speed up insertion and removal\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EHollow\u003C/b\u003E - The plugs are hollow making them lighter and more conforming\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EVisible\u003C/b\u003E - The handle can help an operator see the mask on the component and therefore speed up removal of masks\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EColor coded\u003C/b\u003E - The Plugs are color coded to ease identification and sorting\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the plug\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "1544", "clsnbr": "1101070709", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "HVTP Series", "imgnme": "DMR_HVTPSeries_400x400.jpg|DMR_HVTPSeries_drawing_370x670.jpg", "notes": "HVTP series is made of Flex500PLUS, a flexible material specially formulated for the masking industry which withstands temperatures beyond 500 ºF. Series HVTP plugs provide a snug fit when pushed into open ports, ensuring a tight closure that will not pop out accidentally during processing or shipping. A simple tug on the flanged lip of an installed HVTP breaks the seal for easy removal. HVTP Series plugs are ideal for masking applications during painting, plating and powder coating operations.¶¶\u003Cb\u003E** MicroPaks have a 2 pak minimum purchase requirement.¶¶If your application is not exposed to extreme heat, try our VTP Series. The VTP series is manufactured in our standard vinyl with heat resistantance up to 350F.¶¶Material: Flex500¶Color: Black¶Standard Option Color: Yellow¶¶", "grpatr": "To Fit Thread Size|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2143", "clsnbr": "1101070710", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "HWP-SH Series", "imgnme": "DMR_HWP-SH Series_group_400x400.jpg|DMR_HWP-SH Series_400x400.jpg|DMR_HWP-SHSeries_drawing_470x670.jpg", "notes": "\u003Cp\u003EHollow Washer Plugs - \u003Cbr /\u003E\u003Cbr /\u003E\u003Cstrong\u003EPurpose\u003C/strong\u003E \u003Cbr /\u003EUltrabake® Hollow Washer Plugs are designed to mask plain and threaded holes; they will mask off the hole and leave a circular grounding or earthing area around the hole.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe hole can be a blind hole or a through hole. \u003Cbr /\u003E\u003Cbr /\u003EThe plug is tapered and is applied by being pushed into the hole and then a rounded end rod or dowel can be pushed into the plug until the larger diameter rests against the face of the area to be masked. For a hole in sheet metal the plug can be pulled into the hole.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003E\u003Cb\u003ETapered\u003C/b\u003E - The plug is tapered for easy insertion and removal\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EHollow\u003C/b\u003E - The plugs are hollow making them lighter and more conforming\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003ELabor saving\u003C/b\u003E - The washer design eliminates the need for two-stage masking\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EColor coded\u003C/b\u003E - The Plugs are color coded to ease identification and sorting\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the plug\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2144", "clsnbr": "1101070711", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "MPP-SH Series", "imgnme": "DMR_MPP-SHSeries_group_400x400.jpg|DMR_MPP-SHSeries_400x400.jpg|DMR_MPP-SHSeries_drawing_540x670.jpg", "notes": "\u003Cp\u003EMiscellaneous Plugs -\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EPurpose:\u003C/strong\u003E \u003Cbr /\u003ETo cover plain and threaded holes, for the powder coating,E-coating, plating, anodizing and spray painting industries. They will mask off the hole and allow finishing up to it.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe plug is applied by being pushed into the hole and by being pulled out.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ERecommended for: \u003Cbr /\u003E\u003C/strong\u003EPowdercoating, E-coating, Plating, Anodizing, Spray Painting\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ETemperature Limit\u003C/strong\u003E \u003Cbr /\u003EMPP-UB - 600 ºF (315 ºC)\u003Cbr /\u003EMPP-BR - 150 ºF (65 ºC)\u003Cbr /\u003EMPP-SP - 600 ºF (315 ºC)\u003Cbr /\u003EMPP-GN - 350 ºF (177 ºC)\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.\u003C/p\u003E", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2258", "clsnbr": "1101070712", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "MT-SH Series", "imgnme": "DMR_MT-SHSeries_group_400x400.jpg|DMR_MT-SHSeries_400x400.jpg|DMR_MT-SHSeries_drawing_370x670.jpg", "notes": "\u003Cspan style=\u0022\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EMouse-tail plugs are ideal when masking small holes. \u003C/span\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EStretchable to provide leak-proof seal\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EReusable\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cstrong style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: bold 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EMaterial:\u003C/strong\u003E\u003Cspan style=\u0022\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003ESilicone or EPDM\u003C/span\u003E\u003Cbr style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: bold 12px/17.14px \u0027Helvet", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Material \u0026 Temp Limit|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2129", "clsnbr": "1101070713", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "PP-SH Series", "imgnme": "DMR_PP-SHSeries_group_400x400.jpg|DMR_PP-SHSeries_400x400.jpg|DMR_PP-SHSeries_drawing_370x670.jpg", "notes": "\u003Cp\u003EE.P.D.M. Pull Plugs -\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003EPurpose \u003C/strong\u003E\u003Cbr /\u003EPull Plugs are designed to plug plain and threaded holes; they will mask off the hole and allow finishing up to it.\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe hole must be a through hole. \u003Cbr /\u003E\u003Cbr /\u003EThe narrow end of the plug is placed into the hole, and then the operator uses the narrower end to pull the larger end through the hole. As the plug is pulled the larger diameter stretches and becomes smaller, allowing the plug to fit through the hole. Once the large end is in position and the plug is released, it forms a tight seal on the hole. \u003Cbr /\u003EThe plug is removed by pulling on the smaller diameter.\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPlating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 350 ºF (177 ºC) Design Features\u003C/p\u003E\u003Cul\u003E\u003Cli\u003E\u003Cb\u003ETwo stage\u003C/b\u003E - The large and small diameters help with insertion and removal\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EFlexibility\u003C/b\u003E - The material is soft and conforming. This allows the plug to seal the hole\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EParallel\u003C/b\u003E - The plug is parallel to form a tight consistent seal\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EHandle\u003C/b\u003E - The handle can help an operator see the mask on the component and therefore speed up removal of masks\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the plug\u003C/li\u003E\u003C/ul\u003E\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "Hole Fit (in)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2135", "clsnbr": "1101070714", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "RCK-SH/SCK-SH Series", "imgnme": "DMR_RCK-SHSeries_group_400x400.jpg|DMR_RCK-SHSeries_400x400.jpg|DMR_RCK-SHSeries_drawing_540x670.jpg", "notes": "\u003Cp\u003ERegular/Short Cork Plugs -\u003Cb\u003E \u003C/b\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EPurpose \u003Cbr /\u003E\u003C/strong\u003ETo plug plain holes, for the painting, plating, anodizing and blasting industries. These short corks can also be used for protection during transportation. They will mask off the hole. How the product is used \u003Cbr /\u003EThe plug is applied by being pushed into the hole. The plug can be used on plain and threaded bores.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPlating, Anodizing, Spray painting and blasting. Temperature Range \u003Cbr /\u003EMaximum temperature 300 ºF (149 ºC)\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EDesign Features\u003C/strong\u003E\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003E\u003Cstrong\u003ESizes \u003C/strong\u003E- This series offers multiple sizes and can be cut to desired length by user.\u003C/li\u003E¶\u003Cli\u003E\u003Cstrong\u003EReusable\u003C/strong\u003E - The plugs are reusable depending on the application\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2256", "clsnbr": "1101070715", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "RMCP-SH Series", "imgnme": "DMR_RMCP-SHSeries_group_400x400.jpg|DMR_RMCP-SHSeries_400x400.jpg|DMR_RMCP-SHSeries_drawing_540x670.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EThe RMCP-SH Series provides the Heating, Ventilation and Air Conditioning (HVAC) industry with a Cap-Plug combination mask for use during coating and pressure testing of HVAC compressors. Eliminates the need for two separate masks and the added labor involved in installing and removing each. The rubber cap/plug reseals itself after any nitrogen charging that may occur for shipping.\u003C/p\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ERubber\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EBlack\u003C/p\u003E", "grpatr": "Tube Size|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "1546", "clsnbr": "1101070716", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "SFL Series", "imgnme": "DMR_SFLSeries_400x400.jpg|DMR_SFLSeries_drawing_670x470.jpg", "notes": "SFL Series flangeless plugs are designed to mask threaded holes, without masking the surrounding area while undergoing painting, plating, powder coating, anodizing, abrasive chemical processing, or exposure to high temperatures. The tapered design allows for many different size holes to be masked using one size plug and also offers a pull-tab for easy removal. The SFL Series is available in an assortment of colors for easy identification.¶¶Material: Silicone Rubber¶Color: See chart¶¶", "grpatr": "Color|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2142", "clsnbr": "1101070717", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "SFP-SH Series", "imgnme": "DMR_SFP-SHSeries_group_400x400.jpg|DMR_SFP-SHSeries_400x400.jpg|DMR_SFP-SHSeries_drawing_470x670.jpg", "notes": "\u003Cp\u003EUltrabake® Flanged Plugs -\u003Cstrong\u003E \u003Cbr /\u003E\u003Cbr /\u003EPurpose\u003C/strong\u003E \u003Cbr /\u003EUltrabake® Flanged Plugs are designed to mask plain and threaded holes; they will mask off the hole and the first thread of a threaded hole.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EFlanged plugs are applied by being pushed into the hole until the flange rests up against the first thread of the threaded hole or the lead in chamfer of the hole. The plug is best inserted by using a rounded end rod or dowel to push the plug into the hole. The sides of the plug are parallel. The domed end helps to start the plug in the hole.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003E\u003Cb\u003EDual purpose\u003C/b\u003E - The plug can be used as a cap on longer studs\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EFlanged\u003C/b\u003E - The flanged area masks off the first thread of a threaded hole\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003ERemoval\u003C/b\u003E - If the plug is used as a cap on longer studs, the flanged diameter can help an operator grip the cap when removing it\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EHandle\u003C/b\u003E - The handle area above the flanged diameter helps with removal\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003ESizes\u003C/b\u003E - This series offers sizes specifically designed for metric threaded holes\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EVisible\u003C/b\u003E - The handle area above the flanged diameter makes the plug easier to see on the component\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EColor coded\u003C/b\u003E - The Plugs are color coded to ease identification and sorting\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the plug\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2141", "clsnbr": "1101070718", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "SP-SH Series", "imgnme": "DMR_SP-SHSeries_group_400x400.jpg|DMR_SP-SHSeries_400x400.jpg|DMR_SP-SHSeries_drawing_370x670.jpg", "notes": "\u003Cp\u003EUltrabake® Step Plugs -\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EPurpose \u003Cbr /\u003E\u003C/strong\u003EUltrabake® Step Plugs are designed to mask plain and threaded holes; they will mask off the hole and leave a small circular grounding or earthing area around the hole.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe plug is applied by pushing the tapered end into the hole until the larger diameter rests against the face of the area to be masked. They are removed by pulling on the handle.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003E\u003Cb\u003ETapered\u003C/b\u003E - The plug is tapered for easy insertion and removal\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003ETwo Stage\u003C/b\u003E - The larger diameter masks off the first thread of a threaded hole or leaves a concentric area around the hole.\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EHandle\u003C/b\u003E - The handle helps with insertion and removal\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003ESizes\u003C/b\u003E - This series offers sizes specifically designed for metric holes\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EVisible\u003C/b\u003E - The larger diameter makes the plug easier to see on the component\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003ELabor saving\u003C/b\u003E - The step design eliminates the need for two-stage masking\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EColor coded\u003C/b\u003E - The Plugs are color coded to ease identification and sorting\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the plug\u003C/li\u003E¶\u003C/ul\u003E ¶\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "1548", "clsnbr": "1101070719", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "SPP Series", "imgnme": "DMR_SPPSeries_400x400.jpg|DMR_SPPSeries_drawing_320x670.jpg", "notes": "SPP Series Pull Plugs are designed to provide complete and positive protection to female-threaded ports and to the inside walls of holes ranging from .091\u0022 to .335\u0022 diameter and in lengths from .62\u0022 to 1.250\u0022.¶¶Material: Silicone Rubber¶Color: Natural¶", "grpatr": "A|B|C|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2128", "clsnbr": "1101070720", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "SPP-SH Series", "imgnme": "DMR_SPP-SHSeries_group_400x400.jpg|DMR_SPP-SHSeries_400x400.jpg|DMR_SPP-SHSeries_drawing_370x670.jpg", "notes": "\u003Cp\u003EUltrabake® Pull Plugs -\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003EPurpose\u003C/strong\u003E \u003Cbr /\u003EUltrabake® Pull Plugs are designed to plug plain and threaded holes; they will mask off the hole and allow finishing up to it.\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe hole must be a through hole. \u003Cbr /\u003EThe narrow end of the plug is placed into the hole, and then the operator uses the narrower end to pull the larger end through the hole. As the plug is pulled the larger diameter stretches and becomes smaller, allowing the plug to fit through the hole. Once the large end is in position and the plug is released, it forms a tight seal on the hole. \u003Cbr /\u003EThe plug is removed by pulling on the smaller diameter.\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003ERecommended for \u003Cbr /\u003E\u003C/strong\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E\u003Cul\u003E\u003Cli\u003E\u003Cb\u003ETwo stage\u003C/b\u003E - The large and small diameters help with insertion and removal\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EFlexibility\u003C/b\u003E - The material is soft and conforming. This allows the plug to seal the hole\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EParallel\u003C/b\u003E - The plug is parallel to form a tight consistent seal\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EHandle\u003C/b\u003E - The handle can help an operator see the mask on the component and therefore speed up removal of masks\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EColor coded\u003C/b\u003E - Ultrabake® Pull Plugs are color coded to ease identification and sorting\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the plug\u003C/li\u003E\u003C/ul\u003E\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "Hole Fit (in)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Colour|Packaging -Bag", "grpflg": "Y" }, { "clsnam": "1550", "clsnbr": "1101070721", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "SRP Series", "imgnme": "DMR_SRPSeries_400x400.jpg|DMR_SRPSeries_drawing2_320x670.jpg", "notes": "SRP Series Plugs have a tapered design for ease in plugging ports and holes in parts undergoing painting, plating, powder coating, anodizing, abrasive chemical processing, or exposure to high temperatures up to 600 ºF (316 ºC). Smaller sizes are solid while larger parts (Caplug No. with an H suffix) have a hollow design.¶¶Material: Silicone Rubber¶Color: Natural¶¶", "grpatr": "A|B|C|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1552", "clsnbr": "1101070722", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "SWP Series", "imgnme": "DMR_SWPSeries_400x400.jpg|DMR_SWPSeries_drawing_320x670.jpg", "notes": "SWP Series silicone washer plugs are designed for masking around a hole for grounding purposes or it can be used as a dual plug. Made of silicone, the SWP series is excellent for high temperature applications up to 600ºF (intermittent). ¶¶Material: Silicone Rubber¶Color: Natural¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2132", "clsnbr": "1101070723", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "UDPP-SH Series", "imgnme": "DMR_UDPP-SHSeries_group_400x400.jpg|DMR_UDPP-SHSeries_400x400.jpg|DMR_UDPP-SH Series_drawing_470x670.jpg", "notes": "\u003Cp\u003EUltrabake® Dual Purpose Plugs -\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003EPurpose \u003Cbr /\u003E\u003C/strong\u003EUltrabake® Dual Purpose Plugs are designed to plug round or square, plain or threaded holes; they will mask off the hole and allow finishing up to it.\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003EHow the product is used \u003Cbr /\u003E\u003C/strong\u003EThe hole can be a blind hole or a through hole. \u003Cbr /\u003EThe hole can be round or square. One side of this plug is round and the other side is square. \u003Cbr /\u003EThe plug is tapered and is applied by pushing the smaller diameter into the hole. The plug is removed by pulling on the end that remains out of the hole.\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E\u003Cul\u003E\u003Cli\u003E\u003Cb\u003EDual Purpose\u003C/b\u003E - One side is round, one side is square\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EHandle\u003C/b\u003E - The side that is not plugging the hole acts as a handle\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EColor coded\u003C/b\u003E - The Plugs are color coded to ease identification and sorting\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the plug\u003C/li\u003E\u003C/ul\u003E\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|F (in)|F (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2138", "clsnbr": "1101070724", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "UFP-SH Series", "imgnme": "DMR_UFP-SHSeries_group_400x400.jpg|DMR_UFP-SHSeries_400x400.jpg|DMR_UFP-SHSeries_drawing_470x670.jpg", "notes": "\u003Cp\u003EUltrabake® Flangeless Plugs -\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EPurpose\u003C/strong\u003E \u003Cbr /\u003EUltrabake® Flangeless Plugs are designed to plug threaded holes; they will mask off the hole and can cover a portion of the top thread of the hole to allow painting or coating up to the threads.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe plug is applied by pushing the tapered ribbed end of the plug into the threaded hole. It can be \u0022screwed\u0022 in, but the profile of the plug is not a thread. The plug can be used on plain bores, but on those, we would recommend the Ultrabake® UP-SH Series of plugs or a pull plug such as the Ultrabake® SPP-SH series of pull plugs. \u003Cbr /\u003EThe plug is removed by pulling on the handle.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003E\u003Cb\u003ETapered\u003C/b\u003E - The plug is tapered for easy insertion and removal\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EHandle\u003C/b\u003E - The plugs have a handle to ease and speed up insertion and removal\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EVisible\u003C/b\u003E - The raised handle makes the plug easier to see on the component\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EHollow\u003C/b\u003E - The larger diameter plugs are hollow making them lighter and more conforming\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EColor coded\u003C/b\u003E - The Plugs are color coded to ease identification and sorting\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the plug\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2260", "clsnbr": "1101070725", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "UHCP-SH Series", "imgnme": "DMR_UHCP-SHSeries_group_400x400.jpg|DMR_UHCP-SHSeries_400x400.jpg|DMR_UHCP-SHSeries_drawing_370x670.jpg", "notes": "\u003Cp style=\u0022\u0022\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u0022\u0022\u003EOur Ultrabake Silicone Hollow Cone Plugs (UHCP-SH Series) are designed to plug plain and threaded holes; they will mask off the hole and allow finishing up to it. Recommended for powder coating, e-coating, plating \u0026 anodizing.\u003C/p\u003E¶\u003Cul style=\u0022\u0022\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022\u0022\u0022box-sizing: border-box;\u0022\u0022\u0022\u0022\u003ERecommended temperatures up to 600 ºF (315 ºC)\u003C/li\u003E¶\u003Cli style=\u0022\u0022\u0022\u0022box-sizing: border-box;\u0022\u0022\u0022\u0022\u003EHollow \u0026 tapered to make this plug highly versatile\u003C/li\u003E¶\u003Cli style=\u0022\u0022\u0022\u0022box-sizing: border-box;\u0022\u0022\u0022\u0022\u003EIdeal for slotted \u0026 oval holes\u003C/li\u003E¶\u003Cli style=\u0022\u0022\u0022\u0022box-sizing: border-box;\u0022\u0022\u0022\u0022\u003EReusable\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp style=\u0022\u0022\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022\u0022\u0022Apple-converted-space\u0022\u0022\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ESilicone\u003Cbr style=\u0022\u0022\u0022\u0022box-sizing: border-box;\u0022\u0022\u0022\u0022 /\u003E\u003Cbr style=\u0022\u0022\u0022\u0022box-sizing: border-box;\u0022\u0022\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022\u0022\u0022Apple-converted-space\u0022\u0022\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EVarious (Color-coded for sizing)\u003C/p\u003E", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2133", "clsnbr": "1101070726", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "UMFP-SH Series", "imgnme": "DMR_UMFP-SHSeries_group_400x400.jpg|DMR_UMFP-SHSeries_400x400.jpg|DMR_UMFP-SHSeries_drawing_370x670.jpg", "notes": "\u003Cp\u003EMulti-Flanged Plugs - \u003Cbr /\u003E\u003Cstrong\u003E\u003C/strong\u003E\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003EPurpose\u003C/strong\u003E \u003Cbr /\u003EUltrabake® Multi-Flanged Plugs are designed to mask plain and threaded holes; they will mask off the hole and will allow painting up to the hole.\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe plug is applied by being pushed into the hole. The plug is tapered and as it is pushed into the hole the flanges or fins compress and bend to grip the side of the hole. One plug can fit a number of different hole diameters.\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E\u003Cul\u003E\u003Cli\u003E\u003Cb\u003ETapered\u003C/b\u003E - The plug is tapered for easy insertion and removal\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EFlexible\u003C/b\u003E - The fins on the plug are flexible so the plug can fit a range of holes\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EHandle\u003C/b\u003E - The plugs have a handle to ease and speed up insertion and removal\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EVisible\u003C/b\u003E - The raised handle makes the plug easier to see on the component\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EColor coded\u003C/b\u003E - The Plugs are color coded to ease identification and sorting\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the plug\u003C/li\u003E\u003C/ul\u003E\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|F (in)|F (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2124", "clsnbr": "1101070727", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "UP-SH Series", "imgnme": "DMR_UP-SHSeries_group_400x400.jpg|DMR_UP-SHSeries_400x400.jpg|DMR_UP-SHSeries_drawing_550x470.jpg", "notes": "\u003Cp\u003EUltrabake® Plugs -\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EPurpose \u003C/strong\u003E\u003Cbr /\u003EUltrabake® Plugs are designed to plug plain and threaded holes; they will mask off the hole and allow finishing up to it.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe plug is tapered and is applied by pushing the smaller diameter into the hole. The plug is removed by pulling on the larger diameter. \u003Cbr /\u003EThe hole can be a blind hole or a through hole. \u003Cbr /\u003E\u003Cstrong\u003E\u003C/strong\u003E\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ERecommended for \u003Cbr /\u003E\u003C/strong\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003E\u003Cb\u003ETapered\u003C/b\u003E - The plug is tapered and can be fitted into a range of different diameters\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EFlexibility\u003C/b\u003E - The material is soft and conforming. This allows the plug to seal the hole\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EColor coded\u003C/b\u003E - The plugs are color coded to ease identification and sorting\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the plug\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2126", "clsnbr": "1101070728", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "UPH-SH Series", "imgnme": "DMR_UPH-SHSeries_group_400x400.jpg|DMR_UPH-SHSeries_400x400.jpg|DMR_UPH-SHSeries_drawing_470x670.jpg", "notes": "\u003Cp\u003EUltrabake Plugs with Handles \u003Cstrong\u003E- \u003Cbr /\u003E\u003C/strong\u003E\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003EPurpose\u003C/strong\u003E \u003Cbr /\u003EUltrabake® Plugs with Handles are designed to plug plain and threaded holes; they will mask off the hole and allow finishing up to it.\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe plug is tapered and is applied by using the handle to push the smaller diameter into the hole. The plug is removed by pulling on the handle located on the larger diameter of the plug. \u003Cbr /\u003EThe hole can be a blind hole or a through hole.\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E\u003Cul\u003E\u003Cli\u003E\u003Cb\u003ETapered\u003C/b\u003E - The plug is tapered and can be fitted into a range of different diameters\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EFlexibility\u003C/b\u003E - The material is soft and conforming. This allows the plug to seal the hole\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EHandle\u003C/b\u003E - The plugs have a handle to ease and speed up insertion and removal\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EVisible\u003C/b\u003E - The handle can help an operator see the mask on the component and therefore speed up removal of masks\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EColor coded\u003C/b\u003E - The Ultrabake® plugs are color coded to ease identification and sorting\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the plug\u003C/li\u003E\u003C/ul\u003E\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2137", "clsnbr": "1101070729", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "UTM-SH Series", "imgnme": "DMR_UTM-SHSeries_group_400x400.jpg|DMR_UTM-SHSeries_400x400.jpg|DMR_UTM-SHSeries_drawing_520x670.jpg", "notes": "\u003Cp\u003EUltrabake® Thread Mask -\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EPurpose \u003Cbr /\u003E\u003C/strong\u003EUltrabake® Thread Masks are designed to mask threaded holes; they will mask off the hole and the first thread of the hole. How the product is used \u003Cbr /\u003EThe plug is applied by being pushed into the threaded hole until the larger diameter is tight against the face of the thread to be masked. The plug is removed by pulling on the handle.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003E\u003Cb\u003EFlanged\u003C/b\u003E - The flanged area masks off the first thread of a threaded hole.\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EHandle\u003C/b\u003E - The handle area above the flanged diameter helps with insertion and removal\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003ESizes\u003C/b\u003E - This series offers sizes specifically designed for metric threaded holes\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EShallow\u003C/b\u003E - The shallow design is ideal for blind holes and helps speed up the masking process\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003ELong Series\u003C/b\u003E - Long series masks have longer handles for hard to reach areas and a longer sealing area\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EVisible\u003C/b\u003E - The handle area above the flanged diameter makes the plug easier to see on the component\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EColor coded\u003C/b\u003E - The Plugs are color coded to ease identification and sorting\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the plug\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2140", "clsnbr": "1101070730", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "UW-SH Series", "imgnme": "DMR_UW-SHSeries_group_400x400.jpg|DMR_UW-SHSeries_400x400.jpg|DMR_UW-SHSeries_drawing_470x670.jpg", "notes": "\u003Cp\u003EUltrabake® Washer Plugs - \u003Cbr /\u003E\u003Cbr /\u003E\u003Cstrong\u003EPurpose\u003C/strong\u003E \u003Cbr /\u003EUltrabake® Washer Plugs are designed to mask plain and threaded holes; they will mask off the hole and leave a circular grounding or earthing area around the hole.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe plug is applied by pushing a tapered end into the hole until the larger diameter rests against the face. These are a dual-purpose plug. On UW-M3 to UW-M12 one side of the plug is designed to fit the metric threaded hole, whilst the other side of the plug is designed to fit a standard metric clear hole. \u003Cbr /\u003EOne end of the plug can be used as a handle to insert and remove the plug.\u003C/p\u003E¶\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003E\u003Cb\u003ETapered\u003C/b\u003E - The plug is tapered for easy entry and removal\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EHandle\u003C/b\u003E - The additional end makes the plug easy to insert and remove\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003ESizes\u003C/b\u003E - This series offers sizes specifically designed for metric threaded holes\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EVisible\u003C/b\u003E - The additional end makes the plug easier to see on the component\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003ELabor saving\u003C/b\u003E - The step design eliminates the need for two-stage masking\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EColor coded\u003C/b\u003E - The Plugs are color coded to ease identification and sorting\u003C/li\u003E¶\u003Cli\u003E\u003Cb\u003EIdentification\u003C/b\u003E - The Shercon name is on the plug\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cstrong\u003EStorage conditions\u003C/strong\u003E \u003Cbr /\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|F (in)|F (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2250", "clsnbr": "1101070731", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "UWM-SH Series", "imgnme": "DMR_UWM-SHSeries_group_400x400.jpg|DMR_UWM-SHSeries_400x400.jpg|DMR_UWM-SHSeries_drawing_670x620.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EUWM-SH Ultrabake® Washer Masks are designed to cover plain and threaded studs. These washers are to be used with the UWPP-SH and UWPPLS-SH Series. They will mask off the stud and allow finishing up to the stud.\u003C/p\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EFor High-temperature processes up to 600 ºF (315 ºC)\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EReusable\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ESilicone\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EVarious (Color-coded for sizing)\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EOptional Color:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EClear; White\u003C/p\u003E", "grpatr": "To Fit Pull Plug|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2131", "clsnbr": "1101070732", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "UWPP-SH Series", "imgnme": "DMR_UWPP-SHSeries_group_400x400.jpg|DMR_UWPP-SHSeries_400x400.jpg|DMR_UWPP-SHSeries_drawing_420x670.jpg", "notes": "\u003Cp\u003E\u003Cb\u003EUltrabake® Washer Pull Plugs -\u003C/b\u003E\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003EPurpose\u003C/strong\u003E \u003Cbr /\u003EUltrabake® Washer Pull Plugs are designed to mask plain and threaded holes; they will mask off the hole and leave a circular grounding or earthing area around the hole.\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe hole must be a through hole. \u003Cbr /\u003EThe plug is applied by being pulled into the hole. The narrow end of the plug is placed into the hole, and then the operator uses the narrower end to pull the larger end through the hole. As the plug is pulled the larger diameter stretches and becomes smaller, allowing the plug to fit through the hole. Once the grounding diameter is tight against the face of the area to be masked, the plug is released. The plug then forms a tight seal on the hole and the grounding area. \u003Cbr /\u003EOne end of the plug is similar in design to a pull plug, whilst the area above the grounding diameter can be used as a handle to remove the plug.\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E\u003Cul\u003E\u003Cli\u003E\u003Cb\u003EDual purpose\u003C/b\u003E - In addition to masking a components grounding area, the plug can be pulled into holes that are counter sunk to mask off the faces of the countersink\u003C/li\u003E\u003Cli\u003E\u003Cb\u003ETwo stage\u003C/b\u003E - The large and small diameters help with insertion\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EHandle\u003C/b\u003E - The handle area above the grounding diameter helps with removal\u003C/li\u003E\u003Cli\u003E\u003Cb\u003ESizes\u003C/b\u003E - This series offers sizes specifically designed for metric threaded holes\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EVisible\u003C/b\u003E - The handle area above the grounding diameter makes the plug easier to see on the component\u003C/li\u003E\u003Cli\u003E\u003Cb\u003ELabor saving\u003C/b\u003E - The washer design eliminates the need for two-stage masking\u003C/li\u003E\u003Cli\u003E\u003Cb\u003ETight fit\u003C/b\u003E - The grounding diameter can be pulled down onto the area to be masked\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EColor coded\u003C/b\u003E -", "grpatr": "Thread Size|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|F (in)|F (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "2134", "clsnbr": "1101070733", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Plugs", "catnm5": "UWPPLS-SH Series", "imgnme": "DMR_UWPPLS-SHSeries_group_400x400.jpg|DMR_UWPPLS-SHSeries_400x400.jpg|DMR_UWPPLS-SHSeries_drawing_370x670.jpg", "notes": "\u003Cp\u003EWasher Pull Plug - Long Series -\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003EPurpose \u003Cbr /\u003E\u003C/strong\u003EUltrabake® Washer Pull Plugs Long Series are designed to mask plain and threaded holes; they will mask off the hole and leave a circular grounding or earthing area around the hole.\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003EHow the product is used\u003C/strong\u003E \u003Cbr /\u003EThe hole must be a through hole. \u003Cbr /\u003EThe plug is applied by being pulled into the hole. The narrow end of the plug is placed into the hole, and then the operator uses the narrower end to pull the larger end through the hole. As the plug is pulled the larger diameter stretches and becomes smaller, allowing the plug to fit through the hole. Once the grounding diameter is tight against the face of the area to be masked, the plug is released. The plug then forms a tight seal on the hole and the grounding area. \u003Cbr /\u003EOne end of the plug is similar in design to a pull plug, whilst the area above the grounding diameter can be used as a handle to remove the plug.\u003C/p\u003E\u003Cp\u003E\u003Cstrong\u003ERecommended for\u003C/strong\u003E \u003Cbr /\u003EPowder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range \u003Cbr /\u003EMaximum temperature 600 ºF (315 ºC) Design Features\u003C/p\u003E\u003Cul\u003E\u003Cli\u003E\u003Cb\u003EDual purpose\u003C/b\u003E - In addition to masking a components grounding area, the plug can be pulled into holes that are counter sunk to mask off the faces of the countersink\u003C/li\u003E\u003Cli\u003E\u003Cb\u003ETwo stage\u003C/b\u003E - The large and small diameters help with insertion\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EHandle\u003C/b\u003E - The handle area above the grounding diameter helps with removal\u003C/li\u003E\u003Cli\u003E\u003Cb\u003ESizes\u003C/b\u003E - This series offers sizes specifically designed for metric threaded holes\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EVisible\u003C/b\u003E - The handle area above the grounding diameter makes the plug easier to see on the component\u003C/li\u003E\u003Cli\u003E\u003Cb\u003ELabor saving\u003C/b\u003E - The washer design eliminates the need for two-stage masking\u003C/li\u003E\u003Cli\u003E\u003Cb\u003ETight fit\u003C/b\u003E - The grounding diameter can be pulled down onto the area to be masked\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EReusable\u003C/b\u003E - The plugs are reusable depending on the application\u003C/li\u003E\u003Cli\u003E\u003Cb\u003EColor code", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|F (in)|F (mm)|Colour|Packaging -Bag[Packaging - Bag]", "grpflg": "Y" }, { "clsnam": "1523", "clsnbr": "11010708", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Tapes, Wraps, Discs", "catnm5": "", "imgnme": "lg_caplugs_mdk-series_01.jpg", "notes": "\u003CP\u003EWhen it comes to tape, you want to choose a material that can: Survive the coating process, Be cleanly removed after coating process. Tapes can be quickly die-cut to: speed up their application, Eliminating the need for razors. High temp tape for powder coating, e-coating and other high temp applications (polyester). Proper tape selection will insure the best coverage and can reduce unnecessary cost. \u003CBR\u003E\u003C/P\u003E¶\u003CP\u003EA Caplugs/Shercon Product line.\u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "2152", "clsnbr": "1101070801", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Tapes, Wraps, Discs", "catnm5": "KD11-SH Series", "imgnme": "dmr-caplugs-masking-kd11-tape-300f.jpg", "notes": "\u003CP\u003EKD11 Crepe Paper Tape\u003CSTRONG\u003E -\u003C/STRONG\u003E \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EPurpose\u003C/STRONG\u003E \u003CBR\u003EKD11 is a high temperature, pressure sensitive masking tape designed for clean removal. It performs well in wet strip applications and can be stripped hot. It has a fine structured smooth crepe backing with high strength and good conformability to curved surfaces. It provides both resistance to paint flaking and a clean well-defined masking line.\u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003ESpray painting \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 300 ºF (149 ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability\u003C/STRONG\u003E \u003CBR\u003EAvailable in roll form in a range of imperial and metric widths. This tape is also available pre-cut as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003EDiscs\u003C/LI\u003E¶\u003CLI\u003ERectangles\u003C/LI\u003E ¶\u003CLI\u003ESquares\u003C/LI\u003E ¶\u003CLI\u003EDonuts\u003C/LI\u003E ¶\u003CLI\u003ECustom Die Cut Shapes\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "Width-Decimal (in)|Width-Decimal (mm)|Length per Roll (YD)|Length per Roll (M)|Colour|Packaging - Roll[Rolls per Case]", "grpflg": "Y" }, { "clsnam": "2154", "clsnbr": "1101070802", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Tapes, Wraps, Discs", "catnm5": "PC11-SH Series", "imgnme": "dmr-caplugs-masking-pc11-red-pc90-blue-tapes.jpg", "notes": "\u003CP\u003ERed Polyester Tapes - \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EDescription\u003C/STRONG\u003E \u003CBR\u003EPC11 is a high temperature film tape used to mask off areas that do not require coating. It has a silicone adhesive with excellent release properties that will not leave an adhesive residue. PC11 has a higher temperature range than other Polyester tapes.\u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003EPowder coating, E-coating, Anodizing \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 425 ºF (220 ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability\u003C/STRONG\u003E \u003CBR\u003EAvailable in roll form in a range of imperial and metric widths. \u003CBR\u003EThis tape is also available as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003EPre-cut Discs\u003C/LI\u003E ¶\u003CLI\u003ERectangles\u003C/LI\u003E ¶\u003CLI\u003ESquares\u003C/LI\u003E ¶\u003CLI\u003EDonuts\u003C/LI\u003E ¶\u003CLI\u003ECustom Die Cut Shapes\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "Width-Decimal (in)|Width-Decimal (mm)|Length per Roll (YD)|Length per Roll (M)|Colour|Packaging - Roll[Rolls per Case]", "grpflg": "Y" }, { "clsnam": "2156", "clsnbr": "1101070803", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Tapes, Wraps, Discs", "catnm5": "PC198-SH Series", "imgnme": "dmr-caplugs-masking-glass-cloth-tape-500f.jpg", "notes": "\u003CP\u003EGlass Cloth Tape - \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EDescription \u003CBR\u003E\u003C/STRONG\u003EPC198 is a high temperature tape used to mask off areas that do not require coating or blasting. It has a silicone adhesive with excellent release properties that will not leave an adhesive residue. This tape offers optimum performance in powder coating, blasting/stenciling or electrical insulation applications. It has excellent tensile strength, good temperature resistance, excellent edge tear resistance, superior conformability and is flame resistant. It can be used in the electrical industries for insulating coil connections and cable harness wrapping. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003EHigh temperature Powder coating, Thermal spraying, Blasting \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 500 ºF (260 ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability\u003C/STRONG\u003E \u003CBR\u003EAvailable in roll form in a range of imperial and metric widths. \u003CBR\u003EThis tape is also available as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003EPre-cut Discs\u003C/LI\u003E¶\u003CLI\u003ERectangles\u003C/LI\u003E ¶\u003CLI\u003ESquares\u003C/LI\u003E ¶\u003CLI\u003EDonuts\u003C/LI\u003E ¶\u003CLI\u003ECustom Die Cut Shapes\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received", "grpatr": "Width-Decimal (in)|Width-Decimal (mm)|Length per Roll (YD)|Length per Roll (M)|Colour|Packaging - Roll[Rolls per Case]", "grpflg": "Y" }, { "clsnam": "2158", "clsnbr": "1101070804", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Tapes, Wraps, Discs", "catnm5": "PC21-SH Series", "imgnme": "dmr-caplugs-masking-pc21-green-tape-400f.jpg", "notes": "\u003CP\u003EPC21 - Green Polyester Tape - \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EDescription \u003C/STRONG\u003E\u003CBR\u003EPC21 is a high temperature film tape used to mask off areas that do not require coating. It has a silicone adhesive with excellent release properties that will not leave an adhesive residue. \u003C/P\u003E¶\u003CP\u003ERecommended for \u003CBR\u003EPowder coating, E-coating, Anodizing \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 400 ºF (204 ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability\u003C/STRONG\u003E \u003CBR\u003EAvailable in roll form in a range of imperial and metric widths. \u003CBR\u003EThis tape is also available as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003EPre-cut discs\u003C/LI\u003E¶\u003CLI\u003ERectangles\u003C/LI\u003E ¶\u003CLI\u003ESquares\u003C/LI\u003E ¶\u003CLI\u003EDonuts\u003C/LI\u003E ¶\u003CLI\u003ECustom Die Cut Shapes\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "Width-Decimal (in)|Width-Decimal (mm)|Length per Roll (YD)|Length per Roll (M)|Colour|Packaging - Roll[Rolls per Case]", "grpflg": "Y" }, { "clsnam": "2160", "clsnbr": "1101070805", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Tapes, Wraps, Discs", "catnm5": "PC30-SH Series", "imgnme": "dmr-caplugs-masking-pc30-yellow-tape-400f.jpg", "notes": "\u003CP\u003EYellow Polyester Tapes \u003CSTRONG\u003E-\u003C/STRONG\u003E \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EDescription\u003C/STRONG\u003E \u003CBR\u003EPC30 is a high temperature film tape used to mask off areas that do not require coating. It has a silicone adhesive with excellent release properties that will not leave an adhesive residue. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003EPowder coating, E-coating, Anodizing \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range \u003CBR\u003E\u003C/STRONG\u003EMaximum temperature 400 ºF (204 ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability\u003C/STRONG\u003E \u003CBR\u003EAvailable in roll form in a range of imperial and metric widths. \u003CBR\u003EThis tape is also available as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003EPre-cut Discs\u003C/LI\u003E¶\u003CLI\u003ERectangles\u003C/LI\u003E ¶\u003CLI\u003ESquares\u003C/LI\u003E ¶\u003CLI\u003EDonuts\u003C/LI\u003E ¶\u003CLI\u003ECustom Die Cut Shapes\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "Width-Decimal (in)|Width-Decimal (mm)|Length per Roll (YD)|Length per Roll (M)|Colour|Packaging - Roll[Rolls per Case]", "grpflg": "Y" }, { "clsnam": "2162", "clsnbr": "1101070806", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Tapes, Wraps, Discs", "catnm5": "PC90-SH Series", "imgnme": "dmr-caplugs-masking-pc11-red-pc90-blue-tapes.jpg", "notes": "\u003CP\u003EBlue Polyester Tapes - \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EDescription\u003C/STRONG\u003E \u003CBR\u003EPC90 is a high temperature film tape used to mask off areas that do not require coating. It has a silicone adhesive with excellent release properties that will not leave an adhesive residue. PC90 is a thinner tape and as such is suited for use on curved surfaces or profiles. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003EPowder coating, E-coating, Anodizing \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E \u003CBR\u003EMaximum temperature 400 ºF (204 ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability\u003C/STRONG\u003E \u003CBR\u003EAvailable in roll form in a range of imperial and metric widths. \u003CBR\u003EThis tape is also available as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003EPre-cut Discs\u003C/LI\u003E¶\u003CLI\u003ERectangles\u003C/LI\u003E ¶\u003CLI\u003ESquares\u003C/LI\u003E ¶\u003CLI\u003EDonuts\u003C/LI\u003E ¶\u003CLI\u003ECustom Die Cut Shapes\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "Width-Decimal (in)|Width-Decimal (mm)|Length per Roll (YD)|Length per Roll (M)|Colour|Packaging - Roll[Rolls per Case]", "grpflg": "Y" }, { "clsnam": "2164", "clsnbr": "1101070807", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Tapes, Wraps, Discs", "catnm5": "SRT-SH Series", "imgnme": "dmr-caplugs-masking-silicone-rubber-tape-600f.jpg", "notes": "\u003CP\u003ESilicone Rubber Tape - \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EDescription\u003C/STRONG\u003E \u003CBR\u003EThis tape is a wrapping tape it does not have an adhesive, but can bond to itself as it is wrapped around items. It will mask off the ends or sections of shafts and tubes. SRT tape can also be used to form a tough resilient void free insulation. SRT is contoured so that as it is spiraled around and along, it forms a consistent thick layer of tape.\u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E \u003CBR\u003EPowder coating, E-coating, Plating, Anodizing \u005C\u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range \u003CBR\u003E\u003C/STRONG\u003EMaximum temperature 600 ºF (315 ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability\u003C/STRONG\u003E \u003CBR\u003EAvailable in roll form in a range of widths and thicknesses. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.\u003C/P\u003E", "grpatr": "Width-Fraction (in)[Roll Width]|Thickness[Thickness]|Length per Roll (ft)[Length per Roll]|Colour", "grpflg": "Y" }, { "clsnam": "2150", "clsnbr": "1101070808", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Masking", "catnm4": "Tapes, Wraps, Discs", "catnm5": "22-SH Series", "imgnme": "dmr-caplugs-masking-polyimide-tape-500f.jpg", "notes": "\u003CP\u003EPolyimide Tapes - \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EDescription\u003C/STRONG\u003E\u003C/P\u003E¶\u003CP\u003E# 22 Polyimide tape is high temperature film tape used for electrical and thermal insulation. It is also used to mask the Gold fingers on circuit boards during wave soldering. The silicone adhesive means the tape has excellent release properties. \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ERecommended for\u003C/STRONG\u003E\u003C/P\u003E¶\u003CP\u003EElectrical insulation, Wave soldering, Masking of circuit boards \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003ETemperature Range\u003C/STRONG\u003E\u003C/P\u003E¶\u003CP\u003EMaximum temperature 500 ºF (260 ºC) \u003C/P\u003E¶\u003CP\u003E\u003CSTRONG\u003EAvailability\u003C/STRONG\u003E \u003CBR\u003EAvailable in roll form in a range of imperial and metric widths. \u003CBR\u003EThis tape is also available as: \u003C/P\u003E¶\u003CUL\u003E¶\u003CLI\u003EPre-cut Discs\u003C/LI\u003E¶\u003CLI\u003ERectangles\u003C/LI\u003E ¶\u003CLI\u003ESquares\u003C/LI\u003E ¶\u003CLI\u003EDonuts\u003C/LI\u003E ¶\u003CLI\u003ECustom Die Cut Shapes\u003C/LI\u003E\u003C/UL\u003E\u003CSTRONG\u003EStorage conditions\u003C/STRONG\u003E \u003CBR\u003EItems should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.", "grpatr": "Width-Decimal (in)|Width-Decimal (mm)|Length per Roll (YD)|Length per Roll (M)|Colour|Packaging - Roll[Rolls per Case]", "grpflg": "Y" }, { "clsnam": "2311", "clsnbr": "110108", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Medical", "catnm4": "", "catnm5": "", "imgnme": "MCN_Y005_silo.jpg", "notes": "\u003Cspan style=\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003E Caplugs has the medical device components you\u0027re looking for. We are the only true national plastic molder of protective and functional parts for both medical devices and equipment. Caplugs is proud to be the molding partner for 25 of the top 30 medical device manufacturers. If one of our standard parts can\u0027t meet your requirements, our experienced in-house team of engineers will work with you to design exactly what you need.\u003C/span\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "2319", "clsnbr": "11010801", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Medical", "catnm4": "EVC Series", "catnm5": "", "imgnme": "EVCSeries_silo.jpg|EVCSeries_group.jpg", "notes": "\u003Cp style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003EEVC series caps are designed to protect medical tubing and fittings. Allows for natural ventilation; preventing pressure build-up and accidental \u0022pop up\u0022. These resilient caps are made of a medical grade elastomer.\u003C/p\u003E\u003Cul style=\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003E\u003Cli style=\u0022box-sizing: border-box;\u0022\u003EErgonomic design makes it easy to install and remove.\u003C/li\u003E\u003Cli style=\u0022box-sizing: border-box;\u0022\u003EThe soft material and internal ribs cushion delicate medical fittings preventing impact damage and contamination.\u003C/li\u003E\u003Cli style=\u0022box-sizing: border-box;\u0022\u003EAlso available in low density polyethylene for industrial use on metal tubing and fittings.\u003C/li\u003E\u003C/ul\u003E\u003Cspan style=\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003EThe parts listed below are manufactured in a medical grade elastomer. For information and pricing on these parts in low density polyethylene (LDPE) material, please contact a Customer Service Representative.\u003C/span\u003E\u003Cp style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing", "grpatr": "Colour|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|F (in)|F (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "2322", "clsnbr": "11010802", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Medical", "catnm4": "MCN-TCP Series", "catnm5": "", "imgnme": "MCN_TCPSeries_silo.jpg|MCN_TCPSeries_group.jpg", "notes": "\u003Cp style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003EMCN-TCP Series tethered caps protect tubes and ports from contamination, fitting popular 1/4\u0022 and 3/8\u0022 sizes. A tether keeps the cap in place when not in use. Caps provide easy removal and reapplication when draining fluid. \u003C/p\u003E\u003Cul style=\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003E\u003Cli style=\u0022box-sizing: border-box;\u0022\u003ERibs on cap allow for easy grasping and removal\u003C/li\u003E\u003Cli style=\u0022box-sizing: border-box;\u0022\u003EAdditional colors available\u003C/li\u003E\u003Cli style=\u0022box-sizing: border-box;\u0022\u003ETethered caps also available in silicone (MCN-TCS Series) or vinyl (MCN-TCV Series)\u003C/li\u003E\u003C/ul\u003E\u003Cstrong style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: bold 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003EMaterial:\u003C/strong\u003E\u003Cspan style=\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003E\u003Cspan class=\u0022Apple-converted-space\u0022\u003E \u003C/span\u003ELow-density polyethylene\u003C/span\u003E\u003Cbr style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027", "grpatr": "Description|Colour|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "2320", "clsnbr": "11010803", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Medical", "catnm4": "MCN-TCS Series", "catnm5": "", "imgnme": "MCN_TCS_Series_silo.jpg|MCN_TCS_Series_group.jpg", "notes": "\u003Cspan style=\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003EMCN-TCS Series caps protect tubes and ports from contamination, fitting popular 1/4\u0022 and 3/8\u0022 sizes. A tether keeps the cap in place when not in use. Caps provide easy removal and reapplication when draining fluid. \u003C/span\u003E\u003Cul style=\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003E\u003Cli style=\u0022box-sizing: border-box;\u0022\u003EUSP class VI silicone\u003C/li\u003E\u003Cli style=\u0022box-sizing: border-box;\u0022\u003EMeets a variety of applications\u003C/li\u003E\u003Cli style=\u0022box-sizing: border-box;\u0022\u003EAdditional colors available\u003C/li\u003E\u003C/ul\u003E\u003Cstrong style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: bold 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003EMaterial:\u003C/strong\u003E\u003Cspan style=\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003E\u003Cspan class=\u0022Apple-converted-space\u0022\u003E \u003C/span\u003ESilicone\u003C/span\u003E\u003Cbr style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #f", "grpatr": "Description|Colour|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "2321", "clsnbr": "11010804", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Medical", "catnm4": "MCN-TCV Series", "catnm5": "", "imgnme": "MCNTCVSeries_silo.jpg|MCN_TCVSeries_group.jpg", "notes": "\u003Cspan style=\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003EMCN-TCV series caps protect tubes and ports from contamination, fitting popular 1/4\u0022 and 3/8\u0022 sizes. A tether keeps the cap in place when not in use. These vinyl caps provide easy removal and reapplication when draining fluid with a bulb design.\u003C/span\u003E\u003Cul id=\u0022mf336\u0022 style=\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003E\u003Cli id=\u0022mf337\u0022 style=\u0022box-sizing: border-box;\u0022\u003EMeets a variety of applications\u003C/li\u003E\u003Cli id=\u0022mf338\u0022 style=\u0022box-sizing: border-box;\u0022\u003EAdditional colors available\u003C/li\u003E\u003Cli id=\u0022mf339\u0022 style=\u0022box-sizing: border-box;\u0022\u003EAlso available in plastic (MCN-TCP series) and silicone (MCN-TCS series)\u003C/li\u003E\u003C/ul\u003E\u003Cp id=\u0022mf340\u0022 style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003E\u003Cstrong style=\u0022box-sizing: border-box; font-weight: bold;\u0022\u003EMaterial:\u003C/strong\u003E\u003Cspan class=\u0022Apple-converted-space\u0022\u003E \u003C/span\u003EVinyl\u003Cbr id=\u0022mf341\u0022 style=\u0022box-sizing: border-box;\u0022 /\u003E\u003Cstrong style=\u0022box-sizing: border-box; font-weight: bold;\u0022\u003EColor:\u003C/strong\u003E\u003Cspan class=\u0022Apple-converted-space\u0022\u003E \u003C/span\u003EBlue\u003C/p\u003E", "grpatr": "Description|Colour|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "2020", "clsnbr": "110109", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Oilfiled Thread Protectors", "catnm4": "", "catnm5": "", "imgnme": "DMR_OilFieldThreadProtection_Grouped_300x300.jpg", "notes": "The thread protectors are available for Tubing (EUE, NUE), Casing (BTC, LTC, STC) and Tool Joint (REG, IF, FH, XH) sizes and in 4 quality grades. The grades range from Economical (providing protection from environmental elements and is ideal for short-term storage and for API applications) through to Extremely Heavy Duty (reliable thread impact protection and sealing abilities for long-term storage and handling requirements). Our thread protectors meet the API-5CT standard.¶¶Material:¶Our thread protectors feature high-performance API,premium,andcustom thread protection for a¶complete range of OCTG applications. Materials range from proprietary resins to engineering-grade thermoplastics and polymer alloys.", "grpatr": "", "grpflg": "N" }, { "clsnam": "2022", "clsnbr": "11010901", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Oilfiled Thread Protectors", "catnm4": "Casing Series", "catnm5": "", "imgnme": "DMR_OilFieldThreadProtection_CasingSeriesGroup_300x300.jpg", "notes": "The thread protectors are available for Tubing (EUE, NUE), Casing (BTC, LTC, STC) and Tool Joint (REG, IF, FH, XH) sizes and in 4 quality grades. The grades range from Economical (providing protection from environmental elements and is ideal for short-term storage and for API applications) through to Extremely Heavy Duty (reliable thread impact protection and sealing abilities for long-term storage and handling requirements). Our thread protectors meet the API-5CT standard.¶¶Material:¶Our thread protectors feature high-performance API,premium,andcustom thread protection for a¶complete range of OCTG applications. Materials range from proprietary resins to engineering-grade thermoplastics and polymer alloys.", "grpatr": "Connection Size|Connection|Pin/Box", "grpflg": "Y" }, { "clsnam": "2021", "clsnbr": "11010902", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Oilfiled Thread Protectors", "catnm4": "Tubing Series", "catnm5": "", "imgnme": "DMR_OilFieldThreadProtection_Grouped_300x300.jpg", "notes": "The thread protectors are available for Tubing (EUE, NUE), Casing (BTC, LTC, STC) and Tool Joint (REG, IF, FH, XH) sizes and in 4 quality grades. The grades range from Economical (providing protection from environmental elements and is ideal for short-term storage and for API applications) through to Extremely Heavy Duty (reliable thread impact protection and sealing abilities for long-term storage and handling requirements). Our thread protectors meet the API-5CT standard.¶¶Material:¶Our thread protectors feature high-performance API,premium,andcustom thread protection for a¶complete range of OCTG applications. Materials range from proprietary resins to engineering-grade thermoplastics and polymer alloys.", "grpatr": "Connection Size|Connection|Pin/Box", "grpflg": "Y" }, { "clsnam": "1250", "clsnbr": "110110", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "", "catnm5": "", "imgnme": "lg_caplugs_fc-series_01.jpg", "notes": "\u003CSPAN class=body\u003EA full line of injection-molded, dip-molded, extruded and die-cut products to protect your flange surfaces. Each flange cover offers superior protection of the flange and is designed to be easily installed and removed. Protect your flange surfaces from damage, dust, moisture and foreign particles with one of our economical flange covers.\u003C/SPAN\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1590", "clsnbr": "11011001", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "", "imgnme": "lg_caplugs_epn240-series_01.jpg", "notes": "Caplugs has a full line of injection-molded, dip-molded, extruded and die-cut products to protect your flange surfaces. Each flange cover offers superior protection of the flange and is designed to be easily installed and removed. Protect your flange surfaces from damage, dust, moisture and foreign particles with one of our economical flange covers.¶¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1675", "clsnbr": "1101100101", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "American Standard Cap Series", "imgnme": "sm_americanstandard_series_silo-150.jpg", "notes": "These caps are designed to fit ASTM-A 120 standard schedule 40 pipe. These caps will protect the longer threads associated with piping used in water wells for irrigation. An interrupted bead assures the cap is locked in place. ¶¶Material: Low-Density Polyethylene¶Colour: Orange", "grpatr": "To Cap NPT Size|A (in)|A (mm)|C (in)|C (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1676", "clsnbr": "1101100102", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "CC Series", "imgnme": "sm_cc_series_silo-150.jpg", "notes": "The CC Series is specially designed to cover air craft engine intake manifolds. The CC Series is designed to cover standard and low profile sheet metal an machined flanges. These covers help to keep out dirt and dust during maintenance, repair and new construction. ¶¶Material: Low Density Polyethylene¶Standard Color: Yellow¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1677", "clsnbr": "1101100103", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "CE Series", "imgnme": "sm_ce_series_silo-150.jpg", "notes": "Caplugs is excited to offer a new patent pending pipe cap design. This design was developed to make installation quick and easy. The skirt of the cap was designed with ribs that create an elasticity allowing the cap to be easily pushed onto the pipe end. The number and size of the ribs makes certain it will retain its shape and adhere to the pipe end. These caps have the durability of traditional pipe caps with an elasticity that ensures they will stay on the pipe until you intentionally remove it. This new design is available in the industry\u0027s most common sizes under the following Caplugs part numbers:¶¶CE-16¶CE-18¶CE-20¶CE-24¶¶¶Traditional Caplugs CE/PC Series Pipe Caps - These heavy wall polyethylene caps offer protection for threaded pipe ends. The added length of the CE series caps provide a positive seal on the pipe surface beyond last thread. Desgined to secure NPT threads from damage and contamination during transit, handling and storage. CE series are easy to install and remove.¶¶Note: Niagara CE Series and Caplugs PC Series have been combined into the CE/PC Series.¶¶Material: Low-Density Polyethylene¶Color: See chart¶¶", "grpatr": "Colour|To Fit Thread Size|A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "2208", "clsnbr": "1101100104", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "CLT Series -Standard Duty Well Casing", "imgnme": "CLTSeries_silo.jpg|CLTSeries_main.jpg|CLTSeries_drawing_ThickerLines.jpg", "notes": "New Patent-Pending Standard Duty Well Casing Thread Protectors are designed to protect the exposed well casing pin ends while in transit or storage. The unique and innovative design allow the protectors to be installed as a push-on (non-threaded) cap, with a tear ring and rail removal feature adhering to API standard duty requirements.\u003Cbr /\u003EThe CLT Series\u0027 innovative design features will save time and resources with installation and removal.¶\u003Cul\u003E¶\u003Cli\u003EPatent Pending Design - no other like it in the industry\u003C/li\u003E¶\u003Cli\u003EEasy installation - does not need to be threaded on. Can be seated using a rubber mallet. Slides over pipe dope, locks into threads. Tapered end allows casing to slide up and over each other when loading or unloading from a stack.\u003C/li\u003E¶\u003Cli\u003EEasy to remove at the drill site. No tools required for removal. Simply pull the tear ring and remove the protector.\u003C/li\u003E¶\u003Cli\u003EDesigned and tested for Impact resistance, Temperature Extremes, Salt spray corrosion and Vibration.\u003C/li\u003E¶\u003Cli\u003ERecyclable polyethylene\u003C/li\u003E¶\u003Cli\u003EStandard Duty Long and Short Well Casing\u003C/li\u003E¶\u003Cli\u003ERange of sizes: 4 1/2\u0022 thru 9 5/8\u0022\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp\u003EMaterial: PE-LLD\u003C/p\u003E", "grpatr": "To Fit Casing (in)|Thread Type|API Class|Packaging - Carton Quantity[Carton Qty]|Standard Colour", "grpflg": "Y" }, { "clsnam": "2209", "clsnbr": "1101100105", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "CST Series -Short Thread Well Casing", "imgnme": "CLTSeries_silo.jpg|CLTSeries_main.jpg|CLTSeries_drawing_ThickerLines.jpg", "notes": "\u003Cp\u003ENew Patent-Pending Standard Duty Well Casing Thread Protectors are designed to protect the exposed well casing pin ends while in transit or storage. The unique and innovative design allow the protectors to be installed as a push-on (non-threaded) cap, with a tear ring and rail removal feature adhering to API standard duty requirements.\u003Cbr /\u003EThe CLT \u0026 CST Series\u0027 innovative design features will save time and resources with installation and removal.\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003EPatent Pending Design - no other like it in the industry\u003C/li\u003E¶\u003Cli\u003EEasy installation - does not need to be threaded on. Can be seated using a rubber mallet. Slides over pipe dope, locks into threads. Tapered end allows casing to slide up and over each other when loading or unloading from a stack.\u003C/li\u003E¶\u003Cli\u003EEasy to remove at the drill site. No tools required for removal. Simply pull the tear ring and remove the protector.\u003C/li\u003E¶\u003Cli\u003EDesigned and tested for Impact resistance, Temperature Extremes, Salt spray corrosion and Vibration.\u003C/li\u003E¶\u003Cli\u003ERecyclable polyethylene\u003C/li\u003E¶\u003Cli\u003EStandard Duty Long and Short Well Casing\u003C/li\u003E¶\u003Cli\u003ERange of sizes: 4 1/2\u0022\u0022 thru 9 5/8\u0022\u003C/li\u003E¶\u003C/ul\u003E¶Material: PE-LLD\u003Cbr /\u003E¶\u003Cp\u003E\u003C/p\u003E", "grpatr": "To Fit Casing (in)|Thread Type|API Class|Packaging - Carton Quantity[Carton Qty]|Standard Colour", "grpflg": "Y" }, { "clsnam": "1678", "clsnbr": "1101100106", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "EPN-240 Series", "imgnme": "sm_epn240_series_silo-150.jpg", "notes": "Specifically designed to accommodate a crane hook for ease of mobility. These caps are durable with a hooking device for dryer bags, making them ideal for use in any pipe yard. ¶Material: Low-Density Polyethylene Colour: Black¶", "grpatr": "Nominal Pipe Size|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1679", "clsnbr": "1101100107", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "EPN-250 Series", "imgnme": "sm_epn250_series_silo-150.jpg", "notes": "These caps were designed to cradle delicate beveled edge pipe ends. These durable caps are easy to install and remain securely on the pipe end until intentionally removed.¶¶Material: Low-Density Polyethylene Colour: Orange¶¶", "grpatr": "Nominal Pipe Size|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1680", "clsnbr": "1101100108", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "FF series", "imgnme": "sm_ff_series_silo-150.jpg", "notes": "Available in square, hexagonal and triangular shapes, Series FF can be used with a variety of flanged and flange-mounted fittings. They effectively seal dirt out of the fitting and protect the flange surface against nicks and scratches. When fittings are provided with slip-on flanges, Series FF Caps keep the assemblies intact during handling and shipping.¶¶Material: Low-Density Polyethylene¶Color: Red¶¶", "grpatr": "Shape|To Fit|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "2215", "clsnbr": "1101100109", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "FHU Series - Thread Protection", "imgnme": "FHUSeries_silo.jpg|FHUSeries_silo.jpg", "notes": "Hammer Union/ Pup Joint Thread Protection", "grpatr": "Figure|Working Pressure|To Fit Nominal Pipe Size|Thread Type|Packaging - Carton Quantity|Standard Colour", "grpflg": "Y" }, { "clsnam": "2302", "clsnbr": "1101100110", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "FPC Series", "imgnme": "FPCSeries_silo.jpg|FPCSeries_group.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EThe FPC series can be manufactured in one week to fit any size up to 60\u0022\u0022 (including fractional inches). Made of a high-density polyethylene top with flexible \u003Cbr /\u003Elow-density polyethylene skirt for simple attachment.\u003C/p\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EEconomical alternative to cumbersome two-piece cap\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EAny size up to 60\u0022\u0022\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EGreat for odd sizes\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EHigh-density polytheylene (disk) and low-density polyethylene (skirt)\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EBlack\u003C/p\u003E", "grpatr": "Pipe Size (in)|A (in)|B (in)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1681", "clsnbr": "1101100111", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "FPN Series", "imgnme": "sm_fpn_series_silo-150.jpg", "notes": "These heavy-duty plugs protect sucker-rod couplings, but have a versatile design that is ideal for a wide range of applications where a greater degree of protection is necessary.¶¶Material: Low-Density Polyethylene¶¶Color: Black¶", "grpatr": "To Cap Rod Size|A (in)|A (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1682", "clsnbr": "1101100112", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "HSF Series", "imgnme": "sm_hsf_series_silo-150.jpg", "notes": "Series HSF Caps and Covers are designed to protect four-bolt split-flange connections. Series SF Caps push on easily and fit securely with an internal bead providing a positive locking grip. Inasmuch as the SF Cap is made of natural, translucent polyethylene, the O-ring remains visible even after the closure is applied.¶¶Material: Low-Density Polyethylene¶Color: Natural¶¶", "grpatr": "To Cap Nominal Flange Size|A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "2214", "clsnbr": "1101100113", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "HU Series - Hammer Union Protection", "imgnme": "HUSeries_silo.jpg|HUSeries_main.jpg|HU-Series_drawing-300x300.jpg", "notes": "\u003Cp\u003EAfter extensive research in the field, Caplugs has developed innovative part designs that not only protect your threads, but are easier to install and remove.\u003C/p\u003E\u003Cp\u003ECaplugs HU Series parts are designed to protect the machined threads and sealing surfaces of Hammer Union Joint connections. The wing nut together with the male and female subs form the connection. Typically used for temporary pipe and flow line installations, Hammer Unions (aka- Wing Unions) are commonly found at well rig sites in the oil \u0026 gas industry. They are also used in chemical plants, vacuum trucks, pump trucks and marine dredging equipment.\u003C/p\u003E\u003Cp\u003EThey are manufactured of a material that offers a high level of durability and impact resistance, but at a more economical cost than traditional covers. Designed to be installed and removed more quickly than standard hammer union covers, saving you valuable time in the field.\u003C/p\u003E\u003Cp\u003EFeatures include:\u003C/p\u003E\u003Cul\u003E\u003Cli\u003EMade of high durometer vinyl\u003C/li\u003E\u003Cli\u003EPatent pending design\u003C/li\u003E\u003Cli\u003EErgonomic handle design also allows for stacking\u003C/li\u003E\u003Cli\u003ENo tools required for removal\u003C/li\u003E\u003Cli\u003EColor Coded for easy identification\u003C/li\u003E\u003C/ul\u003E\u003Cp\u003E** HU-206 parts will fit FIG\u0027s 200/206/207\u003C/p\u003E", "grpatr": "Figure|Working Pressure|To Fit Nominal Pipe Size|Thread Type|Packaging - Carton Quantity|Standard Colour", "grpflg": "Y" }, { "clsnam": "2210", "clsnbr": "1101100114", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "NUO Series-Standard Duty Non-Upset End Tubing", "imgnme": "NUOSeries_silo_500x500.jpg|NUOSeries_main_500x484.jpg|NUOSeries_drawing_800x800.jpg", "notes": "The Standard Duty Non-Upset End Tubing, NUO Series, protect exposed tubing pin ends. Easily installed and removed with non-threaded, push-on design and a tear ring, adhering to API standard duty requirements. Made with recyclable polyethylene", "grpatr": "API Class|Packaging - Carton Quantity|Standard Colour|To Fit NUE Casing (in)", "grpflg": "Y" }, { "clsnam": "1683", "clsnbr": "1101100115", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "OE Series", "imgnme": "sm_oe_series_silo-150.jpg", "notes": "The OE Series is designed to protect threaded pipe conduit during transit. A locking bead ensures that the cap fits snugly on and stays intact until it is intentionally removed.¶¶Material: Low-Density Polyethylene¶Color: See chart. IMC colors also available¶", "grpatr": "Nominal Pipe Size|Colour|A (in)|A (mm)|C (in)|C (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "2212", "clsnbr": "1101100116", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "PSR Series - Polished Sucker Rod Caps", "imgnme": "PSRSeries_silo.jpg|PSRSeries_drawing_small.jpg|PSRSeries_main.jpg", "notes": "The PSR Series polished sucker rod protectors provide excellent impact protection for high grade, polished stainless steel. The protectors screw on the threaded ends for maximum retention and easy removal with socket tools or wrenches. Made of high-density polyethylene and color coded by size.", "grpatr": "To Cap Rod Size (in)|Packaging - Carton Quantity|Packaging - Mini Quantity|Standard Colour", "grpflg": "Y" }, { "clsnam": "1684", "clsnbr": "1101100117", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "PVCP Series", "imgnme": "sm_pvcp_series_silo-150.jpg", "notes": "Straight wall plugs designed to fit into plastic pipe conduit used in construction. This piping is commonly used as conduit between floors of a structure. The piping needs to be sealed to ensure it doesn\u0027t fill with concrete. The PVCP series fits securely into the pipe to ensure it remains protected throughout the building process.¶¶Material: Low-Density Polyethylene¶Color: Red¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1685", "clsnbr": "1101100118", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "SF Series", "imgnme": "sm_sf_series_silo-150.jpg", "notes": "Series SF Caps and Covers are designed to protect four-bolt split-flange connections. Series SF Caps push on easily and fit securely with an internal bead providing a positive locking grip. Inasmuch as the SF Cap is made of natural, translucent polyethylene, the O-ring remains visible even after the closure is applied.¶¶Material: Low-Density Polyethylene¶Color: Natural¶¶", "grpatr": "To Cap Nominal Flange Size|To Cap Ferrule Size|A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1686", "clsnbr": "1101100119", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "SFP Series", "imgnme": "sm_sfp_series_silo-150.jpg", "notes": "Series SFP Covers are designed for use on SAE 3000 lb, four-bolt, split hydraulic flanges. The SFP cover protects the port and fits snugly and firmly into the opening with an integral surrounding apron protecting the flange surface.¶¶Material: Low-Density Polyethylene¶Color: Red¶¶", "grpatr": "To Cover Flange Dash Size|To Fit Dim Flange Size|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1687", "clsnbr": "1101100120", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "SR Series", "imgnme": "sm_sr_series_silo-150.jpg", "notes": "These heavy-duty caps were designed to protect sucker-rod pin ends. The vertical internal ribs act as shock absorbers. These inexpensive caps will protect sucker rods during shipment or in-house processing.¶¶Material: Low-Density Polyethylene¶Color: Black¶", "grpatr": "To Cap Rod Size|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "2213", "clsnbr": "1101100121", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "SSR Series - Standard Sucker Rod Protection", "imgnme": "SSRSeries_silo.jpg|SSRSeries_drawing_small.jpg|SSRSeries_main.jpg", "notes": "\u003Cspan id=\u0022ctl00_cpholder_ctl00_lDescription\u0022\u003EStandard Sucker Rod Protection\u003Cbr /\u003E\u003C/span\u003E\u003Cbr /\u003ESSR Series sucker rod protectors feature a non-threaded design and provide excellent impact security. The protectors are easily removed with socket tools or wrenches. Made of high-density polyethylene.", "grpatr": "To Cap Rod Size (in)|Packaging - Carton Quantity|Packaging - Mini Quantity|Standard Colour", "grpflg": "Y" }, { "clsnam": "2211", "clsnbr": "1101100122", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "UEO Series -Tubing Thread Protection Grip It \u0026 Rip", "imgnme": "UEOSeries_silo_500x500.jpg|UEOSeries_main_500x417.jpg|UEOSeries_drawing_800x800.jpg", "notes": "\u003Cp\u003EStandard duty tubing thread protectors are designed to protect exposed tubing pin ends while in transit or storage. The innovative design allows the protectors to be installed as a push-on (non-threaded) cap, with a tear ring and rail removal feature, adhering to API standard duty requirements. The UEO Series will save time and resources with installation and removal. \u003Cbr /\u003E\u003Cem\u003EGrip It \u0026 Rip It\u003C/em\u003E\u003C/p\u003E¶\u003Cul\u003E¶\u003Cli\u003EDesigned and tested for impact resistanve, temperature extremes, salt spray corrosion and vibration\u003C/li\u003E¶\u003Cli\u003EMade of recyclable polyethylene\u003C/li\u003E¶\u003Cli\u003EDesigned for non-upset and external upset tubing\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cbr /\u003E\u003Cbr /\u003E", "grpatr": "To Fit NUE Casing (in)|API Class|Packaging - Carton Quantity|Standard Colour", "grpflg": "Y" }, { "clsnam": "1688", "clsnbr": "1101100123", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Caps \u0026 Plugs", "catnm5": "VP Series", "imgnme": "sm_vp_series_silo-150.jpg", "notes": "The VP series is designed for plain-end plastic and aluminum pipe. These caps provide protection against impace damage and contamination in transit. The ventilation hole assures equalized atmospheric pressure inside the pipe preventing pressure build-up associated with dislodging the cap. These caps have been designed for easy installation and removal.¶¶Material: Low-Density Polyethylene¶Color: Blue¶", "grpatr": "American Standard|A (in)|A (mm)|C (in)|C (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1592", "clsnbr": "11011002", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "", "imgnme": "lg_caplugs_fan-series_01.jpg", "notes": "Caplugs has a full line of injection-molded, dip-molded, extruded and die-cut products to protect your flange surfaces. Each flange cover offers superior protection of the flange and is designed to be easily installed and removed. Protect your flange surfaces from damage, dust, moisture and foreign particles with one of our economical flange covers.¶¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1693", "clsnbr": "1101100201", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "CAB Series", "imgnme": "DMR_Caplugs_CAB-Series_800x800.jpg|DMR_Caplugs_CAB-Series_drawing414x1100.jpg", "notes": "An inexpensive way to bundle, secure or organize various items. Made of durable 6/6 nylon, we offer various lengths and tensile strengths for any application; from 4.1 inch, 18 pound, up to 48 inc, 175 pound in both a natural color and UV black.¶¶Part number CAB-200TT is a tensioning tool for use with 18 lb. through 50 lb. cable ties¶¶Part number CAB-300TT is a tensioning tool for use with 120 lb. through 175 lb. cable ties¶¶Material: Nylon¶Color: Natural, UV Black¶", "grpatr": "Colour|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Tensile Strength|Max Bundle Diameter|Max Bundle Diameter (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1694", "clsnbr": "1101100202", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "EPN-305 Series", "imgnme": "sm_epn305_series_silo-150.jpg", "notes": "EPN flange protectors are the most universal on the market. The EPN-305 series offers a versatile design allowing it to be used on a variety of differently sized flanges. These protectors are also able to be used on a variety of flange classifications, allowing our customers to eliminate excess inventory. ¶¶Material: Linear Low-Density Polyethylene¶Colour: Yellow¶Meets: ANSI B 16.5 DIN 2627-2638", "grpatr": "Nominal Pipe Size (in)|Packaging - Carton|A (in)|A (mm)|C (in)|C (mm)|D (in)|D (mm)", "grpflg": "Y" }, { "clsnam": "1695", "clsnbr": "1101100203", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "EPN-310 Series", "imgnme": "sm_epn310_series_silo-150.jpg", "notes": "Theis full-face flange protector is quick and easy to install and remove. Just push the cover onto the flange and it will wrap around to protect the face and sides of the flange. EPN-310 protectors also offer easier removal than any other full-face wrap-around protector in the industry. Its unique style is ideal for coated and conical bore flanges.¶Material: Linear Low-Density Polyethylene Colour: Yellow Meets: ANSI B 16.5", "grpatr": "To Cover Flange Sizes (in)|A (in)|A (mm)|C (in)|C (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1701", "clsnbr": "1101100204", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "Finishing Flange Series", "imgnme": "sm_finishingflange_series_silo-150.jpg", "notes": "Thees non-corroding finishing flanges are an economical replacement option for metal flanges used in plumbing, water heaters, refrigeration, and machinery industries. Thees flanges are durable, non-corroding and ensure a long-lasting attractive finished appearance.¶¶Material: Low-Density Polyethylene¶Standard Color: White¶", "grpatr": "Common Uses|A (in)|A (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1739", "clsnbr": "1101100205", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAF Series- 150 PSIG", "imgnme": "sm_faf_series_silo-150.jpg", "notes": "FAF series - 200 different parts fitting the full face on flanges for pipe sizes 1/2\u0022 to 20\u0022 with rating class designations from 150 to 900 PSI.¶Adhesive flanges are one way of connecting a pipe either to another pipe or a component such as a valve. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAF Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange.¶¶Material: High-Density Polyethylene¶Color: Black¶", "grpatr": "Nominal Pipe Size (in)|Packaging - Carton|A (in)|A (mm)", "grpflg": "Y" }, { "clsnam": "1744", "clsnbr": "1101100206", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAF Series- 1500 PSIG", "imgnme": "sm_faf_series_silo-150.jpg", "notes": "FAF series - 200 different parts fitting the full face on flanges for pipe sizes 1/2\u0022 to 20\u0022 with rating class designations from 150 to 900 PSI.¶Adhesive flanges are one way of connecting a pipe either to another pipe or a component such as a valve. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAF Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange.¶¶Material: High-Density Polyethylene¶Color: Black¶", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1745", "clsnbr": "1101100207", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAF Series- 2500 PSIG", "imgnme": "sm_faf_series_silo-150.jpg", "notes": "FAF series - 200 different parts fitting the full face on flanges for pipe sizes 1/2\u0022\u0022 to 20\u0022\u0022 with rating class designations from 150 to 900 PSI.¶Adhesive flanges are one way of connecting a pipe either to another pipe or a component such as a valve. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAF Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange.¶¶Material: High-Density Polyethylene¶Color: Black¶", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1740", "clsnbr": "1101100208", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAF Series- 300 PSIG", "imgnme": "sm_faf_series_silo-150.jpg", "notes": "FAF series - 200 different parts fitting the full face on flanges for pipe sizes 1/2\u0022 to 20\u0022 with rating class designations from 150 to 900 PSI.¶Adhesive flanges are one way of connecting a pipe either to another pipe or a component such as a valve. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAF Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange.¶¶Material: High-Density Polyethylene¶Color: Black¶", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1741", "clsnbr": "1101100209", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAF Series- 400 PSIG", "imgnme": "sm_faf_series_silo-150.jpg", "notes": "FAF series - 200 different parts fitting the full face on flanges for pipe sizes 1/2\u0022 to 20\u0022 with rating class designations from 150 to 900 PSI.¶Adhesive flanges are one way of connecting a pipe either to another pipe or a component such as a valve. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAF Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange.¶¶Material: High-Density Polyethylene¶Color: Black¶", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1742", "clsnbr": "1101100210", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAF Series- 600 PSIG", "imgnme": "sm_faf_series_silo-150.jpg", "notes": "FAF series - 200 different parts fitting the full face on flanges for pipe sizes 1/2\u0022 to 20\u0022 with rating class designations from 150 to 900 PSI.¶Adhesive flanges are one way of connecting a pipe either to another pipe or a component such as a valve. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAF Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange.¶¶Material: High-Density Polyethylene¶Color: Black¶", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1746", "clsnbr": "1101100211", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAF Series- 75 PSIG", "imgnme": "sm_faf_series_silo-150.jpg", "notes": "FAF series - 200 different parts fitting the full face on flanges for pipe sizes 1/2\u0022 to 20\u0022 with rating class designations from 150 to 900 PSI.¶Adhesive flanges are one way of connecting a pipe either to another pipe or a component such as a valve. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAF Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange.¶¶Material: High-Density Polyethylene¶Color: Black¶", "grpatr": "Nominal Pipe Size (in)|Packaging - Carton|A (in)|A (mm)", "grpflg": "Y" }, { "clsnam": "1743", "clsnbr": "1101100212", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAF Series- 900 PSIG", "imgnme": "sm_faf_series_silo-150.jpg", "notes": "FAF series - 200 different parts fitting the full face on flanges for pipe sizes 1/2\u0022 to 20\u0022 with rating class designations from 150 to 900 PSI.¶Adhesive flanges are one way of connecting a pipe either to another pipe or a component such as a valve. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAF Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange.¶¶Material: High-Density Polyethylene¶Color: Black¶", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1750", "clsnbr": "1101100213", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAN 150 PSIG Series", "imgnme": "sm_fan_series_silo-150.jpg", "notes": "FAN series - 70 different parts fitting the full face on flanges for pipe sizes 1/2\u0022 to 20\u0022 with rating class designations from 150 to 900 PSI. Non-Adhesive flanges are one way of connecting a pipe either to another pipe or a component such as a valve. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAN Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black ¶¶", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Matching Bolt Hole Plug|Cable Tie", "grpflg": "Y" }, { "clsnam": "1760", "clsnbr": "1101100214", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAN 1500 PSIG Series", "imgnme": "sm_fan_series_silo-150.jpg", "notes": "FAN series - 70 different parts fitting the full face on flanges for pipe sizes 1/2\u0022 to 20\u0022 with rating class designations from 150 to 900 PSI. Non-Adhesive flanges are one way of connecting a pipe either to another pipe or a component such as a valve. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAN Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black ¶¶", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Matching Bolt Hole Plug|Cable Tie", "grpflg": "Y" }, { "clsnam": "1762", "clsnbr": "1101100215", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAN 2500 PSIG Series", "imgnme": "sm_fan_series_silo-150.jpg", "notes": "FAN series - 70 different parts fitting the full face on flanges for pipe sizes 1/2\u0022 to 20\u0022 with rating class designations from 150 to 900 PSI. Non-Adhesive flanges are one way of connecting a pipe either to another pipe or a component such as a valve. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAN Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black ¶¶", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Matching Bolt Hole Plug|Cable Tie", "grpflg": "Y" }, { "clsnam": "1752", "clsnbr": "1101100216", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAN 300 PSIG Series", "imgnme": "sm_fan_series_silo-150.jpg", "notes": "FAN series - 70 different parts fitting the full face on flanges for pipe sizes 1/2\u0022 to 20\u0022 with rating class designations from 150 to 900 PSI. Non-Adhesive flanges are one way of connecting a pipe either to another pipe or a component such as a valve. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAN Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black ¶¶", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Matching Bolt Hole Plug|Cable Tie", "grpflg": "Y" }, { "clsnam": "1754", "clsnbr": "1101100217", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAN 400 PSIG Series", "imgnme": "sm_fan_series_silo-150.jpg", "notes": "FAN series - 70 different parts fitting the full face on flanges for pipe sizes 1/2\u0022 to 20\u0022 with rating class designations from 150 to 900 PSI. Non-Adhesive flanges are one way of connecting a pipe either to another pipe or a component such as a valve. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAN Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black ¶¶", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Matching Bolt Hole Plug|Cable Tie", "grpflg": "Y" }, { "clsnam": "1756", "clsnbr": "1101100218", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAN 600 PSIG Series", "imgnme": "sm_fan_series_silo-150.jpg", "notes": "FAN series - 70 different parts fitting the full face on flanges for pipe sizes 1/2\u0022 to 20\u0022 with rating class designations from 150 to 900 PSI. Non-Adhesive flanges are one way of connecting a pipe either to another pipe or a component such as a valve. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAN Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black ¶¶", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Matching Bolt Hole Plug|Cable Tie", "grpflg": "Y" }, { "clsnam": "1748", "clsnbr": "1101100219", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAN 75 PSIG Series", "imgnme": "sm_fan_series_silo-150.jpg", "notes": "FAN series - 70 different parts fitting the full face on flanges for pipe sizes 1/2\u0022 to 20\u0022 with rating class designations from 150 to 900 PSI. Non-Adhesive flanges are one way of connecting a pipe either to another pipe or a component such as a valve. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAN Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black ¶¶", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton|Matching Bolt Hole Plug|Cable Tie|B (in)|B (mm)|C (in)|C (mm)", "grpflg": "Y" }, { "clsnam": "1758", "clsnbr": "1101100220", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAN 900 PSIG Series", "imgnme": "sm_fan_series_silo-150.jpg", "notes": "FAN series - 70 different parts fitting the full face on flanges for pipe sizes 1/2\u0022 to 20\u0022 with rating class designations from 150 to 900 PSI. Non-Adhesive flanges are one way of connecting a pipe either to another pipe or a component such as a valve. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAN Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black ¶¶", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Matching Bolt Hole Plug|Cable Tie", "grpflg": "Y" }, { "clsnam": "1766", "clsnbr": "1101100221", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAR Series", "imgnme": "sm_far_series_silo-150.jpg", "notes": "FAR series - 26 different parts fitting the raised face on flanges for pipe sizes 1/2\u0022 to 42\u0022 with rating class designations from 150 to 2500 PSI. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAR Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1768", "clsnbr": "1101100222", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAR 150 PSIG A Series", "imgnme": "sm_far_series_silo-150.jpg", "notes": "FAR series - 26 different parts fitting the raised face on flanges for pipe sizes 1/2\u0022 to 42\u0022 with rating class designations from 150 to 2500 PSI. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAR Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1770", "clsnbr": "1101100223", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAR 150 PSIG B Series", "imgnme": "sm_far_series_silo-150.jpg", "notes": "FAR series - 26 different parts fitting the raised face on flanges for pipe sizes 1/2\u0022 to 42\u0022 with rating class designations from 150 to 2500 PSI. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAR Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1772", "clsnbr": "1101100224", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAR 300 PSIG A Series", "imgnme": "sm_far_series_silo-150.jpg", "notes": "FAR series - 26 different parts fitting the raised face on flanges for pipe sizes 1/2\u0022 to 42\u0022 with rating class designations from 150 to 2500 PSI. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAR Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1774", "clsnbr": "1101100225", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAR 300 PSIG B Series", "imgnme": "sm_far_series_silo-150.jpg", "notes": "FAR series - 26 different parts fitting the raised face on flanges for pipe sizes 1/2\u0022 to 42\u0022 with rating class designations from 150 to 2500 PSI. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAR Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1776", "clsnbr": "1101100226", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAR 400 PSIG A Series", "imgnme": "sm_far_series_silo-150.jpg", "notes": "FAR series - 26 different parts fitting the raised face on flanges for pipe sizes 1/2\u0022 to 42\u0022 with rating class designations from 150 to 2500 PSI. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAR Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1778", "clsnbr": "1101100227", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAR 400 PSIG B Series", "imgnme": "sm_far_series_silo-150.jpg", "notes": "FAR series - 26 different parts fitting the raised face on flanges for pipe sizes 1/2\u0022 to 42\u0022 with rating class designations from 150 to 2500 PSI. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAR Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1780", "clsnbr": "1101100228", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAR 600 PSIG A Series", "imgnme": "sm_far_series_silo-150.jpg", "notes": "FAR series - 26 different parts fitting the raised face on flanges for pipe sizes 1/2\u0022 to 42\u0022 with rating class designations from 150 to 2500 PSI. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAR Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1782", "clsnbr": "1101100229", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAR 600 PSIG B Series", "imgnme": "sm_far_series_silo-150.jpg", "notes": "FAR series - 26 different parts fitting the raised face on flanges for pipe sizes 1/2\u0022 to 42\u0022 with rating class designations from 150 to 2500 PSI. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAR Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1764", "clsnbr": "1101100230", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAR 75 PSIG Series", "imgnme": "sm_far_series_silo-150.jpg", "notes": "FAR series - 26 different parts fitting the raised face on flanges for pipe sizes 1/2\u0022 to 42\u0022 with rating class designations from 150 to 2500 PSI. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAR Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1784", "clsnbr": "1101100231", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAR 900 PSIG A Series", "imgnme": "sm_far_series_silo-150.jpg", "notes": "FAR series - 26 different parts fitting the raised face on flanges for pipe sizes 1/2\u0022 to 42\u0022 with rating class designations from 150 to 2500 PSI. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAR Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1786", "clsnbr": "1101100232", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FAR 900 PSIG B Series", "imgnme": "sm_far_series_silo-150.jpg", "notes": "FAR series - 26 different parts fitting the raised face on flanges for pipe sizes 1/2\u0022 to 42\u0022 with rating class designations from 150 to 2500 PSI. Each flange has a highly machined sealing surface that needs to be protected during transport and storage. The FAR Series is part of the latest addition to Caplugs line of flange protection products, offering the availability of a size for virtually any AMSE B16.5 pipe flange. Material: High-Density Polyethylene Color: Black", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1699", "clsnbr": "1101100233", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FBH Series", "imgnme": "sm_fbh_series_silo-150.jpg", "notes": "The FBH series is to be used with Caplugs non-adhesive FAN series. Outer ribs allow for tolerances in hole diameters but provide a tight fit so that protector is held securely against flange. HDPE for high durability with 9 sizes ranging from 5/8\u0027 to 1 5/8\u0027.¶¶Material: High-Density Polyethylene¶Color: Black¶¶", "grpatr": "Bolt Hole Size (in)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Packaging - Mini Pak|Used with", "grpflg": "Y" }, { "clsnam": "1788", "clsnbr": "1101100234", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FC 150 Series", "imgnme": "sm_fc_series_silo-150.jpg", "notes": "Widely viewed as the industry standard for flange protection, this cover requires no additional fastening devices. Simply insert the flange into bolt holes and apply minimal pressure. These flange protectors were engineered for quick and easy installation. The FC series is weather-and petroleum- resistant. Material: Low-Density Polyethylene Color: Blue - 150 lb. series Black - 300 lb. series Meets: ANSI B 16.5 and API specifications. Suitable for use on ASA and BS 1560 flanges ¶¶", "grpatr": "Pipe Size (in)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1791", "clsnbr": "1101100235", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FC 300 Series", "imgnme": "sm_fc_series_silo-150.jpg", "notes": "Widely viewed as the industry standard for flange protection, this cover requires no additional fastening devices. Simply insert the flange into bolt holes and apply minimal pressure. These flange protectors were engineered for quick and easy insatllation. The FC series is weather-and petroleum- resistant. Material: Low-Density Polyethylene Color: Blue - 150 lb. series Black - 300 lb. series Meets: ANSI B 16.5 and API specifications. Suitable for use on ASA and BS 1560 flanges", "grpatr": "Pipe Size (in)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "2614", "clsnbr": "1101100236", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FCH Series", "imgnme": "CNC_FlangeProtectors-Grey-HDPE_RenderScene_600x600.jpg", "notes": "\u003Cspan style=\u0022font-size: 12.5px; font-family: \u0027Open Sans\u0027; white-space: normal; word-spacing: 0px; text-transform: none; float: none; font-weight: 400; color: #555555; font-style: normal; orphans: 2; widows: 2; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial;\u0022\u003EHDPE plastic cut to the OD of the flange, with 4 bolt holes\u003C/span\u003E", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Pressure Class", "grpflg": "Y" }, { "clsnam": "2615", "clsnbr": "1101100237", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FCM Series", "imgnme": "CNC_FlangeProtectors-MDF_RenderScene_600x600.jpg", "notes": "\u003Cspan style=\u0022font-size: 12.5px; font-family: \u0027Open Sans\u0027; white-space: normal; word-spacing: 0px; text-transform: none; float: none; font-weight: 400; color: #555555; font-style: normal; orphans: 2; widows: 2; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial;\u0022\u003EMDF cut to the OD of the flange, with 4 bolt holes\u003C/span\u003E", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Pressure Class", "grpflg": "Y" }, { "clsnam": "2613", "clsnbr": "1101100238", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FCP Series", "imgnme": "CNC_FlangeProtectors-Corrugated_RenderScene-2_600x600.jpg", "notes": "\u003Cspan style=\u0022font-size: 12.5px; font-family: \u0027Open Sans\u0027; white-space: normal; word-spacing: 0px; text-transform: none; float: none; font-weight: 400; color: #555555; font-style: normal; orphans: 2; widows: 2; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial;\u0022\u003ECorrugated plastic cut to the OD of the flange, with 4 bolt holes.\u003C/span\u003E", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Pressure Class", "grpflg": "Y" }, { "clsnam": "2616", "clsnbr": "1101100239", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FCW Series", "imgnme": "CNC_FlangeProtectors-Plywood_RenderScene_600x600.jpg", "notes": "\u003Cspan style=\u0022font-size: 12.5px; font-family: \u0027Open Sans\u0027; white-space: normal; word-spacing: 0px; text-transform: none; float: none; font-weight: 400; color: #555555; font-style: normal; orphans: 2; widows: 2; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial;\u0022\u003EPlywood cut to the OD of the flange, with 4 bolt holes\u003C/span\u003E", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Pressure Class", "grpflg": "Y" }, { "clsnam": "2309", "clsnbr": "1101100240", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FFP Series", "imgnme": "FFPSeries_silo.jpg|FFPSeries_app.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EFFP series finger-lock flange covers feature a die-cut configuration with locking bolt hole tabs to keep protector in place without adhesive or separate fasteners.\u003C/p\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ECam make any size up to 60\u0022\u0022\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EAvailable in ANSI B-16.5 or 16.47\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ELow-density polytheylene\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EBlack\u003C/p\u003E", "grpatr": "Nominal Pipe Size (in)|A (in)|B (in)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "2310", "clsnbr": "1101100241", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "FN Series", "imgnme": "FNSeries_silo.jpg|FNSeries_group.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EThe FN series non-corroding finishing flanges are an economical replacement option for metal flanges used in plumbing, water heaters, refrigeration, and machinery industries. These flanges are durable, non-corroding and ensure a long-lasting attractive finished appearance.\u003C/p\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EWide range of sizes available\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ECan replace metal flanges\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ELow-density polyethylene\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003Ewhite\u003C/p\u003E", "grpatr": "Common Uses (in)|A (in)|A (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "2306", "clsnbr": "1101100242", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "RFP Series", "imgnme": "RFP_series_silo.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EThe RFP series was designed for pressure classes 400, 600, 900, 1500 and 2500 lb. Provides superior impact protection for raised-face surfaces with no fasteners required. Helps reduce SKU inventory and also serves as a low-temperature paint mask.\u003C/p\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ELow-density polyethylene\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ERed\u003C/p\u003E", "grpatr": "Pressure class (lb)|Nominal Pipe Size (in)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "2195", "clsnbr": "1101100243", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "TLF Series", "imgnme": "DMR_Caplugs_TLF_Group_400x400.jpg", "notes": "\u003CP\u003EToggle Lock Flange Protectors\u003C/P\u003E¶\u003CP\u003EDMR caplugs new patented* flange protectors are designed for ease of installation and removal, with a new level of flexibility enabling easier alignment with the bolt holes. The new hinged lug design allows for variances which current fixed protectors cannot accomodate. Ribs on the lug aid in the removal process. \u003CBR\u003E\u003C/P\u003E¶\u003CP\u003EOur Toggle Lock Flange Protectors offer an economical solution for protecting the raised face of expensive flanges.\u003Cul\u003E\u003Cli\u003E Flexible hinge for improved installation and removal\u003C/li\u003E\u003Cli\u003EIncreased number of lugs on larger sizes for better retention\u003C/li\u003E\u003Cli\u003EThicker top pad for superior impact protection\u003C/li\u003E\u003Cli\u003EEnhanced side and end walls enable greater surface contact with the face of the flange\u003C/li\u003E\u003Cli\u003EColor coded for ease of recognition\u003C/li\u003E\u003Cli\u003EComplete range of sizes 1/2\u0022 thru 14\u0022 (150 \u0026 300 classes)\u003C/li\u003E\u003Cli\u003ERange of 600, 900, 1500 and 2500 Lb Pressure Class Sizes - API specifications\u003C/li\u003E\u003C/ul\u003E", "grpatr": "Pressure Class (in)|Nominal Pipe Size (in)|API Nominal Flange Size|Packaging - Carton|Packaging - Mini Pak|Standard Colour", "grpflg": "Y" }, { "clsnam": "1702", "clsnbr": "1101100244", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "Valve Flange Protectors Series", "imgnme": "sm_valveflangeprotect_series_silo-150.jpg", "notes": "These protectors have a tapered body and wide flange to protect the entire machined surface of the valve flange. Use these flange protectors to seal out dirt and contaminants. They also make an ideal paint mask. Friction-fits to the valve bore.¶¶Material: Low-Density Polyethylene¶Color: Orange¶", "grpatr": "Nominal Pipe Size (in)|Flange Thickness (mm)|A (in)|B (in)|C (in)|D (in)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "2305", "clsnbr": "1101100245", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Flange Protectors/Accessories", "catnm5": "WNC Series", "imgnme": "WNC_silo.jpg|WNC App_group.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EThe WNC Series covers machined weld neck end of flange, opposite raised face, to avoid damage in transit or storage. Commonly used by carbon and stainless steel flange manufacturers.\u003C/p\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EProtects weld neck edge\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EEasy to install and remove\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EVinyl\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EBlack\u003C/p\u003E", "grpatr": "Nominal Pipe Size (in)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1591", "clsnbr": "11011003", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Vinyl", "catnm5": "", "imgnme": "lg_caplugs_vf-series_01.jpg", "notes": "Caplugs has a full line of injection-molded, dip-molded, extruded and die-cut products to protect your flange surfaces. Each flange cover offers superior protection of the flange and is designed to be easily installed and removed. Protect your flange surfaces from damage, dust, moisture and foreign particles with one of our economical flange covers.¶¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1689", "clsnbr": "1101100301", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Vinyl", "catnm5": "DR Series", "imgnme": "sm_dr_series_silo-150.jpg", "notes": "Developed as a quick, effective means of protecting gear and tube sections, Series DR Ding Ring wrap-around protectors are both ruggedly designed and easy to use. These universally adjustable rings come in one size capable of wrapping up virtually any size tube diameter. The soft, thick vinyl material offers excellent impact protection, preventing many of the dents and scratches often caused by contact with tools or handling racks. The reusable Series DR Ding Rings can be easily cleaned using a mild detergent. As a result, they can be used hundreds of times to provide years of product protection.¶¶Material: Flexible PVC¶Color: Red¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1690", "clsnbr": "1101100302", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Vinyl", "catnm5": "VAS Series", "imgnme": "sm_vas_series_silo-150.jpg", "notes": "Designed to accommodate most American Standard Association, Navy and Military sizes, Series VAS Vinyl Flange Covers protect flanges by sealing out dust and moisture during shipment. Series VAS is available in a wide range of sizes.¶¶Material: Vinyl¶Color: Yellow¶Optional Colors: White, Black, Brown, Orange, Red, Green, Gray, Blue¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1691", "clsnbr": "1101100303", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Vinyl", "catnm5": "VF Series", "imgnme": "sm_vf_series_silo-150.jpg", "notes": "Series VF Vinyl Flange Covers seal out dust and moisture during shipment to protect flange surfaces. These covers are quick and easy to apply, and provide a snug fit for flanged and beaded tubes. Series VF is available in a variety of sizes.¶¶Material: Vinyl¶Color: Yellow¶Optional Colors: White, Black, Brown, Orange, Red, Green, Gray, Blue¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1692", "clsnbr": "1101100304", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Pipe and Flange Protection", "catnm4": "Vinyl", "catnm5": "VSR Series", "imgnme": "sm_vsr_series_silo-150.jpg", "notes": "Series VSR Vinyl Snap Ring Flange Covers seal out dust and moisture during shipment to protect flange surfaces. These covers are designed to snap on easily for a snug fit. Series VSR is available in a wide range of sizes.¶¶Material: Vinyl¶Color: Yellow¶Optional Colors: White, Black, Brown, Orange, Red, Green, Gray, Blue¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1246", "clsnbr": "110111", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "", "catnm5": "", "imgnme": "lg_caplugs_pdf-series_01.jpg", "notes": "\u003CSPAN class=body\u003EThreaded, non-threaded, load bearing, and finishing plugs - available in plastic, vinyl, and many other materials.\u003C/SPAN\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1362", "clsnbr": "11011101", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Non-Threaded", "catnm5": "", "imgnme": "lg_caplugs_ezp-series_01.jpg", "notes": "These plugs are ideal for plugging threaded and non-threaded parts as well as for providing masking protection. They\u0027re easy to slip on and off, while maintaining a secure fit for production protection. Staight plugs are designed to provide snug fitting production protection and easy application and removal.¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1407", "clsnbr": "1101110101", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Non-Threaded", "catnm5": "CPT Series (Centre Pull-Tab Tapered Plugs)", "imgnme": "DMR_CPTSeries_400x400.jpg|DMR_CPTSeries_drawing_570x670.jpg", "notes": "Series CPT Plugs have the same configuration and dimensions of standard Tapered Caplugs but with an integral center-pull tab which facilitates insertion and removal of the plug. The tab extends well above the plug body, making it easy to grasp. Since the tab is molded fully into the end and side walls of the plug, it will not break off during plug removal. The concentric design of the CPT allows a straight-pull removal without disturbing the o-ring fittings. ¶¶Material: Low-Density Polyethylene¶¶Colour*: red¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1408", "clsnbr": "1101110102", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Non-Threaded", "catnm5": "CPT-NF Series (Centre Pull-Tab No Flange)", "imgnme": "DMR_CPTNFSeries_400x400.jpg|DMR_CPTNFSeries_drawing_520x670.jpg", "notes": "These plugs are ideal for use in tight places or when two or more openings need to be plugged so close together there is no room for a flange. The pull-tab is fully molded into the body of the plug ensuring it will not break off during removal.¶¶Material: Low-Density Polyethylene¶¶Colour*: Orange¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1409", "clsnbr": "1101110103", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Non-Threaded", "catnm5": "CT Series (L- and M-Style Tubing Plugs)", "imgnme": "DMR_CTSeries_400x400.jpg|DMR_CTSeries_drawing_370x570.jpg", "notes": "Specifically designed to plug and protect Type L- and M-style tubing. The tapered body with reinforced cross-braces provides exceptional protection for the tube configuration. ¶¶Material: Low-Density Polyethylene¶¶Colour: Blue¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Tubing OD (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2242", "clsnbr": "1101110104", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Non-Threaded", "catnm5": "CXT Series", "imgnme": "DMR_CXTSeries_400x400.jpg|DMR_CXTSeries_drawing_670x620.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EThe CXT series tapered plugs have the same configuration and dimensions of standard tapered plugs but with an integral cross-design pull tab which facilitates insertion and removal of the plug. The tab extends well above the plug body, making it easy to grasp. Since the tab is molded fully into the end and side walls of the plug, it will not break off during plug removal. Additionally, the cross tabs and wide flange design prevent final connections being made without first removing the plug. \u003C/p\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EMaterial:\u003C/strong\u003E\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003ELow-Density Polyethylene\u003C/p\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EColor:\u003C/strong\u003E\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003EOrange\u003C/p\u003E", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|Packaging - Carton[Carton]", "grpflg": "Y" }, { "clsnam": "1411", "clsnbr": "1101110105", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Non-Threaded", "catnm5": "Extra-Wide Flange Centre Pull-Tab", "imgnme": "DMR_XtraWideFlange_400x400.jpg|DMR_ExtraWide_drawing_470x670.jpg", "notes": "This tapered plug features a center pull-tab design that extends above the flange for easy removal. The extra-wide flange protects more surface area, preventing improper installation.¶¶Material: Low-Density Polyethylene¶¶Colour: Orange¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|NPT/BSP (in)|Standard (in)|Hole (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]|Metric (in)", "grpflg": "Y" }, { "clsnam": "1410", "clsnbr": "1101110106", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Non-Threaded", "catnm5": "ECP Series (Ergonomic Centre Pull-Tab Plug)", "imgnme": "DMR_ECPSeries_400x400.jpg|DMR_ECPSeries_drawing_370x670.jpg", "notes": "Series ECP plugs offer the convenience of a center-pull tab plug in an ergonomic material. These plugs are an excellent alternative to traditional threaded plugs because they save the time and labor of screwing in or unscrewing a part during insertion and removal. Depending upon port size, ECP series plugs may provide a seal against residual oil leakage during shipment. Since the tab is molded fully into the end and sidewalls of the plug, it does not break off during plug removal. ECP series plugs fit all metric thread pitches for the given diameter and are color coded for easy size identification.¶¶¶Material: FlexTemp(Thermoplastic Rubber)¶¶Colour: See Chart Below¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]|Colour", "grpflg": "Y" }, { "clsnam": "1412", "clsnbr": "1101110107", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Non-Threaded", "catnm5": "EZP Series (NPT Plugs)", "imgnme": "DMR_EZPSeriesPlugs_400x400.jpg|DMR_EZPSeries_drawing_370x570.jpg", "notes": "These tapered plugs were designed to cap NPT fittings, but have a universal design ideal for a variety of applications. These durable, multi-use plugs have a flange for easy installation and removal.¶¶Material: Low-Density Polyethylene¶¶Colour: Orange¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|NPT Thread Size (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1413", "clsnbr": "1101110108", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Non-Threaded", "catnm5": "K Series (Plugs For Round Tubing)", "imgnme": "DMR_KSeries_400x400.jpg|DMR_KSeries_drawing_370x670.jpg", "notes": "Series K Tubing Plugs are especially designed for applications where the outside diameter of the closure should not exceed the outside diameter of the tubing. Flanges fit flush with outer walls of tubing, providing positive protection against moisture and dirt. Especially suitable for general purpose, Type K copper tubing, SAE Standard J-528.¶¶Material: Low-Density Polyethylene¶¶Colour*: Red¶¶Applicable Specs: MIL-C-5501/8, NAS 843¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|F (in)|F (mm)|Tubing or O.D. Inches (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1414", "clsnbr": "1101110109", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Non-Threaded", "catnm5": "L Series (Lift-Tab Tapered Tapered Plugs)", "imgnme": "DMR_LSeries_400x400.jpg|DMR_LSeries_drawing_370x670.jpg", "notes": "Having the same dimensions as standard Tapered Caplugs of like sizes, Series L plugs offer the added convenience of an integral lift-tab which facilitates their removal. Since it extends above the plug body, the tab is easy to grasp. This is particularly advantageous with plugs in the smaller sizes and those installed in tight quarters or difficult to reach locations. A bead molded on the tab affords a positive grip. Pulling the tab exerts an off-center force which breaks the seal between plug and wall of opening, permitting instant withdrawal.¶¶Material: Low-Density Polyethylene¶¶Colour*: Red¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1415", "clsnbr": "1101110110", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Non-Threaded", "catnm5": "Multi-Purpose Plug (Snap-In Plug)", "imgnme": "DMR_MultiPurposeSeries_400x400.jpg|DMR_MultiPurposePlug_drawing_320x500.jpg", "notes": "This is an attractive plug to finish off holes in sheet metal or other surfaces. the \u0022Quadra-Level\u0022 locking grooves on spring tabs adhere tightly to varying gauges of materials. These plugs are quick and easy to install with just fingertip pressure.¶¶Material: Nylon¶¶Colour: Black¶¶", "grpatr": "Holes Sizes (in)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1416", "clsnbr": "1101110111", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Non-Threaded", "catnm5": "OT Series (Type K-Style)", "imgnme": "DMR_OTSeries_400x400.jpg|DMR_OTSeries_drawing_370x570.jpg", "notes": "Specifically designed to protect Type K-Sytle tubing. The tapered body with reinforced cross-braces provides exceptional protection for the tube configuration.¶¶Material: Low-Density Polyethylene¶¶Colour: Green¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Tubing O.D (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1417", "clsnbr": "1101110112", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Non-Threaded", "catnm5": "PTP Series (Tapered Paper Plugs)", "imgnme": "DMR_PTPSeries_400x400.jpg|DMR_PTPSeries_drawing_570x670.jpg", "notes": "Manufactured from natural paper which is 100% recyclable, Paper Caplugs are the answer for applications requiring environmentally friendly components. The special paper used in the manufacture of Paper Caplugs is formulated from a blend of 90% virgin pulp and 10% post-consumer recycled paper. These closures will withstand temperatures up to 400 ºF (204 ºC), making them ideal for high-temperature application.¶¶Material: 90 lb. Paperboard¶¶Colour: Brown¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Pipe Size (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1418", "clsnbr": "1101110113", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Non-Threaded", "catnm5": "PZP Series (Unified Plugs)", "imgnme": "DMR_PZPSeriesPlugs_400x400.jpg|DMR_PZPSeriesPlug_drawing_470x670.jpg", "notes": "These tapered plugs were designed to protect hydraulic and air-hose fittings, but are versatile enough to fit a variety of applications. The thick flange enables easy installation and removal.¶¶Material: Low-Density Polyethylene¶¶Colour: Orange¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|Standard Thread Size (in)[Thread Size]|Hole Size (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2244", "clsnbr": "1101110114", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Non-Threaded", "catnm5": "RSP Series", "imgnme": "DMR_RSPSeries_400x400.jpg|DMR_RSP Series drawing_670x370.jpg", "notes": "\u003Cspan style=\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003EThe RSP-SH series are plugs for use during shipping and pressure testing of copper tubing and HVAC compressors. The rubber plug reseals itself after any nitrogen charging that may occur durring shipping.\u003C/span\u003E\u003Cbr style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022 /\u003E\u003Cbr style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022 /\u003E\u003Cstrong style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: bold 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003EMaterial:\u003C/strong\u003E\u003Cspan style=\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003E\u003Cspan class=\u0022Apple-converted-space\u0022\u003E \u003C/span\u003EStyrene Butadiene Rubber\u003C/span\u003E\u003Cbr style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif;", "grpatr": "To Fit Tube Size (in)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]", "grpflg": "Y" }, { "clsnam": "1419", "clsnbr": "1101110115", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Non-Threaded", "catnm5": "SPT Series (Side Pull-Tab Plugs)", "imgnme": "DMR_SPTSeries_400x400.jpg|DMR_SPTSeries_drawing_470x670.jpg", "notes": "These side pull-tab plugs were designed for quick and easy removal. These shallow plugs with small flanges are ideal for plugging open ports in areas with limited space. The pull-tab is molded with a small bead to enable easy gripping and removal. These plugs are color coded for your convenience.¶¶Material: Low-Density Polyethylene¶¶Colour: See Chart¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|To Fit Thread Size|Colour|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1420", "clsnbr": "1101110116", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Non-Threaded", "catnm5": "STC Series (Snap-to-Connect Plugs)", "imgnme": "DMR_STCSeries_400x400.jpg|DMR_STCSeries_drawing_370x670.jpg", "notes": "The STC-Plug series is used for plugging quick disconnect coupling ports. First introduced to the transportation industry it is now being made available for many other applications where a reduction in assembly time installation or removal is desired. Specific applications include coupling ports on hydraulic motors, pumps, and other control devices.¶¶Material: FlexTemp (Thermoplastic Rubber)¶¶Colour: Black¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1363", "clsnbr": "11011102", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "", "imgnme": "lg_caplugs_pd-series_01.jpg", "notes": "Plastic and metal screw-in plugs provide protection for internally threaded parts, flared and flareless fittings, SAE O-Ring ports, NPT pipe fittings, and tube ends. Threaded plugs are available in straight, NPT, metric and BSP threads.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1424", "clsnbr": "1101110201", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "ADP Series (For Flareless Tube Ends)", "imgnme": "DMR_ADPSeries_400x400.jpg|DMR_ADPSeries_drawing_370x570.jpg", "notes": "Series ADP Plugs have a dimpled nose section that forms a low pressure seal with flareless tube ends. The addition of a neoprene shoulder gasket enables the ADP-GN to provide a positive seal on the spot face of the O-ring port. Gaskets are also optionally available in Butyl or Buna N rubber.¶¶Material: 3003-0 Aluminum Alloy ¶¶Colour: Natural (Silver)¶¶Applicable Specs: MIL-C-5501/2, NAS-842", "grpatr": "B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Tube Size|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]|Thread Size", "grpflg": "Y" }, { "clsnam": "1425", "clsnbr": "1101110202", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "AFO Series (Flat-Faced O-Ring Hydraulic Fittings)", "imgnme": "DMR_AFOSeries_400x400.jpg|DMR_AFOSeries_drawing_450x700.jpg", "notes": "Series AFO Plugs are designed for positive, metal to metal threaded protection of fluid lines and fittings. Available with optional neoprene gaskets. Sealing gaskets are also available in Butyl or Buna N rubber.¶¶Material: 3003-0 Aluminum Alloy ¶¶Colour: Natural (Silver)", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Thread Size (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1426", "clsnbr": "1101110203", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "ASP Series (for 37 Deg. Flared Fittings)", "imgnme": "DMR_ASPSeries_400x400.jpg|DMR_ASPSeries_drawing_370x570.jpg", "notes": "Designed for protection of 37 Deg. flared fittings and straight-threaded ports, Series ASP Plug has a nose section that seals on flared fittings without a gasket. The ASP-GN has an added neoprene shoulder gasket for low-pressure sealing of threaded ports. Special gaskets are also available in Butyl or Buna N rubber.¶ ¶Material 3003-0 Aluminum Alloy ¶¶Colour: Natural (Silver)¶¶Applicable Specs: MIL-C-5501/1, NAS-818, NAS-836", "grpatr": "B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Fit Thread Size (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1427", "clsnbr": "1101110204", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "BSP Series (For British Standard Pipe Fittings)", "imgnme": "DMR_BSPSeries_400x400.jpg|DMR-BSPSeries_drawing_370x600.jpg", "notes": "Series BSP Plugs provide positive protective sealing on ports threaded for British Standard Pipe fittings. A unique flange compression seal prevents leakage of residual fluid. Designed for easy finger installation, a 12-point head enables socket or wrench tightening for a positive seal.¶¶¶Material: Polypropylene ¶¶Colour*: Yellow", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Thread Size|12 Point Socket Size|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1428", "clsnbr": "1101110205", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "BT Series (BSP Sealing Plugs)", "imgnme": "DMR_BTSeries_400x400.jpg|DMR_BTSeries_drawing_420x570.jpg", "notes": "The BT series is designed to protect British Standard Pipe fittings. This plug is engineered with five complete threads to provide a tight fit. The \u0022sealing lip\u0022 enables each plug to provide a secure seal. The BT series can be applied or removed with a screwdriver, socket wrench, power tool or manually. ¶¶Material: Nylon 6 ¶¶Colour: Yellow", "grpatr": "B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|To Plug BSP Thread Size|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1429", "clsnbr": "1101110206", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "DPN Series (Threaded UN and UNS Plugs)", "imgnme": "DMR_DPNSeries_400x400.jpg|DMR_DPNSeries_drawing_370x570.jpg", "notes": "Originally these plugs were engineered for use in aircraft and hydraulic equipment. They provide protection against contaminants while protecting delicate threads. The rolled thread design allows them to be threaded in or simply pushed in. These threads were also designed to conform to UN and UNS specifications.¶¶Material: High-Density Polyethylene ¶¶Colour: Blue", "grpatr": "B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Tube Size (in)|Thread Size (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1430", "clsnbr": "1101110207", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "MSP Series (For Metric-Threaded Ports)", "imgnme": "DMR_MSPSeries_400x400.jpg|DMR_MSPSeries_drawing_370x670.jpg", "notes": "Series MSP Plugs feature two concentric, raised rings on the underside of the flange to provide positive sealing around metric-threaded ports. A cross-slotted head makes it easy to tighten with a screwdriver.¶¶Material: High-Density Polyethylene¶¶Colour*: Green¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Plug Thread Size|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1431", "clsnbr": "1101110208", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "MT Series (Metric Sealing Plugs)", "imgnme": "DMR_MTSeries_400x400.jpg|DMR_MTSeries_drawing_470x670.jpg", "notes": "Designed to protect metric fittigns, this plug is engineered with five complete threads to provide a tight fit. The \u0022sealing lip\u0022 enables each plug to provide a secure seal. The MT series can be applied or remvoed with a screwdriver, socket wrench, power tool, or manually. ¶¶Material: Nylon 6¶¶Colour: Yellow", "grpatr": "B (mm)|C (mm)|D (mm)|Plug Metric Thread Size|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1432", "clsnbr": "1101110209", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "P Series (Threaded Plugs for Pipe Fittings)", "imgnme": "DMR_PSeries_400x400.jpg|DMR_PSeries_drawing1_300x520.jpg|DMR_PSeries_drawing2_300x520.jpg|DMR_PSeries_drawing3_300x520.jpg|DMR_PSeries_drawing4_320x670.jpg|DMR_PSeries_drawing5_320x670.jpg|DMR_PSeries_drawing6_370x570.jpg", "notes": "Series P Pipe Plugs are available in three styles: square head, round head and recessed socket. They are molded in high density polyethylene and are ideal for keeping moisture, dirt and other contaminants from NPT-threaded ports.¶¶Material: High-Density Polyethylene¶¶Colour*: Red¶¶Applicable Specs: MIL-C-52078, MIL-C-5501/5,NAS 840", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Thread Size|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1433", "clsnbr": "1101110210", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "PD Series (Threaded Plugs for Flared JIC Fittings)", "imgnme": "DMR_PDSeries_400x400.jpg|DMR_PDSeries_drawing_370x670.jpg", "notes": "Series PD Plugs, designed for use on flared JIC fittings, are knurled for ease of application. They will seal low pressure requirements with light finger tightening. PD Plugs can be used to seal 37º flare fittings without gaskets.¶¶¶Material: High-Density Polyethylene¶¶Colour*: Red¶¶Applicable Specs: MIL-C-52078, MIL-C-5501/1, NAS 833", "grpatr": "B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|To Plug Nominal Tubing Sizes (in)|To Fit Thread Size (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1434", "clsnbr": "1101110211", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "PDE Series (for Flareless Tube and Nut Assemblies)", "imgnme": "DMR_PDESeries_400x400.jpg|DMR_PDESeries_drawing_370x570.jpg", "notes": "Knurled for ease of application, Series PDE Plugs are designed to fit MS-21921 tube and nut assemblies interchangeably. They can be installed with light finger tightening to seal beyond normal requirements.¶¶Material: Low-Density Polyethylene¶¶Colour*: Red", "grpatr": "B (in)|B (mm)|C (in)|C (mm)|To Fit Thread Size (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1435", "clsnbr": "1101110212", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "PDF Series (for Flat-Faced O-Ring Fittings)", "imgnme": "DMR_PDFSeries_400x400.jpg|DMR_PDFSeries_drawing_670x570.jpg", "notes": "Series PDF Plugs are designed for easy mechanical or hand installation on flat-faced O-ring fittings.¶¶¶Material: Low-Density Polyethylene¶¶Colour*: Red", "grpatr": "B (in)|B (mm)|C (in)|C (mm)|To Plug Nominal Tubing Size (in)|To Fit Thread Size (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1436", "clsnbr": "1101110213", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "PDH Series (Flat-Faced O-Ring Hydraulic Fittings)", "imgnme": "DMR_PDHSeries_400x400.jpg|DMR_PDHSeries_drawing_370x440.jpg", "notes": "Series PDH plugs are designed for flat-faced O-ring hydraulic fittings and can be easily installed and removed with an allen wrench. Series PDH offers a universal design with standard thread pitches and seal flush against an O-ring.¶¶¶Material: High-Density Polyethylene ¶¶Colour: Red", "grpatr": "B (in)|B (mm)|C (in)|C (mm)|Fit Thread Size (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1437", "clsnbr": "1101110214", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "PDI Series (for Inverted Flared Fittings)", "imgnme": "DMR_PDISeries_400x400.jpg|DMR_PDISeries_drawing_370x570.jpg", "notes": "Series PDI Plugs are made for use on inverted flared fittings. Knurled for ease of application, they will seal with light finger tightening. Series PDI Plugs will seal boss type fittings without gaskets.¶¶Material: Low-Density Polyethylene¶¶Colour*: Red", "grpatr": "B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Fit Thread Size (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1438", "clsnbr": "1101110215", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "PDO Series (SAE Straight-Threaded O-Ring Ports)", "imgnme": "DMR_PDOSeries_400x400.jpg|DMR_PDOSeries_drawing_470x520.jpg", "notes": "Series PDO Plugs provide positive sealing for SAE straight-threaded O-ring type ports and MIL-MS-33649 bosses on fluid power components. Integral O-ring type bead seats in the bevel of the port to prevent oil leakage or entrance of contaminants. Seal at outside of knurl protects port face against paint and dirt.¶¶¶Material: High-Density Polyethylene¶¶Colour: Red", "grpatr": "B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Fit Thread Size (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1439", "clsnbr": "1101110216", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "RP Series (Threaded Plugs)", "imgnme": "DMR_RPSeries_400x400.jpg|DMR_RPSeries_drawing1 [Converted]_670x470.jpg|DMR_RPSeries_drawing2_670x400.jpg", "notes": "Originated for automotive and air conditioning tube fittings, Series RP is a general purpose, high strength, machine threaded plug adaptable to a multitude of applications. Serrated for finger tightening, they also have a slotted hex head for screw driver, nutdriver or wrench installation where desired.¶¶¶Material: Polypropylene¶¶Colour: Red, RP-M** White¶¶Applicable Specs: MIL-C-52078, MIL-C-5501/2, MIL-C-5501/10, NAS 838¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Plug Thread Size|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1440", "clsnbr": "1101110217", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "RPO Series (Threaded Plugs)", "imgnme": "DMR_RPOSeries_400x400.jpg|DMR_RPOSeries_drawing_670x420.jpg", "notes": "Series RPO Plugs provide a positive seal on SAE straight- threaded ports. Integral O-ring type bead seats into bevel of threaded opening to prevent oil or fluid leakage. A lip on the flange compresses against the surface to keep contaminants from the spot face. Slotted, 12-point head for screwdriver, socket or wrench tightening.¶¶¶Material: High-Density Polyethylene¶¶Colour*: Red¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Plug Thread Size|12 Point Socket Size D|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1441", "clsnbr": "1101110218", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "RPO-M Series", "imgnme": "DMR_RPOMSeries_400x400.jpg|DMR_RPORPOMSeries_drawing_570x370.jpg", "notes": "Series RPO-M Plugs provide a dual seal on ISO fluid powersystem metric ports. An integral O-ring-type bead seats snugly into the bevel of the threaded opening to prevent oil or fluid leakage. A 12-point head makes it possible to tighten with socket or wrench.¶¶¶Material: Polypropylene¶¶Colour*: Green RPO-M 12x1.5 stocked in Blue¶RPO-M 13x1.5 Stocked in Black", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Plug Thread Size (mm)|12 Point Socket Size D|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1442", "clsnbr": "1101110219", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "TB Series (BSP General-Purpose Plugs)", "imgnme": "DMR_TBSeries_400x400.jpg|DMR_TBSeries_drawing_470x670.jpg", "notes": "Designed to protect British Standard Pipe fittings, from contaminants and damage while providing protection for delicate threads. These plugs can be tightened with a screwdriver, hex wrench, or manually. TB plugs meet low-pressure testing requirements. ¶¶Material: Linear Low Density Polyethylene¶¶Colour: Yellow", "grpatr": "B (mm)|C (mm)|D (mm)|Plug BSP Thread Size|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1443", "clsnbr": "1101110220", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "TH Series (Hex Socket Plugs)", "imgnme": "DMR_THSeries_400x400.jpg|DMR_THSeries_drawing_470x570.jpg", "notes": "Socket design allows for threads to be protected during low-pressure testing and in-plant processing. The TH series is commonly used to keep contaminants and moisture from threaded ports. These plugs are oil- and heat-resistant to 250F. This series is not intended for permanent applications. ¶¶Material: High-Density Polyethylene¶¶Colour: Black¶¶Applicable Spec: MIL-C-5501/5, NAS 840", "grpatr": "B (in)|B (mm)|C (in)|C (mm)|Plug NPT Thread Size|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1444", "clsnbr": "1101110221", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "TM Series (Metric General-Purpose Plugs)", "imgnme": "DMR_TMSeries_400x400.jpg|DMR_TMSeries_drawing_470x620.jpg", "notes": "The TM series is a metric, general purpose plug designed to protect metric threads from damage and contaminants. The knurled head and screwdriver slot allow for easy installation and removal.¶¶ ¶¶Material: Linear Low Density Polyethylene¶Colour: Yellow¶", "grpatr": "B (mm)|C (mm)|D (mm)|Plug Metric Thread Size|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1445", "clsnbr": "1101110222", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "TPN Series (Square-Head Plugs)", "imgnme": "DMR_TPNSeries_400x400.jpg|DMR_TPNSeries_drawing_470x570.jpg", "notes": "TPN plugs ar ideal for low-pressure testing and in-house handling. The square head design enables easy installation. These plugs protect threaded ports from damage, contamination and moisture. Resistant to oil and heat up to 250F, but not intended for permanent applications. ¶¶Material: High-Density Polyethylene¶¶Colour: Black ¶¶Applicable Specs: MIL-C-5501/5, NAS 840", "grpatr": "B (in)|B (mm)|C (in)|C (mm)|F (in)|F (mm)|Plug NPT Thread Size|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1446", "clsnbr": "1101110223", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "TPN-F Series (Square Head with Flange Plugs)", "imgnme": "DMR_TPN-FSeries_400x400.jpg|DMR_TPN-FSeries_drawing_470x570.jpg", "notes": "The flange design protects the circumference of the port while simultaneously protecting the threads from damage, contaminants and moisture. The TPN-F series is commonly used for low-pressure testing and in-plant processing. These plugs combat oil and heat up to 250F. ¶¶Material: High Density-Polyethylene¶¶Colour: Black¶¶Applicable Specs: MIL-C-5501/5, NAS 840", "grpatr": "B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|F (in)|F (mm)|Plug NPT Thread Size|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2248", "clsnbr": "1101110224", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "TPSD Series", "imgnme": "DMR_TPSDSeries_400x400.jpg|DMR_TPSDSeries_drawing_470x670p.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003ESeries TPSD Threaded Plugs can be used for a wide variety of applications. These general purpose plugs are high strength and machine threaded. Each plug is serrated for easy finger tightening with a recessed square head drive for ease of installation and removal.\u003C/p\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EDurable\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EEasy to install or remove\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003EPolypropylene\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ERed\u003C/p\u003E", "grpatr": "To Fit Thread Size (in)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2246", "clsnbr": "1101110225", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "UPP Series", "imgnme": "DMR_UPPSeries-1_400x400.jpg|DMR_UPPSeries_drawing_670x660.jpg", "notes": "\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EThe UPP Series plugs for threaded ports, protect against dirt, debris, and other contaminants during shipping and/or production. Designed with a flexible pull tab and can be installed and removed easily without fastening or hand tools. Commonly used in the automotive and hydraulic markets.\u003C/p\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003ESize configurations to cover 25 different thread specifications including UN, Metric and BSP.\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cp style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; margin: 0px 0px 10px; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EMaterial:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ELow-density polyethylene\u003Cbr style=\u0022\u0022box-sizing: border-box;\u0022\u0022 /\u003E\u003Cstrong style=\u0022\u0022box-sizing: border-box; font-weight: bold;\u0022\u0022\u003EStandard Color:\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003E\u003C/strong\u003ERed\u003C/p\u003E", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]", "grpflg": "Y" }, { "clsnam": "1447", "clsnbr": "1101110226", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "UT Series (Unified Sealing Plugs)", "imgnme": "DMR_UTSeries_400x400.jpg|DMR_UTSeries_drawing_470x670.jpg", "notes": "The UT series is designed to protect unified/straight-threaded ports. Each plug features an integral tight fit sealing lip along with five complete threads. This design prevents contaminants from entering, whilekeeping fluids frome scapting, without the use of an additional o-ring. Teh UT series can be applied and removed with a screwdriver, socket wrench, power tool, or manually. ¶¶Material: High-Density Polyethylene¶¶Colour: Red", "grpatr": "B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Plug Thread Size (in)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1448", "clsnbr": "1101110227", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Threaded", "catnm5": "UTP Series (Universal Threaded Plugs)", "imgnme": "DMR_UTPSeries_400x400.jpg|DMR_UTPSeries_drawing_370x570.jpg", "notes": "UTP Universal Thread Plugs offer unique flexibility. Each plug is designed to fit many different thread sizes. Series UTP is excellent for easy installation by just pushing the plug into a female threaded port. A small turn is all that\u0027s required to lock the plug in place.¶¶¶Material: Low-Density Polyethylene¶¶Colour*: Red¶", "grpatr": "B (in)|B (mm)|C (in)|C (mm)|Fit Thread Size|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1364", "clsnbr": "11011103", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Vinyl", "catnm5": "", "imgnme": "lg_caplugs_etv-series_01.jpg", "notes": "Daemar offers a complete line of Caplug plugs designed to protect virtually any product for virtually any application. These plugs can be manufactured from low and high density polyethylene, silicone rubber, paper and vinyl (see vinyl section).¶¶¶¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1421", "clsnbr": "1101110301", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Vinyl", "catnm5": "ETV Series (Flexible Vinyl External Thread Plugs)", "imgnme": "DMR_ETVSeries_400x400.jpg|DMR_ETVSeries_drawing_500x570.jpg", "notes": "Series ETV external thread plugs are injection-molded vinyl. These flexible plugs can be easily pushed in and removed with no threading required. External threads hold plugs securely in place.¶¶Material: Vinyl¶¶Colour*: Black (80 Durometer)¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Plug Thread Size|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1422", "clsnbr": "1101110302", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Vinyl", "catnm5": "TP Series (Tapered Vinyl Plugs)", "imgnme": "DMR_TPSeries_400x400.jpg|DMR_TPSeries_drawing_370x670.jpg", "notes": "Series TP Vinyl Plugs are designed with a distinct tapered configuration, making them ideal for plugging small holes, ranging in diameter from .080\u0022 to .343\u0022. Flexibility of the vinyl allows these plugs to push in and pull out easily. They are color coded for ease of size identification. ¶¶If your application is exposed to extreme heat, try our HEZ series. The HEZ series is manufactured in our Flex500 material that offers heat resistance up to and beyond 500F. Caplugs Flex500 material maintains the same flexible nature of standard vinyl, but offers the added heat resistance for finishing appications such as powder coating, e-coating, and more.¶¶Material: Vinyl¶¶Colour: See Chart¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Colour|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1423", "clsnbr": "1101110303", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Plugs", "catnm4": "Vinyl", "catnm5": "VTP Series (Flexible Vinyl Tapered Plugs)", "imgnme": "DMR_VTPSeries_400x400.jpg|DMR_VTPSeries_drawing_470x670.jpg", "notes": "Series VTP Caplugs provide a snug fit when pushed into open ports, ensuring a tight closure that will not pop out accidentally during processing or shipping. A simple tug on the flanged lip of an installed VTP breaks the seal for easy removal. Molded from a specially formulated vinyl that is non-shredding and which offers an attractive, high gloss finish, providing a slick finish to products. ¶¶If your application is exposed to extreme heat, try our HEZ series. The HEZ series is manufactured in our Flex500 material that offers heat resistance up to and beyond 500F. Caplugs Flex500 material maintains the same flexible nature of standard vinyl, but offers the added heat resistance for finishing appications such as powder coating, e-coating, and more.¶¶Material: Vinyl¶¶Colour*: Red¶¶Optional Colours: White, Brown, Orange, Green, Gray, Blue, Yellow¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Fit Thread Size|Fit Thread Size|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1244", "clsnbr": "110112", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tapered Caps and Plugs", "catnm4": "", "catnm5": "", "imgnme": "Caplugs.jpg", "notes": "\u003CP\u003E\u003CSPAN class=body\u003ETapered caps and plugs - available in plastic, vinyl, and many other materials. \u003C/SPAN\u003E\u003C/P\u003E¶\u003CP\u003E\u003CSPAN class=body\u003E\u003CSPAN class=body\u003ETapered caps and plugs are used to protect a wide variety of tubing and threaded machined parts and ports from dust, moisture and impact damage. These caps and plugs also act as masking protection fro painting, plating, powder coating, and anodizing operations.\u003C/SPAN\u003E\u003CBR\u003E\u003C/SPAN\u003E\u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1262", "clsnbr": "11011201", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tapered Caps and Plugs", "catnm4": "T Series (Tapered Caps \u0026 Plugs)", "catnm5": "", "imgnme": "DMR_TSeries_400x400.jpg|DMR_TSeries_drawing_370x670.jpg", "notes": "\u003CP class=body\u003ETapered Caplugs can be used as either caps or plugs. Because they are tapered in design and made from highly pliable (or flexible) polyethylene, they can not only be applied to fit snugly but are readily removable...whether used for capping or plugging. Especially recommended for use on MIL Std. and SAE-type tube and hydraulic fittings and for threaded external and internal NPT fittings. \u003CBR\u003E\u003C/P\u003E\u003CP class=body\u003E\u003CSPAN class=subsubhead\u003EMaterial:\u003C/SPAN\u003E Low-Density Polyethylene, (Also available in green FlexTemp, a flexible thermoplastic rubber for extreme temperature applications ranging from -90 ºF to 300 ºF (-68 ºC to 149 ºC)). \u003C/P\u003E\u003CP class=body\u003E\u003CSPAN class=subsubhead\u003EColour*:\u003C/SPAN\u003E Red\u003CBR\u003E\u003CBR\u003E\u003CSPAN class=subsubhead\u003EApplicable Specs:\u003C/SPAN\u003E MIL-C-5501/7 (MIL-C-52078), NAS-834\u003CBR\u003E\u003C/P\u003E", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|F (in)|F (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1263", "clsnbr": "11011202", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tapered Caps and Plugs", "catnm4": "TV Series (Flexible Vinyl Tapered Caps \u0026 Plugs)", "catnm5": "", "imgnme": "DMR_TVSeries_400x400.jpg|DMR_TVSeries_drawing_370x670.jpg", "notes": "\u003CP class=body\u003EThe TV series features an injection-molded vinyl tapered design that can be used as a cap or a plug. Using an A-80 Shore durometer (hardness) vinyl, these caps resist tearing, cracking, splitting and shredding. Highly flexible, they enable snug fits even with smaller dimensions and irregular shapes; they are also easy to remove. \u003C/P\u003E", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|F (in)|F (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1264", "clsnbr": "11011203", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tapered Caps and Plugs", "catnm4": "W Series (Tapered Caps \u0026 Plugs with Wide Flanges)", "catnm5": "", "imgnme": "DMR_WSeries_400x400.jpg|DMR_WSeries_drawing_470x670.jpg", "notes": "\u003CP class=body\u003EFeaturing a wider flange than standard Tapered Caplugs, the Series W offers added protection for bearing surfaces and cannot be accidentally pushed all the way into or through an opening being plugged. \u003C/P\u003E¶\u003CP class=body\u003E\u003CSPAN class=subsubhead\u003EMaterial:\u003C/SPAN\u003E Low-Density Polyethylene\u003C/P\u003E¶\u003CP class=body\u003E\u003CSPAN class=subsubhead\u003EColour*:\u003C/SPAN\u003E Red\u003CBR\u003E\u003C/P\u003E", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|F (in)|F (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1342", "clsnbr": "11011204", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tapered Caps and Plugs", "catnm4": "WW Series (Tapered with Wide, Thick Flange)", "catnm5": "", "imgnme": "DMR_Caplugs_WW-Series_400x400.jpg|DMR_Caplugs_WW-Series_drawing_386x741.jpg", "notes": "Accepted by the aircraft industry, Series WW Caps are designed with a wide, thick flange to ensure against being erroneously forced \u0022all the way through\u0022 when used as a plug. Available in 76 sizes, this versatile part may easily be used as a cap or plug, depending upon application. ¶¶Material: Low-Density Polyethylene¶¶Colour*: Yellow¶¶Applicable Spec: NAS 816¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|F (in)|F (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1345", "clsnbr": "11011205", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tapered Caps and Plugs", "catnm4": "WWX Series (with Extra-Wide, Extra-Thick Flange)", "catnm5": "", "imgnme": "DMR_WWXSeries_400x400.jpg|DMR_WWXSeries_drawing_470x670.jpg", "notes": "The extra wide flange of the WWX Series provides extended visibility. This dummy-proof design prevents the mating component from being installed without first removing the cap. Available in thirteen sizes, this versatile part may easily be used as a cap or plug depending on application. ¶¶Material: Low-Density Polyethylene¶¶Colour: Yellow¶¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|E (in)|E (mm)|F (in)|F (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "1251", "clsnbr": "110113", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "", "catnm5": "", "imgnme": "lg_caplugs_tro-series_01.jpg", "notes": "\u003Cspan class=\u0022body\u0022\u003EA range of products targeted towards the Packaging and Shipping industry. From clearview tubing and end caps to sleeve webbing and plastic vials.\u003C/span\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1624", "clsnbr": "11011301", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "ClearView Tubing", "catnm5": "", "imgnme": "lg_caplugs_tro-series_01.jpg", "notes": "A range of products targeted towards the Packaging and Shipping industry. From clearview tubing and end caps to sleeve webbing and plastic vials", "grpatr": "", "grpflg": "N" }, { "clsnam": "2290", "clsnbr": "1101130101", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "ClearView Tubing", "catnm5": "CSV Series", "imgnme": "DMR_CSVSeries_400x400.jpg|DMR_CSVSeries_drawing_470x670.jpg", "notes": "\u003Cspan style=\u0022\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003ECSV Series square vials meet a variety of packaging applications and are reusable. They offer good clarity to view contents and the square design prevents rolling and ease of stacking. \u003C/span\u003E¶\u003Cul style=\u0022\u0022box-sizing: border-box; margin-bottom: 10px; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; margin-top: 0px; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EPackaged in sets, including vials and caps\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EEasy removal cap\u003C/li\u003E¶\u003Cli style=\u0022\u0022box-sizing: border-box;\u0022\u0022\u003EPrinting option for both vial and cap\u003C/li\u003E¶\u003C/ul\u003E¶\u003Cstrong style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: bold 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003EMaterial:\u003C/strong\u003E\u003Cspan style=\u0022\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u0022\u003E\u003Cspan class=\u0022\u0022Apple-converted-space\u0022\u0022\u003E \u003C/span\u003EPolypropylene\u003C/span\u003E\u003Cbr style=\u0022\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; backgro", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1795", "clsnbr": "1101130102", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "ClearView Tubing", "catnm5": "TRC Heavy Wall Series", "imgnme": "DMR_TRCSeries_400x400.jpg|DMR_TRCSeries_drawing_670x620.jpg", "notes": "Series TRC heavy wall ClearView® Tubing has a clear closed end. Heavy wall thickness adds extra protection and durability. The TRC series is available in a variety of lengths and ranges from .5\u0022 to 3.570 in diameter to meet all of your packaging needs. Material: PETG Color: Natural (Clear )", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1794", "clsnbr": "1101130103", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "ClearView Tubing", "catnm5": "TRC Series Standard Series", "imgnme": "DMR_TRCSeries_Standard_400x400.jpg|DMR_TRCSeries_drawing_670x620.jpg", "notes": "Series TRC Standard Wall ClearView. Tubing has a clear closed end. The TRC Series is available in a variety of lengths to meet all of your packaging needs.¶Material: PETG¶Colour: Natural (clear)", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1800", "clsnbr": "1101130104", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "ClearView Tubing", "catnm5": "TRO Heavy Wall Series", "imgnme": "DMR_TROSeries_Heavy_400x400.jpg|DMR_TROSeries_drawing_670x620.jpg", "notes": "Series TRO Heavy Wall ClearView plastic tubing provides the product protection you need for your heavy-duty packaging applications. Heavy Wall thickness adds extra protection and durability.¶¶Material: PETG¶Colour: Natural (Clear)", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1799", "clsnbr": "1101130105", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "ClearView Tubing", "catnm5": "TRO Standard Wall Series", "imgnme": "DMR_TROSeries_Standard_400x400.jpg|DMR_TROSeries_drawing_670x620.jpg", "notes": "Series TRO Standard Wall ClearView. Plastic tubing provides the product protection you need for your standard packaging applications. Whether you need to package, ship, store, or display your product. Series TRO clear plastic tubing will protect your investment. ClearView tubing provides the same clearness as acrylic or glass, minimizes scratching, features cleaner and straighter edges, and offers flexibility and impact resistance. Tubing is available in custom diameters and lengths to accommodate any project. Material: PETG Colour: Natural (Clear)¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1715", "clsnbr": "1101130106", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "ClearView Tubing", "catnm5": "TSC Series", "imgnme": "sm_tsc_series_silo-150.jpg", "notes": "Caplugs ClearView plastic tubing offers unique packaging and glass-like clarity. These closed-end tubes are an ideal package for a wide variety of products. The tubing has no side seams and the clear bottom is sonic welded for a secure seal. From industrial to consumer ended products, your end-user will appreciate this attractive and reusable package. ¶¶Material: PETG¶Color: Natural (Clear)¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1716", "clsnbr": "1101130107", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "ClearView Tubing", "catnm5": "TSO Series", "imgnme": "sm_tso_series_silo-150.jpg", "notes": "Caplugs ClearView plastic tubing offes unique packaging and a glass-like clarity. These open-ended tubes make an ideal package for a wide variety of products. The tubing has no side seams and is open at both ends. From industrial to consumer products, your end-user will appreciate this reusable package. ¶¶Material: PETG¶Color: Natural (Clear)¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1625", "clsnbr": "11011302", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Containers", "catnm5": "", "imgnme": "lg_caplugs_cvv-series_01.jpg", "notes": "A range of products targeted towards the Packaging and Shipping industry. From clearview tubing and end caps to sleeve webbing and plastic vials.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1717", "clsnbr": "1101130201", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Containers", "catnm5": "CVC Series", "imgnme": "sm_cvc_series_silo-150.jpg", "notes": "Plastic containers with a tethered top to ensure it\u0027s not lost. Use these containers to package your product and offer the end-user a reusable case to store the product. These containers are ideal for everything from fishing lures to cosmetics. An ideal package for displaying your product while providing value added storage to the end user.¶¶Material: Polypropylene¶Color: Natural¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Mini Pak|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1718", "clsnbr": "1101130202", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Containers", "catnm5": "CVV Series", "imgnme": "sm_cvv_series_silo-150.jpg", "notes": "Caplugs line of vials is ideal for a wide range of packaging applications. Available in translucent clear or a variety of opaque colors. These vials are a unique packaging alternative that offer the end-user a reusable container. vial caps are manufactured with a convenient thumb-tab for easy removal. Both the vial and cap can be pad-printed with your company name, logo, or product information. Packaged in sets including vials and caps.¶¶Material: Polypropylene¶Color: Natural¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1626", "clsnbr": "11011303", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Netting", "catnm5": "", "imgnme": "lg_caplugs_sw-standard-series_01.jpg", "notes": "A range of products targeted towards the Packaging and Shipping industry. From clearview tubing and end caps to sleeve webbing and plastic vials.¶¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1719", "clsnbr": "1101130301", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Netting", "catnm5": "CBW Series", "imgnme": "sm_cbw_series_silo-150.jpg", "notes": "Series CBW is a tough yet flexible netting that provides surface and impact protection for bottles of any size and shape. Since the netting is extruded rather than woven, the strands will not separate, weaken or spread unevenly. The diamond mesh design allows for production in a wide range of strengths, stretch capabilities and elasticity to satisfy all types of protection needs. ¶¶Material: Low-Density Polyethylene¶Color: Black¶Option Colors: Natural, Red, Green¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton", "grpflg": "Y" }, { "clsnam": "1720", "clsnbr": "1101130302", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Netting", "catnm5": "PMW Series", "imgnme": "sm_pmw_series_silo-150.jpg", "notes": "Flexible Series PM Net Sheeting provides excellent protection from impact or abrasion damage. Use as a separator for stacked parts during storage, handling and shipment or as protective wrap for bulky items. Unlike wood, styrofoam or cardboard, it will not deteriorate on contact with solvents, coatings, slushing oils or rust inhibitors.¶¶Material: Low-Density Polyethylene¶Colors: Yellow, Blue, Red¶¶", "grpatr": "Colour Code|Mesh Thickness (in)|Mesh Thickness (mm)|Strands|Strands|Coil - Size|Coil - Size", "grpflg": "Y" }, { "clsnam": "1723", "clsnbr": "1101130303", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Netting", "catnm5": "SW Series (Heavy Duty Series)", "imgnme": "sm_sw heavy_series_silo-150.jpg", "notes": "Heavy Duty Sleeve-Web [approx. .060\u0022 (1.52 mm) thick] has a thicker extrusion, more strands, and closer spacing. It offers an extra measure of protection for valuable precision components like heavy duty truck parts, screw cylinders, spline shafts, couplings, roller bearing assemblies, pistons, and heavy threaded fittings. Eliminates the high cost and time-consuming labor associated with traditional protective wrappings like paper, cardboard, styrofoam or wood.¶¶Material: Low-Density Polyethylene¶Color: See chart¶¶", "grpatr": "To Fit O.D. (in)|To Fit O.D. (mm)|Colour Code|Standard Coil - Size|Standard Coil - Size|Mini Coil - Size|Mini Coil - Size", "grpflg": "Y" }, { "clsnam": "1722", "clsnbr": "1101130304", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Netting", "catnm5": "SW Series (Light Series)", "imgnme": "sm_sw light_series_silo-150.jpg", "notes": "Light-Duty Sleeve-Web provides light-duty protection. Ideal for irregular-shaped parts,it stretches easily to twice its diameter, while its elastic properties allow it to pull tightly around smaller sections. Provides inexpensive, attractive, easily applied wrapping for long, narrow items such as wires,glass rods, tubing and rolled papper. Web thickness is approximately .060\u0022(1.52mm)¶¶Materila: Low-Density Polyethylene Color: See Chart", "grpatr": "To Fit O.D. (in)|To Fit O.D. (mm)|Colour Code|Standard Coil - Size|Standard Coil - Size|Mini Coil - Size|Mini Coil - Size", "grpflg": "Y" }, { "clsnam": "1721", "clsnbr": "1101130305", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Netting", "catnm5": "SW Series (Standard Series)", "imgnme": "sm_sw standard_series_silo-150.jpg", "notes": "Standard-Duty Sleeve-Web provides low-cost protection against physical damage to exterior surfaces of machined,polished,plated,coated or threaded cylindrical parts. Its elasticity ensures a snug fit and a nonslip grip on straight-sided parts and those with tapered or varying contours. Web thickness is approximately .070 (1.78mm).¶¶Material: Low-Density Polyethylene¶Colour: See Chart.", "grpatr": "To Fit O.D. (in)|To Fit O.D. (mm)|Colour Code|Standard Coil - Size|Standard Coil - Size|Mini Coil - Size|Mini Coil - Size", "grpflg": "Y" }, { "clsnam": "1623", "clsnbr": "11011304", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Tubing and Packaging", "catnm5": "", "imgnme": "lg_caplugs_te-series_01.jpg", "notes": "A range of products targeted towards the Packaging and Shipping industry. From clearview tubing and end caps to sleeve webbing and plastic vials.¶¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "1705", "clsnbr": "1101130401", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Tubing and Packaging", "catnm5": "Packaging Cap Series", "imgnme": "sm_packagingcaps_series_silo-150.jpg", "notes": "These packaging caps have molded rings on the interior surface to ensure a snug fit into the tube. Designed primarily for cardboard mailing and packaging tubes, these fit most standard tube sizes. A ribbed exterior assists in removal.¶¶Material: Low-Density Polyethylene¶Color: Orange¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton[Carton]|Packaging - Mini Pak[Mini Pak]", "grpflg": "Y" }, { "clsnam": "2292", "clsnbr": "1101130402", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Tubing and Packaging", "catnm5": "SCP Series", "imgnme": "SCPSeries_silo.jpg|SCPSeries_app.jpg", "notes": "\u003Cspan style=\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003ESCP Series protectors were developed as a packaging and shipping container cap to protect an exposed NPT fitting. Our wide and semi-rigid pinwheel design increases the surface area in contact with cardboard packaging, and is flexible enough to absorb the force at the point of impact, preventing breakthroughs, which can ultimately lead to extensive damage. \u003C/span\u003E\u003Cbr style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022 /\u003E\u003Cbr style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022 /\u003E\u003Cstrong style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: bold 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003EMaterial:\u003C/strong\u003E\u003Cspan style=\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003E\u003Cspan class=\u0022Apple-converted-space\u0022\u003E \u003C/span\u003ELow-density polyethylene\u003C/span\u003E\u003Cbr style=\u0022box-sizing: bo", "grpatr": "Press Fit for NPT Size (in)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1706", "clsnbr": "1101130403", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Tubing and Packaging", "catnm5": "STP Series", "imgnme": "sm_stp_series_silo-150.jpg", "notes": "Series STP shallow tube plugs are an ideal closure for container tubes used for packaging, shipping or mailing. They are designed to fit snugly in the tube end. The narrow flange ensures that there is no over-hanging projection to catch on other tubes.¶¶Material: Low Density Polyethylene¶Standard Color: White¶", "grpatr": "Nominal Tube I.D. (in)|Nominal Tube I.D. (mm)|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|D (in)|D (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1707", "clsnbr": "1101130404", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Tubing and Packaging", "catnm5": "TE Series", "imgnme": "sm_te_series_silo-150.jpg", "notes": "Series TE end caps have been designed to fit Caplugs\u0027 ClearView® line of plastic tubing. The TE series fits securely into our tubing to create attractive and unique packaging. While this series was developed for our tubing, its versatile design makes it ideal for a variety of packaging applications.¶¶Material: Low-Density Polyethylene¶Color: Black¶¶", "grpatr": "Fits Tube Size|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1708", "clsnbr": "1101130405", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Tubing and Packaging", "catnm5": "TE-HNG Series", "imgnme": "sm_tehng_series_silo-150.jpg", "notes": "Use our hanger plugs with our closed-end tubes for a fun, novel, and inexpensive package. Our plugs have a step design allowing them to be pushed into a tube until they click into place securing the contents of the tube. Developed with a large hole in the top to fit a variety of retail fixtures and displays.¶¶Material: Low-Density Polyethylene¶Color: Black¶", "grpatr": "Fits Tube Size|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1709", "clsnbr": "1101130406", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Tubing and Packaging", "catnm5": "TE-TAB Series", "imgnme": "sm_tetab_series_silo-150.jpg", "notes": "Series TE-TAB end caps have been designed to fit Caplugs\u0027 ClearView® line of plastic tubing. The TE-TAB series fits securely into our tubing with a thumb tab for easy removal. While this series was developed for our tubing, its versatile design makes it ideal for a variety of packaging applications.¶¶Material: Low-Density Polyethylene¶Color: Black¶¶", "grpatr": "Fits Tube Size|A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "2294", "clsnbr": "1101130407", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Tubing and Packaging", "catnm5": "TSE Series", "imgnme": "TSESeries_silo.jpg|TSESeries_app.jpg", "notes": "\u003Cspan style=\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003EThe TSE Series tube square ends were designed to plug TSC Series square tubing. The TSE fits securely into tubing to create attractive and unique packaging.\u003C/span\u003E\u003Cbr style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022 /\u003E\u003Cbr style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022 /\u003E\u003Cstrong style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: bold 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003EMaterial:\u003C/strong\u003E\u003Cspan style=\u0022white-space: normal; word-spacing: 0px; text-transform: none; float: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; -webkit-text-stroke-width: 0px;\u0022\u003E\u003Cspan class=\u0022Apple-converted-space\u0022\u003E \u003C/span\u003ELow-density polyethylene\u003C/span\u003E\u003Cbr style=\u0022box-sizing: border-box; white-space: normal; word-spacing: 0px; text-transform: none; color: #333333; font: 12px/17.14px \u0027Helvetica Neue\u0027, Helvetica, Arial, sans-serif; widows: 1; letter-spacing: normal; background-c", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1710", "clsnbr": "1101130408", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Tubing and Packaging", "catnm5": "VHC Series", "imgnme": "sm_vhc_series_silo-150.jpg", "notes": "Series VHC Vinyl Hanger Caps are round with a hanger tip. Ideal for tools that need to be hung, these caps provide a tight fit to prevent caps from falling off. Series VHC works well with Caplugs ClearView tubing line.¶¶Material: Vinyl¶Color: Black¶Optional Colors: White, Brown, Orange, Red, Green, Gray, Blue, Yellow¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1711", "clsnbr": "1101130409", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Tubing and Packaging", "catnm5": "VHR Series", "imgnme": "sm_vhr_series_silo-150.jpg", "notes": "Series VHR Vinyl Hanger Tip Caps are round with a hanger tip that sits to the side, allowing parts to hang down smoothly. Designed for tools that need to be hung, these caps provide a snug fit to ensure caps do not fall off. Series VHR works well with Caplugs ClearView tubing line.¶¶Material: Vinyl¶Color: Black¶Optional Colors: White, Brown, Orange, Red, Green, Gray, Blue, Yellow¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1712", "clsnbr": "1101130410", "catnm1": "Protective Closures", "catnm2": "Caplugs® By Product Type", "catnm3": "Tubing and Packaging Netting", "catnm4": "Tubing and Packaging", "catnm5": "VSE Series", "imgnme": "sm_vse_series_silo-150.jpg", "notes": "Used to close the ends of clear tubing, Series VSE Vinyl Square End Caps are equipped with a square head to prevent products from rolling around during shipment. This square head also allows containers to stand upright. VSE Series works well with Caplugs ClearView tubing line. ¶¶Material: Vinyl¶Color: Black¶Optional Colors: White, Brown, Orange, Red, Green, Gray, Blue, Yellow¶", "grpatr": "A (in)|A (mm)|B (in)|B (mm)|C (in)|C (mm)|Packaging - Carton|Packaging - Mini Pak", "grpflg": "Y" }, { "clsnam": "1010", "clsnbr": "12", "catnm1": "Kits \u0026 Packaging", "catnm2": "", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_Kits_500x500.jpg", "notes": "As a value added benefit Daemar\u0027s Packaging and Branding Group designs and assembles kits for customer specific requirements such as MRO applications. These kits are branded with labels that include our customers logos, part numbers and bar codes and packaged to provide easy access and the convenience of portablility. Kits are effective tools for reducing costs for maintenance and assembly staff by eliminating the guess work in part selection and saving time in part sorting.¶Additionally, Standard Kits are available for O-Rings, Quad-Rings, Retaining Rings, Keystock, Shimstock, and Woodruff Keys as well as the Daemar Pack Program for O-Rings and Retaining Rings.¶", "grpatr": "", "grpflg": "N" }, { "clsnam": "2617", "clsnbr": "1201", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® Keystock Kits", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "Mak-A-Key-02.jpg|Mak-A-Key-02.jpg", "notes": "\u003Cp\u003EImperial and Metric Keystock Kits \u003Cbr /\u003EMaterials: Steel (Zinc plating), Stainless Steel, Brass \u003C/p\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1138", "clsnbr": "120101", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® Keystock Kits", "catnm3": "Standard Assortments of Square Keystock", "catnm4": "", "catnm5": "", "imgnme": "DMR_StandardKey-01.jpg", "notes": "\u003Cb\u003ESize 12\u0022 Length\u003C/b\u003E¶\u003Cbr\u003E1/8\u0022 Square (5 of Bars)¶\u003Cbr\u003E3/16\u0022 Square (5 of Bars)¶\u003Cbr\u003E1/4\u0022 Square (5 of Bars)¶\u003Cbr\u003E5/16\u0022 Square (5 of Bars)¶\u003Cbr\u003E3/8\u0022 Square (5 of Bars)¶\u003Cbr\u003E7/16\u0022 Square (3 of Bars)¶\u003Cbr\u003E1/2\u0022 Square (3 of Bars)¶\u003Cbr\u003ETotal 31", "grpatr": "Material|Shipping Weight", "grpflg": "Y" }, { "clsnam": "1133", "clsnbr": "120102", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® Keystock Kits", "catnm3": "Standard Assortments of Square Keystock - Metric", "catnm4": "", "catnm5": "", "imgnme": "DMR_StandardKey-01.jpg", "notes": "\u003Cb\u003ESize 12\u0022 Length\u003C/b\u003E¶\u003Cbr\u003E4 MM (5 pcs of Bars)¶\u003Cbr\u003E5MM (5 pcs of Bars)¶\u003Cbr\u003E6MM (5 pcs of Bars)¶\u003Cbr\u003E7MM (5 pcs of Bars)¶\u003Cbr\u003E8MM (5 pcs of Bars)¶\u003Cbr\u003E10MM (3 pcs of Bars)¶\u003Cbr\u003E12MM (3 pcs of Bars)¶\u003Cbr\u003ETotal 31", "grpatr": "Shipping Weight", "grpflg": "Y" }, { "clsnam": "1058", "clsnbr": "1202", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® O-Ring Kits", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "dmr-o-ring-kit-ork-2-imperial-buna.jpg", "notes": "Daemar offers O-Ring kits in a range of materials and AS-568, Metric and Boss sizes. O-Rings Splicing Kits are available for your custom applications.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1065", "clsnbr": "120201", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® O-Ring Kits", "catnm3": "Boss O-Ring Kits", "catnm4": "", "catnm5": "", "imgnme": "DMR_Boss-O-Ring-Kit_01.jpg", "notes": "\u003CP\u003EKits of O-Ring sizes for Boss Tube Fittings. These are available in 90 Duro Buna-N and (0 Duro Viton materials\u003C/P\u003E\u003CP\u003EApplication: providing a seal for straight-thread tube fittings on a boss. \u003CBR\u003ENumbering System: The two digits after the -9 represent the Tube Size O.D. in 16ths of an inch. For example -905 is sized for a Tube O.D. of 5/16\u0022. The one exception is for -901 where the Tube Size O.D. is 3/32\u0022.\u003C/P\u003E\u003Cul\u003E\u003Cli\u003E90 Duro Buna-N (Nitrile/NBR)\u003C/li\u003E\u003Cli\u003E90 Duro Viton\u003C/li\u003E\u003C/ul\u003E", "grpatr": "Size - Quantity|Material", "grpflg": "Y" }, { "clsnam": "1061", "clsnbr": "120202", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® O-Ring Kits", "catnm3": "O-Ring Kits - Inch Buna", "catnm4": "", "catnm5": "", "imgnme": "dmr-o-ring-kit-ork-2-imperial-buna.jpg", "notes": "Featuring our popular ORK-2 kit: 30 sizes and 382 rings. Sizes ranging from 006 (1/8 ID, 1/16 width) up to 327 (1-3/4 ID, 3/16 width), in Buna-N 70 Black.", "grpatr": "Size - Quantity", "grpflg": "Y" }, { "clsnam": "1062", "clsnbr": "120203", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® O-Ring Kits", "catnm3": "O-Ring Kits - Metric", "catnm4": "", "catnm5": "", "imgnme": "dmr-o-ring-kit-ork-2-imperial-buna.jpg", "notes": "Metric O-Ring Kits feature metric size o-rings and are available in both Buna and Viton materials.", "grpatr": "Size - Quantity", "grpflg": "Y" }, { "clsnam": "1112", "clsnbr": "120204", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® O-Ring Kits", "catnm3": "O-Ring Kits -- Inch Viton", "catnm4": "", "catnm5": "", "imgnme": "dmr-o-ring-kit-ork-2-imperial-buna.jpg", "notes": "Featuring our popular ORK-1-V kit: 30 sizes and 382 rings. Sizes ranging from 006 (1/8 ID, 1/16 width) up to 327 (1-3/4 ID, 3/16 width), in Viton (FKM) Brown.", "grpatr": "Size - Quantity", "grpflg": "Y" }, { "clsnam": "1063", "clsnbr": "120205", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® O-Ring Kits", "catnm3": "Quad Ring Kits", "catnm4": "", "catnm5": "", "imgnme": "DMR_QuadRingKits_500x500.jpg", "notes": "Daemar\u0027s quad-ring kits offer convenience and easy use, making them the ideal solution for maintenance applications. Buna \u0027N\u0027 material.", "grpatr": "Size - Quantity", "grpflg": "Y" }, { "clsnam": "1064", "clsnbr": "120206", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® O-Ring Kits", "catnm3": "Splicing Kits - Inch", "catnm4": "", "catnm5": "", "imgnme": "DMR_O-Ring_SpliceKit-01.jpg", "notes": "Make your own custom o-ring for applications where a standard size o-ring won\u0027t fit. The kit contains a cutting blade, adhesive, and a splicing and cutting tool. Each kit contains several pieces of inch diameter o-ring cord. Available in Buna \u0027N\u0027 and Viton material.", "grpatr": "Size - Length|Material", "grpflg": "Y" }, { "clsnam": "1113", "clsnbr": "120207", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® O-Ring Kits", "catnm3": "Splicing Kits - Metric", "catnm4": "", "catnm5": "", "imgnme": "DMR_O-Ring_SpliceKit-01.jpg", "notes": "Make your own custom metric o-ring for applications where a standard size o-ring won\u0027t fit. The kit contains a cutting blade, adhesive, and a splicing and cutting tool. Each kit contains several pieces of metric diameter o-ring cord. Buna \u0027N\u0027 material.", "grpatr": "Size - Length|Material", "grpflg": "Y" }, { "clsnam": "1059", "clsnbr": "1203", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® Retaining Ring Kits", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "dmr-retaining-ring-kit-RRPK-1-300x300.jpg", "notes": "Daemar offers a range of inch and metric kits with both internal and external retaining rings.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1955", "clsnbr": "120301", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® Retaining Ring Kits", "catnm3": "Retaining Ring Kits \u0026 Pliers", "catnm4": "", "catnm5": "", "imgnme": "dmr-retaining-ring-kit-RRPK-1-300x300.jpg", "notes": "Retaining Ring kits with Internal, External Retaining Rings and with pliers.", "grpatr": "", "grpflg": "N" }, { "clsnam": "1957", "clsnbr": "12030101", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® Retaining Ring Kits", "catnm3": "Retaining Ring Kits \u0026 Pliers", "catnm4": "RRPK-1", "catnm5": "", "imgnme": "dmr-retaining-ring-kit-RRPK-1-300x300.jpg", "notes": "\u003CSPAN class=text1\u003E\u003CSPAN class=body\u003E\u003CSPAN class=body\u003E310 retaining rings and 1 pair of convertible pliers P/N 1120 (RP-1120). For both housings and shafts ranging in size from 3/8\u0022 to 1\u0022.\u003C/SPAN\u003E\u003C/SPAN\u003E\u003C/SPAN\u003E\u003CBR\u003E", "grpatr": "No. - Quantity", "grpflg": "Y" }, { "clsnam": "1965", "clsnbr": "12030102", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® Retaining Ring Kits", "catnm3": "Retaining Ring Kits \u0026 Pliers", "catnm4": "RRPK-2", "catnm5": "", "imgnme": "dmr-retaining-ring-kit-RRPK-2-300x300.jpg", "notes": "\u003CP\u003E112 rings , 1 Plier P/N 1340 (RP-340) Internal and external retaining rings ranging in sizes from 1-1/8\u0022 to 1-3/4\u0022\u003C/P\u003E\u003CP\u003E \u003C/P\u003E\u003CP\u003E \u003C/P\u003E", "grpatr": "No. - Quantity", "grpflg": "Y" }, { "clsnam": "1954", "clsnbr": "120302", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® Retaining Ring Kits", "catnm3": "Retaining Ring Kits Imperial", "catnm4": "", "catnm5": "", "imgnme": "DMR_Kits.jpg", "notes": "\u003CP\u003EKits contain Internal and External Retaining Rings. Come in a yellow case with all labels.\u003C/P\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1964", "clsnbr": "12030201", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® Retaining Ring Kits", "catnm3": "Retaining Ring Kits Imperial", "catnm4": "RRK-3", "catnm5": "", "imgnme": "DMR_Kits.jpg", "notes": "328 rings , housing and shaft sizes from 1/2\u0022 to 2\u0022 .", "grpatr": "No. - Quantity", "grpflg": "Y" }, { "clsnam": "2619", "clsnbr": "12030202", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® Retaining Ring Kits", "catnm3": "Retaining Ring Kits Imperial", "catnm4": "RRK-3-S", "catnm5": "", "imgnme": "DMR_Kits.jpg|DMR_Kits.jpg", "notes": "Stainless steel Imperial kit\u003Cbr /\u003E\u003Cspan style=\u0022font-size: 12.5px; font-family: \u0027Open Sans\u0027; white-space: normal; word-spacing: 0px; text-transform: none; float: none; font-weight: 400; color: #555555; font-style: normal; orphans: 2; widows: 2; display: inline !important; letter-spacing: normal; background-color: #ffffff; text-indent: 0px; font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial;\u0022\u003E328 rings , housing and shaft sizes from 1/2\u0022 to 2\u0022 .\u003C/span\u003E", "grpatr": "No. - Quantity", "grpflg": "Y" }, { "clsnam": "1958", "clsnbr": "120303", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® Retaining Ring Kits", "catnm3": "Retaining Ring Kits Metric", "catnm4": "", "catnm5": "", "imgnme": "MetricRetainingRingKit-Open-DIN471-472-K-300x300.jpg", "notes": "\u003Cspan class=\u0022body\u0022\u003E263 metric retaining rings. 78 rings for housings ranging in size from 12mm to 47mm and 185 rings for shafts ranging in size from 5mm to 25mm\u003C/span\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1960", "clsnbr": "12030301", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® Retaining Ring Kits", "catnm3": "Retaining Ring Kits Metric", "catnm4": "DIN471/472-K Carbon Steel Kit", "catnm5": "", "imgnme": "MetricRetainingRingKit-Open-DIN471-472-K-300x300.jpg", "notes": "\u003Cp\u003E263 metric retaining rings, 78 rings for housing ranging in size from 12mm to 47mm and 185 rings for shaft ranging in size from 5mm to 25mm. Material : Carbon Steel with Phosphate coating.\u003C/p\u003E¶\u003Cp\u003E\u003C/p\u003E", "grpatr": "", "grpflg": "N" }, { "clsnam": "1961", "clsnbr": "1203030101", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® Retaining Ring Kits", "catnm3": "Retaining Ring Kits Metric", "catnm4": "DIN471/472-K Carbon Steel Kit", "catnm5": "Din471/472-K", "imgnme": "sm_metric_retaining_ring_kits-1.jpg", "notes": "\u003Cp\u003E263 metric retaining rings, 78 rings for housing ranging in size from 12mm to 47mm and 185 rings for shaft ranging in size from 5mm to 25mm. Material : Carbon steel with Phosphate coating.\u003C/p\u003E", "grpatr": "No. - Quantity", "grpflg": "Y" }, { "clsnam": "1962", "clsnbr": "12030302", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® Retaining Ring Kits", "catnm3": "Retaining Ring Kits Metric", "catnm4": "DIN471/472KS Stainless Steel", "catnm5": "", "imgnme": "MetricRetainingRingKit-Open-DIN471-472-K-300x300.jpg", "notes": "263 metric retaining rings, 78 rings for housing ranging in size from 12mm to 47mm and 185 rings for shaft ranging in size from 5mm to 25mm. Material : Stainless Steel", "grpatr": "", "grpflg": "N" }, { "clsnam": "1963", "clsnbr": "1203030201", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® Retaining Ring Kits", "catnm3": "Retaining Ring Kits Metric", "catnm4": "DIN471/472KS Stainless Steel", "catnm5": "DIN471/472KS", "imgnme": "sm_metric_retaining_ring_kits-1.jpg", "notes": "\u003Cspan class=\u0022text1\u0022\u003E263 metric retaining rings, 78rings for housing ranging in size from 12mm to 47mm and 185 rings for shaft ranging in size from 5mm to 25MMMaterial : Stainless Steel \u003C/span\u003E", "grpatr": "No. - Quantity", "grpflg": "Y" }, { "clsnam": "1096", "clsnbr": "1204", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® Spring Pin Kits", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_SP_KIT_2_image.jpg|DMR_SpringPin_400x400.jpg", "notes": "2 sizes of spring pin assortment kits, the DMR SP1 kit contains 10 each of 12 sizes ranging in diameters from 1/16\u0022 to 1/8\u0022 and lengths from 1/4\u0022 up to 1-1/2\u0022. The DMR SP2 kit contains 10 each of 12 sizes ranging in diameters from 5/32\u0022 to 3/8\u0022 and lengths from 1\u0022 up to 1-3/4\u0022.", "grpatr": "Size - Quantity|Diameter Range|Length Range", "grpflg": "Y" }, { "clsnam": "1060", "clsnbr": "1205", "catnm1": "Kits \u0026 Packaging", "catnm2": "DMR® Woodruff Key Kits", "catnm3": "", "catnm4": "", "catnm5": "", "imgnme": "DMR_WoodruffKey-Kits-Open-500x500.jpg", "notes": "2 sizes of woodruff key assortment kits, A 90 key and 210 key kit. DMR woodruff keys are produced from 1035 Steel and are in standard SAE sizes.", "grpatr": "", "grpflg": "N" }, null]